SHD126234 SHD126234P SHD126234N SHD126234D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 653, REV. F HERMETIC POWER SCHOTTKY RECTIFIER Ultra Low Reverse Leakage 200qC Operating Temperature Applications: x Switching Power Supply x Converters x Free-Wheeling Diodes x Polarity Protection Diode Features: x x x x x x x x x x Ultra low Reverse Leakage Current Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Out Performs 100 Volt Ultrafast Rectifiers Add Prefix C to SHD – For Ceramic Seals (SHDC) Add Suffix SS For JANS Screening Maximum Ratings: Characteristics Peak Inverse Voltage Max. Average Forward Current Max. Average Forward Current Max. Peak One Cycle NonRepetitive Surge Current Max. Thermal Resistance Max. Junction Temperature Max. Storage Temperature Symbol VRWM IF(AV) IF(AV) IFSM RTJC TJ Tstg Condition 50% duty cycle, rectangular wave form (Single & Doubler) 50% duty cycle, rectangular wave form (Common Anode & Common Cathode) 8.3 ms, half Sine wave (per leg) (per leg) - Max. 100 15 Units V A 16 A 75 A 2.1 -65 to +200 -65 to +175 qC/W qC qC Max. 0.93 Units V 0.84 V 0.1 mA 3.0 mA 500 pF Electrical Characteristics: Characteristics Max. Forward Voltage Drop Symbol VF1 VF2 Max. Reverse Current IR1 IR2 Max. Junction Capacitance CT Condition @ 15A, Pulse, TJ = 25 qC (per leg) @ 15A, Pulse, TJ = 125 qC (per leg) @VR = 100V, Pulse, TJ = 25 qC (per leg) @VR = 100V, Pulse, TJ = 125 qC (per leg) @VR = 5V, TC = 25 qC fSIG = 1MHz, VSIG = 50mV (p-p) (per leg) x 221 WEST INDUSTRY COURT x DEER PARK, NY 11729-4681 x PHONE (631) 586-7600 x FAX (631) 242-9798 x x World Wide Web - http://www.sensitron.com x E-mail Address - [email protected] x SHD126234 SHD126234P SHD126234N SHD126234D SENSITRON TECHNICAL DATA DATA SHEET 653, REV. F Mechanical Dimensions: In Inches / mm .150 (3.81 Dia. .140 3.56) .665 (16.89 .645 16.38) 1.132 (28.75 1.032 26.21) 1 2 .045 (1.14 .035 0.89) 1 2 3 1 COMMON ANODE 2 DOUBLER 3 .100(2.54) BSC 2 Places 2 3 3 2 TO-257 Typical Forward Characteristics PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Reverse Characteristics Instantaneous Reverse Current - I R (mA) 101 101 1 .120(3.05) BSC PINOUT TABLE TYPE PIN 1 PIN 2 SINGLE RECTIFIER CATHODE ANODE DUAL RECTIFIER, COMMON CATHODE (P) ANODE 1 COMMON CATHODE DUAL RECTIFIER, COMMON ANODE (N) CATHODE 1 COMMON ANODE DUAL RECTIFIER, DOUBLER (D) ANODE ANODE/CATHODE Note: The Vf curves shown are for the SD125SCU100 unpackaged die only. 200 °C 175 °C 100 200 °C 175 °C 100 150 °C 125 °C 10-1 100 °C -2 10 75 °C 50 °C 10-3 25 °C 10-4 125 °C 0 20 40 60 80 100 Reverse Voltage - VR (V) 120 Typical Junction Capacitance Junction Capacitance - CT (pF) Instantaneous Forward Current - I F (A) 3 .430 (10.92 .410 10.41) 1 .035 (0.89 .025 0.63) 3 Places COMMON CATHODE .200 (5.08 .190 4.82) .420 (10.67 .410 10.41) .537 (13.64 .527 13.39) SINGLE 25 °C 10-1 10-2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - VF (V) 0.8 400 300 200 100 0 20 40 60 80 Reverse Voltage - VR (V) 100 120 x 221 WEST INDUSTRY COURT x DEER PARK, NY 11729-4681 x PHONE (631) 586-7600 x FAX (631) 242-9798 x x World Wide Web - http://www.sensitron.com x E-mail Address - [email protected] x SENSITRON TECHNICAL DATA DATA SHEET 653, REV. F SHD126234 SHD126234P SHD126234N SHD126234D DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. x 221 WEST INDUSTRY COURT x DEER PARK, NY 11729-4681 x PHONE (631) 586-7600 x FAX (631) 242-9798 x x World Wide Web - http://www.sensitron.com x E-mail Address - [email protected] x