MBR1535CT D

MBR1535CTG,
MBR1545CTG
Switch-mode
Power Rectifier
Features and Benefits
•
•
•
•
•
•
•
www.onsemi.com
Center−Tap Configuration
Low Forward Voltage
Low Power Loss / High Efficiency
High Surge Capacity
175°C Operating Junction Temperature
15 A Total (7.5 A Per Diode Leg)
These Devices are Pb−Free and are RoHS Compliant*
SCHOTTKY BARRIER
RECTIFIERS
15 AMPERES
35 and 45 VOLTS
1
Applications
• Power Supply − Output Rectification
• Power Management
• Instrumentation
2, 4
3
MARKING
DIAGRAM
Mechanical Characteristics
•
•
•
•
•
•
Case: Epoxy, Molded
Epoxy Meets UL 94, V−0 @ 0.125 in
Weight: 1.9 Grams (Approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
ESD Rating:
Human Body Model = 3B
Machine Model = C
4
TO−220
CASE 221A
STYLE 6
1
2
AYWW
MBR15x5CTG
AKA
3
A
Y
WW
x
G
AKA
= Assembly Location
= Year
= Work Week
= 3 or 4
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2015
January, 2015 − Rev. 9
1
Publication Order Number:
MBR1535CT/D
MBR1535CTG, MBR1545CTG
MAXIMUM RATINGS
Rating
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage MBR1535CT
MBR1545CT
VRRM
VRWM
VR
Average Rectified Forward Current
(TC = 163°C)
Per Diode
Per Device
IF(AV)
Peak Repetitive Forward Current
(Square Wave, 20 kHz, TC = 161°C)
Value
Unit
V
35
45
A
7.5
15
IFRM
15
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
IFSM
150
A
Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz)
IRRM
1.0
A
Storage Temperature Range
Tstg
−65 to +175
°C
TJ
−65 to +175
°C
dv/dt
1000
V/ms
Per Diode
Operating Junction Temperature (Note 1)
Voltage Rate of Change (Rated VR)
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.
THERMAL CHARACTERISTICS PER DIODE
Characteristic
Symcbol
Value
Unit
Maximum Thermal Resistance, Junction−to−Case (Min. Pad)
RqJC
3.0
°C/W
Maximum Thermal Resistance, Junction−to−Ambient (Min. Pad)
RqJA
60
°C/W
ELECTRICAL CHARACTERISTICS PER DIODE
Characteristic
Symbol
Maximum Instantaneous Forward Voltage (Note 2)
(iF = 7.5 Amps, TJ = 125°C)
(iF = 15 Amps, TJ = 125°C)
(iF = 15 Amps, TJ = 25°C)
vF
Maximum Instantaneous Reverse Current (Note 2)
(Rated DC Voltage, TJ = 125°C)
(Rated DC Voltage, TJ = 25°C)
iR
Min
Typ
Max
−
−
−
0.47
0.63
0.66
0.57
0.72
0.84
−
−
10
0.025
15
0.1
Unit
V
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%
ORDERING INFORMATION
Device
Package
Shipping
MBR1535CTG
TO−220
(Pb−Free)
50 Units / Rail
MBR1545CTG
TO−220
(Pb−Free)
50 Units / Rail
www.onsemi.com
2
i , INSTANTANEOUS FORWARD CURRENT (AMPS)
F
i , INSTANTANEOUS FORWARD CURRENT (AMPS)
F
MBR1535CTG, MBR1545CTG
100
10
TJ = 150°C
125°C
1.0
75°C
25°C
0.1
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
100
10
TJ = 150°C
125°C
1.0
75°C
25°C
0.1
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
Figure 2. Maximum Forward Voltage
Figure 1. Typical Forward Voltage
100
100
TJ = 150°C
10
I , REVERSE CURRENT (mA)
R
I , REVERSE CURRENT (mA)
R
TJ = 150°C
125°C
100°C
1.0
75°C
0.1
25°C
0.01
0.001
0
10
20
125°C
10
100°C
1.0
75°C
0.1
25°C
0.01
30
0.001
50
40
0
10
VR, REVERSE VOLTAGE (VOLTS)
, AVERAGE FORWARD CURRENT (AMPS)
dc
10
SQUARE WAVE
8.0
6.0
4.0
F (AV)
2.0
145
150
155
160
165
170
I
, AVERAGE FORWARD CURRENT (AMPS)
F (AV)
I
14
140
50
40
Figure 4. Maximum Reverse Current
16
0
135
30
VR, REVERSE VOLTAGE (VOLTS)
Figure 3. Typical Reverse Current
12
20
175
16
RATED VOLTAGE APPLIED
14
RqJA = 16° C/W
RqJA = 60° C/W
(NO HEATSINK)
dc
12
10
8.0
dc
SQUARE WAVE
6.0
4.0
2.0
0
0
TC, CASE TEMPERATURE (C°)
25
50
75
100
125
150
TA, AMBIENT TEMPERATURE (°C)
Figure 5. Current Derating, Case Per Leg
Figure 6. Current Derating, Ambient Per Leg
www.onsemi.com
3
175
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
900
TJ = 175°C
TJ = 25°C
f = 1 MHz
800
SQUARE WAVE
700
C, CAPACITANCE (pF)
P
, AVERAGE FORWARD POWER DISSIPATION (WATTS)
F (AV)
MBR1535CTG, MBR1545CTG
dc
600
500
400
300
200
100
0
0
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30
0
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
10
20
30
40
VR, REVERSE VOLTAGE (VOLTS)
Figure 8. Typical Capacitance
Figure 7. Forward Power Dissipation
www.onsemi.com
4
50
MBR1535CTG, MBR1545CTG
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AH
−T−
B
SEATING
PLANE
C
F
T
S
4
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
A
Q
1 2 3
U
H
K
Z
L
R
V
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
J
G
D
N
INCHES
MIN
MAX
0.570
0.620
0.380
0.415
0.160
0.190
0.025
0.038
0.142
0.161
0.095
0.105
0.110
0.161
0.014
0.024
0.500
0.562
0.045
0.060
0.190
0.210
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
0.045
----0.080
STYLE 6:
PIN 1.
2.
3.
4.
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.53
4.07
4.83
0.64
0.96
3.61
4.09
2.42
2.66
2.80
4.10
0.36
0.61
12.70
14.27
1.15
1.52
4.83
5.33
2.54
3.04
2.04
2.79
1.15
1.39
5.97
6.47
0.00
1.27
1.15
----2.04
ANODE
CATHODE
ANODE
CATHODE
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MBR1535CT/D