M39006/33 www.vishay.com Vishay Wet Tantalum Capacitors, Extended Capacitance, Military Established Reliability Military MIL-PRF-M39006/33 Qualified, Style CLR93 FEATURES • Hermetically sealed • Tantalum cased • Axial lead • Tubular PERFORMANCE CHARACTERISTICS STYLE, MILITARY SPECIFICATION SHEET Operating Temperature: -55 °C to +85 °C (to +125 °C with voltage derating) Capacitance Range: 15 μF to 680 μF Capacitance Tolerance: ± 10 %, ± 20 % Voltage Rating: 50 VDC to 100 VDC Style CLR93, M39006/33 MIL-PRF-39006/33 DESCRIPTION Established reliability tantalum capacitors to military specification MIL-PRF-39006: In accordance with the military specification MIL-PRF-39006 all capacitors are marked with the military part number (M39006/xx-xxxx) rather than the older style designation (CLR93) and should be ordered as such. For information on the performance characteristics of these capacitors, please refer to the latest issue of the military specification. MIL-PRF-39006 establishes 1000 h failure rate levels of 1 %, 0.1 %, and 0.01 %. When ordering these parts, care must be exercised that the correct part number expressing the appropriate failure level be specified. Each order for military style capacitors requiring government inspection must state whether inspection is to be at the destination or at the Vishay plant. Orders requiring source inspection cannot be shipped until this has been accomplished. ORDERING INFORMATION M39006 /33 -0030 BASIC DOCUMENT NUMBER SLASH SHEET DASH NUMBER Indicates the basic specification; in this case MIL-PRF-39006 Indicates the specification sheet of the basic military specification Taken from Standard Ratings table DIMENSIONS in inches [millimeters] Tantalum feed-through 0.078 [1.98] max. dia. Style CLR93 Terminal welded to case 0.250 [6.35] max. Term. loc. within 0.031 [0.79] R of true position - + D dia. 0.094 [2.38] max. E External weld E L Case circuit diagram 0.025 ± 0.002 [0.64 ± 0.05] Glass Insulating sleeve BARE CASE CASE CODE T1 T2 T3 T4 Revision: 23-May-16 WITH INSULATING SLEEVE D L D (Max.) L (Max.) E LEAD LENGTH 0.188 ± 0.016 [4.78 ± 0.41] 0.281 ± 0.016 [7.14 ± 0.41] 0.375 ± 0.016 [9.52 ± 0.41] 0.375 ± 0.016 [9.52 ± 0.41] 0.453 + 0.031 / - 0.016 [11.51 + 0.79 / - 0.41] 0.641 + 0.031 / - 0.016 [16.28 + 0.79 / - 0.41] 0.766 + 0.031 / - 0.016 [19.46 + 0.79 / - 0.41] 1.062 + 0.031/- 0.016 [26.97 + 0.79/- 0.41] 0.219 [5.56] 0.312 [7.92] 0.406 [10.31] 0.406 [10.31] 0.515 [13.08] 0.704 [17.88] 0.828 [21.03] 1.126 [28.60] 1.500 ± 0.250 [38.10 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] WEIGHT (oz./g) (Max.) 0.10 [2.6] 0.24 [6.2] 0.46 [11.6] 0.62 [17.7] Document Number: 40190 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M39006/33 www.vishay.com Vishay RATINGS AND CASE CODES μF 15 33 47 68 110 150 220 330 390 470 560 680 50 V 60 V 75 V 100 V T1 T1 T1 T1 T2 T2 T2 T3 T4 T2 T3 T3 T3 T4 T4 T4 STANDARD RATINGS - CLR93, M39006/33-XXXX PART NO. MAX. (1) MAX. M39006/33MAX. MAX. MAX. CAPACITANCE MAX. DCL (μA) ESR RIPPLE FAILURE IMP. DF CAP. CHANGE (%) AT AT AT CURRENT CAPACITANCE CASE RATE LEVEL AT AT TOL. +25 °C AT +85 °C (μF) CODE (%/1000 h) -55 °C 25 °C (± %) 120 Hz 40 kHz () (%) +85 °C M P R () (mA) +25 °C -55 °C +85 °C +125 °C 1.0 0.1 0.01 +125 °C 50 VDC AT +85 °C; 30 VDC AT +125 °C 68 T1 20 0021 1 5 9.2 1.5 35 -25 8 15 1050 68 T1 10 0022 1 5 9.2 1.5 35 -25 8 15 1050 220 T2 20 0023 2 10 17.9 0.9 17.5 -50 8 15 1800 220 T2 10 0024 2 10 17.9 0.9 17.5 -50 8 15 1800 470 T3 20 0027 3 25 31.9 0.75 10 -50 8 15 2100 470 T3 10 0028 3 25 31.9 0.75 10 -50 8 15 2100 680 T4 20 0029 5 40 43.1 0.7 10 -58 10 20 2750 680 T4 10 0030 5 40 43.1 0.7 10 -58 10 20 2750 60 VDC AT +85 °C; 40 VDC AT +125 °C 47 T1 20 0031 1 5 8.5 2.0 44 -25 8 12 1050 47 T1 10 0032 1 5 8.5 2.0 44 -25 8 12 1050 150 T2 20 0033 2 10 14.9 1.1 20 -40 8 15 1650 150 T2 10 0034 2 10 14.9 1.1 20 -40 8 15 1650 390 T3 20 0037 3 25 31.8 0.9 15 -60 8 15 2100 390 T3 10 0038 3 25 31.8 0.9 15 -60 8 15 2100 560 T4 20 0039 5 40 40.5 0.8 10 -58 8 15 2750 560 T4 10 0040 5 40 40.5 0.8 10 -58 8 15 2750 75 VDC AT +85 °C; 50 VDC AT +125 °C 33 T1 20 0041 1 5 7.5 2.5 66 -25 5 9 1050 33 T1 10 0042 1 5 7.5 2.5 66 -25 5 9 1050 110 T2 20 0043 2 10 12.9 1.3 24 -35 6 10 1650 110 T2 10 0044 2 10 12.9 1.3 24 -35 6 10 1650 330 T3 20 0047 3 30 29.9 1.0 12 -45 6 10 2100 330 T3 10 0048 3 30 29.9 1.0 12 -45 6 10 2100 470 T4 20 0049 5 50 38.3 0.9 12 -55 8 12 2750 470 T4 10 0050 5 50 38.3 0.9 12 -55 8 12 2750 100 VDC AT +85 °C; 65 VDC AT +125 °C 15 T1 20 0051 1 5 4.8 3.5 125 -18 3 10 1050 15 T1 10 0052 1 5 4.8 3.5 125 -18 3 10 1050 68 T2 20 0053 2 10 12.9 2.1 37 -30 4 12 1650 68 T2 10 0054 2 10 12.9 2.1 37 -30 4 12 1650 150 T3 20 0057 3 25 21.7 1.6 22 -35 6 12 2100 150 T3 10 0058 3 25 21.7 1.6 22 -35 6 12 2100 220 T4 20 0059 5 50 23.9 1.2 15 -40 6 12 2750 220 T4 10 0060 5 50 23.9 1.2 15 -40 6 12 2750 Note (1) For ripple current limits at various temperatures, voltages, and frequencies, see “Ripple Current” table. Revision: 23-May-16 Document Number: 40190 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M39006/33 www.vishay.com Vishay CLR93 RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE, AND APPLIED PEAK VOLTAGE FREQUENCY OF APPLIED RIPPLE CURRENT AMBIENT STILL AIR % OF APPLIED VOLTAGE 120 Hz 800 Hz 1 kHz 10 kHz 40 kHz 100 kHz TEMP °C TEMP °C TEMP °C TEMP °C TEMP °C TEMP °C 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 100 % 0.60 0.39 - - 0.71 0.43 - - 0.72 0.46 - - 0.88 0.55 - - 1.0 0.63 - - 1.1 0.69 - - 90 % 0.60 0.46 - - 0.71 0.55 - - 0.72 0.55 - - 0.88 0.67 - - 1.0 0.77 - - 1.1 0.85 - - 80 % 0.60 0.52 0.35 - 0.71 0.62 0.42 - 0.72 0.62 0.42 - 0.88 0.76 0.52 - 1.0 0.87 0.59 - 1.1 0.96 0.65 - 70 % 0.60 0.58 0.44 - 0.71 0.69 0.52 - 0.72 0.70 0.52 - 0.88 0.85 0.64 - 1.0 0.97 0.73 - 1.1 1.07 0.80 - 66 2/3 % 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50 Notes 1. At +125 °C the rated voltage of the capacitors decreases to 66 2/3 % of the +85 °C rated voltage. 2. The peak of the applied AC ripple voltage plus the applied DC voltage must not exceed the DC voltage rating of the capacitor either forward or reverse. 3. The ripple current listed represents a rating calculated using a maximum internal temperature rise (T) of +50 °C at 40 kHz at + 85 °C ambient with a maximum peak rated voltage of 66 2/3 % of the +85 °C peak voltage rating. 4. The maximum allowable internal temperature rise (T) decreases linearly to a calculated +10 °C rise at +125 °C ambient. 5. The internal temperature rise is directly proportional to the equivalent series resistance of the capacitor and equivalent series resistance increases with decreasing frequency. Revision: 23-May-16 Document Number: 40190 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000