SENSITRON SEMICONDUCTOR SHD119244 SHD119244P TECHNICAL DATA DATA SHEET 4004, REV. A HERMETIC POWER SCHOTTKY RECTIFIER (SINGLE / DUAL) DESCRIPTION: A 100 VOLT, 30 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC LCC-3P PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 100 Volts O IO 15 Amps O IO 30 Amps IFSM 280 Amps CT 600 pF 2.65 C/W Top/Tstg -65 to + 175 C Vf 0.93 Volts PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT With Cathode Maintained (@ TC=100 C) (Single) MAXIMUM DC OUTPUT CURRENT With Cathode Maintained (@ TC=100 C) (Common Cathode) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) MAXIMUM THERMAL RESISTANCE (Single) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE R JC ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps) TJ = 25 C 0.77 TJ = 125 C MAXIMUM REVERSE CURRENT (Ir @ 100 V PIV) TJ = 25 C TJ = 125 C Ir 0.35 8 ©2003 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] mA SENSITRON SEMICONDUCTOR SHD119244 SHD119244P TECHNICAL DATA DATA SHEET 4004, REV. A MECHANICAL DIMENSIONS: IN Inches / mm SINGLE COMMON CATHODE .145 (3.68) 1 .037 (.94) .030 (.76) Min. .375 (9.53) 1 2 3 2 1 3 .050 (1.27) 2 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) 3 .415 (10.54) .157 (3.99) LCC-3P .625 (15.88) PINOUT TABLE DEVICE TYPE SINGLE RECTIFIER COMMON CATHODE PIN 1 CATHODE COMMON CATHODE Typical Forward Characteristics Typical Junction Capacitance 10 101 6 5 4 3 2 100 6 5 4 3 TJ = 125 °C 2 10-1 6 5 4 3 TJ = 25 °C 150 °C 10-1 125 °C 100 °C 10-2 10-3 0.4 0.5 0.6 0.7 0.8 Forward Voltage Drop - VFM (V) 0.9 600 TJ = 25 °C 500 400 300 0 20 40 60 80 Reverse Voltage - V 2 0.3 700 200 75 °C 100 R TJ = 25 °C 50 °C 10-2 0.2 (pF) 175 °C 100 T TJ = 175 °C I (mA) Instantaneous Reverse Current - R 2 800 Junction Capacitance - C 10 6 5 4 3 PIN 3 ANODE ANODE 2 Typical Reverse Characteristics 1 2 Instantaneous Forward Current -FI (A) PIN 2 ANODE ANODE 1 10-4 0 20 40 60 80 100 120 Reverse Voltage - VR (V) ©2003 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] (V) 120 140 SENSITRON SEMICONDUCTOR SHD119244 SHD119244P TECHNICAL DATA DATA SHEET 4004, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2003 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]