TCP-4182UB 8.2 pF Passive Tunable Integrated Circuits (PTIC) Introduction ON Semiconductor’s PTICs have excellent RF performance and power consumption, making them suitable for any mobile handset or radio application. The fundamental building block of our PTIC product line is a tunable material called ParaScant, based on Barium Strontium Titanate (BST). PTICs have the ability to change their capacitance from a supplied bias voltage generated by the Control IC. The 8.2 pF ultra−high tuning PTICs are available as wafer-level chip scale packages (WLCSP). www.onsemi.com WLCSP4 1.009x0.609 CASE 567LZ Key Features • • • • • • • Ultra−High Tuning Range and Operation up to 24 V Usable Frequency Range: from 700 MHz to 2.7 GHz High Quality Factor (Q) for Low Loss High Power Handling Capability Compatible with PTIC Control IC TCC-10x, 20x WLCSP Package: 0.609 x 1.009 x 0.310 mm (4 bump) These devices are Pb−Free and RoHS Compliant MARKING DIAGRAM Typical Applications • • • • Multi-band, Multi-standard, Advanced and Simple Mobile Phones Tunable Antenna Matching Networks Tunable RF Filters Active Antennas FUNCTIONAL BLOCK DIAGRAM PTIC RF1 RF2 Bias PTIC Functional Block Diagram ORDERING INFORMATION Device TCP−4182UB−DT Package Shipping† WLCSP4 (Pb−Free) 4000 Units / 7” Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2015 October, 2015 − Rev. 0 1 Publication Order Number: TCP−4182UB/D TCP−4182UB DC Bias 1 A1 A2 NC RF2 B1 B2 RF1 Figure 1. PTIC Functional Block Diagram Table 1. SIGNAL DESCRIPTIONS Ball / Pad Number Pin Name A1 DC Bias 1 DC Bias Voltage B1 RF2 RF Input / Output A2 NC Not Connected B2 RF1 RF Input / Output www.onsemi.com 2 Description TCP−4182UB TYPICAL SPECIFICATIONS Representative Performance Data at 255C Table 2. PERFORMANCE DATA Parameter Operating Bias Voltage Min Typ 1.0 Units 24 V Capacitance (Vbias = 2 V) 7.38 8.20 9.02 pF Capacitance (Vbias = 24 V) 1.640 1.822 2.002 pF Tuning Range (1 V - 24 V) 4.70 5.10 5.80 Tuning Range (2 V - 24 V) 4.10 4.50 5.20 Leakage Current (WLCSP) Operating Frequency 700 0.5 mA 2700 MHz Quality Factor @ 700 MHz, 10 V 100 Quality Factor @ 2.4 GHz, 10 V 70 IP3 (Vbias = 2 V) [1,3] 70 dBm 85 dBm -75 dBm -85 dBm -40 dBm IP3 (Vbias = 24 V) [1,3] 2nd Harmonic (Vbias = 2 V) [2,3] 2nd Harmonic (Vbias = 24 V) 3rd Harmonic (Vbias = 2 V) [2,3] [2,3] 3rd Harmonic (Vbias = 24 V) 1. 2. 3. 4. Max [2,3] -70 dBm Transition Time (Cmin ³ Cmax) [4] 80 ms Transition Time (Cmax ³ Cmin) [4] 70 ms f1 = 850 MHz, f2 = 860 MHz, Pin 25 dBm/Tone 850 MHz, Pin +34 dBm IP3 and Harmonics are measured in the shunt configuration in a 50 W environment RFIN and RFOUT are both connected to DC ground www.onsemi.com 3 TCP−4182UB Representative performance data at 255C for 8.2 pF WLCSP Package Figure 2. Capacitance Figure 3. Harmonic Power* Figure 4. IP3* Figure 5. Q* *Data shown is representative only. Table 3. ABSOLUTE MAXIMUM RATINGS Parameter Rating Units Input Power +40 dBm Bias Voltage +25 (Note 5) V Operating Temperature Range −30 to +85 °C Storage Temperature Range −55 to +125 °C ESD − Human Body Model Class 1B JEDEC HBM Standard (Note 6) Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 5. WLCSP: Recommended Bias Voltage not to exceed 24 V. 6. Class 1B defined as passing 500 V, but may fail after exposure to 1000 V ESD pulse. www.onsemi.com 4 TCP−4182UB ASSEMBLY CONSIDERATIONS AND REFLOW PROFILE The following assembly considerations should be observed: Cleanliness These chips should be handled in a clean environment. Electro-static Sensitivity ON Semiconductor’s PTICs are ESD Class 1B sensitive. The proper ESD handling procedures should be used. Mounting The WLCSP PTIC is fabricated for Flip Chip solder mounting. Connectivity to the RF and Bias terminations on the PTIC die is established through SAC305 solder balls with 65 mm nominal height (45 mm to 85 mm height variation). The PTIC die is RoHS-compliant and compatible with lead-free soldering profile. Molding The PTIC die is compatible for over-molding or under-fill. Figure 6. Reflow Profile ORIENTATION OF THE PTIC FOR OPTIMUM LOSSES RF When configuring the PTIC in your specific circuit design, at least one of the RF terminals must be connected to DC ground. If minimum transition times are required, DC ground on both RF terminals is recommended. To minimize losses, the PTIC should be oriented such that RF2 is at the lower RF impedance of the two RF nodes. A shunt PTIC, for example, should have RF2 connected to RF ground. ANT RF1 (PTIC Pad) RF2 (PTIC Pad) Bias Figure 7. PTIC Orientation Functional Block Diagram www.onsemi.com 5 TCP−4182UB PART NUMBER DEFINITION Table 4. PART NUMBERS Capacitance Part Number TCP−4182UB-DT 2V 24 V Package* 8.20 1.822 4-bump WLCSP *See PTIC package dimensions on following page. For information on device numbering and ordering codes, please download the Device Nomenclature technical note (TND310/D) from www.onsemi.com. www.onsemi.com 6 TCP−4182UB PACKAGE DIMENSIONS WLCSP4, 1.009x0.609 CASE 567LZ ISSUE O È PIN A1 REFERENCE E A B 4X 2X 4X b 0.05 C A B 0.03 C DETAIL A D 2X b1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. COPLANARITY APPLIES TO SPHERICAL CROWNS OF SOLDER BALLS. 4. BACKSIDE TAPE APPLIED TO IMPROVE PIN 1 MARKING. DIM A A1 b b1 D E e e1 0.05 C NOTE 4 TAPE 0.05 C TOP VIEW DETAIL C A 0.06 C DETAIL C 0.05 C A1 SIDE VIEW NOTE 3 C MILLIMETERS MIN MAX 0.275 0.345 0.045 0.085 0.079 0.129 0.044 0.094 1.009 BSC 0.609 BSC 0.420 BSC 0.400 BSC RECOMMENDED SOLDERING FOOTPRINT* 0.55 SEATING PLANE 4X 0.15 A1 e 0.55 PACKAGE OUTLINE DETAIL A e1 4X B 0.13 DIMENSIONS: MILLIMETERS A 1 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 2 BOTTOM VIEW ParaScan is a trademark of Paratek Microwave, Inc. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative TCP−4182UB/D