MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS JUPITER − PInPAK 10.5x10.5 PLLP CASE 500−02 ISSUE B SCALE1:1 DATE 31 MAR 2003 2X NOTE 3 A D 4X 0.10 B 0.15 C P3 C A B M N L2 2 X R4 e3 e4 H1 E H CL N3 H2 J N2 A A2 N1 e5 N4 12 X R3 8X L 12 X 0.08 C 0.10 A1 A3 SEATING PLANE C e DETAIL M M b C A B K NOTE 3 NOTE 3 F 4X 9X 0.10 P2 L1 M C A B CL 0.10 M C A B APPLIES TO ALL H AND N DIMENSIONS DETAIL M R 4X r = 0.38 e1 CL G G1 G2 2 X R1 R2 0.10 M 2 X P1 C A B e2 NOTE 3 CL DOCUMENT NUMBER: F1 F2 DIMENSION TABLE AND MARKING DIAGRAM ON FOLLOWING PAGE P NOTE 3 0.10 M C A B 0.10 M C A B APPLIES TO ALL F AND G DIMENSIONS 98AON11493D Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed STATUS: ON SEMICONDUCTOR STANDARD versions are uncontrolled except when stamped “CONTROLLED COPY” in red. NEW STANDARD: Semiconductor Components Industries, LLC, 2002 Case Outline Number: http://onsemi.com 10.5 X 10.5 PLLP, PInPAK DESCRIPTION: October, 2002 − Rev. 0 PAGE 1 OFXXX 3 1 JUPITER − PInPAK 10.5x10.5 PLLP CASE 500−02 ISSUE B DATE 07 MAR 2003 GENERIC MARKING DIAGRAM xxxxxxx YYWW xx = Specific Device Code YY = Year WW = Work Week DOCUMENT NUMBER: 98AON11493D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION APPLIES TO PLATED TERMINAL IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM TERMINAL EDGE. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. DIM A A1 A2 A3 D E b e e1 e2 e3 e4 e5 F F1 F2 G G1 G2 H H1 H2 J K L L1 L2 N N1 N2 N3 N4 P P1 P2 P3 R R1 R2 R3 R4 MILLIMETERS MIN MAX 2.000 2.200 0.000 0.050 1.500 1.700 0.508 REF 10.500 BSC 10.500 BSC 0.306 0.406 3.496 BSC 3.261 BSC 1.969 BSC 2.424 BSC 0.762 BSC 0.762 BSC 0.124 BSC 0.037 BSC 4.114 BSC 0.229 BSC 3.200 BSC 3.289 BSC 1.424 BSC 0.283 BSC 2.188 BSC 3.048 BSC 2.286 BSC 0.154 0.354 0.230 0.430 0.230 0.430 2.936 BSC 1.495 BSC 2.197 BSC 2.361 BSC 2.663 BSC 1.512 1.712 1.589 1.789 2.996 3.196 1.512 1.712 2.761 2.961 3.161 3.361 3.339 3.539 0.689 0.889 2.094 2.244 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed STATUS: ON SEMICONDUCTOR STANDARD versions are uncontrolled except when stamped “CONTROLLED COPY” in red. NEW STANDARD: Semiconductor Components Industries, LLC, 2002 Case Outline Number: http://onsemi.com 10.5 X 10.5 PLLP, PInPAK DESCRIPTION: October, 2002 − Rev. 0 PAGE 2 OFXXX 3 2 DOCUMENT NUMBER: 98AON11493D PAGE 3 OF 3 ISSUE REVISION DATE O RELEASED FOR PRODUCTION. REQ. BY S. BLACK 02 MAY 02 A e2, WAS e3, ADDED F1, e5 WAS e4. REQ. BY S. CHANG 17 JUL 02 B ADDED ROUNDED EDGE TO PADS, CHANGED DIM “B” TO “b”. DIM “e” WAS 3.438, “e1” WAS 3.200, “F” WAS 0.094, “G” WAS 0.259, “P1” WAS 3.056, 3.256, “R” WAS 2.821, 3.021. REQ. BY K. KIME 07 MAR 2003 PInPAK is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indem nify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. Semiconductor Components Industries, LLC, 2003 March, 2003 − Rev. 0 Case Outline Number: 500