15KE68

1.5KE6.8 ... 1.5KE440CA
1.5KE6.8 ... 1.5KE440CA
Unidirectional and bidirectional Transient Voltage Suppressor Diodes
Unidirectionale und bidirectionale Spannungs-Begrenzer-Dioden
Version 2014-09-05
Peak pulse power dissipation
Maximale Verlustleistung
7.5
Ø 1.2
Standard breakdown voltage range
Standard Abbruch-Spannungsbereich
6.8...440 V
Plastic case
Kunststoffgehäuse
± 0. 1
Type
6 2.5
± 0 .5
Ø 5.4 ± 0 . 1
1500 W
± 0. 05
Ø 5.4 x 7.5 [mm]
Weight approx.
Gewicht ca.
1.0 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped in ammo pack
Standard Lieferform gegurtet in Ammo-Pack
Dimensions - Maße [mm]
For bidirectional types (suffix “C” or “CA”), electrical characteristics apply in both directions.
Für bidirektionale Dioden (Suffix “C” oder “CA”) gelten die elektrischen Werte in beiden Richtungen.
Maximum ratings and Characteristics
Grenz- und Kennwerte
Peak pulse power dissipation (10/1000 µs waveform)
Impuls-Verlustleistung (Strom-Impuls 10/1000 µs)
TA = 25°C
PPPM
Steady state power dissipation
Verlustleistung im Dauerbetrieb
TA = 75°C
PM(AV)
6.5 W 2)
Peak forward surge current, 60 Hz half sine-wave
Stoßstrom für eine 60 Hz Sinus-Halbwelle
TA = 25°C
IFSM
200 A 3)
VBR ≤ 200 V
VBR > 200 V
VF
VF
< 3.5 V 3)
< 5 V 3)
Junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Tj
TS
-50...+175°C
-50...+175°C
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
RthA
< 19 K/W 2)
Thermal resistance junction to terminal
Wärmewiderstand Sperrschicht – Anschluss
RthT
< 8 K/W
Max. instantaneous forward voltage
Augenblickswert der Durchlass-Spannung
1
2
3
IF = 100 A
1500 W 1)
Non-repetitive pulse see curve IPP = f (tr) / PPP = f (tr)
Höchstzulässiger Spitzenwert eines einmaligen Impulses, siehe Kurve IPP = f (tr) / PPP = f (tr)
Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden
Unidirectional diodes only – Nur für unidirektionale Dioden
© Diotec Semiconductor AG
http://www.diotec.com/
1
1.5KE6.8 ... 1.5KE440CA
Maximum ratings
Type
Typ
1.5KE6.8
Grenzwerte
Breakdown voltage at IT = 1 mA
Abbruch-Spannung bei IT = 1 mA
*) at / bei IT = 10 mA
Stand-off voltage
Sperrspannung
Max. rev. current
Max. Sperrstrom
at / bei VWM
Max. clamping voltage
Max. Begrenzer-Spannung
at / bei IPPM (10/1000 µs)
VBR [V]
VWM [V]
ID [µA]
VC [V]
IPPM [A]
6.8 ± 10%
6.12...7.48 *)
5.5
1000
10.8
145
1.5KE6.8A
6.8 ± 5%
6.45...7.14 *)
5.8
1000
10.5
150
1.5KE7.5
7.5 ± 10%
6.75...8.25 *)
6.0
500
11.7
134
1.5KE7.5A
7.5 ± 5%
7.13...7.88 *)
6.4
500
11.3
139
1.5KE8.2
8.2 ± 10%
7.38...9.02 *)
6.6
200
12.5
126
1.5KE8.2A
8.2 ± 5%
7.79...8.61 *)
7.0
200
12.1
130
1.5KE9.1
9.1 ± 10%
8.19...10.0
7.3
50
13.8
114
1.5KE9.1A
9.1 ± 5%
8.65...9.55
7.7
50
13.4
117
1.5KE10
10 ± 10%
9.0...11.0
8.1
10
15.0
105
1.5KE10A
10 ± 5%
9.5...10.5
8.5
10
14.5
108
1.5KE11
11 ± 10%
9.9...12.1
8.9
5
16.2
97
1.5KE11A
11 ± 5%
10.5...11.6
9.4
5
15.6
100
1.5KE12
12 ± 10%
10.8...13.2
9.7
5
17.3
91
1.5KE12A
12 ± 5%
11.4...12.6
10.2
5
16.7
94
1.5KE13
13 ± 10%
11.7...14.3
10.5
5
19.0
82
1.5KE13A
13 ± 5%
12.4...13.7
11.1
5
18.2
86
1.5KE15
15 ± 10%
13.5...16.5
12.1
5
22.0
71
1.5KE15A
15 ± 5%
14.3...15.8
12.8
5
21.2
74
1.5KE16
16 ± 10%
14.4...17.6
12.9
5
23.5
67
1.5KE16A
16 ± 5%
15.2...16.8
13.6
5
22.5
70
1.5KE18
18 ± 10%
16.2...19.8
14.5
5
26.5
59
1.5KE18A
18 ± 5%
17.1...18.9
15.3
5
25.2
60
1.5KE20
20 ± 10%
18.0...22.0
16.2
5
29.1
54
1.5KE20A
20 ± 5%
19.0...21.0
17.1
5
27.7
56
1.5KE22
22 ± 10%
19.8...24.2
17.8
5
31.9
49
1.5KE22A
22 ± 5%
20.9...23.1
18.8
5
30.6
51
1.5KE24
24 ± 10%
21.6...26.4
19.4
5
34.7
45
1.5KE24A
24 ± 5%
22.8...25.2
20.5
5
33.2
47
1.5KE27
27 ± 10%
24.3...29.7
21.8
5
39.1
40
1.5KE27A
27 ± 5%
25.7...28.4
23.1
5
37.5
42
1.5KE30
30 ± 10%
27.0...33.0
24.3
5
43.5
36
1.5KE30A
30 ± 5%
28.5...31.5
25.6
5
41.4
38
1.5KE33
33 ± 10%
29.7...36.3
26.8
5
47.7
33
1.5KE33A
33 ± 5%
31.4...34.7
28.2
5
45.7
34
1.5KE36
36 ± 10%
32.4...39.6
29.1
5
52.0
30
1.5KE36A
36 ± 5%
34.2...37.8
30.8
5
49.9
31
1.5KE39
39 ± 10%
35.1...42.9
31.6
5
56.4
27
1.5KE39A
39 ± 5%
37.1...41.0
33.3
5
53.9
29
1.5KE43
43 ± 10%
38.7...47.3
34.8
5
61.9
25
1.5KE43A
43 ± 5%
40.9...45.2
36.8
5
59.3
26
1.5KE47
47 ± 10%
42.3...51.7
38.1
5
67.8
23
1.5KE47A
47 ± 5%
44.7...49.4
40.2
5
64.8
24
1.5KE51
51 ± 10%
45.9...56.1
41.3
5
73.5
21
1.5KE51A
51 ± 5%
48.5...53.6
43.6
5
70.1
22
2
http://www.diotec.com/
© Diotec Semiconductor AG
1.5KE6.8 ... 1.5KE440CA
Maximum ratings
Type
Typ
Grenzwerte
Breakdown voltage at IT = 1 mA
Abbruch-Spannung bei IT = 1 mA
*) at / bei IT = 10 mA
Stand-off voltage
Sperrspannung
Max. rev. current
Max. Sperrstrom
at / bei VWM
Max. clamping voltage
Max. Begrenzer-Spannung
at / bei IPPM (10/1000 µs)
VBR [V]
VWM [V]
ID [µA]
VC [V]
IPPM [A]
1.5KE56
56 ± 10%
50.4...61.6
45.4
5
81
19
1.5KE56A
56 ± 5%
53.2...58.8
47.8
5
77
20
1.5KE62
62 ± 10%
55.8...68.8
50.2
5
89
17
1.5KE62A
62 ± 5%
58.9...65.1
53.0
5
85
18
1.5KE68
68 ± 10%
61.2...74.8
55.1
5
98
16.0
1.5KE68A
68 ± 5%
64.6...71.4
58.1
5
92
17.0
1.5KE75
75 ± 10%
67.5...82.5
60.7
5
108
14.0
1.5KE75A
75 ± 5%
71.3...78.8
64.1
5
103
15.0
1.5KE82
82 ± 10%
73.8...90.2
66.4
5
118
13.0
1.5KE82A
82 ± 5%
77.9...86.1
70.1
5
113
13.9
1.5KE91
91 ± 10%
81.9...100
73.7
5
131
12.0
1.5KE91A
91 ± 5%
86.5...95.5
77.8
5
125
12.6
1.5KE100
100 ± 10%
90.0...110
81.0
5
144
10.9
1.5KE100A
100 ± 5%
95.0...105
85.5
5
137
11.4
1.5KE110
110 ± 10%
99.0...121
89.2
5
158
9.9
1.5KE110A
110 ± 5%
105...116
94.0
5
152
10.3
1.5KE120
120 ± 10%
108...132
97.2
5
173
9.1
1.5KE120A
120 ± 5%
114...126
102
5
165
9.5
1.5KE130
130 ± 10%
117...143
105
5
187
8.4
1.5KE130A
130 ± 5%
124...137
111
5
179
8.7
1.5KE150
150 ± 10%
135...165
121
5
215
7.3
1.5KE150A
150 ± 5%
143...158
128
5
207
7.6
1.5KE160
160 ± 10%
144...176
130
5
230
6.8
1.5KE160A
160 ± 5%
152...168
136
5
219
7.1
1.5KE170
170 ± 10%
153...187
138
5
244
6.4
1.5KE170A
170 ± 5%
162...179
145
5
234
6.7
1.5KE180
180 ± 10%
162...198
146
5
258
6.1
1.5KE180A
180 ± 5%
171...189
154
5
246
6.4
1.5KE200
200 ± 10%
180...220
162
5
287
5.4
1.5KE200A
200 ± 5%
190...210
171
5
274
5.7
1.5KE220
220 ± 10%
198...242
175
5
344
4.5
1.5KE220A
220 ± 5%
209...231
185
5
328
4.8
1.5KE250
250 ± 10%
225...275
202
5
360
4.3
1.5KE250A
250 ± 5%
237...263
214
5
344
4.5
1.5KE300
300 ± 10%
270...330
243
5
430
3.6
1.5KE300A
300 ± 5%
285...315
256
5
414
3.8
1.5KE350
335 ± 10%
315...385
284
5
504
3.1
1.5KE350A
350 ± 5%
332...368
300
5
482
3.2
1.5KE400
400 ± 10%
360...440
324
5
574
2.7
1.5KE400A
400 ± 5%
380...420
342
5
548
2.8
1.5KE440
440 ± 10%
396...484
356
5
631
2.4
1.5KE440A
440 ± 5%
418...462
376
5
602
2.6
© Diotec Semiconductor AG
http://www.diotec.com/
3
1.5KE6.8 ... 1.5KE440CA
120
[%]
tr = 10 µs
100
100
[%]
1
80
80
60
60
40
40
IPP
IPP
20
20
PPP
PPP
0
0
0
TA
100
50
150
[°C]
IPPM/2
PPPM/2
tP
0
1
2
3
[ms] 4
10/1000µs - pulse waveform
10/1000µs - Impulsform
1
Peak pulse power/current vs. ambient temperature )
Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1)
2
10
[kW]
unidir.
bidir.
VR = 4 V
[pF]
10
1
PPP
0.1
0.1µs
tP
1µs
10µs
100µs
1ms
10ms
Non repetitive peak pulse power versus pulse width (10/1000 wave form)
Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls)
Cj
[V]
VBR
Junction capacitance vs. breakdown voltage (typ.)
Sperrschichtkapazität in Abh. v.d. Abbruchspg. (typ.)
The range of type numbers is graded to the international E 24 standard. The standard tolerance of the
breakdown voltage for each type is ± 10%. Suffix “A” denotes a tolerance of ± 5% for the breakdown
voltage.
e.g.:
1.5KE51C = bidirectional diode, VBR = 51 V (± 10%), VWM ≥ 41.3 V at ID = 5 μA
1.5KE9.1A = unidirectional diode, VBR = 9.1 V (± 5%), VWM ≥ 7.7 V at ID = 50 μA
Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der
Abbruchspannung jedes einzelnen Typs beträgt in der Standardausführung ± 10%. Suffix “A” kennzeichnet
eine Toleranz der Abbruchspannung von ± 5%.
1
4
Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden
http://www.diotec.com/
© Diotec Semiconductor AG