LMV931 D

LMV931, LMV932
Single and Dual Low
Voltage, Rail-to-Rail Input
and Output, Operational
Amplifiers
The LMV931 Single and LMV932 Dual are CMOS low−voltage
operational amplifiers which can operate on single−sided power
supplies (1.8 V to 5.0 V) with rail−to−rail input and output swing.
Both devices come in small state−of−the−art packages and require
very low quiescent current making them ideal for battery−operated,
portable applications such as notebook computers and hand−held
instruments. Rail−to−Rail operation provides improved signal−to−noise
performance plus the small packages allow for closer placement to
signal sources thereby reducing noise pickup.
The single LMV931 is offered in space saving SC70−5 package.
The dual LMV932 is in either a Micro8 or SOIC package. These small
packages are very beneficial for crowded PCB’s.
Features
• Performance Specified on Single−Sided Power Supply: 1.8 V, 2.7 V, and
5V
MARKING
DIAGRAMS
LMV931 (Single)
LMV931 in a SC−70
LMV932 in a Micro8 or SOIC−8
No Output Crossover Distortion
Extended Industrial Temperature Range: −40°C to +125°C
Low Quiescent Current 210 mA, Max Per Channel
No Output Phase−Reversal from Overdriven Input
These are Pb−Free Devices
AAF MG
G
SC−70
CASE 419A
5
5
ADF MG
G
1
TSOP−5
CASE 483
• Small Packages:
•
•
•
•
•
http://onsemi.com
1
M = Date Code
G
= Pb−Free Package
(*Note: Microdot may be in either location)
LMV932 (Dual)
8
V932
AYWG
G
Typical Applications
• Notebook Computers, Portable Battery−Operated Instruments, PDA’s
• Active Filters, Low−Side Current Monitoring
8
RL = 600 W
TA = 25°C
0.09
1
0.08
DV FROM RAIL (V)
1
8
0.1
SOIC−8
CASE 751
0.07
0.06
0.04
VOH
0.03
0.02
1
LMV932
ALYW
G
A
= Assembly Location
Y
= Year
L
= Wafer Lot
W
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
0.05
VOL
0.01
0 1.8
Micro8]
CASE 846A
2.2
2.6
3
3.4
3.8
4.2
4.6
5
SUPPLY VOLTAGE (mV)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 14 of this data sheet.
Figure 1. Output Voltage Swing vs. Supply Voltage
© Semiconductor Components Industries, LLC, 2012
August, 2012 − Rev. 9
1
Publication Order Number:
LMV931/D
LMV931, LMV932
PIN CONNECTIONS
SC70−5/TSOP−5
1
Micro8/SOIC−8
5
OUT A
1
IN A−
2
IN A+
3
VEE
4
VCC
+IN
2
+
−
VEE
3
4
−IN
OUTPUT
(Top View)
8 VCC
A
− +
7 OUT B
B
+ −
6 IN B−
5 IN B+
(Top View)
MAXIMUM RATINGS
Symbol
VS
Rating
Supply Voltage (Operating Range VS = 1.8 V to 5.5 V)
VIDR
Input Differential Voltage
VICR
Input Common Mode Voltage Range
Maximum Input Current
Value
Unit
5.5
V
$Supply Voltage
V
−0.5 to (VCC) + 0.5
V
10
mA
tSo
Output Short Circuit (Note 1)
Continuous
TJ
Maximum Junction Temperature (Operating Range −40°C to 85°C)
150
°C
qJA
Thermal Resistance:
280
333
238
°C/W
Tstg
Storage Temperature
−65 to 150
°C
260
°C
SC−70
TSOP−5
Micro8
Mounting Temperature (Infrared or Convection v 30 sec)
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may
affect device reliability.
ESD data available upon request.
1. Continuous short−circuit operation to ground at elevated ambient temperature can result in exceeding the maximum allowed junction
temperature of 150°C. Output currents in excess of 45 mA over long term may adversely affect reliability. Shorting output to either VCC
or VEE will adversely affect reliability.
http://onsemi.com
2
LMV931, LMV932
1.8 V DC ELECTRICAL CHARACTERISTICS (Note 2) Unless otherwise noted, all min/max limits are guaranteed for TA = 25°C,
VS = 1.8 V, VCM = VS/2, VO = VS/2 and RL > 1 MW. Typical specifications represent the most likely parametric norm.
Parameter
Input Offset Voltage
Input Offset Voltage
Average Drift
Symbol
Condition
VIO
Min
Typ
Max
Unit
LMV931 (Single) (−40°C to +125°C)
1
6
mV
LMV932 (Dual) (−40°C to +125°C)
1
7.5
TCVIO
5.5
mV/°C
Input Bias Current
IB
−40°C to +125°C
<1
nA
Input Offset Current
IIO
−40°C to +125°C
<1
nA
Supply Current
(per Channel)
ICC
In Active Mode
75
Common Mode
Rejection Ratio
CMRR
Power Supply
Rejection Ratio
Input Common−Mode
Voltage Range
Large Signal Voltage
Gain LMV931
(Single)
−40°C to +125°C
PSRR
VCM
AV
Large Signal Voltage
Gain LMV932 (Dual)
Output Swing
VOH
VOL
50
− 40°C to +125°C
50
−0.2 V v VCM v 0 V, 1.8 V v VCM v 2 V
50
70
50
70
1.8 V v
v 5 V, VCM = 0.5 V
VOL
IO
dB
−40°C to +125°C
50
For CMRR w 50 dB and TA = 25°C
VEE
− 0.2
For CMRR w 50 dB and TA = − 40°C to +85°C
VEE
VCC
For CMRR w 50 dB and TA = − 40°C to +125°C
VEE
+ 0.2
VCC
− 0.2
RL = 600 W to 0.9 V, VO = 0.2 V to 1.6 V, VCM = 0.5 V
77
−40°C to +125°C
73
RL = 2 kW to 0.9V, VO = 0.2 V to 1.6 V, VCM = 0.5 V
80
−40°C to +125°C
75
RL = 600 W to 0.9 V, VO = 0.2 V to 1.6 V, VCM = 0.5 V
75
−40°C to +125°C
72
RL = 2 kW to 0.9 V, VO = 0.2 V to 1.6 V,VCM = 0.5 V
78
−40°C to +125°C
75
RL = 600 W to 0.9V, VIN = $100 mV
1.65
−40°C to +125°C
1.63
−0.2
to 2.1
1.75
−40°C to +125°C
1.74
90
100
0.105
1.77
0.035
0.04
Sourcing, Vo = 0 V, VIN = +100 mV
4.0
−40°C to +125°C
3.3
Sinking, Vo = 1.8V, VIN = −100 mV
7.0
−40°C to +125°C
5.0
3
V
1.72
0.24
RL = 2 kW to 0.9 V, VIN = $100 mV
http://onsemi.com
dB
0.12
RL = 2 kW to 0.9V, VIN = $100 mV
2. Guaranteed by design and/or characterization.
V
105
0.077
RL = 600 W to 0.9V, VIN = $100 mV
VCC
+ 0.2
101
−40°C to +125°C
Output Short Circuit
Current
dB
70
−40°C to +125°C
VOH
mA
205
0 V v VCM v 0.6 V, 1.4 V v VCM v 1.8 V
V+
185
30
60
mA
LMV931, LMV932
1.8 V AC ELECTRICAL CHARACTERISTICS Unless otherwise specified, all limits are guaranteed for TA = 25°C, VS = 1.8 V,
VCM = VS/2, Vo = VS/2 and RL > 1 MW. Typical specifications represent the most likely parametric norm. Min/Max specifications are
guaranteed by testing, characterization, or statistical analysis.
Parameter
Slew Rate
Symbol
Condition
SR
(Note 3)
Min
Typ
Max
Unit
0.35
V/mS
GBWP
1.4
MHz
Phase Margin
Qm
67
°
Gain Margin
Gm
7
dB
Input−Referred
Voltage Noise
en
f = 50 kHz, VCM = 0.5 V
60
nV/√Hz
Total Harmonic
Distortion
THD
f = 1 kHz, AV = +1, RL = 600 W, VO = 1 VPP
0.023
%
(Note 4)
123
dB
Gain Bandwidth
Product
Amplifier−to−Amplifier
Isolation
3. Connected as voltage follower with input step from VEE to VCC. Number specified is the slower of the positive and negative slew rates.
4. Input referred, RL = 100 kW connected to VS/2. Each amp excited in turn with 1 kHz to produce VO = 3 VPP. (For Supply Voltages < 3 V,
VO = VCC).
http://onsemi.com
4
LMV931, LMV932
2.7 V DC ELECTRICAL CHARACTERISTICS (Note 5) Unless otherwise noted, all min/max limits are guaranteed for TA = 25°C,
VS = 2.7 V, VCM = VS/2, VO = VS/2 and RL > 1 MW. Typical specifications represent the most likely parametric norm.
Parameter
Input Offset Voltage
Input Offset Voltage
Average Drift
Symbol
Condition
VIO
Min
Typ
Max
Unit
LMV931 (Single) (−40°C to +125°C)
1
6
mV
LMV932 (Dual) (−40°C to +125°C)
1
7.5
TCVIO
5.5
mV/°C
Input Bias Current
IB
−40°C to +125°C
<1
nA
Input Offset Current
IIO
−40°C to +125°C
<1
nA
Supply Current (per
Channel)
ICC
In Active Mode
80
Common Mode
Rejection Ratio
Power Supply
Rejection Ratio
Input Common−Mode
Voltage Range
Large Signal Voltage
Gain LMV931
(Single)
Large Signal Voltage
Gain LMV932 (Dual)
Output Swing
−40°C to +125°C
CMRR
PSRR
VCM
AV
AV
VOH
VOL
50
−40°C to +125°C
50
−0.2 V v VCM v 0 V, 2.7 V v VCM v 2.9 V
50
70
50
70
1.8 V v
v 5 V, VCM = 0.5 V
VOL
IO
dB
−40°C to +125°C
50
For CMRR w 50 dB and TA = 25°C
VEE
− 0.2
For CMRR w 50 dB and TA = −40°C to +85°C
VEE
VCC
For CMRR w 50 dB and TA = −40°C to +125°C
VEE
+ 0.2
VCC
− 0.2
RL = 600 W to 1.35 V, VO = 0.2 V to 2.5 V
87
−40°C to +125°C
86
RL = 2 kW to 1.35 V, VO = 0.2 V to 2.5 V
92
−40°C to +125°C
91
RL = 600 W to 1.35 V, VO = 0.2 V to 2.5 V
78
−40°C to +125°C
75
RL= 2 kW to 1.35 V, VO = 0.2 V to 2.5 V
81
−40°C to +125°C
78
RL = 600 W to 1.35 V, VIN = $100 mV
2.55
−40°C to +125°C
2.53
−0.2
to 3.0
2.65
−40°C to +125°C
2.64
90
100
0.11
2.675
0.04
0.045
Sourcing, Vo = 0 V, VIN = $100 mV
20
−40°C to +125°C
15
Sinking, Vo = 0 V, VIN = −100 mV
18
−40°C to +125°C
12
5
V
2.62
0.025
RL = 2 kW to 1.35 V, VIN = $100 mV
http://onsemi.com
dB
0.13
RL = 2 kW to 1.35 V, VIN = $100 mV
5. Guaranteed by design and/or characterization.
V
110
0.083
RL = 600 W to 1.35 V, VIN = $100 mV
VCC
+ 0.2
104
−40°C to +125°C
Output Short Circuit
Current
dB
70
−40°C to +125°C
VOH
mA
210
0 V v VCM v 1.5 V, 2.3 V v VCM v 2.7 V
V+
190
65
75
mA
LMV931, LMV932
2.7 V AC ELECTRICAL CHARACTERISTICS Unless otherwise specified, all limits are guaranteed for TA = 25°C, VS = 2.7 V,
VCM = VS/2 ,Vo = VS/2 and RL > 1 MW. Typical specifications represent the most likely parametric norm. Min/Max specifications are
guaranteed by testing, characterization, or statistical analysis.
Parameter
Slew Rate
Symbol
Condition
SR
(Note 6)
Min
Typ
Max
Unit
0.4
V/uS
GBWP
1.4
MHz
Phase Margin
Qm
70
°
Gain Margin
Gm
7.5
dB
Input−Referred
Voltage Noise
en
f = 50 kHz, VCM = 1.0 V
57
nV/√Hz
Total Harmonic
Distortion
THD
f = 1 kHz, AV = +1, RL = 600 W, VO = 1 VPP
0.022
%
(Note 7)
123
dB
Gain Bandwidth
Product
Amplifier−to−Amplifier
Isolation
6. Connected as voltage follower with input step from VEE to VCC. Number specified is the slower of the positive and negative slew rates.
7. Input referred, RL = 100 kW connected to VS/2. Each amp excited in turn with 1 kHz to produce VO = 3 VPP. (For Supply Voltages < 3 V,
VO = VCC).
http://onsemi.com
6
LMV931, LMV932
5 V DC ELECTRICAL CHARACTERISTICS (Note 8) Unless otherwise noted, all min/max limits are guaranteed for TA = 25°C,
VS = 5 V, VCM = VS/2, VO = VS/2 and RL > 1 MW. Typical specifications represent the most likely parametric norm.
Parameter
Input Offset Voltage
Input Offset Voltage
Average Drift
Symbol
Condition
VIO
Min
Typ
Max
Unit
LMV931 (Single) (−40°C to +125°C)
1
6
mV
LMV932 (Dual) (−40°C to +125°C)
1
7.5
TCVIO
5.5
mV/°C
Input Bias Current
IB
−40°C to +125°C
<1
nA
Input Offset Current
IIO
−40°C to +125°C
<1
nA
Supply Current (per
Channel)
ICC
In Active Mode
95
Common−Mode
Rejection Ratio
Power Supply
Rejection Ratio
Input Common−Mode
Voltage Range
Large Signal Voltage
Gain LMV931
(Single)
Large Signal Voltage
Gain LMV932 (Dual)
Output Swing
−40°C to +125°C
CMRR
PSRR
VCM
AV
AV
VOH
VOL
50
−40°C to +125°C
50
−0.2 V v VCM v 0 V, 5.0 V v VCM v 5. 2V
50
70
50
70
1.8 V v
v 5 V, VCM = 0.5 V
VOL
IO
dB
−40°C to +125°C
50
For CMRR w 50 dB and TA = 25°C
VEE
− 0.2
For CMRR w 50 dB and TA = −40°C to +85°C
VEE
VCC
For CMRR w 50 dB and TA = −40°C to +125°C
VEE
+ 0.3
VCC
− 0.3
RL = 600 W to 2.5 V, VO = 0.2 V to 4.8 V
88
−40°C to +125°C
87
RL = 2 kW to 2.5 V, VO = 0.2 V to 4.8 V
94
−40°C to +125°C
93
RL = 600 W to 2.5 V, VO = 0.2 V to 4.8 V
81
−40°C to +125°C
78
RL = 2 kW to 2.5 V, VO = 0.2 V to 4.8 V
85
−40°C to +125°C
82
RL = 600 W to 2.5 V, VIN = $100 mV
4.855
−40°C to +125°C
4.835
−0.2
to 5.3
4.945
−40°C to +125°C
4.935
90
100
0.16
4.967
0.065
0.075
Sourcing, Vo = 0 V, VIN = +100 mV
55
−40°C to +125°C
45
Sinking, Vo = 5 V, VIN = −100 mV
58
−40°C to +125°C
45
7
V
4.89
0.037
RL = 2 kW to 2.5 V, VIN = $100 mV
http://onsemi.com
dB
0.18
RL = 2 kW to 2.5 V, VIN = $100 mV
8. Guaranteed by design and/or characterization.
V
113
0.12
RL = 600 W to 2.5 V, VIN = $100 mV
VCC
+ 0.2
102
−40°C to +125°C
Output Short−Circuit
Current
dB
70
−40°C to +125°C
VOH
mA
230
0 V v VCM v 3.8 V, 4.6 V v VCM v 5.0 V
V+
210
65
80
mA
LMV931, LMV932
5 V AC ELECTRICAL CHARACTERISTICS Unless otherwise specified, all limits are guaranteed for TA = 25°C, VS = 5 V,
VCM = VS/2, Vo = VS/2 and RL > 1 MW. Typical specifications represent the most likely parametric norm.
Parameter
Slew Rate
Symbol
Condition
SR
(Note 9)
Min
Typ
Max
Unit
0.48
V/uS
GBWP
1.5
MHz
Phase Margin
Qm
65
°
Gain Margin
Gm
8
dB
Input−Referred
Voltage Noise
en
f = 50 kHz, VCM = 2 V
50
nV/√Hz
Total Harmonic
Distortion
THD
f = 1 kHz, AV = +1, RL = 600 W, VO = 1 VPP
0.022
%
(Note 10)
123
dB
Gain Bandwidth
Product
Amplifier−to−
Amplifier Isolation
9. Connected as voltage follower with input step from VEE to VCC. Number specified is the slower of the positive and negative slew rates.
10. Input referred, RL = 100 kW connected to VS/2. Each amp excited in turn with 1 kHz to produce VO = 3 VPP. (For Supply Voltages < 3 V,
VO = VCC).
http://onsemi.com
8
LMV931, LMV932
TYPICAL CHARACTERISTICS
(TA = 25°C and VS = 5 V unless otherwise specified)
0.12
0.12
25°C
0.10
0.08
125°C
SUPPLY CURRENT (mA)
SUPPLY CURRENT (mA)
LMV931 (Single)
−40°C
0.06
0.04
0.02
0
1.8
2.2
2.6
3
3.4
3.8
4.2
4.6
85°C
0.08
25°C
0.06
−40°C
0.04
0.02
0
5
125°C
0.10
LMV932 (Dual)
1.8
2.2
2.6
Figure 3. Supply Current vs. Supply Voltage
5.0
100
VS = 2.7 V
10
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
4.6
4.2
Figure 2. Supply Current vs. Supply Voltage
VS = 5.0 V
VS = 2.7 V
1
VS = 1.8 V
0.1
0.01
0.001
0.01
0.1
1.0
VS = 5.0 V
10
VS = 1.8 V
1
0.1
0.01
0.001
10
0.01
0.1
1.0
10
OUTPUT VOLTAGE REFERENCED TO VCC (mV)
OUTPUT VOLTAGE REFERENCED TO VEE (mV)
Figure 4. Sourcing Current vs. Output Voltage
(TA = 255C)
Figure 5. Sinking Current vs. Output Voltage
(TA = 255C)
0.10
0.020
RL = 600 W
TA = 25°C
0.09
0.016
0.07
0.06
0.05
0.04
VOH
0.03
RL = 2.0 W
TA = 25°C
0.018
DV FROM RAIL (V)
0.08
DV FROM RAIL (V)
3.8
3.4
SUPPLY VOLTAGE (V)
100
0.02
0.014
0.012
VOL
0.010
0.008
VOH
0.006
0.004
0.01
0
3.0
SUPPLY VOLTAGE (V)
VOL
1.8
2.2
2.6
0.002
3
3.4
3.8
4.2
4.6
0
5
1.8
SUPPLY VOLTAGE (mV)
2.2
2.6
3.0
3.4
3.8
4.2
SUPPLY VOLTAGE (mV)
4.6
Figure 7. Output Voltage vs. Supply Voltage
Figure 6. Output Voltage Swing vs. Supply
Voltage
http://onsemi.com
9
5.0
LMV931, LMV932
TYPICAL CHARACTERISTICS
(TA = 25°C and VS = 5 V unless otherwise specified)
60
GAIN
180
Gain (5 V)
GAIN
90
PHASE
0
45
GAIN (dB)
20
20
90
PHASE
45
0
VS = 1.8 V
RL = 600 W
RL = 1 MW
10 K
100 K
1M
10 M
100 K
1M
Figure 8. Open Loop Gain and Phase
Figure 9. Frequency Response vs. CL
180
60
40
PHASE
45
0
1M
135
20
0
VS = 5 V
RL = 600 W
100 K
180
−40 Phase
25 Phase
85 Phase
125 Phase
GAIN (dB)
90
PHASE MARGIN (°)
135
20
−40 Gain
25 Gain
85 Gain
125 Gain
−20
0
90
VS = 1.8 V
RL = 600 W
CL = 150 pF
45
10 K
100 K
1M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 10. Frequency Response vs. CL
Figure 11. Gain and Phase vs. Temp
180
60
GAIN (dB)
−40 Phase
25 Phase
85 Phase
125 Phase
135
20
0
−20
90
VS = 5 V
RL = 600 W
CL = 150 pF
10 K
45
100 K
FREQUENCY (Hz)
Figure 12. Gain and Phase vs. Temp
http://onsemi.com
10
1M
0
PHASE MARGIN (°)
−40 Gain
25 Gain
85 Gain
125 Gain
40
0
0
PHASE MARGIN (°)
Gain 0 pF
Gain 300 pF
PM 0 pF
PM 300 pF
40
10 K
10 K
FREQUENCY (Hz)
GAIN
GAIN (dB)
−20
0
FREQUENCY (Hz)
60
−20
135
PHASE MARGIN (°)
Phase (5 V)
−20
Gain 0 pF
Gain 300 pF
PM 0 pF
PM 300 pF
40
135
Phase (1.8 V)
PHASE MARGIN (°)
40
GAIN (dB)
60
180
Gain (1.8 V)
LMV931, LMV932
TYPICAL CHARACTERISTICS
(TA = 25°C and VS = 5 V unless otherwise specified)
80
70
80
VS = 5 V
60
VS = 2.7 V
60
VS = 1.8 V
40
50
PSRR (dB)
CMRR (dB)
100
40
30
20
20
10
0
10
100
1K
0
10
10 K
VS = 5 V
100
FREQUENCY (Hz)
Figure 13. CMRR vs. Frequency
10 K
Figure 14. PSRR vs. Frequency
10.E−6
10
VS = 5 V
AV = 1000 RTI
VS = 5 V
RL = 600 W
AV = +1
Input = 1 Vp−p
1
VS = 2.7 V
VS = 1.8 V
1.E−6
THD (%)
INPUT VOLTAGE NOISE (nV/√HZ)
1K
FREQUENCY (Hz)
0.1
100.E−9
0.01
10.E−9
10
100
1K
10 K
100 K
0.001
10
100
FREQUENCY (Hz)
1K
FREQUENCY (Hz)
Figure 15. Input Voltage Noise vs. Frequency
Figure 16. THD vs. Frequency
0.6
Falling Edge
SLEW RATE (V/ms)
0.5
0.4
Rising Edge
0.3
0.2
0.1
0
1.8
2.2
2.6
3
3.4
3.8
4.2
4.6
SUPPLY VOLTAGE (V)
Figure 17. Slew Rate vs. Supply Voltage
http://onsemi.com
11
5
10 K
LMV931, LMV932
TYPICAL CHARACTERISTICS
(TA = 25°C and VS = 5 V unless otherwise specified)
INPUT (50 mV / div)
INPUT (50 mV / div)
OUTPUT
TIME (0.25 ms / DIV)
INPUT (900 mV / div)
INPUT (50 mV / div)
OUTPUT
INPUT
OUTPUT
VS = 1.8 V
RL = 2 kW
AV = +1
OUTPUT (900 mV / div)
OUTPUT (50 mV / div)
INPUT
Figure 19. Small Signal Transient Response
TIME (0.25 ms / DIV)
TIME (0.25 ms / DIV)
Figure 20. Small Signal Transient Response
Figure 21. Large Signal Transient Response
VS = 2.7 V
RL = 2 kW
AV = +1
INPUT (2.5 V / div)
OUTPUT
VS = 5 V
RL = 2 kW
AV = +1
TIME (0.25 ms / DIV)
TIME (0.25 ms / DIV)
Figure 22. Large Signal Transient Response
Figure 23. Large Signal Transient Response
http://onsemi.com
12
OUTPUT (2.5 V / div)
OUTPUT (1.35 V / div)
INPUT
INPUT (1.35 V / div)
OUTPUT
TIME (0.25 ms / DIV)
Figure 18. Small Signal Transient Response
VS = 5 V
RL = 2 kW
AV = +1
INPUT
OUTPUT (50 mV / div)
INPUT
VS = 2.7 V
RL = 2 kW
AV = +1
OUTPUT (50 mV / div)
VS = 1.8 V
RL = 2 kW
AV = +1
LMV931, LMV932
TYPICAL CHARACTERISTICS
(TA = 25°C and VS = 5 V unless otherwise specified)
110
VS = 2.7 V
SHORT−CIRCUIT CURRENT (mA)
SHORT−CIRCUIT CURRENT (mA)
110
100
90
80
VS = 5 V
70
60
VS = 1.8 V
50
40
30
20
10
0
−40
−20
0
20
40
60
80
100
100
90
VS = 5 V
80
70
VS = 2.7 V
60
50
40
30
20
VS = 1.8 V
10
0
−40
120
−20
0
20
TEMPERATURE (°C)
80
7
VS = 1.8 V
5
VOS (mV)
0°C
3
25°C
2
−40°C
125°C
1
−40°C
4
85°C
120
VS = 2.7 V
125°C
6
5
4
100
Figure 25. Short−Circuit vs. Temperature
(Sourcing)
6
3
0°C
2
1
25°C
0
−1
0
85°C
−2
−0.5
0
0.5
1
1.5
2
−3
−0.5
2.5
0
0.5
1
VCM (V)
2
2.5
3
Figure 27. Offset Voltage vs. Common Mode
Range
8
125°C
25°C
6
VS = 5.0 V
4
−40°C
2
85°C
0°C
0
−2
−4
−6
1.5
VCM (V)
Figure 26. Offset Voltage vs. Common Mode
Range VDD
VOS (mV)
VOS (mV)
60
TEMPERATURE (°C)
Figure 24. Short−Circuit vs. Temperature
(Sinking)
−1
40
−1
0
1
2
3
4
5
VCM (V)
Figure 28. Offset Voltage vs. Common Mode
Range
http://onsemi.com
13
6
3.5
LMV931, LMV932
APPLICATION INFORMATION
50 k
R1
5.0 k
VCC
VCC
R2
10 k
MC1403
2.5 V
VO
LMV931
VO
LMV931
VCC
−
Vref
−
+
+
1
V ref + V CC
2
R1
V O + 2.5 V(1 )
)
R2
R
R
Figure 29. Voltage Reference
fO +
C
C
1
2pRC
For: fo = 1.0 kHz
R = 16 kW
C = 0.01 mF
Figure 30. Wien Bridge Oscillator
VCC
C
R1
Vin
R2
C
R3
−
Hysteresis
R1
LMV931
VO
−
VOL
VO
CO = 10 C
Vref
VO
+
Vin
+
R2
VOH
Vref
CO
LMV931
VinL
Given: fo = center frequency
A(fo) = gain at center frequency
VinH
Choose value fo, C
Q
Then : R3 +
pf O C
Vref
R1
(V OL * V ref) ) V ref
R1 ) R2
R1
V inH +
(V OH * V ref) ) V ref
R1 ) R2
R1
H+
(V OH * V OL)
R1 ) R2
V inL +
R1 +
R2 +
Figure 31. Comparator with Hysteresis
R3
2 A(f O)
R1 R3
4Q 2 R1 * R3
For less than 10% error from operational amplifier,
((QO fO)/BW) < 0.1 where fo and BW are expressed in Hz.
If source impedance varies, filter may be preceded with
voltage follower buffer to stabilize filter parameters.
Figure 32. Multiple Feedback Bandpass Filter
ORDERING INFORMATION
Number of
Channels
Number of Pins
Package Type
Shipping†
LMV931SQ3T2G
Single
5
SC70−5
(Pb−Free)
3000 / Tape & Reel
LMV931SN3T1G
Single
5
TSOP−5
(Pb−Free)
3000 / Tape & Reel
LMV932DMR2G*
Dual
8
Micro8
(Pb−Free)
4000 / Tape & Reel
LMV932DR2G
Dual
8
SOIC−8
(Pb−Free)
2500 / Tape & Reel
Order Number
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*Consult Sales.
http://onsemi.com
14
LMV931, LMV932
PACKAGE DIMENSIONS
SC−88A, SOT−353, SC−70
CASE 419A−02
ISSUE J
A
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 419A−01 OBSOLETE. NEW STANDARD
419A−02.
4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
G
5
4
−B−
S
1
2
DIM
A
B
C
D
G
H
J
K
N
S
3
D 5 PL
0.2 (0.008)
M
B
M
N
J
C
H
K
http://onsemi.com
15
INCHES
MIN
MAX
0.071
0.087
0.045
0.053
0.031
0.043
0.004
0.012
0.026 BSC
--0.004
0.004
0.010
0.004
0.012
0.008 REF
0.079
0.087
MILLIMETERS
MIN
MAX
1.80
2.20
1.15
1.35
0.80
1.10
0.10
0.30
0.65 BSC
--0.10
0.10
0.25
0.10
0.30
0.20 REF
2.00
2.20
LMV931, LMV932
PACKAGE DIMENSIONS
TSOP−5
CASE 483−02
ISSUE H
D 5X
NOTE 5
2X
0.10 T
2X
0.20 T
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES
LEAD FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS
OF BASE MATERIAL.
4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
5. OPTIONAL CONSTRUCTION: AN
ADDITIONAL TRIMMED LEAD IS ALLOWED
IN THIS LOCATION. TRIMMED LEAD NOT TO
EXTEND MORE THAN 0.2 FROM BODY.
0.20 C A B
M
5
1
4
2
L
3
B
S
K
DETAIL Z
G
A
DIM
A
B
C
D
G
H
J
K
L
M
S
DETAIL Z
J
C
0.05
SEATING
PLANE
H
T
SOLDERING FOOTPRINT*
0.95
0.037
MILLIMETERS
MIN
MAX
3.00 BSC
1.50 BSC
0.90
1.10
0.25
0.50
0.95 BSC
0.01
0.10
0.10
0.26
0.20
0.60
1.25
1.55
0_
10 _
2.50
3.00
1.9
0.074
2.4
0.094
1.0
0.039
0.7
0.028
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
16
LMV931, LMV932
PACKAGE DIMENSIONS
Micro8t
CASE 846A−02
ISSUE H
D
HE
PIN 1 ID
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE
BURRS. MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED
0.15 (0.006) PER SIDE.
4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION.
INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE.
5. 846A-01 OBSOLETE, NEW STANDARD 846A-02.
E
e
b 8 PL
0.08 (0.003)
M
T B
S
A
S
SEATING
−T− PLANE
0.038 (0.0015)
A
A1
MILLIMETERS
NOM
MAX
−−
1.10
0.08
0.15
0.33
0.40
0.18
0.23
3.00
3.10
3.00
3.10
0.65 BSC
0.40
0.55
0.70
4.75
4.90
5.05
DIM
A
A1
b
c
D
E
e
L
HE
MIN
−−
0.05
0.25
0.13
2.90
2.90
L
c
SOLDERING FOOTPRINT*
8X
1.04
0.041
0.38
0.015
3.20
0.126
6X
8X
4.24
0.167
0.65
0.0256
5.28
0.208
SCALE 8:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
17
INCHES
NOM
−−
0.003
0.013
0.007
0.118
0.118
0.026 BSC
0.016
0.021
0.187
0.193
MIN
−−
0.002
0.010
0.005
0.114
0.114
MAX
0.043
0.006
0.016
0.009
0.122
0.122
0.028
0.199
LMV931, LMV932
PACKAGE DIMENSIONS
SOIC−8 NB
CASE 751−07
ISSUE AK
−X−
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 751−01 THRU 751−06 ARE OBSOLETE. NEW
STANDARD IS 751−07.
A
8
5
S
B
0.25 (0.010)
M
Y
M
1
4
−Y−
K
G
C
N
DIM
A
B
C
D
G
H
J
K
M
N
S
X 45 _
SEATING
PLANE
−Z−
0.10 (0.004)
H
D
0.25 (0.010)
M
Z Y
S
X
M
J
S
MILLIMETERS
MIN
MAX
4.80
5.00
3.80
4.00
1.35
1.75
0.33
0.51
1.27 BSC
0.10
0.25
0.19
0.25
0.40
1.27
0_
8_
0.25
0.50
5.80
6.20
INCHES
MIN
MAX
0.189
0.197
0.150
0.157
0.053
0.069
0.013
0.020
0.050 BSC
0.004
0.010
0.007
0.010
0.016
0.050
0 _
8 _
0.010
0.020
0.228
0.244
SOLDERING FOOTPRINT*
1.52
0.060
7.0
0.275
4.0
0.155
0.6
0.024
1.270
0.050
SCALE 6:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
Micro8 is a trademark of International Rectifier.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
18
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
LMV931/D