SHD120012 SHD120012P SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4071, REV. C HERMETIC POWER SCHOTTKY RECTIFIER Very Low Voltage Drop DESCRIPTION: 45 VOLT, 6 AMP POWER SCHOTTKY RECTIFIER IN LCC-5 PACKAGE MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. RATING / CONDITION SYMBOL MAX. UNITS PIV 45 Volts IO 3 Amps MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (PER LEG) (t=8.3ms, Sine) IFSM 60 Amps MAXIMUM JUNCTION CAPACITANCE (PER LEG) CT 160 pF RJC 11.3 C/W Top/Tstg -65 to + 175 C Vf 0.57 Volts PEAK INVERSE VOLTAGE (PER LEG) MAXIMUM AVERAGE OUTPUT CURRENT (With Cathode Maintained @ O TC=100 C) RECTANGULAR WAVEFORM (Vr =10V) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) (per leg) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 3.0 Amps) PER LEG TJ = 25 C TJ = 125 C 0.52 MAXIMUM REVERSE CURRENT (Ir @ 45V PIV) TJ = 25 C TJ = 125 C Ir 0.3 14 2002 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] mA SHD120012 SHD120012P SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4071, REV. C Mechanical Dimensions: in Inches / mm .301 [7.65] .291 [7.39] .122 [3.10] .112 [2.84] .100 [2.54] (2 PLCS) .090 [2.29] .030 [.076] MIN .125 [3.17] (2 PLCS) .115 [2.92] 3 2 .000 [0.00] .010 [0.25] .030 [0.76] MIN .395 [10.03] .406 [10.31] 1 .000 [0.00] .025 [0.64] R (16 PLCS) .010 [0.25] .020 [0.51] .150 [3.81] REF .291 [7.39] .281 [7.14] .230 [5.84] .220 [5.59] .000 [0.00] .010 [0.25] .000 [0.00] (2 PLCS) .010 [0.25] LCC-5 PINOUT TABLE DEVICE TYPE DUAL RECTIFIER SINGLE PIN 1 COMMON CATHODE CATHODE PIN 2 ANODE 1 ANODE PIN 3 ANODE 2 ANODE 2002 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD120012 SHD120012P SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4071, REV. C Typical Rev erse Characteristics (mA) Typical Forw ard Characteristics 10 1 150 °C Instantaneous Reverse Current - I R 10 1 10 0 125 °C 125 °C 10 0 100 °C 10 -1 75 °C 50 °C 10 -2 25 °C 10 -3 0 25 °C 10 20 30 40 Reverse Voltage - V R (V) 50 Typical Junction Capacitance (pF) 10 -1 Junction Capacitance - C T Instantaneous Forward Current - I F (A) 150 °C 10 -2 0.0 0.2 0.4 0.6 Forward Voltage Drop - V F (V) 0.8 140 130 120 110 100 90 80 70 60 50 40 0 10 20 30 40 Reverse Voltage - V R (V) 50 2002 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SENSITRON SEMICONDUCTOR SHD120012 SHD120012P TECHNICAL DATA DATA SHEET 4071, REV. C DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. 2002 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]