20PIN 1.95X2.45MM.50 PTH

MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
20 PIN FLIP CHIP CSP
CASE 499A–01
ISSUE O
DATE 05/14/2002
1
SCALE 4:1
4X
0.10 C
TERMINAL A1
LOCATOR
D
Ç
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. COPLANARITY APPLIES TO SPHERICAL
CROWNS OF SOLDER BALLS.
B
DIM
A
A1
A2
D
E
b
e
D1
E1
E
A1
0.10 C
A2
A
0.05 C
MILLIMETERS
MIN
MAX
--0.700
0.210
0.270
0.380
0.430
2.450 BSC
1.950 BSC
0.290
0.340
0.500 BSC
2.000 BSC
1.500 BSC
MARKING
DIAGRAM
C
SEATING
PLANE
ÇÇ
1
XXD
D1
e
XX = Device Code
D
= Date Code
D
20 X
b
0.05 C A B
0.03 C
C
E1
B
e
A
1
2
3
4
5
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make
changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indem nify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
 Semiconductor Components Industries, LLC, 2002
May, 2002 – Rev. 01O
1
Case Outline Number:
499A