4088

15LJQ100
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4088, REV. B
HERMETIC POWER SCHOTTKY RECTIFIER
Ultra Low Reverse Leakage
DESCRIPTION: A 100 VOLT, 15 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC LCC-5 PACKAGE.
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
MAXIMUM RATINGS
RATING
SYMBOL
MAX.
UNITS
PIV
100
Volts
IO
15
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(t = 8.3ms, Sine)
IFSM
200
Amps
MAXIMUM JUNCTION CAPACITANCE
CT
600
pF
RJC
2.65
C/W
---
1
g
MAXIMUM OPERATING TEMPERATURE RANGE
Top
-65 to
+ 150
C
MAXIMUM STORAGE TEMPERATURE RANGE
Tstg
-65 to
+ 150
C
SYMBOL
MAX.
UNITS
Vf
0.90
Volts
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT
(@ TC=100 C)
(Vr = 5V, TJ, = 25C,
fSIG = 1MHz, VSIG = 50mV P-P))
MAXIMUM THERMAL RESISTANCE
(Junction to Case)
Weight (typical)
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps)
TJ = 25 C
TJ = 125 C
0.72
MAXIMUM REVERSE CURRENT (Ir @ 100 V PIV)
TJ = 25 C
TJ = 125 C
Ir
0.05
mA
10
PINOUT TABLE
DEVICE TYPE
SINGLE RECTIFIER
PIN 1
CATHODE
PIN 2
ANODE
PIN 3
ANODE
© 2015 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798 www.sensitron.com  [email protected]
15LJQ100
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4088, REV. B
MECHANICAL DIMENSIONS: IN Inches / mm
SINGLE
1
2
LCC-5
.
© 2015 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798 www.sensitron.com  [email protected]
3
15LJQ100
SENSITRON
TECHNICAL DATA
DATA SHEET 4088, REV. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of
users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
© 2015 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798 www.sensitron.com  [email protected]