MUR1610CTG, MUR1615CTG, MUR1620CTG, MUR1640CTG, MUR1660CTG Switch Mode Power Rectifiers www.onsemi.com These state−of−the−art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes. Features • • • • • • • • • Ultrafast 35 and 60 Nanosecond Recovery Times 175°C Operating Junction Temperature Popular TO−220 Package Epoxy Meets UL 94 V−0 @ 0.125 in High Temperature Glass Passivated Junction High Voltage Capability to 600 V Low Leakage Specified @ 150°C Case Temperature Current Derating @ Both Case and Ambient Temperatures These are Pb−Free Devices* ULTRAFAST RECTIFIERS 16 AMPERES, 100−600 VOLTS 1 2, 4 3 4 Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 1.9 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds TO−220AB CASE 221A−09 1 2 3 MARKING DIAGRAM AY WW U16xxG AKA A Y WW U16xx G KA *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2015 January, 2015 − Rev. 8 1 = = = = Assembly Location Year Work Week Device Code xx = 10, 15, 20, 40 or 60 = Pb−Free Package = Diode Polarity ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. Publication Order Number: MUR1620CT/D MUR1610CTG, MUR1615CTG, MUR1620CTG, MUR1640CTG, MUR1660CTG MAXIMUM RATINGS MUR16 Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current Total Device, (Rated VR), TC = 150°C Peak Rectified Forward Current (Rated VR, Square Wave, 20 kHz), TC = 150°C Per Leg Total Device Per Diode Leg Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Operating Junction Temperature and Storage Temperature Symbol 10CT 15CT 20CT 40CT 60CT Unit VRRM VRWM VR 100 150 200 400 600 V IF(AV) 8.0 16 A IFM 16 A IFSM 100 A TJ, Tstg *65 to +175 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS (Per Diode Leg) Parameter Symbol Maximum Thermal Resistance, Junction−to−Case Value Unit °C/W RqJC 3.0 2.0 Symbol 1620 1640 1660 0.895 0.975 1.00 1.30 1.20 1.50 ELECTRICAL CHARACTERISTICS (Per Diode Leg) Characteristic Maximum Instantaneous Forward Voltage (Note 1) (iF = 8.0 A, TC = 150°C) (iF = 8.0 A, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TC = 150°C) (Rated DC Voltage, TC = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) (IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A) trr Unit V mA 250 5.0 500 10 35 25 60 50 ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0% www.onsemi.com 2 MUR1610CTG, MUR1615CTG, MUR1620CTG, MUR1640CTG, MUR1660CTG MUR1610CT, MUR1615CT, MUR1620CT 100 IR, REVERSE CURRENT (m A) 70 50 30 TJ = 175°C 100°C 10 TJ = 175°C 100°C 0.8 0.4 0.2 0.08 0.04 0.02 7.0 25°C 0 25°C 40 20 60 5.0 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current, Per Leg* 3.0 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 2.0 IF(AV) , AVERAGE POWER DISSIPATION (WATTS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 800 400 200 80 40 20 8.0 4.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.5 0.4 0.6 0.7 0.8 1.0 0.9 1.1 1.2 10 RATED VR APPLIED 9.0 8.0 7.0 6.0 5.0 dc 4.0 3.0 2.0 SQUARE WAVE 1.0 0 140 vF, INSTANTANEOUS VOLTAGE (VOLTS) 145 150 155 160 165 170 175 180 TC, CASE TEMPERATURE (°C) Figure 1. Typical Forward Voltage, Per Leg PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 3. Current Derating, Case, Per Leg 14 RqJA = 16°C/W RqJA = 60°C/W (NO HEATSINK) 12 dc 10 8.0 SQUARE WAVE 6.0 4.0 dc 2.0 SQUARE WAVE 0 0 20 40 60 80 100 120 140 160 180 200 10 TJ = 175°C 9.0 8.0 SQUARE WAVE 7.0 dc 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient, Per Leg Figure 5. Power Dissipation, Per Leg www.onsemi.com 3 10 MUR1610CTG, MUR1615CTG, MUR1620CTG, MUR1640CTG, MUR1660CTG MUR1640CT 70 50 100°C TJ = 175°C 20 25°C 10 800 400 200 TJ = 175°C 80 40 20 8.0 4.0 2.0 150°C 100°C 0.8 0.4 0.2 0.08 0.04 0.02 7.0 25°C 0 100 50 5.0 150 200 250 300 350 450 500 400 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current, Per Leg* 3.0 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these curves if VR is sufficiently below rated VR. 2.0 IF(AV) , AVERAGE POWER DISSIPATION (WATTS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 IR, REVERSE CURRENT (m A) 100 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.6 0.8 1.0 1.4 1.2 1.6 10 RATED VR APPLIED 9.0 8.0 7.0 6.0 5.0 dc 4.0 3.0 2.0 SQUARE WAVE 1.0 0 140 vF, INSTANTANEOUS VOLTAGE (VOLTS) 145 150 155 160 165 170 180 175 TC, CASE TEMPERATURE (°C) Figure 6. Typical Forward Voltage, Per Leg PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 8. Current Derating, Case, Per Leg 14 RqJA = 16°C/W RqJA = 60°C/W (NO HEATSINK) 12 10 dc 8.0 6.0 SQUARE WAVE 4.0 dc 2.0 SQUARE WAVE 0 0 20 40 60 80 100 120 140 160 180 200 10 TJ = 175°C 9.0 SQUARE WAVE dc 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient, Per Leg Figure 10. Power Dissipation, Per Leg www.onsemi.com 4 10 MUR1610CTG, MUR1615CTG, MUR1620CTG, MUR1640CTG, MUR1660CTG MUR1660CT 100 IR, REVERSE CURRENT (m A) 70 50 30 100°C 10 25°C 7.0 TJ = 150°C 100°C 25°C 100 200 5.0 500 400 300 600 VR, REVERSE VOLTAGE (VOLTS) Figure 12. Typical Reverse Current, Per Leg* 3.0 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 2.0 IF(AV) , AVERAGE POWER DISSIPATION (WATTS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) TJ = 150°C 20 800 400 200 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.8 0.6 1.0 1.2 1.6 1.4 1.8 10 RATED VR APPLIED 9.0 8.0 7.0 6.0 5.0 dc 4.0 3.0 2.0 SQUARE WAVE 1.0 0 140 vF, INSTANTANEOUS VOLTAGE (VOLTS) 145 150 155 160 165 170 175 180 TC, CASE TEMPERATURE (°C) Figure 11. Typical Forward Voltage, Per Leg PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 13. Current Derating, Case, Per Leg 10 RqJA = 16°C/W RqJA = 60°C/W (NO HEATSINK) 9.0 dc 8.0 7.0 6.0 SQUARE WAVE 5.0 4.0 dc 3.0 2.0 SQUARE WAVE 1.0 0 0 20 40 60 80 100 120 140 160 180 200 14 13 12 11 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 SQUARE WAVE TJ = 175°C dc 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 14. Current Derating, Ambient, Per Leg Figure 15. Power Dissipation, Per Leg www.onsemi.com 5 10 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR1610CTG, MUR1615CTG, MUR1620CTG, MUR1640CTG, MUR1660CTG 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 ZqJC(t) = r(t) RqJC P(pk) 0.05 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 t1 0.01 t2 0.02 TJ(pk) - TC = P(pk) ZqJC(t) DUTY CYCLE, D = t1/t2 SINGLE PULSE 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000 t, TIME (ms) Figure 16. Thermal Response 1000 C, CAPACITANCE (pF) MUR1620CT THRU 1660CT MUR1605CT THRU 1615CT 300 TJ = 25°C 100 30 10 1.0 10 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 17. Typical Capacitance, Per Leg ORDERING INFORMATION Device Package MUR1610CTG TO−220 (Pb−Free) MUR1615CTG TO−220 (Pb−Free) MUR1620CTG TO−220 (Pb−Free) MUR1640CTG TO−220 (Pb−Free) MUR1660CTG TO−220 (Pb−Free) Shipping† 50 Units / Rail †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 6 MUR1610CTG, MUR1615CTG, MUR1620CTG, MUR1640CTG, MUR1660CTG PACKAGE DIMENSIONS TO−220 CASE 221A−09 ISSUE AH −T− B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D INCHES MIN MAX 0.570 0.620 0.380 0.415 0.160 0.190 0.025 0.038 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.024 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.53 4.07 4.83 0.64 0.96 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.61 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 N ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MUR1620CT/D