1.5KE6.8 ... 1.5KE440CA 1.5KE6.8 ... 1.5KE440CA Unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirectionale und bidirectionale Spannungs-Begrenzer-Dioden Version 2006-05-10 Peak pulse power dissipation Maximale Verlustleistung 7.5 ±0.1 Type 62.5 ±0.5 Ø 5.4 ±0.1 Ø 1.2 ±0.05 1500 W Standard breakdown voltage range Standard Abbruch-Spannungsbereich 6.8...440 V Plastic case Kunststoffgehäuse Ø 5.4 x 7.5 [mm] Weight approx. Gewicht ca. 1.0 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack Dimensions - Maße [mm] For bidirectional types (suffix “C” or “CA”), electrical characteristics apply in both directions. Für bidirektionale Dioden (Suffix “C” oder “CA”) gelten die elektrischen Werte in beiden Richtungen. Maximum ratings and Characteristics Grenz- und Kennwerte Peak pulse power dissipation (10/1000 µs waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 µs) TA = 25°C PPPM Steady state power dissipation Verlustleistung im Dauerbetrieb TA = 75°C PM(AV) 6.5 W 2) Peak forward surge current, 60 Hz half sine-wave Stoßstrom für eine 60 Hz Sinus-Halbwelle TA = 25°C IFSM 200 A 3) VBR ≤ 200 V VBR > 200 V VF VF < 3.5 V 3) < 5 V 3) Junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj TS -50...+175°C -50...+175°C Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft RthA < 19 K/W 2) Thermal resistance junction to terminal Wärmewiderstand Sperrschicht – Anschluss RthT < 8 K/W Max. instantaneous forward voltage Augenblickswert der Durchlass-Spannung 1 IF = 100 A 1500 W 1) Non-repetitive pulse see curve IPP = f (tr) / PPP = f (tr) Höchstzulässiger Spitzenwert eines einmaligen Impulses, siehe Kurve IPP = f (tr) / PPP = f (tr) 2 3 Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden Unidirectional diodes only – Nur für unidirektionale Dioden © Diotec Semiconductor AG http://www.diotec.com/ 1 1.5KE6.8 ... 1.5KE440CA Maximum ratings Type Typ 1.5KE6.8 Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM VBR [V] VWM [V] ID [µA] VC [V] IPPM [A] Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 µs) 6.8 ± 10% 6.12...7.48 *) 5.5 1000 10.8 145 1.5KE6.8A 6.8 ± 5% 6.45...7.14 *) 5.8 1000 10.5 150 1.5KE7.5 7.5 ± 10% 6.75...8.25 *) 6.0 500 11.7 134 1.5KE7.5A 7.5 ± 5% 7.13...7.88 *) 6.4 500 11.3 139 1.5KE8.2 8.2 ± 10% 7.38...9.02 *) 6.6 200 12.5 126 1.5KE8.2A 8.2 ± 5% 7.79...8.61 *) 7.0 200 12.1 130 1.5KE9.1 9.1 ± 10% 8.19...10.0 7.3 50 13.8 114 1.5KE9.1A 9.1 ± 5% 8.65...9.55 7.7 50 13.4 117 1.5KE10 10 ± 10% 9.0...11.0 8.1 10 15.0 105 1.5KE10A 10 ± 5% 9.5...10.5 8.5 10 14.5 108 1.5KE11 11 ± 10% 9.9...12.1 8.9 5 16.2 97 1.5KE11A 11 ± 5% 10.5...11.6 9.4 5 15.6 100 1.5KE12 12 ± 10% 10.8...13.2 9.7 5 17.3 91 1.5KE12A 12 ± 5% 11.4...12.6 10.2 5 16.7 94 1.5KE13 13 ± 10% 11.7...14.3 10.5 5 19.0 82 1.5KE13A 13 ± 5% 12.4...13.7 11.1 5 18.2 86 1.5KE15 15 ± 10% 13.5...16.5 12.1 5 22.0 71 1.5KE15A 15 ± 5% 14.3...15.8 12.8 5 21.2 74 1.5KE16 16 ± 10% 14.4...17.6 12.9 5 23.5 67 1.5KE16A 16 ± 5% 15.2...16.8 13.6 5 22.5 70 1.5KE18 18 ± 10% 16.2...19.8 14.5 5 26.5 59 1.5KE18A 18 ± 5% 17.1...18.9 15.3 5 25.2 60 1.5KE20 20 ± 10% 18.0...22.0 16.2 5 29.1 54 1.5KE20A 20 ± 5% 19.0...21.0 17.1 5 27.7 56 1.5KE22 22 ± 10% 19.8...24.2 17.8 5 31.9 49 1.5KE22A 22 ± 5% 20.9...23.1 18.8 5 30.6 51 1.5KE24 24 ± 10% 21.6...26.4 19.4 5 34.7 45 1.5KE24A 24 ± 5% 22.8...25.2 20.5 5 33.2 47 1.5KE27 27 ± 10% 24.3...29.7 21.8 5 39.1 40 1.5KE27A 27 ± 5% 25.7...28.4 23.1 5 37.5 42 1.5KE30 30 ± 10% 27.0...30.0 24.3 5 43.5 36 1.5KE30A 30 ± 5% 28.5...31.5 25.6 5 41.4 38 1.5KE33 33 ± 10% 29.7...36.3 26.8 5 47.7 33 1.5KE33A 33 ± 5% 31.4...34.7 28.2 5 45.7 34 1.5KE36 36 ± 10% 32.4...39.6 29.1 5 52.0 30 1.5KE36A 36 ± 5% 34.2...37.8 30.8 5 49.9 31 1.5KE39 39 ± 10% 35.1...42.9 31.6 5 56.4 27 1.5KE39A 39 ± 5% 37.1...41.0 33.3 5 53.9 29 1.5KE43 43 ± 10% 38.7...47.3 34.8 5 61.9 25 1.5KE43A 43 ± 5% 40.9...45.2 36.8 5 59.3 26 1.5KE47 47 ± 10% 42.3...51.7 38.1 5 67.8 23 1.5KE47A 47 ± 5% 44.7...49.4 40.2 5 64.8 24 1.5KE51 51 ± 10% 45.9...56.1 41.3 5 73.5 21 1.5KE51A 51 ± 5% 48.5...53.6 43.6 5 70.1 22 2 http://www.diotec.com/ © Diotec Semiconductor AG 1.5KE6.8 ... 1.5KE440CA Maximum ratings Type Typ Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM VBR [V] VWM [V] ID [µA] VC [V] IPPM [A] Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 µs) 1.5KE56 56 ± 10% 50.4...61.6 45.4 5 81 19 1.5KE56A 56 ± 5% 53.2...58.8 47.8 5 77 20 1.5KE62 62 ± 10% 55.8...68.8 50.2 5 89 17 1.5KE62A 62 ± 5% 58.9...65.1 53.0 5 85 18 1.5KE68 68 ± 10% 61.2...74.8 55.1 5 98 16.0 1.5KE68A 68 ± 5% 64.6...71.4 58.1 5 92 17.0 1.5KE75 75 ± 10% 67.5...82.5 60.7 5 108 14.0 1.5KE75A 75 ± 5% 71.3...78.8 64.1 5 103 15.0 1.5KE82 82 ± 10% 73.8...90.2 66.4 5 118 13.0 1.5KE82A 82 ± 5% 77.9...86.1 70.1 5 113 13.9 1.5KE91 91 ± 10% 81.9...100 73.7 5 131 12.0 1.5KE91A 91 ± 5% 86.5...95.5 77.8 5 125 12.6 1.5KE100 100 ± 10% 90.0...110 81.0 5 144 10.9 1.5KE100A 100 ± 5% 95.0...105 85.5 5 137 11.4 1.5KE110 110 ± 10% 99.0...121 89.2 5 158 9.9 1.5KE110A 110 ± 5% 105...116 94.0 5 152 10.3 1.5KE120 120 ± 10% 108...132 97.2 5 173 9.1 1.5KE120A 120 ± 5% 114...126 102 5 165 9.5 1.5KE130 130 ± 10% 117...143 105 5 187 8.4 1.5KE130A 130 ± 5% 124...137 111 5 179 8.7 1.5KE150 150 ± 10% 135...165 121 5 215 7.3 1.5KE150A 150 ± 5% 143...158 128 5 207 7.6 1.5KE160 160 ± 10% 144...176 130 5 230 6.8 1.5KE160A 160 ± 5% 152...168 136 5 219 7.1 1.5KE170 170 ± 10% 153...187 138 5 244 6.4 1.5KE170A 170 ± 5% 162...179 145 5 234 6.7 1.5KE180 180 ± 10% 162...198 146 5 258 6.1 1.5KE180A 180 ± 5% 171...189 154 5 246 6.4 1.5KE200 200 ± 10% 180...220 162 5 287 5.4 1.5KE200A 200 ± 5% 190...210 171 5 274 5.7 1.5KE220 220 ± 10% 198...242 175 5 344 4.5 1.5KE220A 220 ± 5% 209...231 185 5 328 4.8 1.5KE250 250 ± 10% 225...275 202 5 360 4.3 1.5KE250A 250 ± 5% 237...263 214 5 344 4.5 1.5KE300 300 ± 10% 270...330 243 5 430 3.6 1.5KE300A 300 ± 5% 285...315 256 5 414 3.8 335 ± 10%0 315...385 284 5 504 3.1 1.5KE350A 350 ± 5% 332...368 300 5 482 3.2 1.5KE400 400 ± 10% 360...440 324 5 574 2.7 1.5KE400A 400 ± 5% 380...420 342 5 548 2.8 1.5KE440 440 ± 10% 396...484 356 5 631 2.4 1.5KE440A 440 ± 5% 418...462 376 5 602 2.6 1.5KE350 © Diotec Semiconductor AG http://www.diotec.com/ 3 1.5KE6.8 ... 1.5KE440CA 120 [%] tr = 10 µs 100 100 [%] 80 80 60 60 40 40 IPP IPP 20 20 PPP PPP 0 0 0 TA 100 50 150 [°C] IPPM/2 PPPM/2 tP 0 1 1 2 3 [ms] 4 10/1000µs - pulse waveform 10/1000µs - Impulsform Peak pulse power/current vs. ambient temperature ) Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1) 1 2 10 [kW] 10 1 PPP 0.1 0.1µs tP 1µs 10µs 100µs 1ms 10ms Non repetitive peak pulse power versus pulse width (10/1000 wave form) Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls) The range of type numbers is graded to the international E 24 standard. The standard tolerance of the breakdown voltage for each type is ± 10%. Suffix “A” denotes a tolerance of ± 5% for the breakdown voltage. e.g.: 1.5KE51C = bidirectional diode, VBR = 51 V (± 10%), VWM ≥ 41.3 V at ID = 5 μA 1.5KE9.1A = unidirectional diode, VBR = 9.1 V (± 5%), VWM ≥ 7.7 V at ID = 50 μA Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der Abbruchspannung jedes einzelnen Typs beträgt in der Standardausführung ± 10%. Suffix “A” kennzeichnet eine Toleranz der Abbruchspannung von ± 5%. 1 4 Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden http://www.diotec.com/ © Diotec Semiconductor AG