NB3L03 2.8 V, High Precision 1:3 Clock Fanout Buffer Description The NB3L03 is a low−skew, low jitter 1:3 clock fanout buffer, ideal for use in portable end−equipment, such as mobile phones or tablet applications. The MCLK_IN pin has an integrated AC coupling capacitor and will directly accept a square or sine wave clock input, such as a temperature compensated crystal oscillator (TCXO). The minimum acceptable input amplitude of the sine wave is 800 mV peak−to−peak. The NB3L03 is offered in a 0.4 mm pitch 6−ball, wafer−level chip−scale package (WLCSP) (0.77 mm x 1.17 mm). Features • • • • • • http://onsemi.com WLCSP6 FC SUFFIX CASE 567HJ MARKING DIAGRAM 800 mV Single Ended Outputs Low Additive Phase Jitter Ultra Small Package: 0.4 mm Pitch WLCSP6 (0.77 mm x 1.17 mm) Exceeds JEDEC ESD Standards: 4000 V HBM, 200 V MM Industrial Temperature Range: −40°C to +85°C These are Pb−Free Devices L3MG L3 M G = Specific Device Code = Date Code = Pb−Free Package PINOUT DIAGRAM PIN DESCRIPTIONS Ball No. Name I/O Description A1 VDD I Power Supply Voltage A2 CLK_OUT1 O Clock Output 1 B1 MCLK_IN I Master Clock Input B2 CLK_OUT3 O Clock Output 3 C1 GND − Ground C2 CLK_OUT2 O Clock Output 2 Figure 1. Simplified Block Diagram ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. © Semiconductor Components Industries, LLC, 2014 February, 2014 − Rev. 1 1 Publication Order Number: NB3L03/D NB3L03 Table 1. MAXIMUM RATINGS Symbol Parameter Voltage Range (Note 1) Condition Min Max Unit MCLK_IN,CLK_OUT1, CLK_OUT2, CLK_OUT3 -0.3 VDD + 0.3 V IO Continuous Output Current ±20 mA TJ Operating Junction Temperature Range CLK_OUT1/2/3 −40 150 °C Tstg Storage Temperature Range −55 150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. All voltage values are with respect to network ground terminal. Table 2. ATTRIBUTES Characteristic Value ESD Protection Human Body Model Moisture Sensitivity >4 kV Machine Model >200 V WLCSP6 Level 1 Maximum Soldering Temperature for Lead−free Devices Using a Lead−free Solder Paste 260 Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in Transistor Count 149 Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test II Table 3. ELECTRICAL CHARACTERISTICS (TA = −40°C to +85°C) Symbol Min Typ Max Unit VDD Supply Voltage 2.3 2.8 3.465 V VIN Input Voltage p-p 800 VDD mV Output Voltage p-p 0.8 1.0 1.2 V 5.0 6.5 mA VOUT IDDdynamic Characteristic Dynamic Current at 26 MHz (Notes 2 and 3) FIN MCLK_IN Frequency Range with 800 mV input p−p 10 26 52 MHz tPD MCLK_IN to CLK_OUT_n Propagation Delay, input = 1 Vp−p @ 26 MHz 2.0 4.0 6.5 ns DC CLK_OUT_n Duty Cycle 45 50 55 % tjit Additive Phase Jitter @ 12 kHz to 20 MHz, FIN = 26 MHz @ 800 mV input p−p, input tr/tf < 1 ns tr/tf Output Rise Time 20%-80% with 10 pF Load, VIN = 800 mVp−p, 26 MHz, input slew rate < 1 ns/V tsk Channel to Channel Skew Voh High Level Output (Voh−Vol not to exceed VOUT) Vol Low Level Output (Voh−Vol not to exceed VOUT) 171 0.5 0.8 0.8 1.4 ns 10 30 ps 1.0 1.2 V 0 2. IDD dynamic specified with no load on outputs. 3. Input amplitude 1.2 V p−p. http://onsemi.com 2 fs V NB3L03 Figure 2. Typical Phase Jitter @ 26 MHz, INT Range (12 kHz to 20 MHz) ORDERING INFORMATION Device NB3L03FCT2G Package Shipping† WLCSP6 (Pb−Free) 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 3 NB3L03 PACKAGE DIMENSIONS A B D È PIN A1 REFERENCE 2X 0.10 C 2X 0.10 C WLCSP6, 1.17x0.77 CASE 567HJ ISSUE O E NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. COPLANARITY APPLIES TO SPHERICAL CROWNS OF SOLDER BALLS. DIM A A1 b D E e TOP VIEW 0.10 C MILLIMETERS MIN MAX 0.50 −−− 0.13 0.17 0.21 0.25 0.77 BSC 1.17 BSC 0.40 BSC A 6X 0.05 C A1 SIDE VIEW NOTE 3 b 0.05 C A B PACKAGE OUTLINE 0.40 PITCH e/2 6X 0.03 C C RECOMMENDED SOLDERING FOOTPRINT* SEATING PLANE e C B A1 e A 1 0.40 PITCH 2 BOTTOM VIEW 6X 0.23 DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NB3L03/D