973

SHD125245
SHD125245P
SHD125245N
SHD125245D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 973, REV. B
HERMETIC POWER SCHOTTKY RECTIFIER
DESCRIPTION: A 150 VOLT, 15 AMP, SINGLE / DOUBLER; 30 AMP COMMON CATHODE / COMMON
ANODE, POWER SCHOTTKY RECTIFIER IN A TO-254 PACKAGE.
ADD THE LETTER “C” AFTER THE PREFIX SHD TO ORDER THE DEVICE WITH CERAMIC SEALS.
MAXIMUM RATINGS
ALL RATINGS ARE AT TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
PEAK INVERSE VOLTAGE (PER LEG)
SYMBOL
MAX.
UNITS
PIV
150
Volts
MAXIMUM DC OUTPUT CURRENT (PER LEG)
SINGLE / DOUBLER
(TC = 100 C)
IO
15
Amps
MAXIMUM DC OUTPUT CURRENT (PER LEG)
COMMON CATHODE / COMMON ANODE
(TC = 100 C)
IO
30
Amps
MAXIMUM NONREPETITIVE FORWORD SURGE CURRENT (t = 8.3ms,
Sine) (PER LEG)
IFSM
150
Amps
JUNCTION CAPACITANCE VR = 5Vdc, f = 1MHz
CT
500
pF
2.82
C/W
VSIG = 50mV (p-p) (Max)
MAXIMUM THERMAL RESISTANCE (PER LEG)
R
MAXIMUM OPERATING TEMPERATURE RANGE
Top
-65 to
+175
C
MAXIMUM STORAGE TEMPERATURE RANGE
Tstg
-65 to
+175
C
SYMBOL
MAX.
UNITS
Vf
1.01
Volts
0.85
Volts
0.7
8.0
mA
mA
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP (per leg, IF = 15A)
TJ = 25 C
TJ = 125 C
MAXIMUM REVERSE CURRENT Ir @ PIV (per leg, Ir @ 150V PIV))
TJ = 25 C
Ir
TJ = 125 C
©2001 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD125245
SHD125245P
SHD125245N
SHD125245D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 973, REV. B
MECHANICAL DIMENSIONS: In Inches / mm
.149 (3.78
Dia.
.139 3.53)
.545 (13.84
.535 13.60)
.800 (20.32
.790 20.07)
.685 (17.40
.665 16.89)
1.235 (31.37
1.195 30.35)
1
.045 (1.14
.035 0.89)
3 Places
2
.260
.249
.050
.040
(6.60
6.32)
(1.27
1.02)
1
.545 (13.84
.535 13.58)
2
3
SINGLE
1
2
3
COMMON CATHODE
3
.150(3.81) BSC
2 Places
.150(3.81) BSC
1
2
3
COMMON ANODE
1
2
3
DOUBLER
TO-254
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER, COMMON CATHODE (P)
DUAL RECTIFIER, COMMON ANODE (N)
DOUBLER (D)
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
ANODE/CATHODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the
latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic
equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature
assured safety or by means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the
datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting
from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application
will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any
third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related
laws and regulations.
©2001 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]