ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014 ABB i-bus® KNX Selection Tables MDRC = Modular DIN-rail Component, SM = Surface Mounting, FM = Flush Mounting, LF = Light Fitting, *PG = Price Group, **MW = Module Width 18 mm, HVAC = Heating/Ventilation/Air-Conditioning ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 1 A B A 2 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Contents 1 Power Supplies 2 System Components and Interfaces 10 6 3 Connection and Wiring 13 4 Room Automation 14 5 Inputs 21 6 Outputs 26 7 Shutters and Sun Protection 31 8 Illumination and Light Sensors 36 9 Heating and Cooling 47 10 Control, Logic and Time 53 11 Visualisation, Display and Signalling 12Operation 55 60 13 Electricity Meters 113 14 Security and Surveillance 137 15 WaveLINE Wireless Control 154 16 Newron – Integration in Building Management Systems 167 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 3 A ABB i-bus® KNX-Overview ETHERNET 230 V Mains Supply A Power Supply Measure energy consumption IP-Router Programming (ETS), Analysis (i-bus ® Tool), Visualization KNXnet/IP, OPC, Remote access, Interfacing to other systems - Energy Meter with Meter Interface Module - Energy Module Switch energy with and without current detection - Switch Actuator Switch energy with energy measurement - Energy Actuator Switch, dim and control light Digital lighting control by the use of DALI Drive control of rolling shutters, blinds and ventilation fl aps with and without automatic travelling time detection Heating/cooling by the control of valves Ventilation/climatization - Universal Dim Actuator - Switch/Dim Actuator 1–10 V - Light Controller - DALI Gateway - DALI Light Controller - DALI Gateway with Emergency Lighting Control - Blind/Roller Shutter Actuator - SMI Blind-/Roller Shutter Actuator - Electronic Switch Actuator - Valve Drive Actuator - Electromotor Valve Drive - Blower/Fan Coil Actuator - Fan Coil Actuator and Controller Room Controller with functional modules Actuator functions 4 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 KNX-Main Line/TP Power Supply Line Coupler Line 1 2 3 4 … … 13 14 15 - 64 devices/line - 15 lines/area with superordinated main line - max. 15 areas with superordinated area line - Binary Input Detect and evaluate switching commands - Analogue Input Capture, evaluate and monitor physical values Evaluate and monitor meteorological data (wind, temperature, rain, etc.) - Weather Station and Weather Sensor Display operating conditions and control functions Detect presence and movement - Presence Detector - Movement Sensor - Light Sensor Measure brightness level Lighting Control A - Logic Module - Application Unit Logic - Application Unit Time - Time Switch B ≥1 y A & y B Capture, evaluate, monitor and control room conditions, temperature, air quality, etc. - Room Thermostat - Air Quality Sensor - Security Terminal - Security Module - KNX Security Panel - Fault Monitoring Unit - Monitoring Unit - Data Logging Unit Perform logical operations and trigger timer-controlled functions Monitor operating conditions, signal technical faults, recognize hazards and trigger alarms 12 V Security System Sensor functions Room Master devices with different coMWinations of inputs and outputs and internal logical interconnection Solutions for rooms with sensor and actuator functions ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 5 A ABB i-bus® KNX Power Supplies A 1 Power Supply, 160 mA, MDRC NEW KNX power supplies generate and monitor the KNX system voltage (SELV). The bus line is decoupled from the power supply by an integrated choke. The voltage output is short-circuit and overload protected. The two-color LED indicates device output status. With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz. SV/S 30.160.1.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 4 SV/S 30.160.1.1 2CDG110144R0011 1 kg 0.30 Power Supply, 320 mA, MDRC NEW KNX power supplies generate and monitor the KNX system voltage (SELV). The bus line is decoupled from the power supply by an integrated choke. The voltage output is short-circuit and overload protected. The two-color LED indicates device output status. With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz. SV/S 30.320.1.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 4 SV/S 30.640.3.1 SV/S 30.320.1.1 2CDG110166R0011 1 kg 0.30 Power Supply, 640 mA, MDRC NEW KNX power supplies generate and monitor the KNX system voltage (SELV). The bus line is decoupled from the power supply by an integrated choke. The voltage output is short-circuit and overload protected. The two-color LED indicates device output status. Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke). With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 4 SV/S 30.640.3.1 2CDG110167R0011 6 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg 0.30 ABB i-bus® KNX Power Supplies Power Supply with diagnostics, 320 mA, MDRC NEW Compact Power Supply with integrated choke. Quick diagnostics by LED display and ETS communication objects. Analysis of the operating state and the bus line possible by means of ABB i-bus tool. Description MW Type Order code SV/S 30.320.2.1 4 SV/S 30.320.2.1 2CDG110145R0011 Price Pack Weight 1 pc. unit 1 pc. E pc. 1 kg 0.26 Power Supply with diagnostics, 640 mA, MDRC NEW Compact Power Supply with integrated choke. Quick diagnostics by LED display and ETS communication objects. Analysis of the operating state and the bus line possible by means of ABB i-bus tool. Additional voltage output to supply an additional line in conjunction with an additional choke. Description MW Type Order code SV/S 30.640.5.1 4 SV/S 30.640.5.1 2CDG110146R0011 Price Pack Weight 1 pc. unit 1 pc. E pc. 1 kg 0.26 Uninterruptible Power Supply, 640 mA, MDRC Power supply with integrated choke for supplying a bus line from an uninterrupted supply. Quick diagnostics via LED display for operational readiness, fault and battery level as well as a floating contact for a fault signal indication. The accumulator module or up to 2 rechargeable batteries can be charged in normal operation by the voltage supply. The bus voltage is provided by the batteries in the event of a mains failure. SU/S 30.640.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 8 SU/S 30.640.1 GHQ6310049R0111 1 kg 0.55 Battery Module, 12 V DC, MDRC With lead-gel battery for use in uninterruptible power supply SU/S 30.640.1 and for maintaining the bus voltage during a mains failure for 10 minutes (at full load). Connection is made via 4-core standard cable. Description MW Type Order code AM/S 12.1 Price Pack Weight 1 pc. unit 1 pc. E pc. 8 AM/S 12.1 GHQ6310062R0111 1 kg 0.81 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 7 A A 1 ABB i-bus® KNX Power Supplies A 1 KS/K 4.1 KS/K 2.1 Cable Sets For connection of sealed lead gel batteries SAK7, SAK12 and SAK17 to the uninterruptible KNX power supply SU/S 30.640.1 or the uninterruptible power supply NTU/S 12.2000.1. If only one battery is connected, the basic cable set KS/K 4.1 with integrated temperature sensor is to be used. In case two batteries are connected in parallel, the basic cable set KS/K 4.1 is to be used for the first battery and the extension cable set KS/K 2.1 is to used for the second battery. It is not permitted to connect more than two batteries in parallel. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg Basic – KS/K 4.1 GHQ6301910R0001 1 0.18 Extension – KS/K 2.1 GHQ6301910R0011 1 0.12 Sealed Lead Acid Batteries, 12 V DC For maintaining the bus voltage during a mains failure. For connection to the uninterruptible power supply SU/S 30.640.1 or the uninterruptible power supply NTU/S 12.2000.1. A maximum of two batteries of the same type can be connected in parallel. For connection, the cable sets KS/K 4.1 and KS/K 2.1 are to be used. Description MW Type Order code SAK17, SAK12, SAK7 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 7.2 Ah – SAK7 GHV9240001V0011 1 2.98 12 Ah – SAK12 GHV9240001V0012 1 4.66 18 Ah – SAK17 GHV9240001V0013 1 7.15 Choke, MDRC The device can be used together with the SV/S 30.640.5 to supply a second line. Integrated reset button for resetting the bus devices. Connection via connection terminals. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 2 DR/S 4.1 2CDG110029R0011 1 kg 0.16 DR/S 4.1 Commissioning Power Supply, 28 V DC, 30 mA For temporary power supply of KNX devices during commissioning. The Euroconnector and plug-in terminal provide faster connection and supply of devices with manual operation (e.g. FCA/S). Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. NTI/Z 28.30.1 – NTI/Z 28.30.1 2CDG110096R0011 8 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg 0.14 ABB i-bus® KNX Power Supplies Power Supply Units, MDRC The supply units that can be used universally as the auxiliary power supply in KNX installations or other SELV applications. The devices supply a regulated output voltage of 12 V DC or 24 V DC with a maximum output current of 1.6 A or 0.8 A. The units are protected against overload, the output being able to sustain a continuous short circuit. LED indication of the status of the supply and output voltage. Description MW Type Order code NT/S 12.1600 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 12 V DC, 1.6 A 4 NT/S 12.1600 GHQ6050056R0002 1 0.26 24 V DC, 0.8 A 4 NT/S 24.800 GHQ6050057R0002 1 0.26 Uninterruptible Power Supply, 640 mA, MDRC Power supply with integrated choke for supplying a bus line from an uninterrupted supply. Quick diagnostics via LED display for operational readiness, fault and battery level as well as a floating contact for a fault signal indication. The accumulator module or up to 2 rechargeable batteries can be charged in normal operation by the voltage supply. The bus voltage is provided by the batteries in the event of a mains failure. NTU/S 12.2000.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 12 V DC, 2 A 8 NTU/S 12.2000.1 2CDG110070R0011 1 kg 0.43 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 9 A A 1 ABB i-bus® KNX System Components and Interfaces A 2 Line Coupler, MDRC The line coupler is used in larger installations to connect KNX lines or areas. The lines or areas are galvanically isolated from one another. Telegrams can be filtered to simultaneously reduce the telegram traffic between lines or areas. With ETS 4 (V4.1.2 and higher) the complete group address range of the main groups 0...31 can be filtered. Within a line, the LK/S 4.2 can also be used as a line amplifier (repeater). LK/S 4.2 Description MW 2 Type LK/S 4.2 Order code 2CDG110171R0011 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 1 0.1 IP Router, MDRC The IP Router is the interface between the KNX installations and the IP networks. It can be used as a quick line or area coupler or utilise the local network (LAN) for quick exchange of telegrams between the lines/areas. With ETS 3.0, KNX devices can be programmed via LAN. The device uses the KNXnet/IP protocol of the KNX Association (Routing and Tunnelling). The IP address can be fixed or received from a DHCP server. The device requires a 10 to 30 V DC power supply. IPR/S 2.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 2 IPR/S 2.1 2CDG110061R0011 1 kg 0.11 IP Interface, MDRC Interface between the KNX installations and IP networks for programming KNX devices in conjunction with ETS 3.0 or for transferring telegrams to/from the LAN (e.g. for visualisation). The device uses the EIBnet/IP protocol of the KNX Association (Tunnelling). The IP address can be fixed or received from a DHCP server. The device requires a 10 to 30 V DC power supply. Description MW Type Order code IPS/S 2.1 Price Pack Weight 1 pc. unit 1 pc. E pc. 2 IPS/S 2.1 2CDG110098R0011 1 kg 0.11 IP Switch, Master, MDRC IP Switch Master for MDRC installation. For networking of up to 5 end devices. Can be extended to 10 end devices by side connection of the IP Switch Slave (ISS/S). One of the ports is a Gigabit Ethernet enabled and can serve as an uplink port. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. ISM/S 5.1 6 ISM/S 5.1 2CDG120034R0011 10 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg 0.35 ABB i-bus® KNX System Components and Interfaces A A 2 IP Switch, Slave, MDRC IP Switch Slave for MDRC installation. For networking of up to 5 end devices. Can be side connected to the IP Switch Master (ISM/S), accordingly can be extended to 10 end devices. The slave is only functional together with the master. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. ISS/S 5.1 6 ISS/S 5.1 2CDG120035R0011 1 kg 0.23 Patch Panel PoE 3gang, MDRC For the setup of small and medium-sized network installations. For the power supply of up to 3 terminal devices such as IP telephone or IP webcams direct via the network cable. For all PoE applications of class 0 to 3, such as IP telephone, IP cameras, WLAN access points or PoE switches. External power supply via 8186/04 necessary. 8186/03-500 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 8186/03-500 8100-0-0344 kg 1 Power supply PoE 48 V, DRA For the setup of small and medium-sized network installations. For the power supply of patch panel PoE 3gang 8186/03. Nominal voltage: 100 – 240 V. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 8186/04-500 – 8186/04-500 8100-0-0346 kg 1 IP Patch Module, MDRC The IP Patch Module consists of an RJ-45 module and a mounting adapter for rail mounting. Description MW 1 Type IPM/S 1.1 Order code 2CDG120036R0011 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 1 0.1 IPM/S 1.1 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 11 ABB i-bus® KNX System Components and Interfaces A 2 USB Interface, MDRC For connection of a PC via the USB port for programming and diagnostics from ETS3. Display of connection and data transfer via LED. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 2 USB/S 1.1 USB/S 1.1 2CDG110008R0011 1 kg 0.12 Optical Fibre Interface, MDRC The device is used to couple two sections of an bus line using an optical fibre link. Ideal for bridging longer distances or to avoid having to implement lightning and overvoltage protection when laying cables between buildings. Two devices are needed to complete a transmission link. Description MW Type Order code LL/S 1.1 Price Pack Weight 1 pc. unit 1 pc. E pc. 4 LL/S 1.1 GHQ6050053R0001 1 kg 0.28 KNX/EnOcean Gateway, SM NEW To connect and integrate EnOcean devices into KNX networks with bidirectional data exchange. The KNX/EnOcean Gateway sends its data within the 868.3 MHz frequency band which is only approved for EnOcean in the European Union incl. Switzerland, Turkey & Norway. Please ensure that the product is suitable for application in the intended country of final installation and use before purchase. Dimensions: (L x W x H) 100 x 70 x 28. Description MW Type Order code EG/A 32.2.1 – 6770-500 EG/A 32.2.1 2CDG120047R0011 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 1 0.1 KNX TP/RF WaveLine Gateway, SM Media converter with internal antenna for conversion of KNX RF WaveLine radio signals to KNX twisted pair networks with 24 channels. For the evaluation and transfer of up to 24 channels each with 4 sub-channels as transmitter or receiver. Simple operation due to “programming button” and display on the device. Is surface-mounted. The KNX/WaveLine Gateway is powered via KNX and does not require an additional power supply. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6770-500 6770-0-0002 WaveLINE components are available in chapter WaveLINE wireless control. 12 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg ABB i-bus® KNX Connection and Wiring Diagnosis and Protection Module, MDRC Enables quick diagnosis of the bus state and indicates telegram traffic via an LED. A bus fault is indicated by contacts. The DSM also suppresses transient overvoltages and interference voltage spikes on the bus and thus protects the connected devices. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. DSM/S 1.1 2 DSM/S 1.1 2CDG110060R0011 1 kg 0.11 Wiring Jumpers For the interconnection of devices with a bus connection terminal. The vertical and horizontal versions are matched to typical wiring applications. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. VB/K … PS 1/4/6-KNX kg horizontal, 100 mm 2 VB/K 100.1 GHQ6301908R0003 10 0.05 horizontal, 200 mm 4 VB/K 200.1 GHQ6301908R0001 10 0.06 vertical, 270 mm – VB/K 270.1 GHQ6301908R0002 10 0.09 vertical, 360 mm – VB/K 360.1 GHQ6301908R0004 10 0.12 Busbars For interconnection of the phase supply to multiple input terminals on devices such as SD/S, SA/S, 6197, … . They reduce the wiring effort and ensure safe interconnection. The PS 1/4/6 is prefabricated and can be used immediately. The PS 1/60/6 is cut to the desired length and sealed with end caps. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. PS-END 1-S kg 1 phase, 4 contacts – PS 1/4/6-KNX 2CDG924003R0011 10 0.012 1 phase, 60 contacts – PS 1/60/6-KNX 2CDG924004R0011 1 0.11 End cap – PS-END 1-S 2CDL000001R0001 25 0.001 Connection Terminals For connecting bus devices as well as for looping through or branching the bus cable. Available in black/red for use as bus connecting terminal, in blue as bus connecting terminal with surge protector and in white/yellow for use as a connecting terminal. Description MW Type Order code US/E 1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg black/red – BUSKLEMME GHQ6301901R0001 50 0.1 white/yellow with surge protector – – KLEMME US/E 1 GHQ6301902R0001 GHQ6310009R0001 50 1 0.1 0.02 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 13 A A 3 ABB i-bus® KNX Room Automation – Easy Planning through Flexibility A 4 RC/A KNX RC/A The fundamental principle: One device per room A single Room Controller controls all the room functions. This “one device per room” principle economically and flexibly provides KNX functionality: With 4 or 8 modules, which are simply inserted into the basis device, all loads in this room (lights, blinds, heating, etc.) can be controlled. Economic security from the outset The installation concept of the Room Controller, particularly the simple plug-in module concept, provides security and reliability. – When planning the infrastructure of a building: It can be undertaken without exact knowledge of the subsequent user demands. – During commissioning: When user demands have been determined, they are implemented by simple insertion of modules. – In operation in a building: Modifications to the room utilisation are easy to implement. The changes to the cable routing are limited to the room concerned. Improved fire protection included The significant reduction in the wiring also considerably reduces the fire load and thus improves safety for persons and assets. Save on energy and not on comfort Each room is used differently. The different module assignments of the Room Controller can be configured accordingly. Just three examples of special building functions that can be implemented with the device. In the lighting sector Constant lighting control is not the only conceivable solution. A high level of comfort can be assured by the control of different light scenes. Blinds and roller shutters Not only do they provide pleasant shading, they also assist in responsible use of energy. Intelligent facade controls move the blinds to suit the position of the sun. Heating/Ventilation/Air conditioning The control of electrothermal valves on radiators is no problem for the “electronic switch actuator” module of the Room Controller. The ventilation can also be integrated into this automatic control. 14 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Room Automation Overview of switching performance SA/M 2.6.1 SA/M 2.16.1 SD/M 2.6.2 LR/M 1.6.2 UD/M 1.300.1 Semiconductor output, dimmed via phase interval or phase control ES/M 2.230.1 ES/M 2.24.1 Outputs Load circuits 2 relay outputs 2 relay outputs, 2 relay outputs floating 1 relay output U n rated voltage 250/440 V AC 250/440 V AC 250/440 V AC 250/440 V AC In rated current 6 AX 16 A 6 AX 6 AX 2 x 1…10 V DC 1 x 1…10 V DC (passive) (passive) 30 mA 30 mA Control outputs Max. control current Max. cable length 100 m 100 m 2 semiconductor outputs for resistive loads, inrush current: max. 1 A, continuous current: max. 700 mA Max. output power 300 VA at 230 V AC 150 VA at 127 V AC Min. output power: 2 VA Switching current per output AC3 operation (cos ϕ = 0.45) EN 60 947-4-1 6 A / 230 V 8 A / 230 V 6 A / 230 V 6 A / 230 V AC1 operation (cos ϕ = 0.45) EN 60 947-4-1 6 A / 230 V 16 A / 230 V 6 A / 230 V 6 A / 230 V 6 A / 250 V (70 μF) 100 mA / 12 V 100 mA / 24 V 16 A / 250 V (70 μF) 100 mA / 12 V 100 mA / 24 V 6 A / 250 V (70 μF) 100 mA / 12 V 100 mA / 24 V 6 A / 250 V (70 μF) 100 mA / 12 V 100 mA / 24 V 6 A / 24 V= 16 A / 24 V= 6 A / 24 V= 6 A / 24 V= 1380 W 2300 W 1380 W 1380 W – Uncompensated 1380 W 2300 W 1380 W 1380 W – Parallel compensated 1380 W 1500 W 1380 W 1380 W – DUO connection 1380 W 1500 W 1380 W 1380 W – Inductive transformer 1200 W 1200 W 1200 W 1200 W – Electronic transformer 1380 W 1500 W 1380 W 1380 W – Halogen lamp 230 V 1380 W 2300 W 1380 W 1380 W – Uncompensated 1100 W 1100 W 1100 W 1100 W – Parallel compensated 1100 W 1100 W 1100 W 1100 W – Uncompensated 1380 W 2000 W 1380 W 1380 W – Parallel compensated 1380 W 2000 W 1380 W 1380 W – Max. peak inrush-current Ip (150 μs) 400 A 400 A 400 A 400 A – Max. peak inrush-current Ip (250 μs) 320 A 320 A 320 A 320 A – Max. peak inrush-current Ip (600 μs) 200 A 200 A 200 A 200 A – 18 W (ABB EVG 1x18 CF) 23 23 23 23 – 24 W (ABB EVG-T5 1x24 CY) 23 23 23 23 – 36 W (ABB EVG 1x36 CF) 14 14 14 14 – 58 W (ABB EVG 1x58 CF) 11 11 11 11 – 80 W (Helvar EL 1x80 SC) 10 10 10 10 Fluorescent lighting load AX to EN 60 669 Minimum switching capacity DC current switching capacity (resistive load) Lamp loads at 230 V AC – Incandescent lamp load Fluorescent lamps T5 / T8 Low-volt halogen lamps Dulux lamp Mercury-vapour lamp Switching capacity Number of electronic ballasts (T5/T8, single element) Further technical specifications can be found in the corresponding product manuals at www.abb.com/knx ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 15 A A 4 ABB i-bus® KNX Room Automation – Room Controller Basis Devices A 4 Room Controller The Room Controller controls all the functions in the room as a central device. Due to its modular design, it can be adapted flexibly to the required functionality. On-site installation enables short assembly and commissioning times. A structured cable entry creates clarity and flexibility for changes in function – both during planning and operation. Configuration example RC/A 8.1 Special features – – Height 50 mm: optimised for underfloor installation or suspended ceilings – – Room Controller counts as just one bus device –– Robust housing, IP 54 degree of protection –– Manual operation for immediate testing – even without bus voltage –– Comprehensive software functionality Room Controller, Basis Device for 4 Modules, SM It accommodates up to 4 plug-in modules and controls their functions. The RC/A 4.2 communicates as a bus device. Any module type can be plugged into each module slot. A manual control for module function test is integrated. Dimensions: (H x W x D) 200 x 275 x 50. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. RC/A 4.2 – RC/A 4.2 2CDG110104R0011 1 kg 0.98 Room Controller, Basis Device for 8 Modules, SM It accommodates up to 8 plug-in modules and controls their functions. Any module type can be plugged into each module slot. The inserted module is automatically detected. The manual operation facility enables an immediate function test even when bus voltage is not applied. Dimensions: (H x W x D) 270 x 316 x 50. Description MW Type Order code RC/A 8.2 Price Pack Weight 1 pc. unit 1 pc. E pc. – RC/A 8.2 2CDG110106R0011 1 kg 1.695 Please note: With the new DALI Light Controller 4-fold, SM DLR/A 4.8.1.1 the DALI Lighting Control can be integrated in a decentralised KNX installation too! Further information about DLR/A 4.8.1.1 in chapter 8. 16 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Room Automation – Room Controller Function Modules Binary Input Modules, 4-fold Each of the modules provides 4 inputs. There are 3 module types available for the connection of 115/230 V, 12/24 V (AC or DC) or floating contacts to cover all demands. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. BE/M 4.230.1 kg 230 V – BE/M 4.230.1 2CDG110005R0011 1 0.13 12/24 V – BE/M 4.24.1 2CDG110006R0011 1 0.13 Contact scanning – BE/M 4.12.1 2CDG110007R0011 1 0.13 Switch Actuator Module, 2-fold, 6 A For switching loads up to 16 A at a maximum continuous current of 6 A. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – SA/M 2.6.1 SA/M 2.6.1 2CDG110002R0011 1 kg 0.17 Switch Actuator Module, 2-fold, 16 A, floating contacts For switching two loads up to 16 A. The switched voltage is independent of the basic device and is connected directly to the module. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. SA/M 2.16.1 – SA/M 2.16.1 2CDG110100R0011 1 kg 0.16 Shutter Actuator Modules, 2-fold For controlling two independent blind or shutter drives. There are two module types available for 115/230 V AC or 24 V DC drives. Description JA/M 2.230.1 MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg 230 V AC – JA/M 2.230.1 2CDG110003R0011 1 0.17 24 V DC – JA/M 2.24.1 2CDG110004R0011 1 0.17 Switch/Dim Actuator Module, 2-fold, 6 AX It enables the switching and dimming of two groups of luminaries in conjunction with electronic ballasts via a 1…10 V control voltage. Enhanced swiching capacity. (Replaces the SD/M 2.6.1). Description MW Type Order code SD/M 2.6.2 Price Pack Weight 1 pc. unit 1 pc. E pc. – SD/M 2.6.2 2CDG110107R0011 1 kg 0.17 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 17 A A 4 ABB i-bus® KNX Room Automation – Room Controller Function Modules A 4 Light Controller Module, 1-fold, 6 AX Enables switching and dimming of a lighting group via 1...10 V control voltage. The device can be used for constant lighting control in conjunction with Light Sensor LF/U 2.1. (Replaces the LR/M 1.6.1). Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. LR/M 1.6.2 – LR/M 1.6.2 2CDG110108R0011 1 kg 0.13 Universal Dim Actuator Module, 1-fold, 300 VA For dimming incandescent lamps, 230 V or low-voltage halogen lamps up to 300 W/VA. The automatic load detection detects the connected load and optimises the control. The minimum load is just 2 W. Description MW Type Order code UD/M 1.300.1 Price Pack Weight 1 pc. unit 1 pc. E pc. – UD/M 1.300.1 2CDG110012R0011 1 kg 0.18 Electronic Switch Actuator Module, 2-fold With 2 overload-proof outputs for noiseless control of heating systems and chilled ceilings via thermoelectric valve drives. Two module types for voltages from 115/230 V or 24 V (AC or DC) are available. Description MW Type Order code ES/M 2.230.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 115/230 V – ES/M 2.230.1 2CDG110013R0011 1 0.15 24 V – ES/M 2.24.1 2CDG110014R0011 1 0.15 18 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Room Automation – Room Master RM/S 1.1 RM/S 2.1 Room Master The Room Master is a KNX device with a combination of inputs and outputs. The quantities, technical data and the functions of these inputs and outputs are compiled, so that overall control of all the functions in rooms of a live-in character or apartments, are implemented via a device. Typical areas of application of the Room Master are hotel rooms, hospital rooms as well as apartments in institutions for residential care or in student residential homes. The Room Master with its compact design covers all the basic requirements for – – Lighting control – – Heating/Air conditioning – – Shading control (shutters, blinds or curtains - with the RM/S 2.1) – – Control of further loads via switched electrical sockets Function extensions are possible at any time, e.g. devices for dimming via ABB i-bus® KNX. Overview of the inputs and outputs Binary inputs RM/S 1.1 8 RM/S 2.1 RM/S 3.1 RM/S 4.1 Application possibilities 18 12 8 For connection of switches or push-but- via contact scanning tons (light on/off, shutter up/down,etc.) or sensors (window contacts, door contacts, water sensors, condensation RM/S 3.1 water sensors, hotel acrd readers, etc.) Outputs 20 A (16 AX) 1 3 4 – Bathroom fan, switching of electrical Outputs 16 A (10 AX) 2 1 – – Auxiliary electrical heating of fan-coil Outputs 6 A 3 12 – 8 3-speed fan control (at RM/S 1.1 and Outputs 0.5 A 4 4 – – Valve control (heating, cooling) – 1 4 (configu- – sockets units (at RM/S 1.1 and 2.1), lighting RM/S 4.1 2.1), lighting electronic Outputs 6 A changeover contact Blind or roller blind control rable as switch outputs too) – – RM/S 1.1 and RM/S 2.1 are preprogrammed ex factory – – RM/S 3.1 and RM/S 4.1 are programmable with predefined and tested example projects (ETS 4) for different fields of application (office, schools, hotel rooms, ...) – – Commissioning of the preprogrammed devices on the construction site without notebook and ETS programming. With the electrical connection all room functions are available. – – Optional functional extensions via integration into KNX networks with ETS software. Further information about Room Master on www.abb.com/knx Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. Inputs, Outputs, Fan Coil Inputs, Outputs, Blind kg 8 12 RM/S 1.1 RM/S 2.1 2CDG110094R0011 2CDG110095R0011 1 1 0.45 0.76 12 RM/S 3.1 NEW 2CDG110165R0011 1 0.55 8 RM/S 4.1 NEW 2CDG110170R0011 1 0.3 Control, Fan Coil Inputs, Outputs, Blind Control or Outputs Inputs, Outputs ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 19 A A 4 ABB i-bus® KNX Room Automation – Flush-mounted Combined Devices A 4 6173/11 U-500 Flush-mounted combined actuator For controlling blind or awning motors. For connecting thermoelectric actuating drives. With 3 inputs and 2 outputs. A first output (O1) allows the control of electrically-operated Venetian blinds, roller shutters, awnings, venting louvers or similar blinds for 230 V AC mains voltage. One additional electronic switching output (O2) allows silent control of electrothermal valve drives for heating or cooling systems. The bus can be connected via enclosed terminal block. Rated voltage: 230 V~, +10% / –10%, 50 Hz – 60 Hz. Input polling voltage 5V. O1 Rated current 3 A, cos ϕ 0.8; Output voltage: 250 V~. O2: Rated current: 25 mA, cos ϕ 1, Output voltage: 250 V~. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6151/11 U-500 6173/11 U-500 6151-0-0249 1 kg 0.07 Switch actuator, 16 A For switching 230 V~ consumers. Equipped with two extension inputs which depending on parameterization can act directly on the switching output or alternatively as binary inputs on the KNX bus. One Normally open contact, potential free; switching voltage: 230 V AC; 50/60 Hz; max. switching current: 16 A; switching capacity: up to 2.500 W depending on the consumer. Rated voltage: 230 V~, +10% / –10%, 50 Hz – 60 Hz. The bus can be connected via enclosed terminal block. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6151/11 U-500 6151-0-0245 1 kg 0.07 Blind actuator For controlling blind or awning motors. With 3 inputs and 1 change-over output – normally open contact, potential-bound –. Rated voltage: 230 V~, +10% / – 10%, 50 Hz – 60 Hz. Input polling voltage: 5 V. Output rated current: 3 A, cos ϕ 0.8, Output voltage: 250 V~. The bus can be connected via enclosed terminal block. 6152/11 U-500 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6152/11 U-500 6152-0-0040 1 kg 0.06 Heating actuator 1 electronic output (noiseless) For connecting thermoelectric actuating drives. The device possesses three additional input. Rated voltage: 230 V~, +10% /–10%, 50 Hz – 60 Hz. Input polling voltage 5 V. OutputRated current: 25 mA, cos ϕ 1. Output voltage: 250 V~. The bus can be connected via enclosed terminal block. 6164/11 U-500 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6164/11 U-500 6151-0-0247 20 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg 0.05 ABB i-bus® KNX Inputs A A 5 Application Operation of KNX systems via conventional push buttons and switches Wide-range inputs and a streamlined range – The new ABB i-bus® KNX Binary Inputs. Processing of binary signals (signalling contacts) Benefits Flexible application due to wide-range inputs Reduced stock requirement due to ABB i-bus® KNX Binary Inputs serve as an interface for operation of KNX systems via conventional push buttons and switches as well as for processing binary signals (signalling contacts). streamlined product range Simplified commissioning using the copy function Product BE/S 4.20.2.1 with 4 inputs for contact scanning and manual operation BE/S 4.230.2.1 with 4 wide-range inputs and manual operation In contrast to the existing solutions, where the input voltages of 24 V and 230 V required separate devices, the new Binary Inputs now feature widerange inputs, which can process voltage signals ranging from 10 to 230 V AC/DC. This offers the installer significantly greater flexibility. BE/S 8.20.2.1 with 8 inputs for contact scanning and manual operation BE/S 8.230.2.1 with 8 wide-range inputs and manual operation In addition to two devices with 4 and 8 wide-range inputs, the new ABB i-bus® KNX Binary Input product range is rounded off by two devices with 4 and 8 inputs with scanning voltage. On these types, a pulsed scanning voltage is provided for connection of floating contacts from the device. All Binary Inputs feature a high-quality membrane keypad for comfortable manual operation and display of the device functions. Input states can be simulated at the device, so that the conventional push buttons, switches or floating contacts do not need to be connected for commissioning purposes. The device functions can be easily tested during commissioning in this way. The Binary Inputs are powered via the KNX and do not require an additional power supply. The software functionality of the Binary Inputs has also been extended. It is now possible to send several switching telegrams with just a single push of a button. Especially useful, just as in the case of the Switch Actuators, it is also possible to copy the channels of the device in the ETS. The parameters and group addresses of a channel can be simply transferred to other channels in this way. This simplifies project engineering and helps reduce sources of error. With an identical range of applications, the number of ABB i-bus® KNX Binary Inputs is now reduced from 6 types to 4. ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 21 ABB i-bus® KNX Inputs A 5 Binary Inputs Selection Table BE/S 4.20.2.1 BE/S 4.230.2.1 BE/S 8.20.2.1 BE/S 8.230.2.1 US/U 2.2 US/U 4.2 US/U 12.2 – General Voltage range – 10…230 V – 10…230 V – – Voltage type – AC/DC – AC/DC – – – Contact scanning n – n – n n n Inputs 4 4 8 8 2 4 12 MDRC MDRC MDRC MDRC FM FM FM 2 2 4 4 – – – Send switch value after any edge Send switch value after signal length and/or cyclically Send switch value 1 cyclically n n n n n n n n n n n n n n n n n n n n n Send switch value 2 n n n n Send switch value 3 n n n n Difference between short and long operation n n n n n n n Start-stop dimming, step-by-step dimming n n n n n n n One-touch dimming n n n n n n n Shutter operation via a push button/switch n n n n n n n Shutter operation via two push buttons/switches n n n n n n n 1 bit [0/1], 2 bit forced operation n n n n n n n 1/2/4 bytes n n n n n n n Signed n n n n 3 byte, time, weekday n n n n 8 bit scene n n n n n n n Store scene n n n n n n n Several preset sequences can be set Link several push buttons in a switching sequence (actuating number) Multiple operation n n n n n n n n n n n n n n Telegram for long operation n n n n n n n Multiple operation can be set n n n n n n n Adjustable data type and threshold values n n n n n n Temporary counter activation n n n n n n Send counter level cyclically n n n n n n Energy-saving mode n n n n Enable/release manual operation n n n n Manual operating status n n n n Enable/release manual operation button per input n n n n Input LED can be inverted n n n n Copying and exchanging parameter settings n n n n Enable/disable input Adjustable debounce time and minimum signal time Limit the number of telegrams n n n n n n n n n n n n n n n n n n n n n Device sends an “In operation” telegram” n n n n Heating valve control (electric relay) n n n Switch LEDs n n n Type of installation Module width (space unit) Switch sensor Dim sensor Shutter Sensor Value/Forced operation Control scene Switching sequence Pulse counter Manual operation Special functions n = Function is supported 22 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Inputs Binary Inputs, 10 – 230 V AC/DC, MDRC Detects AC/DC signals in the voltage range from 12...230 V. The state of the input is displayed via yellow LEDs. The binary inputs enable detection of independent input signals. The devices feature a manual operation pushbutton for each channel. The devices are powered via the ABB i-bus® and do not require an additional power supply. Description MW Type Order code BE/S 8.230.2.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 4-fold 2 BE/S 4.230.2.1 2CDG110091R0011 1 0.12 8-fold 4 BE/S 8.230.2.1 2CDG110093R0011 1 0.23 Binary Inputs, Contact Scanning, MDRC Scans floating contacts with internally generated scanning voltage. The state of the input is displayed via yellow LEDs. The binary inputs enable detection of independent input signals. The devices feature a manual operation pushbutton for each channel. The devices are powered via the ABB i-bus® and do not require an additional power supply. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. BE/S 4.20.2.1 kg 4-fold 2 BE/S 4.20.2.1 2CDG110090R0011 1 0.12 8-fold 4 BE/S 8.20.2.1 2CDG110092R0011 1 0.23 Universal Interface, FM The universal interface has 2, 4 or 12 channels which can be parametrised as inputs or outputs with the ETS software. Conventional push-buttons, auxiliary contacts, LEDs and the electronic relay ER/U can be connected. The connecting cables can be extended up to 10 m. The contact scanning voltage and the supply voltage for the LEDs are made available by the device, the series resistors for the LEDs are integrated. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. US/U 4.2 kg 2-fold – US/U 2.2 GHQ6310074R0111 1 0.06 4-fold – US/U 4.2 GHQ6310070R0111 1 0.06 12-fold – US/U 12.2 2CDG110065R0011 1 0.08 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 23 A A 5 ABB i-bus® KNX Inputs A 5 AE/S 4.1.1.3 Analogue Input, 4-fold, MDRC NEW Analogue Input, 2-fold, SM Used wherever analogue variables should be detected. The sophisticated housing concept of the surface mounted device and the new screw terminals of the MDRC device enable quick and clear wiring and improve the speed of connection of the sensors. Comprehensive range of adjustment for many typical sensors (1 – 10 V, 0(4) – 20 mA, 0 – 1 V, PT 100, PT 1000,…) for detection of temperature, brightness, fill levels, etc. For active sensors the auxiliary voltage is supplied by AE/S 4.1.1.3; in case of AE/A 2.1 a separate auxiliary voltage supply is required. Availability January 2015 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 4-fold, MDRC 4 AE/S 4.1.1.3 2CDG110190R0011 1 2-fold, SM – AE/A 2.1 2CDG110086R0011 1 kg 0.3 AE/A 2.1 Analogue Input, 4-fold, MDRC To be discontinued It is used to detect and process 4 independent analogue input signals according to IEC 60381 (0 – 1 V, 0 – 5 V, 0 – 10 V, 1 – 10 V, 0 – 20 mA, 4 – 20 mA, 0 – 1000 Ohm, PT 100 in 2-wire technology and floating contacts). The 24 V DC voltage for the sensors (max. 300 mA) is also supplied by the device. The mains voltage supply is 115 … 230 V AC, 50/60 Hz. Description MW Type Order code Weight 1 pc. unit 1 pc. E pc. AE/S 4.2 4 WZ/S 1.3.1.2 Price Pack AE/S 4.2 2CDG110030R0011 1 kg 0.23 Weather Unit, MDRC and Weather Sensor, SM NEW It is used to detect and process weather data from weather sensor. It supplies data for twilight and brightness levels in 3 directions, rain, temperature, information on day/night, wind speed, date and time. An additional input for the connection of a PT - 1000 sensor is provided. Four value memories which can store up to 24 values each are available. The Weather Unit WZ/S 1.3.1.2 can be operated either with the new Weather Sensor WES/A 3.1 or with the former sensor WES/A 2.1. The Weather Unit also provides the supply voltage for the connected sensor. The Weather Unit has to be supplied with a operating voltage of 85 to 265 V AC. The Weather Unit supports the ABB i-bus Tool for advanced diagnosis and improved commissioning. The Weather Sensor WES/A 3.1 detects twilight, brightness in three directions, rain, temperature, day/night, wind speed and the date and time using a GPS module. An additional heating transformer is not required. The new Weather Sensor WES/A 3.1 can be connected to the new Weather Unit WZ/S 1.3.1.2 or to the former Weather Unit WZ/S 1.1. Availability January 2015 WES/A 3.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg Weather Unit 4 WZ/S 1.3.1.2 2CDG110184R0011 0.20 Weather Sensor – WES/A 3.1 2CDG120046R0011 0.17 24 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Inputs Weather Unit, MDRC and Weather Sensor, SM To be discontinued It is used to detect and process weather data from weather sensor. It supplies data for twilight and brightness levels in 3 directions, rain, temperature, information on day/night, wind speed, date and time (DCF radio receiver). Four value memories which can store up to 24 values each are available. The Weather Unit WZ/S 1.1 is has been configured for the Weather Sensor WES/A and supplies it with power. The device can be operated optionally with a operating voltage of 115 to 230 V AC, 50/60 Hz. WZ/S 1.1 The Weather Sensor WES/A 1.1 detects twilight, brightness in three directions, rain, temperature, day/night, wind speed and the date and time using the radio receiver. An additional heating transformer is not required. Description MW Type Order code Weight 1 pc. unit 1 pc. E pc. WES/A 2.1 WS/S 4.1.1.2 Price Pack kg 4 WZ/S 1.1 2CDG110034R0011 1 0.23 – WES/A 2.1 2CDG120033R0011 1 0.39 Weather Station, 4-fold, MDRC NEW All common weather sensors for wind speed, wind direction, rain, amount of rain, brightness, light intensity, pyranometers, twilight, air pressure, humidity or temperature can be connected to the device. The power supply generates the 24 V DC voltage for external sensors (max. 300 mA). The device can be operated with 85 to 265 V AC, 50/60 Hz. The application software is configured for the detection of weather based data and enables quick sensor programming. The Weather Station supports the ABB i-bus Tool for advanced diagnosis and improved commissioning. Availability January 2015 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 4 WS/S 4.1.1.2 2CDG110191R0011 kg 0.27 Weather Station, 4-fold, MDRC To be discontinued All common weather sensors for wind speed, wind direction, rain, amount of rain, brightness, light intensity, pyranometers, twilight, air pressure, humidity or temperature can be connected to the device. The power supply generates the 24 V DC voltage for external sensors (max. 300 mA). The device can be operated with 115 to 230 V AC, 50/60 Hz. The application software is configured for the detection of weather based data and enables quick sensor programming. WS/S 4.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 4 WS/S 4.1 2CDG110032R0011 1 kg 0.23 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 25 A A 5 ABB i-bus® KNX Outputs – A Complete Switch Actuator Range A 6 Switch Actuators are responsible for reliable switching of different electrical loads in the KNX system. Many different load situations are possible. ABB offers a suitable Switch Actuator for all application areas. The range has been rounded off with a new series. Now 16/20 AX C-Load Switch Actuators with and without a current detection feature are available; each featuring 2, 4, 8 or 12 outputs. In the following table, you will find an overview of the ABB i-bus® Switch Actuators and their type designations: – SA/S 2.6.2.1 SA/S 2.10.2.1 SA/S 2.16.2.1 SA/S 2.16.5.1 SA/S 2.16.6.1 SA/S 4.6.1.1 SA/S 4.6.2.1 SA/S 4.10.2.1 SA/S 4.16.2.1 SA/S 4.16.5.1 SA/S 4.16.6.1 SA/S 8.6.1.1 SA/S 8.6.2.1 SA/S 8.10.2.1 SA/S 8.16.2.1 SA/S 8.16.5.1 SA/S 8.16.6.1 SA/S 12.6.1.1 SA/S 12.6.2.1 SA/S 12.10.2.1 SA/S 12.16.2.1 SA/S 12.16.5.1 SA/S 12.16.6.1 Note: The codes represent the following: SA/S= Switch Actuator, DIN Rail mounting SA/S x. x = Number of outputs SA/S 8.y. y = Rated current in Ampere A SA/S 8.16.1 1 = Standard without manual operation SA/S 8.16.2 2 = With manual operation SA/S 8.16.5 5 = C-Load (200 µF) SA/S 8.16.6 6 = C-Load with current detection SA/S 8.16.6.z z =Version 26 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Outputs – Switching Capacity Overview The following table provides and overview of the rated values, switching performance, lamp loads or the number of lamps, which can be connected to a contact: SA/S 2.6.2.1 SA/S 2.10.2.1 SA/S 2.16.2.1 SA/S 2.16.5.1 SA/S 4.6.1.1 SA/S 4.6.2.1 SA/S 4.10.2.1 SA/S 4.16.2.1 SA/S 4.16.5.1 SA/S 2.16.6.1 SA/S 4.16.6.1 SA/S 8.6.1.1 SA/S 8.6.2.1 SA/S 8.10.2.1 SA/S 8.16.2.1 SA/S 8.16.5.1 SA/S 8.16.6.1 SA/S 12.6.1.1 SA/S 12.6.2.1 SA/S 12.10.2.1 SA/S 12.16.2.1 SA/S 12.16.5.1 SA/S 12.16.6.1 In rated current (A) 6A 6 AX 10 AX 16 A Un rated voltage (V) 250/440 V AC 250/440 V AC 250/440 V AC 250/440 V AC 250/440 V AC AC1 operation (cos ϕ = 0.8) DIN EN 60947-4-1 6A 6A 10 A 16 A 20 A 20 A AC3 operation (cos ϕ = 0.45) DIN EN 60947-4-1 6A 6A 8A –4) 16 A 16 A – C-Load switching capacity – – Fluorescent lighting load AX to EN 60669-1 6 A (35 μF) Minimum switching capacity 10 mA/12 V 100 mA/12 V DC current switching capacity (resistive load) 7 A/24 V = 6 A/24 V = > 10 > 3 x 10 Mechanical service life 3) 6 AX (140 μF) 7 16/20 AX C-Load 16/20 AX C-Load – 20 A 20 AX (200 μF) 100 mA/12 V 100 mA/12 V 100 mA/12 V 100 mA/12 V 10 A/24 V = 16 A/24 V = 20 A/24 V = 20 A/24 V = 6 > 3 x 10 6 > 3 x 10 > 10 > 106 3) 16 A (70 μF) 20 A 3) 3) 10 AX (140 μF) 250/440 V AC 6 6 3) 20 AX (200 μF) 3) Electronic endurance to IEC 60947-4-1: – Rated current AC1 (240 V/0.8) 100,000 100,000 100,000 100,000 100,000 100,000 – Rated current AC3 (240 V/0.45) 15,000 30,000 30,000 30,000 30,000 30,000 – Rated current AC5a (240 V/0.45) 15,000 30,000 30,000 30,000 30,000 30,000 Incandescent lamp load at 230 V AC 1,200 W 1,380 W 2,500 W 2,500 W 3,680 W 3,680 W – Uncorrected 800 W 1,380 W 2,500 W 2,500 W 3,680 W 3,680 W – Parallel compensated 300 W 1,380 W 1,500 W 1,500 W 2,500 W 2,500 W – DUO circuit 350 W 1,380 W 1,500 W 1,500 W 3,680 W 3,680 W – Inductive transformer 800 W 1,200 W 1,200 W 1,200 W 2,000 W 2,000 W – Electronic transformer 1,000 W 1,380 W 1,500 W 1,500 W 2,500 W 2,500 W Halogen lamp 230 V 1,000 W 1,380 W 2,500 W 2,500 W 3,680 W 3,680 W – Uncorrected 800 W 1,100 W 1,100 W 1,100 W 3,680 W 3,680 W – Parallel compensated 800 W 1,100 W 1,100 W 1,100 W 3,000 W 3,000 W Fluorescent lamp T5 / T8: Low-voltage halogen lamps: Dulux lamps: Mercury-vapour lamps: – Uncorrected – Parallel compensated 1,000 W 1,380 W 2,000 W 2,000 W 3,680 W 3,680 W 800 W 1,380 W 2,000 W 2,000 W 3,000 W 3,000 W Sodium-vapour lamps: – Uncorrected 1,000 W 1,380 W 2,000 W 2,000 W 3,680 W 3,680 W – Parallel compensated 800 W 1,380 W 2,000 W 2,000 W 3,000 W 3,000 W Max. peak inrush-current Ip (150 μs) 200 A 400 A 400 A 400 A 600 A 600 A Max. peak inrush-current Ip (250 μs) 160 A 320 A 320 A 320 A 480 A 480 A Max. peak inrush-current Ip (600 μs) 100 A 200 A 200 A 200 A 300 A 300 A 18 W (ABB ballasts 1 x 18 SF) 10 ballasts 23 ballasts 23 ballasts 23 ballasts 261) ballasts 261) ballasts 24 W (ABB ballasts 1 x 24 CY) 10 ballasts 23 ballasts 23 ballasts 23 ballasts 26 ballasts 261) ballasts 36 W (ABB ballasts 1 x 36 CF) 7 ballasts 14 ballasts 14 ballasts 14 ballasts 22 ballasts 22 ballasts 58 W (ABB ballasts 1 x 58 CF) 5 ballasts 11 ballasts 11 ballasts 11 ballasts 121) ballasts 121) ballasts 80 W (Helvar EL 1 x 80 SC) 3 ballasts 10 ballasts 10 ballasts 10 ballasts 121) ballasts 121) ballasts Number of electronic ballasts (T5/T8, single element): 2) 1) 1) The number of ballasts is limited by the protection with B16/B20 circuit-breakers. 2) For multiple element lamps or other types, the number of electronic ballasts must be determined using the peak inrush current of the electronic ballasts. 3) The maximum peak inrush current may not be exceeded. 4) Not intended for AC3 operation, see Technical Data for maximum AC3 current. ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 27 A A 6 ABB i-bus® KNX Outputs – An Overview of all Software Functions A 6 The following table provides an overview of the functions possible with the Switch Actuators and their application programs: SA/S 2.6.2.1 SA/S 2.10.2.1 SA/S 2.16.2.1 SA/S 2.16.5.1 SA/S 4.6.1.1 SA/S 4.6.2.1 SA/S 4.10.2.1 SA/S 4.16.2.1 SA/S 4.16.5.1 SA/S 2.16.6.1 SA/S 4.16.6.1 SA/S 8.6.1.1 SA/S 8.6.2.1 SA/S 8.10.2.1 SA/S 8.16.2.1 SA/S 8.16.5.1 SA/S 8.16.6.1 SA/S 12.6.1.1 SA/S 12.6.2.1 SA/S 12.10.2.1 SA/S 12.16.2.1 SA/S 12.16.5.1 SA/S 12.16.6.1 Type of installation MDRC MDRC MDRC MDRC MDRC MDRC Number of outputs 4/8/12 2/4/8/12 2/4/8/12 2/4/8/12 2/4/8/12 2/4/8/12 Module width (space unit) 4/6/8 2/4/8/12 2/4/8/12 2/4/8/12 2/4/8/12 2/4/8/12 Manual operation – Contact position display – In rated current (A) 6A 6 AX 10 AX 16 A Current detection – – – – – – ON/OFF delay – Staircase light – Warning before end of staircase lighting – Staircase lighting time set via object – Flashing – Switch response can be set (N.O./N.C.) – Thresholds Current detection – – – – – – Threshold value monitoring – – – – – – Measured value detection – – – – – Function Scene – Logic AND function – Logic OR function – Logic XOR function – Gate function Priority object/forced operation – Switch ON/OFF (2 point control) – Cyclical fault monitoring 16/20 AX C-Load 16/20 AX C-Load Switch function Function Logic Heating/fan control – Automatic purging Fan Coil control – Default position on bus voltage failure/recovery – Status messages 1) Special functions See special ABB i-bus® KNX devices of the HVAC area, e.g. Fan/Fan Coil actuator LFA/S or Fan Coil actuator FCA/S. = possible functions 1) 28 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Outputs Switch Actuators, 6 A, MDRC Using floating contacts it switches 4, 8 or 12 independent electrical loads. The 6 A-AC3 devices are suited for switching resistive, inductive and capacitive loads. Please note: Increased module width compared to previous generation. Description MW Type Order code SA/S 8.6.1.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 4-fold 4 SA/S 4.6.1.1 2CDG110152R0011 1 0.15 8-fold 6 SA/S 8.6.1.1 2CDG110153R0011 1 0.22 12-fold 8 SA/S 12.6.1.1 2CDG110154R0011 1 0.30 Switch Actuators, 6 A, MDRC, Manual Operation Switches 2, 4, 8 and 12 independent electrical loads using floating contacts. Every output can be operated manually and features display of the switching state. The 6 A-AC3 devices are suited for switching resistive, inductive and capacitive loads. Description MW Type Order code SA/S 8.6.2.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 2-fold 2 SA/S 2.6.2.1 2CDG110180R0011 1 0.18 4-fold 4 SA/S 4.6.2.1 2CDG110181R0011 1 0.29 8-fold 8 SA/S 8.6.2.1 2CDG110182R0011 1 0.51 12-fold 12 SA/S 12.6.2.1 2CDG110183R0011 1 0.74 Switch Actuators, 10 AX, MDRC Switches 2, 4, 8 and 12 independent electrical loads using floating contacts. Every output can be operated manually and features display of the switching state. The 10AX-AC1 devices are especially suited for switching resistive, inductive and capacitive loads such as fluorescent lighting (AX) compliant to EN 60669. Description MW Type Order code SA/S 4.10.2.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 2-fold 2 SA/S 2.10.2.1 2CDG110155R0011 1 0.18 4-fold 4 SA/S 4.10.2.1 2CDG110156R0011 1 0.29 8-fold 8 SA/S 8.10.2.1 2CDG110157R0011 1 0.51 12-fold 12 SA/S 12.10.2.1 2CDG110158R0011 1 0.74 Switch Actuators, 16 AC1, MDRC Switches 2, 4, 8 and 12 independent electrical loads using floating contacts. Every output can be operated manually and features display of the switching state. The 16A-AC1 devices are suited for switching resistive, inductive and capacitive loads. Description MW Type Order code SA/S 8.16.2.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 2-fold 2 SA/S 2.16.2.1 2CDG110159R0011 1 0.17 4-fold 4 SA/S 4.16.2.1 2CDG110160R0011 1 0.29 8-fold 8 SA/S 8.16.2.1 2CDG110161R0011 1 0.51 12-fold 12 SA/S 12.16.2.1 2CDG110162R0011 1 0.67 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 29 A A 6 ABB i-bus® KNX Outputs A 6 Switch Actuator, 16/20 AX, C-Load, MDRC Uses floating contacts to switch independent electrical loads via ABB i-bus ® KNX. Every output can be operated manually and features display of the switching state. The 16AX-AC3, C-Load devices are especially suited for switching loads with high surge currents such as luminaries with ballasts or fluorescent lighting (AX) according to EN 60669. Description MW Type Order code SA/S 12.16.5.1 Price Pack Weight 1 pc. unit 1 pc. E pc. SA/S 8.16.6.1 kg 2-fold 2 SA/S 2.16.5.1 2CDG110132R0011 1 0.21 4-fold 4 SA/S 4.16.5.1 2CDG110133R0011 1 0.38 8-fold 8 SA/S 8.16.5.1 2CDG110134R0011 1 0.69 12-fold 12 SA/S 12.16.5.1 2CDG110137R0011 1 0.90 Switch Actuator with Current Detection, 16/20 AX, C-Load Switches with floating contacts, 2, 4, 8 or 12 independent electrical loads with high surge currents. The Switch Actuators feature a circuit for high precision current detection for each output that is used to monitor the connected circuits. Every output can be operated manually and features display of the switching state. The 16/20A, C-Load devices are especially suited for switching loads with high surge currents such as luminaries with ballasts or fluorescent lighting (AX) according to EN 60669. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg 2-fold 2 SA/S 2.16.6.1 2CDG110112R0011 1 0.21 4-fold 4 SA/S 4.16.6.1 2CDG110113R0011 1 0.38 8-fold 8 SA/S 8.16.6.1 2CDG110114R0011 1 0.69 12-fold 12 SA/S 12.16.6.1 2CDG110138R0011 1 0.90 I/O Actuator, 6 A, MDRC For the control of loads in residential areas, typically in hotel rooms and apartments. The I/O Actuators provide binary inputs for the connection of conventional push-buttons and outputs for switching loads. Inputs and outputs can be internally connected by ETS. By integrating the devices into KNX networks further functions can be realised: e.g. central control or room based emergency calls to a control centre. IO/S 4.6.1.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg 4-fold 4 IO/S 4.6.1.1 2CDG110168R0011 1 0.17 8-fold 8 IO/S 8.6.1.1 2CDG110169R0011 1 0.3 Analogue Actuator, 4-fold and Analogue Actuator Module, 4-fold, MDRC The device outputs receives telegrams as analogue signals via four analogue outputs, which can be used independently from one another as current or voltage outputs. With the analogue actuator module AAM/S, the number of analogue outputs can be increased to 8 outputs. The devices requires an external 24 V power supply for operation. Description MW Type Order code AA/S 4.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 4 AA/S 4.1 2CDG120005R0011 1 0.21 4 AAM/S 4.1 2CDG120006R0011 1 0.18 30 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Shutters and Sun Protection A A 7 Modern building installation enables a high degree of functionality and simultaneously complies with increased security requirements. Due to the structured installation of the electrical components, it is possible to carry out rapid planning, installation and setup as well as achieve cost benefits during operation. Modern sun protection devices have a significant role, as they must fulfil many demands: – – Anti-glare protection (e.g. PC workstations) –– Utilization of daylight by tracking the sun‘s position and directing available daylight –– Protecting furniture and carpets from fading –– Regulating the room temperature (overheating protection in summer; harvesting the available energy on cold days) – – Providing protection from people looking in from the outside – – Protection against intruders. With the new Blind/Roller Shutter Actuators JRA/S, the complex requirements on a sustainable and energy efficient automatic sun protection control can be implemented in offices, residential and functional buildings via ABB i-bus® KNX. The Blind/Roller Shutter Actuators are ideal for the control of drives in the area of sun protection: –– Blinds, exterior blinds, slat blinds and panel curtains – – Roller shutters, roller blinds, screens, vertical blinds – – Awnings, pleated blinds, pleated curtains, etc. Optimum room air quality via automatic ventilation The demands for the reduction of energy consumption often results in poor ventilation in today‘s heavily insulated buildings. The quality of the room air does not comply with the desired and required level. Natural ventilation is often an effective and efficient method for exchanging the “used” room air and improving the air quality in the room. If the air quality in the room is monitored with sensors (temperature, humidity, CO2 concentration), the ventilation flaps can be opened automatically and in good time ensuring that the air quality is kept in a comfortable range. Blind/Roller Shutter Actuators are ideal for control of ventilation elements such as – – Ventilation flaps – – Roof hatches, skylights – – Windows, doors and gates ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 31 ABB i-bus® KNX Shutters and Sun Protection – Innovations A 7 Automatic travel detection Travel times for the connected drives can be easily determined during operation with the automatic travel detection feature. It saves time during setup. Furthermore, compensation of age and weather-related length changes to blinds or roller shutters is assured. It facilitates precise positioning of the blinds/shutter when using sun position-dependent control. Copy and exchange This function allows parameter settings of an output to be copied or exchanged with other freely selectable outputs. This is possible within a device or in conjunction with several devices. Copy and exchange is useful particularly on projects, where all drives of a facade are controlled identically. It shortens the setup process and reduces the possible sources of error with parameterization. Diagnostics Enhanced diagnostic messages can be issued with the new Blind/Roller Shutter Actuators. They are particularly useful during setup or in the event of faults. It is possible, for example, to detect and signal if the power supply to a drive is interrupted. Integration in the room temperature control The intelligent and networked blind and roller shutter control plays an important role in the energy efficient usage of a building. The level of sunlight in the room and heating up due to the sun‘s energy can be controlled in conjunction with the room climate control. The new software function “overheat control” prevents unintentional overheating of a room. The blinds are closed in good time. The shutter control can be actively involved in the room temperature control – a requirement for implementing high-efficient buildings compliant to EN 15232. 32 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Shutters and Sun Protection A A 7 The following table provides an overview of technical data and software functions for the shutter actuator range: JRA/S X.230.5.1 General Number of outputs Nominal voltage Auxiliary voltage 230 V Type of installation Module width (space unit) Manual functions Disable/enable man. operation and status man. operation Operating modes Control with slat adjustment (blinds, etc.) Control without slat adjustment (roller shutters, awnings, etc.) Ventilation flaps, switch mode including stair case lighting function General device functions Automatic travel detection Time-delayed switching of drives Sending and switching delay time In operation function Request status values Extended setting options for drives and blind/shutter Direct functions UP/DOWN, STOP/Slat adjustment Position height/slat 0…255 Preset Move to position/Set position Enable limitation Trigger travel detection Trigger reference movement 8 bit scene Safety functions Wind, Rain, Frost alarm Block Forced operation (1-Bit and 2-Bit) Automatic functions Activation of automatic control Position height/slat on sun Presence Heating/Cooling Overheat control Enable/block automatic Enable/block direct control Status messages Status height/slat 0…255 Status upper/lower end position Status of operation Status automatic control Status information (2 byte) Status SMI Status of positions/limit position Status auxiliary voltage SMI diagnostic byte Sonstiges Extended settings for drives and blinds/shutters Total turning of slats after move down command Position of slat after arriving on lower end position Control and diagnosis via i-bus Tool STANDARD JRA/S JRA/S 4.24.5.1 X.230.2.1 SMI JRA/S X.230.1.1 SJR/S 4.24.2.1 JA/S 4.SMI.1M 4 x 4 SMI LoVo (broadcast) LoVo 24 V MDRC 4 4 x 4 SMI (broadcast) 230 V MDRC 4 X = 2, 4, 8 4 X = 2, 4, 8 X = 2, 4, 8 230 V AC – MDRC 2-fold: 4 4-fold: 4 8-fold: 8 24 V DC – MDRC 4 230 V AC – MDRC 2-fold: 4 4-fold: 4 8-fold: 8 230 V AC – MDRC 2-fold: 4 4-fold: 4 8-fold: 8 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 33 ABB i-bus® KNX Shutters and Sun Protection A 7 JRA/S 8.230.5.1 Blind/Roller Shutter Actuator with Travel Detection and Manual Operation, 230 V AC, MDRC For the control of independent 230 V AC drives via ABB i-bus® KNX. The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed. The travel times of the drive are detected automatically via current detection. To protect the drives, the output contacts are electromechanically locked against each other. Push buttons are located at the front of the device to control the outputs e.g. during commissioning. The current status of the output is displayed via LEDs. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. JRA/S 4.24.5.1 2-fold 4 JRA/S 2.230.5.1 2CDG110124R0011 1 0.21 4-fold 4 JRA/S 4.230.5.1 2CDG110125R0011 1 0.25 8-fold 8 JRA/S 8.230.5.1 2CDG110126R0011 1 0.46 Blind/Roller Shutter Actuator with Travel Detection and Manual Operation, 4-fold, 24 V DC, MDRC For the control of up to 4 independent 24 V DC drives via ABB i-bus® KNX. The device is designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed. The travel times of the drive are detected automatically via current detection. Push buttons are located at the front of the device to control the outputs e.g. during commissioning. The current status of the output is displayed via LEDs. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 4 JRA/S 2.230.2.1 kg JRA/S 4.24.5.1 2CDG110128R0011 1 kg 0.21 Blind/Roller Shutter Actuator with Manual Operation, 230 V AC, MDRC For the control of independent 230 V AC drives via ABB i-bus® KNX. The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed. To protect the drives, the output contacts are electromechanically locked against each other. Push buttons are located at the front of the device to control the outputs e.g. during commissioning. The current status of the output is displayed via LEDs. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg 2-fold 4 JRA/S 2.230.2.1 2CDG110120R0011 1 0.21 4-fold 4 JRA/S 4.230.2.1 2CDG110121R0011 1 0.25 8-fold 8 JRA/S 8.230.2.1 2CDG110122R0011 1 0.46 34 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Shutters and Sun Protection Blind/Roller Shutter Actuator, 230 V AC, MDRC For the control of independent 230 V AC drives via ABB i-bus® KNX. The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed. To protect the drives, the output contacts are electromechanically locked against each other. Description MW Type Order code JRA/S 2.230.1.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 2-fold 4 JRA/S 2.230.1.1 2CDG110129R0011 1 0.21 4-fold 4 JRA/S 4.230.1.1 2CDG110130R0011 1 0.25 8-fold 8 JRA/S 8.230.1.1 2CDG110131R0011 1 0.46 SMI Shutter Actuator with Manual Operation, 4-fold, MDRC It controls four independent groups (broadcast) with up to four SMI (Standard Motor Interface) drives (230 V) for positioning blinds, roller shutters, awnings and other shading products. Status signals (motor fault, direction of movement) can also be sent from the SMI drive on the bus. Push buttons are located at the front of the device to control the outputs e.g. during commissioning. The current status of the output is displayed via LEDs. Description MW Type Order code JA/S 4.SMI.1M Price Pack Weight 1 pc. unit 1 pc. E pc. 4 JA/S 4.SMI.1M 2CDG110028R0011 1 kg 0.25 SMI Blind/Roller Shutter Actuator, 4-fold, LoVo, MDRC It controls four independent groups (broadcast) with up to four SMI (Standard Motor Interface) LoVo drives for positioning blinds, roller shutters, awnings and other shading products. Status signals (motor fault, direction of movement) can also be sent from the SMI drive on the bus. Push buttons are located at the front of the device to control the outputs e.g. during commissioning. The current status of the output is displayed via LEDs. Description MW Type Order code SJR/S 4.24.2.1 Price Pack Weight 1 pc. unit 1 pc. E pc. 4 SJR/S4.24.2.1 2CDG110143R0011 1 kg 0.25 Shutter Control Unit, MDRC Controls shutter and blind actuators according to the position of the sun. The shutter control unit contains the functions of anti-glare protection and daylight redirection for up to 4 facades. Automatic shading can be implemented for every building and climatic control can be supported by the comprehensive range of parameter settings in the ETS. Description MW Type Order code JSB/S 1.1 Price Pack Weight 1 pc. unit 1 pc. E pc. 2 JSB/S 1.1 GHQ6310084R0111 1 kg 0.12 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 35 A A 7 DALI Gateway DGN/S 1.16.1 Lighting control and emergency lighting functions combined A 8 DALI DALI Gateway DGN/S 1.16.1 Flexible group assignment DALI self-contained emergency lighting KNX Manual light operation Operation/visualisation via touch display The new ABB i-bus® KNX DALI Gateway with emergency lighting function combines modern flexible lighting control in intelligent building control systems with DALI emergency lighting. Up to 64 DALI devices can be flexibly installed via 16 lighting groups and controlled and monitored by KNX. Control via 16 lighting groups Conventional lighting and individual emergency lighting battery combined Normal DALI lighting and DALI emergency lighting can be combined as required. Furthermore, the DALI gateway with emergency lighting function supports the DALI standard EN 62386-202 that specifies DALI emergency lighting with individual batteries. DALI Light Controller DLR/S 8.16.1M Energy through constant lighting control DALI 1 2 3 4 5 6 7 8 DALI Light Controlller DLR/S 8.16.1M Flexible group assignment Light Sensor KNX Manual light operation Operation/visualisation via touch display The new DALI Light Controller DLR/A 4.8.1.1 is a surface mounting device for switching and dimming of 8 independent lighting groups. A maximum of 64 DALI devices can be connected. The device can be used for 4 - fold constant lighting control in connection with 4 Light Sensors LF/U 2.1. Furthermore staircase lighting and master / slave functions are provided. Fault feedback messages, e.g. concerning ballast or lamp failures, can be programmed and activated via KNX. The compact surface-mounted housing allows the decentralized installation in the underfloor or in false ceilings – optimal for the use with Room Controller RC/A. Control via 16 lighting groups. Up to 8 lighting groups can be controlled with 8 light sensors. Master-slave, staircase light and Scene mode round off the functions. DALI Light Controller DLR/A 4.8.1.1 Decentralized Constant Lighting Control 36 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 DALI Gateway DG/S 1.16.1 Flexibility in a good light = flexible connection A A 8 DALI DALI Gateway DG/S 1.16.1 KNX Manual light operation Operation/visualisation via touch display Large lighting groups can be controlled via flexible DALI groups. 1 x 64 DALI devices in 16 lighting groups. Overlapping groups are possible. DALI Gateway DG/S 1.1 Individual lighting control = flexible KNX lighting groups DALI 1 2 DALI Gateway DG/S 1.1 KNX Manual light operation Operation/visualisation via touch display Lighting groups are formed in KNX. Individual lamps are indicated on the KNX. 1 x 64 DALI devices in unlimited lighting groups. DALI Gateway DG/S 8.1 The proven technology = fixed connection DALI DALI DALI 1 2 3 4 5 6 7 8 DALI Gateway DG/S 8.1 KNX Manual light operation Operation/visualisation via touch display Lighting groups are formed via “rigid” hardware wiring. Fast commissioning as no addressing is necessary. No readdressing when a ballast is exchanged. 8 x 16 DALI devices. ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 37 ABB i-bus® KNX Illumination and Light Sensors – DALI A 8 DG/S 8.1 DALI Gateway, 8-fold, MDRC For controlling up to 128 DALI devices. There are 8 separate, independent DALI outputs/channels available. Up to 16 DALI devices can be connected per channel. The DALI power supply is integrated in the gateway. The functions of switching, dimming, set values and fault indication for lamps and electronic ballasts are available for each output. It is possible to set the lamp burn-in time and 16 light scenes. Commissioning is simplified as no addressing or commissioning of the DALI devices is necessary. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6 DG/S 8.1 2CDG110025R0011 1 kg 0.31 DALI Gateway, 1-fold, MDRC The device is used to interface between DALI and KNX installations and incorporates the DALI power supply. Up to 2 x 64 DALI devices can be connected. 64 devices can be individually switched, dimmed and controlled with a brightness value. The second 64 devices operate in broadcast mode. The DALI functions such as scene control or fault indication can be programmed and activated via the KNX. DG/S 1.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 4 DG/S 1.1 2CDG110026R0011 1 kg 0.22 DALI Gateway, 1-fold, Group Control, MDRC The device is used to interface between DALI and KNX installations and incorporates the DALI power supply. Up to 16 DALI devices can be assigned to 16 lighting groups. Each group can be switched, dimmed and controlled with a brightness value. Scenes and sequencer functions are available for lighting effects. Fault feedback messages can be programmed and activated via KNX. DG/S 1.16.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 4 DGN/S 1.16.1 DG/S 1.16.1 2CDG110103R0011 1 kg 0.22 DALI-Gateway with Emergency Lighting Control, 1-fold, Group Control, MDRC For controlling DALI devices via the ABB i-bus®. Up to 64 DALI Slaves can be connected. Self contained emergency converter acc. EN 62386-202 will be supported. Control and status feedback is carried out via KNX with 16 lighting groups. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered. Feedback is sent. Slave-, staircase- and sequencer- function are integrated. For an individual change of the DALI address or group assignment a separate DGS-Software-Tool is available. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 4 DGN/S 1.16.1 2CDG110142R0011 38 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg 0.22 ABB i-bus® KNX Illumination and Light Sensors – DALI DALI Light Controller, 8-fold, MDRC For switching and dimming of 16 independent lighting groups. A maximum of 64 DALI devices can be connected. The device can be used for 8-fold constant lighting control in connection with eight Light Sensors LF/U 2.1. Fault feedback messages can be programmed and activated via KNX. With comfortable manual operation and status display. Description MW Type Order code DLR/S 8.16.1M Price Pack Weight 1 pc. unit 1 pc. E pc. 6 DLR/A 4.8.1.1 DLR/S 8.16.1M 2CDG110101R0011 1 kg 0.26 DALI Light Controller, 4-fold, SM Surface mounting device for switching and dimming of 16 independent groups of luminaries. Up to 64 DALI participants can be connected to one DALI control line. When combined with the light sensor LF/U 2.1 the device can be used as a 8-fold light controller for constant light control. Additionally a staircase and master/slave function is integrated. A great number of status feedback e.g. lamp and ballast fault can be transferred from DALI to KNX. With this functions the DALI light controller is a key factor in every energy efficient building automation. With his surface mounting housing it is possible to insert the device central in false ceiling or underfloor installation. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – DLR/A 4.8.1.1 2CDG110172R0011 1 kg 0.66 DALI Switch Actuator, 2-fold, 16 AX, C-load, MDRC Uses floating contacts (N.O.) to switch 2 independent electrical loads. The devices are especially suited for switching resistive, inductive or capacitive loads with high surge currents. The device features a DALI interface to IEC 60929. The control is implemented via the DALI control signal. Both channels operate as two independent DALI devices. Description MW Type Order code DSA/S 2.16.1 Price Pack Weight 1 pc. unit 1 pc. E pc. – DSA/S 2.16.1 2CDG110009R0011 1 kg 0.24 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 39 A A 8 ABB i-bus® KNX Illumination and Light Sensors A 8 Light Controller, 16 A, MDRC The device enables the switching and dimming of 2 or 4 independent lighting circuits in conjunction with electronic ballasts. In combination with the Light Sensor LF/U 2.1, the device can be used for constant lighting control. 2 or 4 light sensors can be connected to the controller for precise detection of the lighting conditions. Description MW Type Order code LR/S 4.16.1 Price Pack Weight 1 pc. unit 1 pc. E pc. LF/U 2.1 4 LR/S 2.16.1 2CDG110087R0011 1 0.25 4-fold 6 LR/S 4.16.1 2CDG110088R0011 1 0.40 Light Sensor, FM Used for implementing constant lighting control applications in conjunction with light controllers LR/S, LR/M, DLR/S 8.16.1M or DLR/A 4.8.1.1. The scope of delivery includes different optical rods, the connection terminals and the cover for discrete fitting in a room. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – SD/S x.16.1 kg 2-fold LF/U 2.1 2CDG110089R0011 1 kg 0.07 Switch/Dim Actuator, 16 A, MDRC Used for switching and dimming of 2, 4 or 8 independent groups of luminaries with electronic ballasts with 1 – 10 V control interfaces. On each channel the power supply of the ballasts is switched by a floating load relay (16 A – AC1). Every output can be operated manually and features display of the switching state. The device can assume a range of applications thanks to the programming options. The switching load is identical to the SA/S x.16.2.1 range (see capital 6). Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg 2-fold 4 SD/S 2.16.1 2CDG110079R0011 1 0.21 4-fold 6 SD/S 4.16.1 2CDG110080R0011 1 0.32 8-fold 8 SD/S 8.16.1 2CDG110081R0011 1 0.56 Universal Dim Actuator, 2-fold, 300 VA, MDRC For switching and dimming of incandescent lamps, 230 V halogen lamps or low-voltage halogen lamps which are powered by wound or electronic transformers (automatic load detection). Output power 2 x 300 VA or 1 x 500 VA up to 45 °C ambient temperature at a minimum load of just 2 W. Both outputs are independent of one another and can be supplied by different phases. Comprehensive application program with scene and time functions. Description MW Type Order code UD/S 2.300.2 Price Pack Weight 1 pc. unit 1 pc. E pc. 4 UD/S 2.300.2 2CDG110074R0011 40 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg 0.24 ABB i-bus® KNX Illumination and Light Sensors 6197/13-101-500 Universal Dim Actuator, MDRC Multi-channel universal dimming actuator for control of incandescent lamps, 230 V halogen lamps, lowvoltage halogen lamps with conventional or electronic transformers and dimmable energy-efficient lamps. Optimized for dimming of Philips retrofit LEDs (LEDi). Parallel connection of channels to increase load capacity via wire jumpers possible. Status/state indication of the outputs via LED. Local operation even without bus voltage or in non-programmed state possible. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. HS/S 4.2.1 kg 4-fold, 210 VA 8 6197/12-101-500 6197-0-0036 1 0.42 4-fold, 315 VA 8 6197/13-101-500 6197-0-0037 1 0.42 6-fold, 315 VA 12 6197/14-101-500 6197-0-0038 1 0.91 4-fold, 600 VA 12 6197/15-101-500 6197-0-0039 1 0.91 1-fold, 1.260 VA 12 6197/52-101-500 6197-0-0040 1 1-fold, 2.400 VA 12 6197/53-101-500 6197-0-0041 1 Interface for Outside Light Sensor, MDRC The device is used for the connection and evaluation of up to 3 Outside Light Sensors LFO/A 1.1. The Outside Light Sensors can be analysed individually or combined. Amongst others 10 logical switching channels for the evaluation of threshold values are provided. Threshold values can be adjusted directly on the device. The device can be used as a twilight switch (1 ... 100 lux) or as a light value switch (100 ... 20.000 lux). One Outside Light Sensor LFO/A 1.1 is supplied with the device. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – HS/S 4.2.1 2CDG120044R0011 1 kg 0.24 Outside Light Sensor Outside Light Sensor for the connection with the Interface HS/S 4.2.1. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. LFO/A 1.1 – LFO/A 1.1 2CDG120045R0011 kg 1 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 41 A A 8 ABB i-bus® KNX Illumination and Light Sensors A 8 6131/20-24-500 Busch-Presence detector mini KNX NEW 8 meter Detection range (for mounting height 2.5 m, 3 m and 4 m): circular. Seated persons Ø: 5 m, 6,5 m and 9 m. Walking persons Ø: 6,5 m, 8 m and 10,5 m. Visible height 16 mm. With 2 channels. Targeted for connection and disconnection of lights bands depending on the room brightness. Regulation in response to the movement possible. Using the device as presence and/or movement detectors. Detectors application with 2 power off stages. Detectors application with integrated monitoring function. Constant light switch with up to two independent channels. Constant light switch with max. 2 outputs for brightnessdependent switching of two light bands in the area. With integrated KNX bus coupler. Connections: KNX-line: Bus connection terminal. Brightness limit value: 1 Lux – 1000 Lux. Mounting height: 2 m – 4 m. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 80 mm x 80 mm x 45 mm. Mounting depth: 29 mm. Availibility December 2014 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6131/21-24-500 alpine white – 6131/20-24-500 6132-0-0342 1 aluminium silver – 6131/20-183-500 6132-0-0343 1 kg Busch-Presence detector mini premium KNX NEW 8 meter Detection range (for mounting height 2.5 m, 3 m and 4 m): circular. Seated persons Ø: 5 m, 6,5 m and 9 m. Walking persons Ø: 6,5 m, 8 m and 10,5 m. Visible height 16 mm. With 4 channels. For dimming/brightness of the rules to a defined value in a designated collection area. HVAC function for controlling heating and/or cooling systems and ventilation systems in the designated collection area. Detectors application with 2 power off stages. Detectors application with integrated monitoring function. Constant light controller with up to two independent channels. Constant light controller with max. 2 outputs for dimming daylight control/rules of two rooflights in the room. Integrated object room temperature controller. 10 freely programmable IR channels (white). Incl. 5 logic channels (logic gates, gates, delay and staircase lighting). Weighting of up to 2 external brightness values and the internal brightness sensor possible. With integrated KNX bus coupler. Connections: KNX-line: Bus connection terminal. Brightness limit value: 1 Lux – 1000 Lux. Mounting height: 2 m – 4 m. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 80 mm x 80 mm x 45 mm. Mounting depth: 29 mm. Availibility December 2014 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. alpine white – 6131/21-24-500 6132-0-0344 1 aluminium silver – 6131/21-183-500 6132-0-0345 1 42 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 kg ABB i-bus® KNX Illumination and Light Sensors 6131/30-24-500 Busch-Presence detector KNX NEW 12 meter Detection range (for mounting height 2.5 m, 3 m and 4 m): circular. Seated persons Ø: 8 m, 10 m and 14 m. Walking persons Ø: 10 m, 12 m and 16 m. Visible height 23 mm. With 2 channels. Targeted for connection and disconnection of lights bands depending on the room brightness. Regulation in response to the movement possible. Using the device as presence and/or movement detectors. Detectors application with 2 power off stages. Detectors application with integrated monitoring function. Constant light switch with up to two independent channels. Constant light switch with max. 2 outputs for brightnessdependent switching of two light bands in the area. With integrated KNX bus coupler. Connections: KNX-line: Bus connection terminal. Brightness limit value: 1 Lux – 1000 Lux. Mounting height: 2 m – 4 m. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 91 mm x 91 mm x 45 mm. Mounting depth: 22 mm. Availibility December 2014 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6131/31-24-500 alpine white – 6131/30-24-500 6132-0-0346 1 aluminium silver – 6131/30-183-500 6132-0-0347 1 kg Busch-Presence detector premium KNX NEW 12 meter Detection range (for mounting height 2.5 m, 3 m and 4 m): circular. Seated persons Ø: 8 m, 10 m and 14 m. Walking persons Ø: 10 m, 12 m and 16 m. Visible height 23 mm.With 4 channels. For dimming/brightness of the rules to a defined value in a designated collection area. HVAC function for controlling heating and/or cooling systems and ventilation systems in the designated collection area. Detectors application with 2 power off stages. Detectors application with integrated monitoring function. Constant light controller with up to two independent channels. Constant light controller with max. 2 outputs for dimming daylight control/rules of two rooflights in the room. Integrated object room temperature controller. 10 freely programmable IR channels (white). Incl. 5 logic channels (logic gates, gates, delay and staircase lighting). Weighting of up to 2 external brightness values and the internal brightness sensor possible. With integrated KNX bus coupler. Connections: KNX-line: Bus connection terminal. Brightness limit value: 1 Lux – 1000 Lux. Mounting height: 2 m – 4 m. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 91 mm x 91 mm x 45 mm. Mounting depth: 22 mm Availibility December 2014 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. alpine white – 6131/31-24-500 6132-0-0348 1 aluminium silver – 6131/31-183-500 6132-0-0349 1 kg ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 43 A 8 ABB i-bus® KNX Illumination and Light Sensors A 8 6131/40-24-500 Busch-Watchdog Sky KNX NEW 24 meter Detection range (for mounting height 6 m and 12 m): circular. Walking persons Ø: 18 m, 24 m. Visible height 23 mm. With 2 channels. Targeted for connection and disconnection of lights bands depending on the room brightness. Regulation in response to the movement possible. Use of the device as a movement detector. Detectors application with 2 power off stages. Detectors application with integrated monitoring function. Constant light switch with up to two independent channels. Constant light switch with max. 2 outputs for brightnessdependent switching of two light bands in the area. With integrated KNX bus coupler. The programming button can be activated with the IR transmitter 6010-25 (-500). Connections: KNX-line: Bus connection terminal. Brightness limit value: 1 Lux – 1000 Lux. Mounting height: 4 m – 12 m. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 91 mm x 91 mm x 45 mm. Mounting depth: 22 mm. Availibility December 2014 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. alpine white – 6131/40-24-500 6132-0-0350 kg 1 Surface-mounting box NEW For Busch-Presence detector mini KNX. For installing a Busch-Presence detector mini KNX 6131/20-xxx(-500) or a Busch-Presence detector mini premium KNX 6131/21-xxx(-500). Protection class (Device): IP 20. Dimensions: (L x W x D): 80 mm x 80 mm x 35 mm. Availibility December 2014 Description MW Type Order code 6131/29-24-500 Price Pack Weight 1 pc. unit 1 pc. E pc. alpine white – 6131/29-24-500 6132-0-0351 1 aluminium silver – 6131/29-183-500 6132-0-0352 1 kg Surface-mounting box NEW For Busch-Presence detector KNX and Busch-Watchdog Sky KNX. For installing a BuschPresence detector KNX 6131/30-xxx(-500) or a Busch-Presence detector premium KNX 6131/31-xxx(-500) or a Busch-Watchdog Sky KNX 6131/40-24(-500). Protection class (Device): IP 20. Dimensions: (L x W x D): 91 mm x 91 mm x 33 mm. Availibility December 2014 6131/39-24-500 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. alpine white – 6131/39-24-500 6132-0-0353 1 aluminium silver – 6131/39-183-500 6132-0-0354 1 44 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 kg ABB i-bus® KNX Illumination and Light Sensors 6131/10-24-500 Presence Detector, FM To be discontinued with intergrated bus coupling unit. Standard version for switching illumination in conjunction with brightness and movement. With two switching channels and two constant brightness switching channels (control of switch actuators via adjusted brightness level). Detection zone (installation height = 2,5 m) circular Detection zone (installation height = 2,5 m) circular Ø 8 m. Detection angle: 360°. Brightness limit value: 1 – 1000 Lux. Mounting height: 2,5 m recommended. Protection class (device): IP 20. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6131/11-24-500 alpine white – 6131/10-24-500 6132-0-0295 1 aluminium silver – 6131/10-183-500 6132-0-0297 1 kg 0.17 Presence Detector, DualLine, FM To be discontinued with intergrated bus coupling unit. DualLine version for switching illumination in conjunction with brightness and movement. With two switching channels and two channels for constant brightness control (control of dimactuators via adjusted brightness level). With two HVAC channels. With logic functions and IR receiver. Detection zone (installation height = 2,5 m) circular Detection zone (installation height = 2,5 m) circular Ø 8 m. Detection angle: 360°. Brightness limit value: 1 – 1000 Lux. Mounting height: 2,5 m recommended. Protection class (device): IP 20. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. alpine white – 6131/11-24-500 6132-0-0299 1 aluminium silver – 6131/11-183-500 6132-0-0301 1 kg 0.17 Surface Mounting Base for Presence Detector To be discontinued Surface mounting base for for installation of flush-mounted inserts in combination with presence detector 6131/10 and 6131/11. Description MW Type Order code 6885-500 Price Pack Weight 1 pc. unit 1 pc. E pc. alpine white – 6885-500 6899-0-0282 1 aluminium silver – 6885-183-500 6899-0-0297 1 kg 0.15 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 45 A 8 ABB i-bus® KNX Illumination and Light Sensors A 8 6179/01-204-500 Busch-Watchdog 220 MasterLINE KNX Sensor angle: 220° Range: approx. 16 m. With 2 movement channels. With 1 twilight channel with 3 switching thresholds. No remote control possible via IR remote control KNX. With integrated KNX bus coupler. No additional power supply necessary. Surveillance density: 92 sectors with 368 switching segments. Twilight sensor: approx. 1 – 1000 lux. Switch-off delay: approx. 10 sec to 1092 min. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6179/02-204-500 white – 6179/01-204-500 6132-0-0313 1 silver metallic – 6179/01-208-500 6132-0-0314 1 kg Busch-Watchdog 220 MasterLINE KNX premium Sensor angle: 220° Range: approx. 16 m. With 4 movement channels. With 1 twilight / brightness channel with 3 switching thresholds. With 1 temperature channel with three switching thresholds. With 7-channel IR remote control. Remote control possible via IR remote control KNX 6179 (included in scope of delivery). With integrated KNX bus coupler. No additional power supply necessary. Surveillance density: 92 sectors with 368 switching segments. Twilight sensor: approx. 1 –1000 lux; Brightness sensor: approx. 1 – 80 klux; Temperature sensor: approx. – 25 to + 55 °C; Switch-off delay: approx. 10 sec to 1092 min. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. white – 6179/02-204-500 6132-0-0317 1 silver metallic – 6179/02-208-500 6132-0-0318 1 kg IR Remote Control KNX For Busch-Watchdog 220 MasterLINE KNX premium. The functions can be freely assigned. With coded transmission signal. Power supply: lithium button cell battery. Type CR2025 (included in delivery). Battery life: typically 2 years. Rated voltage: 3 V, Protection class (Device): IP 40, Temperature range (Device): 0 °C – 45 °C, Dimensions: (L x W x D): 86 mm x 40 mm x 7 mm. Description MW Type Order code 6179-500 Price Pack Weight 1 pc. unit 1 pc. E pc. grey / anthracite – 6179-500 6132-0-0320 46 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg ABB i-bus® KNX Heating and Cooling – Influencing Variables on Room Climate A 9 Influencing Variables on Room Temperature Influencing Variables on Air Quality Internal and external factors have an effect on the thermal conditions in a room or a building. As an external factor the solar radiation is important for the indoor temperature – particularly with regard to modern architecture with glass fronts. Besides this, the room temperature is strongly affected by the exchange of thermal energy through windows and walls as well as the loss of thermal energy through open doors and windows. The indoor climate in living and working areas has a scientifically proven impact on health, job performance and well-being of people. A suitable indicator for determination of the room air quality is the CO2 concentration. In addition the values for room temperature and air humidity must be controlled to meet the requirements for a comfortable room climate. Depending on the intensity, all this interactions influence also the energy efficiency of a building and have therefore to be optimised. Internal thermal inputs from lighting, devices or persons have also an influence on the room climate. By planning a heating, ventilation or air conditioning system all this internal and external factors have to be considered. Studies have shown, that high CO2 concentration in the air influences the well-being as well as the performance and learning ability of people. Besides the normal CO2 concentration in the air, human respiration is an important factor increasing the CO2 concentration in a room. Therefore it is important to measure the CO2 concentration in rooms where many persons are present (schools, conference rooms, open-plan offices). Monitoring of thresholds enables fans to be switched via ABB i-bus KNX allowing automatic control of the CO 2 concentration and sufficient supply of fresh air. Exchange of thermal energy through windows and walls Loss of thermal energy through open doors CO2 Thermal input from sun, lighting, persons and devices ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 47 ABB i-bus® KNX Heating and Cooling – Room Thermostat FanCoil A 9 Living and working with a feeling of well-being. And here the air in the room is one of the most important factors. Because the body takes an ideal temperature for granted and therefore easily reacts to changes. Heated or air-conditioned rooms can be optimally adjusted – to a consistently pleasant ambience. The KNX Fan Coil room temperature controller for stand-alone applications. The Fan Coil room temperature controller with display is a room temperature controller for ventilator convectors or conventional systems for heating and cooling. This option offers complete air-conditioning for rooms. The temperature can be adjusted precisely for personal comfort. The fan speeds can be selected by push buttons. Even very large rooms can be heated or cooled to a comfortable temperature quickly – with additional air-conditioning units. The KNX Fan Coil room temperature controller can be operated individually. The bus coupler is integrated into the control element. Function – Temperature sensor – RTC setting – Illuminated display – Fan Coil operation for heating and cooling Features – Very easy to operate with large, clear display – Complete air conditioning – Fan speeds can be manually selected – Integrated bus coupler – Surface-mounted, independent switching program – Colours: studio white, aluminium silver 48 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Heating and Cooling Electronic Switch Actuator, 4-fold, 1 A, MDRC Controls thermoelectric valve drives (e.g. TSA/K) in heating and cooling systems. Each output (24...230 V AC/DC) is protected against short-circuit and overload. With manual operation and status display for each output. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. ES/S 4.1.2.1 kg 4-fold 4 ES/S 4.1.2.1 2CDG110058R0011 1 0.25 8-fold 8 ES/S 8.1.2.1 2CDG110059R0011 1 0.38 Electronic Relay, 1-fold, FM The device combination with the Universal Interface US/U and a room thermostat noiselessly controls the heating system and chilled ceiling temperature via thermo-electric valve drives e.g. TSA/K, 24 V…230 V AC/DC). Description MW Type Order code ER/U 1.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg – ER/U 1.1 GHQ6310044R0111 1 0.08 2-fold – US/U 2.2 GHQ6310074R0111 1 0.06 4-fold – US/U 4.2 GHQ6310070R0111 1 0.06 Valve Drive Actuator, 230 V, MDRC Controls thermoelectric valve drives (e.g. TSA/K) in heating or cooling systems. Each three outputs are protected against short-circuit and overload. With manual operation and status display. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. VAA/S 6.230.2.1 VAA/A 6.24.1 kg 6-fold 4 VAA/S 6.230.2.1 2CDG110116R0011 1 0.17 12-fold 8 VAA/S 12.230.2.1 2CDG110117R0011 1 0.3 Valve Drive Actuator, 6-fold, 24 V, SM In conjunction with the thermostat it controls up to 13 thermoelectric valve drives (24 V), max. 4 per channel. The device is suitable for the installation in heating circuit distribution systems where the application of a triac ensures noiseless switching of the drives. Mains plug on the transformer (230 V) for ease of installation. Description MW – Type VAA/A 6.24.1 Order code 2CDG120032R0011 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 1 1.8 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 49 A 9 ABB i-bus® KNX Heating and Cooling A 9 FCL/S 1.6.1.1 Blower Actuator, 6 A, MDRC NEW to control blowers or fans with up to three fan speeds via step or changeover control. The FCL/S 1.6.1.1 have one fan output and one additional floating switch output. The FCL/S 2.6.1.1 feature two fan outputs plus two floating switch outputs. Alternatively the second fan output can be used as three switch outputs. The fan speed can be directly choosen, increased and decreased as well as controlled by the control value of a closed-loop controller. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg 1-fold 4 FCL/S 1.6.1.1 2CDG110163R0011 1 0.18 2-fold 6 FCL/S 2.6.1.1 2CDG110164R0011 1 0.26 FCL/S 2.6.1.1 Room Thermostat Fan Coil with Display, SM Sends control values for the room to the Fan Coil Actuators or devices with the respective outputs (e.g. Room Master). The intuitive control operation allows each user to individually set the room temperature and the fan speed. The large LC display can display the actual and target temperatures, the current operating mode as well as the fan speeds. With integrated Bus Coupler. Description MW Type Order code 6138/11-84-500 Price Pack Weight 1 pc. unit 1 pc. E pc. FCA/S 1.1M kg alpine white – 6138/11-84-500 6138-0-0003 1 0.092 aluminium silver – 6138/11-83-500 6138-0-0005 1 0.092 Fan Coil Actuator, MDRC For the control of typical blower convectors via two electronic outputs for thermoelectric or motor-driven valve drives (FCA/S 1.1M) or via two analogue outputs for 0...10 V valve drives (FCA/S 1.2.2.1). Furthermore 3 outputs for individual fan speeds are provided. An additional load output switches an additional load (up to 16 A), such as auxiliary heating. A window contact and a condensed water signal can be read via two binary inputs and transferred on the KNX. The easy to understand manual operation enables quick commissioning. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. For thermoelectric or kg 4 FCA/S 1.1M 2CDG110084R0011 1 0.12 6 FCA/S 1.2.2.1 2CDG110141R0011 1 0.16 motor-driven valve drives For 0...10 V valve drives 50 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Heating and Cooling Fan Coil Controller, MDRC It controls motor-driven and thermoelectric valve drives as well as multi-speed fans. Control without further additional components can be undertaken in combination with the optional Temperature Sensor TS/K. There are two binary inputs available for 24 V AC signal contacts for window contact or dew point signals. A 230 V power supply is required. Description MW Type Order code FC/S 1.1 LGS/A 1.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 6 FC/S 1.1 2CDG120001R0011 1 0.5 Temperature Sensor for FC/S 1.1 – TS/K 1.1 2CDG120002R0011 1 0.055 Air Quality Sensor, SM Accurately measures the CO2 concentration, humidity and temperature in a room. Three independent thresholds can be set for the CO2 concentration and the relative humidity in addition to a threshold for the temperature. Exceeding or underrunning the thresholds can trigger a response. Disable object for every threshold. Measured variables can be transmitted directly on the bus. Communication object “Ventilation” is used for RPM control or as a position indicatior for the ventilation flaps. Maintenance free sensor. The sensor is powered via the bus. With integrated Bus Coupler. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – LGS/A 1.1 2CDG120038R0011 1 kg 0.136 Electromotor Valve Drive The drive is a proportional valve drive for controlling heating valves and is mounted on thermostat valve bases. Valve Adapters VA10, VA78 for conventional valves are supplied. The control is carried out via a continuous KNX room thermostat. The actual valve position is indicated by 5 LEDs. The valve drive has two binary inputs for a presence contact and/or window contact and for further signal indication. Description MW Type Order code ST/K 1.1 Price Pack Weight 1 pc. unit 1 pc. E pc. – ST/K 1.1 2CDG120004R0011 1 kg 0.32 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 51 A 9 ABB i-bus® KNX Heating and Cooling A 9 Thermoelectric Valve Drives For opening and closing valves in heating, ventilation and air-conditioning systems. Both variants (230 V and 24 V) feature a plug-in connection cable (1 m) and a splash-proof housing. The mounting on the valve is easily implemented using the Valve Adapter VA/Z xx.1. Description MW Type Order code TSA/K 230.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 230 V – TSA/K 230.1 2CDG120007R0011 1 0.16 24 V – – TSA/K 24.1 VA/Z 10.1 2CDG120008R0011 2CDG120009R0011 1 1 0.16 0.06 – VA/Z 50.1 2CDG120010R0011 1 0.05 – VA/Z 78.1 2CDG120011R0011 1 0.03 – VA/Z 80.1 2CDG120012R0011 1 0.06 Valve Adapter for valves from Dumser, Chronatherm, Vescal, KaMo Valve Adapter for valves from Honeywell, Reich, Cazzaniga, Landis & Gyr. MNG Valve Adapter for valves from Danfoss RA Valve Adapter for valves from Heimeier, Herb, Onda, Schlösser (ab 93), Oventrop 52 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Control, Logic and Time Logic Module, MDRC Used to solve a varied range of project-specific control tasks and can implement 3 functions simultaneously. The following functions are available for selection: logic gate, filter, time delay, multiplier, min/max value detector, temperature comparator, toggle values, threshold detection, format converter, scenes, increment/decrement values, staircase lighting. Description MW Type Order code LM/S 1.1 2 LM/S 1.1 GHQ6310080R0111 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 1 0.1 Application Unit, Logic, MDRC Allows the compilation of complex logical functions by simply combining different logic elements and gates using a graphical user interface as an ETS plug-in and does not require additional software. 50 logical elements, 50 gates, 30 timer modules and 10 comparators are available. Description MW Type Order code ABL/S 2.1 Weight 1 pc. unit 1 pc. E pc. 2 ABZ/S 2.1 Price Pack ABL/S 2.1 2CDG110073R0011 1 kg 0.12 Application Unit, Time, MDRC It provides a yearly time clock program with 15 daily routines (800 switching events), a weekly schedule and allowance for 100 special days. Additionally, the unit can control up to 300 participants in 30 macro groups, that can be triggered using a single command. In this way, each time controlled switching event can cause a series of actions. The switching times can be modified with the free PZM software without using ETS. PZM Software and additional information on www.abb.com/knx. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 2 ABZ/S 2.1 2CDG110072R0011 1 kg 0.12 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 53 A 10 ABB i-bus® KNX Control, Logic and Time A 10 FW/S 8.2.1 Radio Time Switch , 8-channel, MDRC The Radio Time Switch sends current time and date on the bus. The time can be optionally received via a DCF or GPS antenna. Furthermore the device can be used to easily adjust the time programs. The device provides 8 channels. Every channel supplies an independent daily, time and/or yearly program. Additionally, special programs (e.g. for vacation or public holiday days) are possible. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 3 FW/S 8.2.1 2CDG120039R0011 1 kg 0.33 DCF Antenna for Radio Time Switch For the connection to the Radio Tme Switch FW/S 8.2.1. The time signal from the DCF 77 transmitter can be received within a radius of approx. 1000 km around Frankfurt. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. FAD/A 1.1 – FAD/A 1.1 2CDG120040R0011 1 kg 0.17 GPS Antenna for Radio Time Switch For the connection to the Radio Time Switch FW/S 8.2.1. The device receives time and date via GPS signal which is available worldwide. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. FAG/A 1.1 – FAG/A 1.1 2CDG120041R0011 1 kg 0.21 Programming Set OBELISK top2 for Radio Time Switch The programming set contains a CD ROM with the Obelisk top2 for the creation of switching programs for the Radio Time Switch FW/S 8.2.1, a memory card PK/E 2.1 for transferring switching programs to the Radio Time Switch and a USB programming adapter for the memory card. PS/E 2.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – PS/E 2.1 2CDG120042R0011 1 kg 0.20 Memory Card OBELISK top2 The memory card can be used for transferring switching programs to Radio Time Switch. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. PK/E 2.1 – PK/E 2.1 2CDG120043R0011 54 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg 0.02 ABB i-bus® KNX Visualisation, Display and Signalling TG/S 3.2 Telephone Gateway, Analogue, MDRC It sends configurable voice messages via the telephone network to up to 10 users. 100 objects are available in the ETS program as inputs and outputs. As well as voice messages, emails or SMS messages can be sent. If the device is called, states can be polled and commands executed. The device has an integrated web server which enables simple operation and parametrisation using a conventional browser. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. Accessory Set contains a 8 – TG/S 3.2 TG/Z 1.1 2CDG110135R0011 2CDG110119R0011 1 1 kg 0.3 0.055 crossover cable (RJ45), a telephone cable (RJ11) and a TAE adapter for the telephone cable. Universal I/O Concentrator, 32-fold, MDRC Used to connect push buttons or signal lamps, e.g. to an operating/display tableau. It has 32 channels which can be freely parameterised as inputs/outputs using the ETS software. The device requires an external 12 or 24 V DC auxiliary power supply, (e. g. NT/S 24.800). Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. UK/S 32.2 4 UK/S 32.2 2CDG110071R0011 1 kg 0.18 Control and Display Tableau, LCD For indication of switching status, fault reports and measurement values. Using the robust push buttons, electrical consumers can be manually switched, values can be set in addition to timer programs and light scenes. The alarms can also issue an acoustic warning. The FM wall box simplifies mounting. MT 701.2, WS with T-RAHM, WS Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg white – MT 701.2, WS GHQ6050059R0005 1 1.16 silver – MT 701.2, SR GHQ6050059R0006 1 1.24 Coverframe, white – T-RAHM, WS GHQ6050059R0011 1 0.16 Coverframe, silver – T-RAHM, SR GHQ6050059R0012 1 0.17 Wall box – UP-KAST 2 GHQ6050059R0014 1 0.44 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 55 A 11 ABB i-bus® KNX Visualisation, Display and Signalling – Busch-ComfortTouch® A 11 The Busch-ComfortTouch® offers not only an extremely versatile range of switching and control functions for KNX systems, but also satisfies the highest design requirements. Its unique colour coding concept makes for particularly easy operation. Busch-ComfortTouch® unites the functions of a home control system, an information and entertainment centre with the highest design requirements. You can use Busch-ComfortTouch® to switch lamps on and off, dim them, control blinds, room temperature or select scenes comprising a combination of the above-named functions – even via remote control. There is also an integrated audio and video player. These functions are not only of interest for private households – the system is often used in doctor’s surgeries, offices, restaurants or stores to provide attrac- tive lighting, soft background music or comfortable room climates. A presence simulation function and alarm message display provide added security. It is also possible to display images from surveillance cameras. The system can be connected to the Internet, enabling you to call up e-mails, the latest stock market news, the weather forecast or traffic information. Operation is simple and easy via touch screen. A menu created individually for the user with clearly assigned buttons and a unique colour coding concept allow simple and intuitive operation. 01 Simplicity and user-friendliness are always the top priorities for operation. Busch-Jaeger has developed a unique colour coding concept for the user interface of its intelligent home control system. Each comfort area is assigned a specific colour. Yellow stands for lighting, blue for the blind control unit, magenta for light scenes and orange for the heating control unit. These colours are also used in the menus on the display. 01 Busch-ComfortTouch® 12.1 Glass black 02 Busch-ComfortTouch® 9 Glass black 03Busch-ComfortTouch® 9 White glass 02 03 04 04Busch-ComfortTouch® 12.1 Glass black 05Busch-ComfortTouch® 12.1 White glass 56 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 05 ABB i-bus® KNX Visualisation, Display and Signalling – Busch-ComfortTouch® A 11 The system is controlled via the Busch-ComfortTouch® – it couldn’t be easier. Buttons with text and symbols allow intuitive operation. Just a touch of the finger, and you can call up the MP3-player and play individual titles or playlists. And the volume is regulated via the panel, too. The ideal solution, not only for homes – the system is, for example, popular in restaurants. No more CDs lying around, no more finding space for a conventional hifi centre. The system can also be used to call up light scenes for various situations, from a cosy dinner at home to night-time light- ing for store windows, at the press of a button or via a time-controlled function. Another useful feature is the handy memo field allowing you to write text by hand - use it, for example to write a shopping list or for leaving messages for others. Colour pictures from surveillance cameras on stairways or outside the building can be called up on the display, offering added security. This allows you to keep an eye on the building at all times – handy, for example, for checking the surrounding area before opening the door for customers in the morning or when the doorbell rings. Media player Video surveillance Door communication Control of household appliance Dashboard Remote control by tablets (APP) Busch-ComfortTouch® controllable via app ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 57 ABB i-bus® KNX Visualisation, Display and Signalling A 11 8136/09-811-500 Busch-ComfortTouch® 9" Free programmable IP/KNX touch display can be used as a control, infotainment and entertainment centre for the whole house With a closed capacitative glass surface and a design strip made of stainless steel (brushed). With integrated camera and proximity sensor. Easy control using intuitive navigation concept. House control: switching, dimming, blinds, RTR, scene/sequences, timed controls Entertainment: Multimedia, remote control RC5 and B&O. Infotainment: IP telephony, RSS reader, intercom with picture, e-mail, voice and graphic memo, consumption data monitoring. Door communication: Indoor station for the ABB-Welcome system in combination with IP gateway 83341. Safety: video surveillance with IP cameras, alarm function, message function, presence simulation. Representation from individual floor plans, room images and operation pages. 23 cm (9“) Touch-display with 800 x 480 pixel Compatible with ABB i-bus® KNX Maintenance via remote control over IP. Control with smartphones and tablets via the ComfortTouch App (Apple iOS /Google Android from Version 4). Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 8136/12-811-500 white glass – 8136/09-811-500 8136-0-0024 1 black – 8136/09-825-500 8136-0-0026 1 kg Busch-ComfortTouch® 12.1" Free programmable IP/KNX touch display can be used as a control, infotainment and entertainment centre for the whole house With a closed capacitative glass surface and a design strip made of stainless steel (brushed). With integrated camera and proximity sensor. Easy control using intuitive navigation concept. House control: switching, dimming, blinds, RTR, scene/sequences, timed controls Entertainment: Multimedia, remote control RC5 and B&O. Infotainment: IP telephony, RSS reader, intercom with picture, e-mail, voice and graphic memo, consumption data monitoring. Door communication: Indoor station for the ABB-Welcome system in combination with IP gateway 83341. Safety: video surveillance with IP cameras, alarm function, message function, presence simulation. Representation from individual floor plans, room images and operation pages. 31 cm (12.1“) touchdisplay with 1280 x 800 pixel. Compatible with ABB i-bus® KNX Maintenance via remote control over IP. Control with smartphones and tablets via the ComfortTouch App (Apple iOS /Google Android from Version 4). Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. white glass – 8136/12-811-500 8136-0-0028 1 black – 8136/12-825-500 8136-0-0030 1 kg Power adapter module ABB i-bus® KNX Power adapter for the power supply of Comfort-Touch 8136/09-… and 8136/12-…. With integrated KNX bus coupler for the establishment of the local bus connection to the ABB i-bus® KNX. With integrated audio outputs (LineOut). Rated voltage: 110 V~ – 230 V~, +10% / –10%. Rated frequency: 50 Hz – 60 Hz. Description MW Type Order code 6186/01 UP-500 Price Pack Weight 1 pc. unit 1 pc. E pc. – 6186/01 UP-500 6186-0-0023 58 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg ABB i-bus® KNX Visualisation, Display and Signalling A 11 Flush-mounted installation box For flush-mounted und hollow-wall installation of the Busch-ComfortTouch® 8136/09-..., 8136/12-... or the SMARTtouch. Windproof. Description MW Type Order code Weight 1 pc. unit 1 pc. E pc. 8136/01 UP-500 – 6136/100 C-102-500 Price Pack 8136/01 UP-500 8136-0-0032 kg 1 Controlpanel SMARTtouch The SMARTtouch (210 functions) offers a colour touch display. The panels clearly display switch states, error messages and measured values, and allow comfortable operation and setting of timing programs and light scenes. Acoustic warnings or alarm functions can be programmed. The integrated room thermostat can be integrated into room climate control. Commissioning is via the bus or multimedia card/SD card. For flush mounting in walls and hollow panels the wall box 6136/UP can be used. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. SMARTtouch, colour – 6136/100 C-102-500 6136-0-0185 1 – 6136/100 CB-102 6136-0-0186 1 kg (210 functions) Bang & Olufsen, colour (210 functions) Design Frame for SMARTtouch Design frame made of real metal for 6136/100C xxx, 6136/100CB xxx, 6936/100C xxx, 6936/100CB xxx. Real metals: Dark glass with flap in chrome, dark glass with flap in aluminium, white glass satin finish with flap in aluminium. Dimensions (H x W x D): 184.6 mm x 218 mm x 9 mm. 6136/15-500 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. Dark glass with flap – 6136/10-500 6136-0-0139 1 – 6136/11-500 6136-0-0141 1 – 6136/15-500 6136-0-0196 1 kg in chrome Dark glass with flap in aluminium White glass, satin finish with flap in aluminium Flush Mounted Wall Box for Busch-Controlpanel To be discontinued For flush mounting and hollow panel mounting of the Room and Control Panels. Dimensions (H x W x D): 163.5 mm x 199 mm x 60 mm. Mounting depth: 60 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6136/UP – 6136/UP 6136-0-0124 kg 1 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 59 ABB i-bus® KNX Operation – Unique diversity of the range A 12 01 02 03 04 05 06 60 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Unique diversity of the range A 12 07 08 09 10 11 01 ca r a t® 07 Zenit for VDE markets 02 pure stainless steel 08 Zenit for NEMA markets 03 so l o® 09 Busch-triton® 04 Busch-axcent 10 Busch-priOn® ® 05 f u t u re® linear 11 B us Coupling Unit – for all the 06 Millenium* conventional series of Busch-Jaeger** *Millenium and Zenit series are only available in selected markets. **Busch Jaeger switch ranges only available for selected markets. For further information please contact your local ABB office. ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 61 ABB i-bus® KNX Operation – Functional Overview A 12 Program Standard control elements, bus coupler included with package Multifunction control elements, suitable for KNX bus coupler 6125/01 1gang 6126/01 2gang 6127/01 4gang 6125/02 1/2gang 6126/02 2/4gang 6127/02 4/8gang 6129/01 3/6gang with IR 6124/01 RTC 6128/01 2/4gang with RTC Switching, rocker switch total ● ● ● – ● Switching, rocker switch left/right – ● ● – ● Dimming, rocker switch total ● ● ● – ● Dimming, switch rocker left/right – ● ● – ● Blind switch rocker total ● ● ● – ● Venetian blind switch rocker total left/right – ● ● – ● Short-long operation, switch rocker left/right – ● ● – ● Value sender rocker switch total ● ● ● – ● Value sender switch rocker left/right – ● ● – ● Value dimming sensor, switch rocker total – ● ● – ● Red/green LED status illumination (red/green/off) Two LEDs per switch rocker – – – – RGB LED function illumination + status illumination – Two LEDs per switch rocker Two LEDs per switch rocker Two LEDs per switch rocker Two LEDs per switch rocker Setting the RTC operating mode – ● ● – ● Value sender, 2 objects, switch rocker left/right ● ● ● – ● Light scene extension unit with light scene memory function ● ● ● – ● Level switch, switch rocker total – ● ● – ● Level switch, switch rocker total left/right – ● ● – ● Multiple operation, rocker switch left/right – ● ● – ● IR remote control channels (up to 5 channels) – – ● – – Temperature reading – – – ● ● RTC settings – – – ● ● Illuminated display – – – ● ● Fan Coil operation for heating and cooling – – – ● ● Logic function (including light scenes) – ● ● ● ● Busch-Watchdog 4 channels – – – – – KNX function Room temperature controller only Design series Reflex SI – – – – – Busch Duro 2000® SI – – – – – future®linear ● ● ● ● ● alpha exclusive / nea – – – – – Busch-axcent® ● ● ● ● ● solo® ● ● ● ● ● impuls – – – – – pure stainless steel ● ● ● ● ● carat® ● ● ● ● ● ocean® – – – – – All Weather 44® – – – – – Busch-priOn® – – – – – Busch-triton® – – – – – 62 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Functional Overview 6120/12-101 and 6120/13 FM push-button coupling unit with integrated bus coupler FM room temperature controller, comercial 6122/01 Standard 6122/02 Comfort 6108/01 1/2gang 6108/02 2/4gang 6108/04 1/2gang 6108/05 2/4gang 6108/03 RTC – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – 1 LED – 1 LED – – – – – – – – – – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – ● ● ● ● – – – – – – – – – – – – – – – – – – – – – ● – – – – – – ● – – – – – – – – – – – – – ● ● ● – – – – ● ● ● – – – – – – – ● ● – – ● – – ● ● – – ● ● ● ● ● – – ● – – ● ● – – ● ● ● ● ● – – ● ● ● ● ● – – ● – – – – – – – ● ● ● ● – – ● ● ● ● ● – – ● – – – – ● ● – – – – – – – – – – – – – – – – – – – – – – ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 63 A 12 ABB i-bus® KNX Operation – Functional Overview A 12 Program Busch-triton® (next generation) Monoblock 6320/10 1/2gang 6320/38 3/6gang with RTC 6320/30 3/6gang 6320/58 5/10gang with RTC Busch-priOn® suitable for KNX bus coupler 6340-xx-101 1/2gang 6341-xx-101 rotarycontrol element 6320/50 5/10gang KNX function Switching, rocker switch total ● ● ● – Switching, rocker switch left/right ● ● ● ● Dimming, rocker switch total ● ● ● – Dimming, rocker switch left/right ● ● ● – Blind switch rocker total ● ● ● – Blind switch rocker total left/right ● ● ● ● Short-long operation, switch rocker left/right ● ● ● – Value sender rocker switch total ● ● ● – Value sender switch rocker left/right ● ● ● – Value dimming sensor, switch rocker total ● ● ● ● Red/green LED status illumination (red/green/off) 1 LED per switch rocker 1 LED per switch rocker – – RGB LED function illumination + status illumination – – 1 LED per switch rocker 1 LED per button Setting the RTC operating mode ● ● ● – Value sender, 2 objects, rocker switch left/right ● ● ● – Light scene extension unit with light scene memory function ● ● ● – Level switch, switch rocker total ● ● ● – Level switch, switch rocker total left/right ● ● ● – Multiple operation, rocker switch left/right - – ● – IR remote control channels (up to 13 channels) ● ● – – Light scene unit (8 scenes for up to 8 actuators) ● ● – – Light scene unit (10 scenes for up to 10 actuators) - – – – Programmable shift key ● ● – – Proximity function – – – – Temperature reading – ● – – RTC settings – ● – – Illuminated display – ● – – Fan Coil operation for heating and cooling – ● – – Media box/CD/DVD/Radio – – – – Short-time timer – – – – Weekly timer – – – – Alarm clock – – – – Messages – – – – Screen saver – – – – Display text/value – – – – Device lock – – – – Logic function (including light scenes) – – ● ● Busch-Watchdog 4 channels – – – – Room temperature controller only 64 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Functional Overview 6120/12-101 or 6120/13 (depending on the specific combination) A 12 6342-xx-101 3/6gang 6344-xx-101 8.89 cm (3.5") TFT colour display with rotary control element 6344-xx-101 6351-825-101 end strip top with information display, room temperature controller, IR receiver and proximity sensor + 6342xx-101 3/6gang 6350-825-101 end strip top with IR receiver and proximity sensor 6352-xx-101 end strip bottom with temperature sensor ● – – ● – – ● ● – ● – – ● – – ● – – ● ● – ● – – ● – – ● – – ● ● – ● – – ● – – ● – – ● – – ● – – ● ● – ● – – ● ● – ● – – – – – – – – 1 LED per switch rocker – – 1 LED per switch rocker – – ● ● – ● – – ● – – ● – – ● ● – ● – – ● – – ● – – ● – – ● – – ● – – ● – – – – – ● ● – – – – – – – – ● – – – – – – – – – – – – – ● ● – – – – – – ● – ● – ● – – – ● – ● – – – ● – ● – – – ● – – – – – ● – – – – – ● – – – – – ● – – – – – ● – – – – – ● – – – – – ● – ● – – – ● – – – – ● ● ● ● – – – – ● – – – ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 65 ABB i-bus® KNX Operation – Functional Overview A 12 Program Millenium 6125/20-500 6126/20-500 6129/20-500 6129/21-500 1/2gang 2/4gang 3/6gang 3/6gang with IR 6122/20-500 6124/20-500 Switching, button pair ● ● ● Switching, button upper/lower ● ● ● ● – – ● – Dimming, button pair ● ● – ● ● – Dimming, button upper/lower ● – ● ● ● – Blind, button pair – ● ● ● ● – – Blind, button upper/lower ● ● ● ● – – Short-long operation,button upper/lower ● ● ● ● – – Value transmitter, button pair ● ● ● ● – – Value transmitter, button upper/lower ● ● ● ● – – Value dimming sensor, button pair ● ● ● ● – – Value dimming sensor, upper/lower ● ● ● ● – – RGB LED function illumination + status illumination ● ● ● ● – – Setting the RTC operating mode ● ● ● ● – – Value transmitter, 2 objects, button upper/lower ● ● ● ● – – Light scene extension unit with light scene memory function ● ● ● ● – – Step switch, button pair ● ● ● ● – – Step switch, button upper/lower ● ● ● ● – – Multiple operation, botton upper/lower ● ● ● ● – – IR remote control channels (up to 5 channels) – – – ● – – Temperature reading - - - - – ● RTC settings - - - - – ● Illuminated display - - - - – ● Fan Coil operation for heating and cooling - - - - – ● 10 logic channels (incl. light scene, actuator, sequence actuator, logic gates, etc.) ● ● ● ● – ● Busch-Watchdog 4 channels – – – – ● – KNX function Room temperature controller only 66 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Functional Overview Program Zenit (VDE and NEMA) A 12 6125/98-509 6126/98-509 6129/96-509 6129/98-509 1/2gang 2/4gang 3/6gang 3/6gang with IR 6122/98-509 6124/98-509 Switching, button pair ● ● ● Switching, button upper/lower ● ● ● ● – – ● – Dimming, button pair ● ● – ● ● – Dimming, button upper/lower ● – ● ● ● – Blind, button pair – ● ● ● ● – – Blind, button upper/lower ● ● ● ● – – Short-long operation,button upper/lower ● ● ● ● – – Value transmitter, button pair ● ● ● ● – – Value transmitter, button upper/lower ● ● ● ● – – Value dimming sensor, button pair ● ● ● ● – – Value dimming sensor, upper/lower ● ● ● ● – – RGB LED function illumination + status illumination ● ● ● ● – – Setting the RTC operating mode ● ● ● ● – – Value transmitter, 2 objects, button upper/lower ● ● ● ● – – Light scene extension unit with light scene memory function ● ● ● ● – – Step switch, button pair ● ● ● ● – – Step switch, button upper/lower ● ● ● ● – – Multiple operation, botton upper/lower ● ● ● ● – – IR remote control channels (up to 5 channels) – – – ● – – Temperature reading - - - - – ● RTC settings - - - - – ● Illuminated display - - - - – ● Fan Coil operation for heating and cooling - - - - – ● 10 logic channels (incl. light scene, actuator, sequence actuator, logic gates, etc.) ● ● ● ● – ● Busch-Watchdog 4 channels – – – – ● – KNX function Room temperature controller only ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 67 ABB i-bus® KNX Operation – Busch-priOn® A 12 Busch-priOn® allows you to control and monitor functions for the entire room. Light, scenes, timer, blind control unit, heating control unit – all functions are controlled simply and intuitively via a rotary dial, and freely programmable functions can be called up via the rocker switches. Busch-priOn® is a non-fixed, modular concept. 01 Colours that make life easier. A consistent colour coding concept and durable LED technology make Busch-priOn® extremely easy to operate. The dial lights up in the colours of the coding system, thus providing feedback on the function currently selected. Yellow stands for lighting, blue for the blind control unit, magenta for light scenes and orange for the heating control unit. These colours are also found on the rocker switches of the control element panels. 01 Rotary control element 02 03 The rotary control element is equipped with a freely programmable button which can be pressed and turned. It can be used to switch and dim individual lamps, but also to switch on whole groups of lamps with one press of a button and vary their brightness continuously via the dial. The single control element is equipped with a freely programmable „large“ operating button. It can be assigned to one topic and can carry out a maximum of two commands. The triple control element is equipped with 3 freely programmable control buttons. Each can be assigned to one topic and can carry out a maximum of two commands. Function Switching | Dimming | Blinds | Value | Buttons | Light scenes | Logic functions | Time functions Function Switching | Dimming | Blinds | Value | Buttons | Light scenes | Logic functions | Time functions Function Dimming | Blinds | Value | Light scenes | Logic functions | Time functions Features Illuminated rocker switch | Colour coding concept | Freely programmable control button | Anti-theft protection | Replaceable labelling symbol (Fig. shows Lighting labelling symbol) Features Illuminated rocker switches | Colour coding concept | Freely programmable control buttons | Anti-theft protection | Replaceable labelling symbol (Fig. shows labelling symbols Lighting, Blinds and Scene) Features Illuminated dial | Colour coding concept | Anti-theft protection | Day/night operation 0405 0607 02 1gang control element 03 3gang control element 04 Glass black 05 Studiowhite, glossy 06 Stainless steel 07 White glass Busch-priOn® received special commendment in the category „best of the best,“ winning the „red dot award: communication design 2008“ for its interface design. 68 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Busch-priOn® A 12 01 02 A single-line display with integrated room temperature controller has been designed for the Busch-priOn® 3gang control element, technically reduced to the basics and optically elegant. It is particularly easy to read due to the monochromatic design for white on black information. The room temperature controller, information function like time and date, up to 17 freely programmable text displays, IR sensor and proximity sensor have been integrated into the display. The design of the display is available in the colour and material “glass black” only. 03 04 Busch-priOn® is ideal in combination with the carat® switch series, which has surfaces in the same design. The 8.9 cm (3.5”) TFT display gives a clear overview of all information. Operation is simple intuitive, supported the colour coding concept. It is possible freely combine several Busch-priOn® elements with each other. display and a special allow simple and convenient control. 05 Busch-priOn® is a nonfixed, modular-design system. The rocker switches of the triple control element allow you to call up freely programmable functions such as light scenes, blind functions or specific lamps. The 8.9 cm (3.5”) TFT display gives a clear overview of all information. The user can choose from 3 surface designs: black, blue and silver. Blinds Climate control 01 3gang control element with single-line display and temperature controller 02 2gang combination 03 3gang combination 04 carat® glass black Scene The Busch-priOn® flush-mounted movement sensor can be used individually or with other Busch-priOn® modules. Practical because users thus do not have to look for the light switch and are greeted with light when first entering a dark room. Note: We can only give you a rough idea here of the wide range of combinations offered by this modular concept. For more detailed information, see our separate product brochure / planning aid or the catalogue. 05 Flush-mounted movement sensor ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 69 ABB i-bus® KNX Operation – Planning aid for Busch-priOn® End strips without function A 12 studio white, Article-No. 6348-24G-101-500 white glass, Article-No. 6348-811-101-500 glass black, Article-No. 6348-825-101-500 stainless steel, Article-No. 6348-860-101-500 Support frame, bus coupler Bus coupler Busch-priOn®, Article-No. 6120/12-101 1gang, Article-No. 6346/10-101-500 Note: This power adaptor can supply up to 15 power bus couplers with current. Power adaptor REG, Article-No. CP-D 24/2.5 Bus coupler Busch-priOn®, Article-No. 6120/13-500 Without end strip incl. temperature reading FM actuators 2gang, Article-No. 6346/11-101-500 3gang, Article-No. 6346/12-101-500 Switch actuator, 1gang, FM 2.300 w/VA, Article-No. 6354 U-500 Universal dimming actuator, 1gang, FM 10–450 w/VA, Article-No. 6355 U-500 End strip Serial/blind actuator, 2/1gang, FM 2.300 w/VA, Article-No. 6356 U-500 End strips without function studio white, Article-No. 6349-24G-101-500 Commissioning adaptor, Article-No. 6149/21-500 white glass, Article-No. 6349-811-101-500 glass black, Article-No. 6349-825-101-500 stainless steel, Article-No. 6349-860-101-500 70 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Planning aid for Busch-priOn® End strip with IR proximity function Colour range A 12 Note: only combinable with 3gang control element glass black, Article-No. 6350-825-101-500 Single-line display and room thermostat, Article-No. 6351-825-101-500 Control element, 1gang, Article-No. 6340-825-101-500 Control element, 3gang, Article-No. 6342-825-101-500 Busch-p r iOn® glass black Busch-p r iOn® white glass Busch-p r iOn® stainless steel Busch-p r iOn® studio white, gloss Colour display with rotary control element, Article-No. 6344-825-101-500 Rotary control element, 1gang, Article-No. 6341-825-101-500 End strips with temperature sensor. Busch-Watchdog, 180 FM, Article-No. 6345-825-101-500 Not combinable with FM actuators. studio white, Article-No. 6352-24G-101-500 white glass, Article-No. 6352-811-101-500 glass black, Article-No. 6352-825-101-500 Labelling symbols Labelling inserts for blinds, lighting, RTC and scene. The colours are repeated in the Busch-Jaeger colour concept. stainless steel, Article-No. 6352-860-101-500 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 71 ABB i-bus® KNX Operation – Busch-priOn® A 12 Bus Coupler, FM for Busch-priOn® support frame 1-fold 6346/10-10x and control elements 6122/0x-xxx, 6124/0x-xxx, 6125/0x-xxx, 6126/0x-xxx, 6127/0x-xxx, 6128/0x-xxx and 6129/0x-xxx. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6120/12-101-500 swiss version – 6120/12-101-500 6120-0-0075 1 – 6120/12-101-508 6120-0-0076 1 kg Power Bus Coupler, FM, Busch-priOn® For Busch-priOn® base frame 1-fold, 2-fold and 3-fold. Separate power supply required. The KNX connection is used exclusively for bus communication. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6120/13-500 swiss version – 6120/13-500 6120-0-0072 1 – 6120/13-508 6120-0-0073 1 kg Switch Actuator/Sensor, 1-fold, FM, Busch-priOn® For switching incandescent lamps, 230 V halogen lamps, fluorescent lamps and low-voltage halogen lamps operated using transformers 3-wire technology (Neutral conductor required). Only in conjunction with a 2-fold and 3-fold base frame Cannot be combined with the lower finishing strip with temperature sensor. Description MW Type Order code 6354 U-500 Price Pack Weight 1 pc. unit 1 pc. E pc. – 6354 U-500 6310-0-0097 kg 1 Shutter/2-fold Actuator, FM, Busch-priOn® Only in conjunction with a 2-fold and 3-fold base frame. Not suitable for switching fluorescent lamps, HQI lamps and HQL lamps. Cannot be combined with the lower finishing strip with temperature sensor. Description MW Type Order code 6356 U-500 Price Pack Weight 1 pc. unit 1 pc. E pc. – 6356 U-500 6310-0-0099 kg 1 Shutter/2-fold Actuator, FM, Busch-priOn® Only in conjunction with a 2-fold and 3-fold base frame Not suitable for switching fluorescent lamps, HQI lamps and HQL lamps. Cannot be combined with the lower finishing strip with temperature sensor. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6355 U-500 – 6355 U-500 6310-0-0098 72 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg ABB i-bus® KNX Operation – Busch-priOn® Base Frame, 1-fold, Busch-priOn® For Busch-priOn® for seating and contact connection of rotary control elements, operating element 1-fold and 3-fold as well as the top/bottom finishing strip. For contacting with the Bus Coupler priOn or Power Bus Coupler priOn. 6346/10-101-500 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6346/10-101-500 6310-0-0135 kg 1 Base Frame, 2-fold, Busch-priOn® For Busch-priOn® for seating and contact connection of 8.89 cm (3.5") TFT colour display with rotary control element, rotary control element 1-fold and 3-fold as well as the top/bottom finishing strip. For contacting with the Power Bus Coupler priOn. Description MW Type Order code 6346/11-101-500 Price Pack Weight 1 pc. unit 1 pc. E pc. – 6346/11-101-500 6310-0-0137 kg 1 Base Frame, 3-fold, Busch-priOn® For Busch-priOn® for seating and contact connection of 8.89 cm (3.5") TFT colour display with rotary control element, rotary control element 1-fold and 3-fold as well as the top/bottom finishing strip. For contacting with the Power Bus Coupler priOn. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6346/12-101-500 6310-0-0139 kg 1 6346/12-101-500 6340-825-101-500 Control Element, 1-fold, Busch-priOn® Freely programmable multi-function operation element for installation in the Base Frame 1-fold, 2-fold or 3-fold. Supports the KNX functions with innovative colour concept on the labelling symbols or standard lighting in red/green. The accompanying symbol can be substituted by other alternative labelling symbols. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. studio white, high gloss – 6340-24G-101-500 6310-0-0109 1 white glass – 6340-811-101-500 6310-0-0168 1 glass black – 6340-825-101-500 6310-0-0108 1 stainless steel – 6340-866-101-500 6310-0-0106 1 kg ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 73 A 12 ABB i-bus® KNX Operation – Busch-priOn® A 12 6342-825-101-500 Control Element, 3-fold, Busch-priOn® Freely programmable multi-function operation element for installation in the Base Frame 1-fold, 2-fold or 3-fold. Supports the KNX functions with innovative colour concept on the labelling symbols or standard lighting in red/green. The accompanying symbol can be substituted by other alternative labelling symbols. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. studio white, high gloss – 6342-24G-101-500 6310-0-0125 1 white glass – 6342-811-101-500 6310-0-0172 1 glass black – 6342-825-101-500 6310-0-0124 1 stainless steel – 6342-866-101-500 6310-0-0122 1 kg Rotary Control Element, 1-fold, Busch-priOn® Freely programmable multi-function rotary control element for installation in the Base Frame 1-fold, 2-fold or 3-fold. Supports the KNX functions with innovative colour concept on the rotary knob or standard lighting in red/green. Rotary knob stainless steel. 6341-825-101-500 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6344-825-101-500 studio white, high gloss – 6341-24G-101-500 6310-0-0117 1 white glass – 6341-811-101-500 6310-0-0170 1 glass black – 6341-825-101-500 6310-0-0116 1 stainless steel – 6341-866-101-500 6310-0-0114 1 kg 8.89 cm (3.5") TFT Colour Display with Rotary Control Element, Busch-priOn® Freely programmable 8.89 cm (3.5") TFT colour display with rotary control element for installation in the Base Frame, 2-fold or 3-fold. For representation of up to 120 functions. With integrated weekly time switch, alarm, timer, with light scene function, screensaver and control of multimedia devices (in conjunction with additional device). Free function inscription with user-defined texts and symbols. Supports the KNX functions with innovative colour concept on the rotary knob. Rotary knob stainless steel. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. studio white, high gloss – 6344-24G-101-500 6310-0-0133 1 white glass – 6344-811-101-500 6310-0-0174 1 glass black – 6344-825-101-500 6310-0-0132 1 stainless steel – 6344-866-101-500 6310-0-0130 1 74 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 kg ABB i-bus® KNX Operation – Busch-priOn® A 12 Busch Watchdog® 180 FM Sensor, Busch-priOn® Sends switching commands with motion detection in combination with the bus coupler Busch-priOn®. Programmable via ETS for automatic and semi-automatic operation. Description MW Type Order code 6345-825-101-500 Price Pack Weight 1 pc. unit 1 pc. E pc. 6348-825-101-500 studio white, high gloss – 6345-24G-101-500 6310-0-0081 1 white glass – 6345-811-101-500 6310-0-0176 1 glass black – 6345-825-101-500 6310-0-0080 1 stainless steel – 6345-866-101-500 6310-0-0078 1 Top End Strip, Busch-priOn® For mounting on Base Frame 1-fold to 3-fold. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6350-825-101-500 studio white, high gloss – 6348-24G-101-500 6310-0-0147 1 white glass – 6348-811-101-500 6310-0-0178 1 glass black – 6348-825-101-500 6310-0-0146 1 stainless steel – 6348-866-101-500 6310-0-0144 1 kg Top End Strip with IR Receiver and Proximity Sensor, Busch-priOn® For mounting on Base Frame 1-fold to 3-fold. With integrated IR receiver for control by IR handheld control as well as integrated proximity function. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. glass black 6349-825-101-500 kg – 6350-825-101-500 6310-0-0157 kg 1 Bottom End Strip without logo, Busch-priOn® For mounting on Base Frame 1-fold to 3-fold. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. studio white, high gloss – 6349-24G-101-500 6310-0-0155 1 white glass – 6349-811-101-500 6310-0-0180 1 glass black – 6349-825-101-500 6310-0-0154 1 stainless steel – 6349-860-101-500 6310-0-0152 1 kg ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 75 ABB i-bus® KNX Operation – Busch-priOn® A 12 6352-825-101-500 Bottom End Strip with Temperature Sensor, Busch-priOn® For mounting on Base Frame 1-fold to 3-fold. Provides the value measured by the temperature sensor to the 8.89 cm (3.5") TFT colour display or the room thermostat. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6351-825-101-500 studio white, high gloss – 6352-24G-101-500 6310-0-0165 1 white glass – 6352-811-101-500 6310-0-0182 1 glass black – 6352-825-101-500 6310-0-0164 1 stainless steel – 6352-860-101-500 6310-0-0162 1 kg Top End Strip with Display, Room Thermostat, IR Receiver and Proximity Sensor, Busch-priOn® In combination with control element 3-fold, Busch-priOn®. With integrated room thermostat, display, proximity sensor and IR receiver. Room thermostat for heating and cooling (PI, PWM or 2-point) and control of up to 5-speed Fan Coil Actuators. Display for indication of 1 bit; 1, 2, 3, 4 or 14 byte values as text or symbols. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. glass black – 6351-825-101-500 6310-0-0092 kg 1 Inscription Symbols, Busch-priOn® For Busch-priOn® operating element 1-fold to 3-fold with different symbols. Description MW Type Order code 6353/20-860-500 Price Pack Weight 1 pc. unit 1 pc. E pc. lighting – 6353/20-860-500 6310-0-0093 10 blind – 6353/30-860-500 6310-0-0094 10 Room Temperature – 6353/40-860-500 6310-0-0095 10 scene – 6353/50-860-500 6310-0-0096 10 kg Commissioning Interface / Adapter 6120/12-101-500 and 6120/13-500 via USB port or via SD card slot. With integrated battery for independent operation for up to 8 h. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6149/21-500 6133-0-0201 kg 1 2CDC 271 028 F0b07 6149/21-500 Power Supply, 24 V, 2.5 A, MDRC For Busch-priOn® Power Bus Coupler 6120/13-500. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – CP-D 24/2.5 2CDG120037R0011 CP-D 24/2.5 76 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg A 12 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 77 ABB i-bus® KNX Operation – Standard control elements A 12 The standard control elements are available as 1/2gang, 2/4gang or 4/8gang models. Every switch rocker has two LEDs, which display the status of the connected loads. The separate switch rockers are freely programmable and are suitable for switching and dimming, and also for operating blinds and as a light scene extension unit. They can also be used in commercial applications. Anti-theft protection has also been integrated – an important factor for installations in public areas. Customised text. Pictograms can be applied to push buttons for easier orientation. A clear text template with standard symbols is included for every sensor. The self-explanatory pictograms are available for the complete range of building control technology and if necessary can be easily replaced. If the appropriate symbol is not included, the push buttons can be labelled as desired. The related bus-coupler unit is included in delivery. 01 Standard control element 1/2gang 02 Standard control element 2/4gang 03 Standard control element 4/8gang 01 02 03 Function Switching | Dimming | Blinds | Pushbutton | Value transmitter | Light scene extension unit Function Switching | Dimming | Blinds | Pushbutton | Value transmitter | Light scene extension unit Function Switching | Dimming | Blinds | Pushbutton | Value transmitter | Light scene extension unit Features Labellable switch rockers | Anti-theft protection | Freely programmable switches | Status/orientation light (red/green/OFF) Features Labellable switch rockers | Anti-theft protection | Freely programmable switches | Status/orientation light (red/green/OFF) Features Labellable switch rockers | Anti-theft protection | Freely programmable switches | Status/orientation light (red/green/OFF) 78 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Standard control elements A 12 With labelling field. Transparent labelling sheet 6125/01 6126/01 6127/01 Standard control element, Standard control element, Standard control element, 1-fold with bus coupler enclosed 2-fold with bus coupler enclosed 4-fold with bus coupler enclosed With 1 Control element: rocker switch left/right With 2 Control elements: rocker switch left/right With 4 Control elements: rocker switch left/right with standard symbols included in delivery. Display elements: Two LED per rocker via separate communication object for status (Red/Green/OFF) or orientation light. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 63 mm x 63 mm Pack Weight Description unit 1 pc. 1 pc. 1 pc. 1 pc. pc. kg E E E Type Order code Price Type Order code Price Type Order code Price future linear ® 1 anthracite 6125/01-81-500 6115-0-0205 6126/01-81-500 6116-0-0195 6127/01-81-500 6117-0-0221 1 savanne/ivory 6125/01-82-500 6115-0-0206 6126/01-82-500 6116-0-0196 6127/01-82-500 6117-0-0222 1 aluminium silver 1) 6125/01-83-500 6115-0-0207 6126/01-83-500 6116-0-0197 6127/01-83-500 6117-0-0223 1 davos/studio white 6125/01-84-500 6115-0-0183 6126/01-84-500 6116-0-0174 6127/01-84-500 6117-0-0200 1 studio white, matt 1) 6125/01-884-500 6115-0-0214 6126/01-884-500 6116-0-0204 6127/01-884-500 6117-0-0230 1 black, matt 1) 6125/01-885-500 6115-0-0215 6126/01-885-500 6116-0-0205 6127/01-885-500 6117-0-0231 solo® 1 savanne/ivory 6125/01-82-500 6115-0-0206 6126/01-82-500 6116-0-0196 6127/01-82-500 6117-0-0222 1 davos/studio white 6125/01-84-500 6115-0-0183 6126/01-84-500 6116-0-0174 6127/01-84-500 6117-0-0200 1 meteor/grey metallic 1) 6125/01-803-500 6115-0-0212 6126/01-803-500 6116-0-0202 6127/01-803-500 6117-0-0228 1 sahara/yellow 6125/01-815-500 6115-0-0213 6126/01-815-500 6116-0-0203 6127/01-815-500 6117-0-0229 6125/01-81-500 6126/01-81-500 6127/01-81-500 carat 1 anthracite 6115-0-0205 6116-0-0195 6117-0-0221 1 savanne/ivory 6125/01-82-500 6115-0-0206 6126/01-82-500 6116-0-0196 6127/01-82-500 6117-0-0222 1 davos/studio white 6125/01-84-500 6115-0-0183 6126/01-84-500 6116-0-0174 6127/01-84-500 6117-0-0200 pure stainless steel 1) 1 pure stainless steel 6125/01-866-500 6115-0-0211 6126/01-866-500 6116-0-0201 6127/01-866-500 6117-0-0227 Busch-axcent® 1 davos/studio white 6125/01-84-500 1 chalet-white 6125/01-896-500 6115-0-0449 1) 6115-0-0183 6126/01-84-500 6116-0-0174 6126/01-896-500 6116-0-0224 6127/01-84-500 6117-0-0200 6127/01-896-500 6117-0-0249 Surface painted ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 79 ABB i-bus® KNX Operation – Multifunction control elements A 12 The multifunction control elements with LED colour code concept meet the highest demands for comfort and technology. They each come with two RGB LEDs per rocker switch, which conform to a consistent colour concept. This makes the function obvious at a glance, and the surfaces can be additionally fitted with pictograms. Each side of a rocker switch can be occupied with its own function – each for calling up one light scene, for instance. This turns a 4gang control element into an 8gang control element. Wide range. Different shapes, colours and materials fulfil every requirement. KNX control elements are available in the carat®, pure stainless steel, solo®, Busch-axcent® and future® linear programmes. The complete range of conventional switches from these series is available, so there are no limits to the options for combining KNX components. 01 02 Function Switching | Dimming | Blinds | Pushbutton | Value transmitter | Light scene extension unit | Step-type | Multiple operation | Logic function (including light scenes) Function Switching | Dimming | Blinds | Pushbutton | Value transmitter | Light scene extension unit | Step-type | Multiple operation | Logic function (including light scenes) Function Switching | Dimming | Blinds | Pushbutton | Value transmitter | Light scene extension unit | Step-type | Multiple operation | Logic function (including light scenes) Features Labellable switch rockers | Anti-theft protection | Freely programmable switches | LED colour code concept Features Labellable switch rockers | Anti-theft protection | Freely programmable switches | LED colour code concept Features Labellable switch rockers | Anti-theft protection | Freely programmable switches | LED colour code concept 03 01Multifunction control element 1/2gang 02 Multifunction control element 2/4gang 03 Multifunction control element 4/8gang 04 Room temperature controller 05 Multifunction control element 2/4gang, integrated room thermostat 06 Multifunction control element 3/6gang with IR reception 07FM movement detector standard 08 FM movement detector comfort 80 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Multifunction control elements A 12 04 05 Function Comfort | Stand-by | Night mode | Frost protection | Specified temperature | Time | Date | Heating | Cooling | Fan Coil operation for heating and cooling | Light scenes | Light scene extension unit | Value | Logic function (including light scenes) Function Comfort | Stand-by | Night mode | Frost protection | Specified temperature | Time | Date | Heating | Cooling | Fan Coil operation for heating and cooling | Light scenes | Light scene extension unit | Value | Logic function (including light scenes) Features Labellable switch rockers | Anti-theft protection | Display illumination | LED colour code concept Features Labellable switch rockers | Anti-theft protection | Display illumination | Colour concept 06 Function 10 freely programmable IR channels | Switching | Dimming | Blinds | Button | Light scenes | Light scene extension unit | Value | Logic function (including light scenes) 07 08 Features Labellable switch rockers | Antitheft protection | Display illumination | Colour concept Function 4 channels | Logic function (including light scenes) ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 81 ABB i-bus® KNX Operation – Multifunction control elements A 12 6125/02 6126/02 6127/02 For BCU 6120/12-101-500 or 6120/13-500. Control element, 1/2-fold Control element, 2/4-fold Control element, 4/8-fold With labelling field. Support of KNX functions Multi-function/colour concept Multi-function/colour concept Multi-function/colour concept through innovative colour concept or standard With 1 Control element: rocker switch left/right With 2 Control elements: rocker switch left/right With 4 Control elements: rocker switch left/right illumination red/green. Push switch function: switching/dimming/blind/sending values/scenes etc. Transparent labelling sheet with standard symbols included in delivery. Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Display elements: Two LED per rocker via separate communication object for status (Red/Green/OFF) or orientation light. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 63 mm x 63 mm Type Order code Price Type Order code Price Type Order code Price Pack Weight Description unit 1 pc. 1 pc. 1 pc. 1 pc. pc. kg E E E future linear ® 1 anthracite 6125/02-81-500 6115-0-0216 6126/02-81-500 6116-0-0206 6127/02-81-500 6117-0-0232 1 savanne/ivory 6125/02-82-500 6115-0-0217 6126/02-82-500 6116-0-0207 6127/02-82-500 6117-0-0233 1 aluminium silver 1) 6125/02-83-500 6115-0-0218 6126/02-83-500 6116-0-0208 6127/02-83-500 6117-0-0234 1 davos/studio white 6125/02-84-500 6115-0-0219 6126/02-84-500 6116-0-0209 6127/02-84-500 6117-0-0235 1 studio white, matt 1) 6125/02-884-500 6115-0-0226 6126/02-884-500 6116-0-0216 6127/02-884-500 6117-0-0242 1 black, matt 6125/02-885-500 6115-0-0227 6126/02-885-500 6116-0-0217 6127/02-885-500 6117-0-0243 1) solo® 1 savanne/ivory 6125/02-82-500 6115-0-0217 6126/02-82-500 6116-0-0207 6127/02-82-500 6117-0-0233 1 davos/studio white 6125/02-84-500 6115-0-0219 6126/02-84-500 6116-0-0209 6127/02-84-500 6117-0-0235 1 meteor/grey metallic 1) 6125/02-803-500 6115-0-0224 6126/02-803-500 6116-0-0214 6127/02-803-500 6117-0-0240 1 sahara/yellow 1) 6125/02-815-500 6115-0-0225 6126/02-815-500 6116-0-0215 6127/02-815-500 6117-0-0241 carat 1 anthracite 6125/02-81-500 6115-0-0216 6126/02-81-500 6116-0-0206 6127/02-81-500 6117-0-0232 1 savanne/ivory 6125/02-82-500 6115-0-0217 6126/02-82-500 6116-0-0207 6127/02-82-500 6117-0-0233 1 davos/studio white 6125/02-84-500 6115-0-0219 6126/02-84-500 6116-0-0209 6127/02-84-500 6117-0-0235 pure stainless steel 1) 1 pure stainless steel 6125/02-866-500 6115-0-0223 6126/02-866-500 6116-0-0213 6127/02-866-500 6117-0-0239 Busch-axcent® 1 davos/studio white 6125/02-84-500 1 chalet-white 6125/02-896-500 6115-0-0451 1) 6115-0-0219 6126/02-84-500 6116-0-0209 6126/02-896-500 6116-0-0226 6127/02-84-500 6117-0-0235 6127/02-896-500 6117-0-0251 Surface painted 82 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Multifunction control elements 6129/01 Control Element, 3/6-fold, multifunction, with IR-Interface, FM suitable for KNX bus coupler 6120/12-101-500 and 6120/13-500. With IR interface for Buschremote controllers 6010-25 or 6020-…/6021-… . Push button function: switching/dimming/ blind/value sending/light scenes/step-type switch functions. Switch contacts left/right. Two freely programmable RGB LEDs per rocker. With RGB colour code concept or red/green/ OFF-operation. With labeling field. Transparent labeling sheet with standard symbols included in delivery. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg future® linear anthracite – 6129/01-81-500 6135-0-0156 1 savanne/ivory – 6129/01-82-500 6135-0-0157 1 aluminium silver 1) – 6129/01-83-500 6135-0-0158 1 davos/studio white – 6129/01-84-500 6135-0-0146 1 studio white, matt 1) – 6129/01-884-500 6135-0-0165 1 black, matt 1) – 6129/01-885-500 6135-0-0166 1 – 6129/01-82-500 6135-0-0157 1 solo® savanne/ivory davos/studio white – 6129/01-84-500 6135-0-0146 1 meteor/grey metallic 1) – 6129/01-803-500 6135-0-0163 1 sahara/yellow – 6129/01-815-500 6135-0-0164 1 anthracite – 6129/01-81-500 6135-0-0156 1 savanne/ivory – 6129/01-82-500 6135-0-0157 1 davos/studio white – 6129/01-84-500 6135-0-0146 1 – 6129/01-866-500 6135-0-0162 1 davos/studio white – 6129/01-84-500 6135-0-0146 1 chalet-white – 6129/01-896-500 6135-0-0170 1 carat pure stainless steel 1) pure stainless steel Busch-axcent® 1) Surface painted ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 83 A 12 ABB i-bus® KNX Operation – Movement Detectors A 12 6122/01 6122/02 Movement detector with up to 4 channels. Busch-Watchdog 180 flush-mounted standard sensor Incl. 10 logic channels (light scene actuator, sequence actuator, Busch-Watchdog 180 flush-mounted comfort sensor II Incl. 10 logic channels (light scene actuator, sequence actuator, For ABB i-bus® KNX 6120/12-101, 6120/13. logic gates, etc.) logic gates, etc.) Pack Weight Description Type unit 1 pc. 1 pc. 1 pc. pc. kg E E Order code Price Type Order code future linear ® 1 anthracite 6122/01-81-500 6132-0-0272 6122/02-81-500 1 savanne/ivory 6122/01-82-500 6132-0-0273 6122/02-82-500 6132-0-0284 1 aluminium silver 1) 6122/01-83-500 6132-0-0274 6122/02-83-500 6132-0-0285 1 davos/studio white 6122/01-84-500 6132-0-0250 6122/02-84-500 6132-0-0263 1 studio white, matt 1) 6122/01-884-500 6132-0-0281 6122/02-884-500 6132-0-0292 1 black, matt 1) 6122/01-885-500 6132-0-0282 6122/02-885-500 6132-0-0293 6132-0-0284 6132-0-0283 solo® 1 savanne/ivory 6122/01-82-500 6132-0-0273 6122/02-82-500 1 davos/studio white 6122/01-84-500 6132-0-0250 6122/02-84-500 6132-0-0263 1 meteor/grey metallic 1) 6122/01-803-500 6132-0-0279 6122/02-803-500 6132-0-0290 1 sahara/yellow 6122/01-815-500 6132-0-0280 6122/02-815-500 6132-0-0291 carat 1 anthracite 6122/01-81-500 6132-0-0272 6122/02-81-500 6132-0-0283 1 savanne/ivory 6122/01-82-500 6132-0-0273 6122/02-82-500 6132-0-0284 1 davos/studio white 6122/01-84-500 6132-0-0250 6122/02-84-500 6132-0-0263 6122/01-866-500 6132-0-0278 6122/02-866-500 6132-0-0289 pure stainless steel 1) 1 pure stainless steel Busch-axcent® 1 davos/studio white 6122/01-84-500 6132-0-0250 6122/02-84-500 6132-0-0263 1 chalet-white 6122/01-896-500 6132-0-0322 6122/02-896-500 6132-0-0324 1) Surface painted 84 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Price ABB i-bus® KNX Operation – Room Thermostats A 12 6124/01 6128/01 Room Thermostat with Display, FM suitable for KNX bus coupler 6120/12-101-500 Switch contacts left/right to adjust set-points and operating mode manualy. Two freely programmable RGB LEDs per rocker. With RGB and 6120/13-500. For heating and cooling Room Thermostat with Display and 2/4-fold Switch Sensor, FM Push button function: switching/dimming/blind/value sending/light scenes/step-type switch functions. Switch contacts left/right. Two freely (PI, PWM or 2-point). Constant room temperature colour code concept or red/green/OFF-operation. LCD displaying opera- programmable RGB LEDs per rocker. With RGB colour code concept or controller for fan-coil applications (up to 5-speed tion mode, temperature, time and date. With labeling field. Transparent red/green/OFF-operation. LCD displaying operation mode, temperature, level ventilation actuators in 2- and 4-pipe time and date. With labeling field. Transparent labeling sheet with stan- labeling sheet with standard symbols included in delivery. dard symbols included in delivery. systems) and conventional heating and cooling systems. With manual and automatic adjustment of fan levels. Pack Weight Description unit 1 pc. 1 pc. 1 pc. pc. kg E E Type Order code Price Type Order code Price future linear ® 1 anthracite 6124/01-81-500 6134-0-0295 6128/01-81-500 1 savanne/ivory 6124/01-82-500 6134-0-0274 6128/01-82-500 6134-0-0284 6134-0-0285 1 aluminium silver 1) 6124/01-83-500 6134-0-0275 6128/01-83-500 6134-0-0286 1 davos/studio white 6124/01-84-500 6134-0-0248 6128/01-84-500 6134-0-0261 1 studio white, matt 1) 6124/01-884-500 6134-0-0282 6128/01-884-500 6134-0-0293 1 black, matt 1) 6124/01-885-500 6134-0-0283 6128/01-885-500 6134-0-0294 6134-0-0285 solo® 1 savanne/ivory 6124/01-82-500 6134-0-0274 6128/01-82-500 1 davos/studio white 6124/01-84-500 6134-0-0248 6128/01-84-500 6134-0-0261 1 meteor/grey metallic 1) 6124/01-803-500 6134-0-0280 6128/01-803-500 6134-0-0291 1 sahara/yellow 6124/01-815-500 6134-0-0281 6128/01-815-500 6134-0-0292 carat 1 anthracite 6124/01-81-500 6134-0-0295 6128/01-81-500 6134-0-0284 1 savanne/ivory 6124/01-82-500 6134-0-0274 6128/01-82-500 6134-0-0285 1 davos/studio white 6124/01-84-500 6134-0-0248 6128/01-84-500 6134-0-0261 6124/01-866-500 6134-0-0279 6128/01-866-500 6134-0-0290 pure stainless steel 1) 1 pure stainless steel Busch-axcent® 1 davos/studio white 6124/01-84-500 6134-0-0248 6128/01-84-500 6134-0-0261 1 chalet-white 6124/01-896-500 6134-0-0304 6128/01-896-500 6134-0-0306 1) Surface painted ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 85 ABB i-bus® KNX Operation – Frames A 12 Frames, future® linear For vertical and horizontal installation. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 1721-184K 1-fold, anthracite – 1721-181K 1754-0-4240 10 1-fold, savanna/ivory – 1721-182K-500 1754-0-4506 10 1-fold, aluminium silver 1) – 1721-183K-500 1754-0-4529 10 1-fold, davos/studio white – 1721-184K-500 1754-0-4498 10 1-fold, studio white, matt 1) – 1721-884K-500 1754-0-4531 10 1-fold, black matt 1) – 1721-885K-500 1754-0-4532 10 2-fold, anthracite – 1722-181K 1754-0-4241 10 2-fold, savanna/ivory – 1722-182K 1754-0-4231 10 – 1722-183K-500 1754-0-4530 10 2-fold, davos/studio white – 1722-184K-500 1754-0-4499 10 2-fold, studio white, matt 1) – 1722-884K 1754-0-4415 10 2-fold, black matt 1) – 1722-885K-500 1754-0-4534 10 3-fold, anthracite – 1723-181K 1754-0-4242 10 3-fold, savanna/ivory – 1723-182K 1754-0-4232 10 3-fold, aluminium silver 1) – 1723-183K-500 1754-0-4533 10 3-fold, davos/studio white – 1723-184K-500 1754-0-4502 10 3-fold, studio white, matt 2-fold, aluminium silver 1) – 1723-884K 1754-0-4416 10 3-fold, black matt 1) – 1723-885K 1754-0-4421 10 4-fold, anthracite – 1724-181K 1754-0-4243 10 4-fold, savanna/ivory – 1724-182K 1754-0-4233 10 4-fold, aluminium silver 1) – 1724-183K 1754-0-4309 10 4-fold, davos/studio white – 1724-184K 1754-0-4238 10 4-fold, studio white, matt 1) – 1724-884K 1754-0-4417 10 4-fold, black matt 1) – 1724-885K 1754-0-4422 10 5-fold, anthracite – 1725-181K 1754-0-4244 1 5-fold, savanna/ivory – 1725-182K 1754-0-4234 1 5-fold, aluminium silver 1) – 1725-183K 1754-0-4310 1 1) 5-fold, davos/studio white – 1725-184K-500 1754-0-4517 1 5-fold, studio white, matt 1) – 1725-884K 1754-0-4418 1 5-fold, black matt 1) – 1725-885K 1754-0-4423 1 1) Surface painted 86 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 kg ABB i-bus® KNX Operation – Frames A 12 Frames, solo® For vertical and horizontal installation. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 1721-80 1-fold, chrome, matt – 1721-80-500 1754-0-4535 10 1-fold, chrome, glossy – 1721-80G-500 1754-0-4538 10 1-fold, davos/studio white – 1721-84-500 1754-0-4536 10 2-fold, chrome, matt – 1722-80-500 1754-0-4537 10 2-fold, chrome, glossy – 1722-80G 1754-0-4327 10 2-fold, davos/studio white – 1722-84-500 1754-0-4539 10 3-fold, chrome, matt – 1723-80-500 1754-0-4540 10 3-fold, chrome, glossy – 1723-80G 1754-0-4328 10 3-fold, davos/studio white – 1723-84-500 1754-0-4541 10 4-fold, chrome, matt – 1724-80 1754-0-4107 1 4-fold, chrome, glossy – 1724-80G 1754-0-4329 1 4-fold, davos/studio white – 1724-84 1754-0-4112 1 5-fold, chrome, matt – 1725-80 1754-0-4108 1 5-fold, chrome, glossy – 1725-80G 1754-0-4330 1 5-fold, davos/studio white – 1725-84 1754-0-4113 1 kg Frames, carat® For vertical and horizontal installation. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 1721-860 1-fold, white glass – 1721-811 1754-0-4442 1 1-fold, bronze – 1721-821 1754-0-4258 1 1-fold, gold – 1721-823-101 1754-0-4356 1 1-fold, glass black – 1721-825 1754-0-4322 1 1-fold, chrome – 1721-826-101 1754-0-4360 1 1-fold, stainless steel – 1721-860 1754-0-4254 1 2-fold, white glass – 1722-811 1754-0-4443 1 2-fold, bronze – 1722-821 1754-0-4259 1 2-fold, gold – 1722-823-101 1754-0-4357 1 2-fold, glass black – 1722-825 1754-0-4323 1 2-fold, chrome – 1722-826-101 1754-0-4361 1 2-fold, stainless steel – 1722-860 1754-0-4255 1 3-fold, white glass – 1723-811 1754-0-4444 1 3-fold, bronze – 1723-821 1754-0-4260 1 3-fold, gold – 1723-823-101 1754-0-4358 1 2-fold, glass black – 1722-825 1754-0-4323 1 3-fold, chrome – 1723-826-101 1754-0-4362 1 3-fold, stainless steel – 1723-860 1754-0-4256 1 4-fold, white glass – 1724-811 1754-0-4445 1 4-fold, bronze – 1724-821 1754-0-4261 1 4-fold, gold – 1724-823-101 1754-0-4359 1 4-fold, glass black – 1724-825 1754-0-4325 1 4-fold, chrome – 1724-826-101 1754-0-4363 1 4-fold, stainless steel – 1724-860 1754-0-4257 1 1) 1) 1) 1) 1) kg Gold plated 24 carat ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 87 ABB i-bus® KNX Operation – Frames A 12 Frames, pure stainless steel For vertical and horizontal installation. Stainless steel material. Anti-fingerprint (does not leave any visible fingerprints on the material). Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 1721-866K 1-fold, stainless steel – 1721-866K-500 1754-0-4500 10 2-fold, stainless steel – 1722-866K-500 1754-0-4501 10 3-fold, stainless steel – 1723-866K 1754-0-4319 10 4-fold, stainless steel – 1724-866K 1754-0-4320 1 5-fold, stainless steel – 1725-866K 1754-0-4321 1 kg Frames, axcent For vertical and horizontal installation. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 1722-283 1-fold, black – 1721-281 1754-0-4409 1-fold, brown glass – 1721-283 NEW 1754-0-4543 1 1-fold, davos/studio white – 1721-284 NEW 1754-0-4331 10 1-fold, yellow – 1721-285 NEW 1754-0-4334 10 1-fold, green – 1721-286 NEW 1754-0-4337 10 1-fold, red – 1721-287 NEW 1754-0-4340 10 1-fold, blue – 1721-288 NEW 1754-0-4343 10 1-fold, white glass – 1721-280 1754-0-4437 1-fold, entrée-grey – 1721-291-500 NEW 1754-0-4471 10 1-fold, château-black – 1721-295-500 NEW 1754-0-4491 10 1-fold, chalet-white – 1721-296-500 NEW 1754-0-4486 10 1-fold, foyer-red – 1721-297-500 NEW 1754-0-4476 10 1-fold, maison-beige – 1721-299-500 NEW 1754-0-4481 10 2-fold, black – 1722-281 1754-0-4410 10 2-fold, brown glass – 1722-283 NEW 1754-0-4544 1 2-fold, davos/studio white – 1722-284 NEW 1754-0-4332 10 2-fold, yellow – 1722-285 NEW 1754-0-4335 10 2-fold, green – 1722-286 NEW 1754-0-4338 10 2-fold, red – 1722-287 NEW 1754-0-4341 10 2-fold, blue – 1722-288 NEW 1754-0-4344 10 2-fold, white glass – 1722-280 2-fold, entrée-grey – 1722-291-500 NEW 1754-0-4472 10 2-fold, château-black – 1722-295-500 NEW 1754-0-4492 10 2-fold, chalet-white – 1722-296-500 NEW 1754-0-4487 10 2-fold, foyer-red – 1722-297-500 NEW 1754-0-4477 10 2-fold, maison-beige – 1722-299-500 NEW 1754-0-4482 10 1754-0-4438 Continuation of table „Frames, axcent“ on next page 88 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 10 1 1 kg ABB i-bus® KNX Operation – Frames Continuation of table „Frames, axcent“ Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 3-fold, black – 1723-281 1754-0-4411 3-fold, brown glass – 1723-283 NEW 1754-0-4545 1 3-fold, davos/studio white – 1723-284 NEW 1754-0-4333 10 3-fold, yellow – 1723-285 NEW 1754-0-4336 10 3-fold, green – 1723-286 NEW 1754-0-4339 10 3-fold, red – 1723-287 NEW 1754-0-4342 10 3-fold, blue – 1723-288 NEW 1754-0-4345 10 3-fold, white glass – 1723-280 1754-0-4439 3-fold, entrée-grey – 1723-291-500 NEW 1754-0-4473 10 3-fold, château-black – 1723-295-500 NEW 1754-0-4493 10 3-fold, chalet-white – 1723-296-500 NEW 1754-0-4488 10 3-fold, foyer-red – 1723-297-500 NEW 1754-0-4478 10 3-fold, maison-beige – 1723-299-500 NEW 1754-0-4483 10 4-fold, black – 4-fold, brown glass 4-fold, davos/studio white 10 1 1724-281 1754-0-4412 1 – 1724-283 NEW 1754-0-4546 1 – 1724-284 NEW 1754-0-4346 1 4-fold, yellow – 1724-285 NEW 1754-0-4348 1 4-fold, green – 1724-286 NEW 1754-0-4350 1 4-fold, red – 1724-287 NEW 1754-0-4352 1 4-fold, blue – 1724-288 NEW 1754-0-4354 1 4-fold, white glass – 1724-280 1754-0-4440 1 4-fold, entrée-grey – 1724-291-500 NEW 1754-0-4474 1 4-fold, château-black – 1724-295-500 NEW 1754-0-4494 1 4-fold, chalet-white – 1724-296-500 NEW 1754-0-4489 1 4-fold, foyer-red – 1724-297-500 NEW 1754-0-4479 1 4-fold, maison-beige – 1724-299-500 NEW 1754-0-4484 1 5-fold, black – 1725-281 1754-0-4413 1 5-fold, brown glass – 1725-283 NEW 1754-0-4547 1 5-fold, davos/studio white – 1725-284 NEW 1754-0-4347 1 5-fold, yellow – 1725-285 NEW 1754-0-4349 1 5-fold, green – 1725-286 NEW 1754-0-4351 1 5-fold, red – 1725-287 NEW 1754-0-4353 1 5-fold, blue – 1725-288 NEW 1754-0-4355 1 5-fold, white glass – 1725-280 1754-0-4441 1 5-fold, entrée-grey – 1725-291-500 NEW 1754-0-4475 1 5-fold, château-black – 1725-295-500 NEW 1754-0-4495 1 5-fold, chalet-white – 1725-296-500 NEW 1754-0-4490 1 5-fold, foyer-red – 1725-297-500 NEW 1754-0-4480 1 1725-299-500 NEW 1754-0-4485 1 5-fold, maison-beige – kg ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 89 A 12 ABB i-bus® KNX Operation – Busch-triton® A 12 With freely programmable switch rockers, backlit label fields and IR sensor Busch-triton® is ideal for any application and with its elegant design it is commonly installed in hotels and public areas. Busch-triton® is equipped with an integrated bus coupler and IR receiver. The unit composed of control element and integrated bus coupler now really has everything required to control building systems elegantly and comfortably. Colour-coordinated. The Busch-triton® is available in five stunning colours, offering exactly the right ambience for any environment. The colours offer exactly the right accent to the carat®, impuls, alpha and future® linear ranges – such as the use of the colour-coordinated socket outlets or motion detectors. 011/2gang control element with rear-illuminated labelling area and IR reception 023/6gang control element with rear-illuminated labelling area and IR reception 035/10gang control element with rear-illuminated labelling area and IR reception 01 02 Function Switching | Dimming | Blinds | Value transmitter | Value dimming sensor | Light scene extension unit | Step-type switch | Short/long operation | 13 freely programmable IR channels | 8 light scenes Function Switching | Dimming | Blinds | Value transmitter | Value dimming sensor | Light scene extension unit | Step-type switch | Short/long operation | 13 freely programmable IR channels | 8 light scenes Features Labellable switch rockers | Rearilluminated labelling field | Anti-theft protection | Freely programmable switches | IR remote-controllable | Freely programmable additional key Features Labellable switch rockers | Rearilluminated labelling field | Anti-theft protection | Freely programmable switches | IR remote-controllable 03 Function Switching | Dimming | Blinds | Value transmitter | Value dimming sensor | Light scene extension unit | Step-type switch | Short/long operation | 13 freely programmable IR channels | 8 light scenes Features Labellable switch rockers | Rearilluminated labelling field | Anti-theft protection | Freely programmable switches | IR remote-controllable | Freely programmable additional key 90 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Busch-triton® A 12 01 02 013/6gang control element with rearFunction LCD display room temperature controller | Comfort | Stand-by | Night operation | Frost protection | Heating | Cooling | Fan control | Switching | Dimming | Blinds | Value | 13 freely programmable IR channels | 8 light scenes Features Labellable switch rockers | Rearilluminated labelling field | Anti-theft protection | Freely programmable switches | IR remote-controllable | Freely programmable additional key illuminated labelling field, integrated room thermostat, LCD display and IR reception 025/10gang control element with rearilluminated labelling field, integrated Function LCD display room temperature controller | Comfort | Stand-by | Night operation | Frost protection | Heating | Cooling | Fan control | Switching | Dimming | Blinds | Value | 13 freely programmable IR channels | 8 light scenes room thermostat, LCD display and IR reception Features Labellable switch rockers | Rearilluminated labelling field | Anti-theft protection | Freely programmable switches | IR remote-controllable | Freely programmable additional key ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 91 ABB i-bus® KNX Operation – Busch-triton® A 12 Busch-triton® Control Element, 1/2-fold, FM With intergrated bus coupling unit. With IR interface for Busch-remote controllers. Push button function: switching/dimming/blind/value sending/light scenes/step-type switch functions. Switch contacts left/right. One freely programmable LED per rocker (red/green/OFF). With labeling field. Description MW Type Order code 6320/10-24G-500 Price Pack Weight 1 pc. unit 1 pc. E pc. kg alpha platinum – 6320/10-20-500 6320-0-0002 1 studio white,high gloss – 6320/10-24G-500 6320-0-0004 1 palladium – 6320/10-260-500 6320-0-0010 1 – 6320/10-79-500 6320-0-0006 1 – 6320/10-83-500 6320-0-0008 1 impuls champagne metallic future® linear aluminium silver Busch-triton® Control Element, 3/6-fold, FM With intergrated bus coupling unit. With IR interface for Busch-remote controllers. Push button function: switching/dimming/blind/value sending/light scenes/step-type switch functions. Switch contacts left/right. One freely programmable LED per rocker (red/green/OFF). With labeling field. Description MW Type Order code 6320/30-24G-500 Price Pack Weight 1 pc. unit 1 pc. E pc. alpha platinum – 6320/30-20-500 6320-0-0012 1 studio white,high gloss – 6320/30-24G-500 6320-0-0014 1 palladium – 6320/30-260-500 6320-0-0020 1 – 6320/30-79-500 6320-0-0016 1 – 6320/30-83-500 6320-0-0018 1 impuls champagne metallic future® linear aluminium silver 92 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 kg ABB i-bus® KNX Operation – Busch-triton® Busch-triton® Control Element, 5/10-fold, FM With intergrated bus coupling unit. With IR interface for Busch-remote controllers. Push button function: switching/dimming/blind/value sending/light scenes/step-type switch functions. Switch contacts left/right. One freely programmable LED per rocker (red/green/OFF). With labeling field. Description MW Type Order code 6320/50-24G-500 Price Pack Weight 1 pc. unit 1 pc. E pc. kg alpha platinum – 6320/50-20-500 6320-0-0032 1 studio white,high gloss – 6320/50-24G-500 6320-0-0034 1 palladium – 6320/50-260-500 6320-0-0040 1 – 6320/50-79-500 6320-0-0036 1 – 6320/50-83-500 6320-0-0038 1 impuls champagne metallic future® linear aluminium silver 6320/38-24G-500 Busch-triton® Control Element with Room Thermostat and 3/6-fold Switch Sensor, FM With intergrated bus coupling unit. With IR interface for Busch-remote controllers. For heating and cooling (PI, PWM or 2-point). Constant room temperature controller for fan-coil applications (up to 5-speed level ventilation actuators in 2- and 4-pipe systems) and conventional heating and cooling systems. With manual and automatic adjustment of fan levels. Push button function: switching/ dimming/blind/value sending/light scenes/step-type switch functions. Switch contacts left/right. One freely programmable LED per rocker (red/green/OFF). LCD displaying operation mode and temperature. With labeling field. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg alpha platinum – 6320/38-20-500 6320-0-0022 1 studio white,high gloss – 6320/38-24G-500 6320-0-0024 1 palladium – 6320/38-260-500 6320-0-0030 1 – 6320/38-79-500 6320-0-0026 1 – 6320/38-83-500 6320-0-0028 1 impuls champagne metallic future® linear aluminium silver ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 93 A 12 ABB i-bus® KNX Operation – Busch-triton® A 12 6320/58-24G-500 Busch-triton® Control Element with Room Thermostat and 5/10-fold Switch Sensor, FM With intergrated bus coupling unit. With IR interface for Busch-remote controllers. For heating and cooling (PI, PWM or 2-point). Constant room temperature controller for fan-coil applications (up to 5-speed level ventilation actuators in 2- and 4-pipe systems) and conventional heating and cooling systems. With manual and automatic adjustment of fan levels. Push button function: switching/dimming/blind/value sending/light scenes/step-type switch functions. Switch contacts left/right. One freely programmable LED per rocker (red/green/OFF). LCD displaying operation mode and temperature. With labeling field. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg alpha platinum – 6320/58-20-500 6320-0-0042 1 studio white,high gloss – 6320/58-24G-500 6320-0-0044 1 palladium – 6320/58-260-500 6320-0-0050 1 – 6320/58-79-500 6320-0-0046 1 – 6320/58-83-500 6320-0-0048 1 impuls champagne metallic future® linear aluminium silver Infra-Red Hand Held Transmitter For infra-red receiver and KNX flush-mounted infra-red interface. Switching and dimming of up to 10 consumers in 2 groups (1-5/6-10). Programming and selection of 2 MEMO memories per group is possible. Power supply: 4 alkaline manganese batteries, IEC LR03 (microcell) not included in scope of supply Detection range: frontal 15 m. Description MW Type Order code 6010-25-500 Price Pack Weight 1 pc. unit 1 pc. E pc. – 6010-25-500 6020-0-1133 94 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg A 12 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 95 ABB i-bus® KNX Operation – Push Button Coupling Unit A 12 The push-button coupling unit with a centre position offers maximum flexibility. Installed in a flush-mounted wall box, it accepts switch rockers from conventional switch ranges* like a completely standard flush-mounted insert. Covers from all conventional ranges can now be used for KNX. This offers maximum freedom in the selection of the switch range and makes retrofitting easier. 01 02 Features Easy mounting and uncomplicated commissioning All flush-mounted switch ranges* can be used for the ABB i-bus® KNX Affordable solution for renovations Status/orientation light (red/green/OFF) (only with 1gang push-button/switches) Integration in surface-mounted water protected units 03 04 01 Push-button coupler 1/2gang with integrated bus coupler 02 Push-button coupler 2/4gang with integrated bus coupler 03 Push-button coupler 1/2gang for ocean with integrated bus coupler 04 Push-button coupler 2/4gang for ocean with integrated bus coupler Design without limits. The push-button coupling unit includes the complete range* of switches for KNX. Switch rockers from all switch ranges can now be converted to KNX push buttons, which not only switch on and off but also dim or show the status with an LED (6108/01 and 6108/04 only). 1gang and 2gang models for single and 2gang switch rockers are available. KNX – water protected The push-button coupling unit also allows special products to be used for KNX. Special models for water-protected installation allow covers from, for example, the ocean® surface-mounted range to be used. This means that KNX sensors can also be safely installed in a cellar, outside on a patio or in commercial applications. Temperature range: -25 °C to 45 °C *except impuls, basic55® and All Weather 44 Busch Jaeger switch ranges only available for selected markets. For further information please contact your local ABB office. 96 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Push Button Coupling Unit KNX Switch Connection Unit, FM with intergrated bus coupling unit. With neutral position. Suitable for conventional switch rockers of the following Busch-Jaeger design ranges: Busch-Duro 2000® SI/SI Linear, Reflex SI/SI Linear, future® linear, alpha, solo®, Busch-axcent®, carat® and pure stainless steel*. One freely programmable red/green LED (only 6108/01-500). Description MW Type Order code 6108/01-500 Price Pack Weight 1 pc. unit 1 pc. E pc. 1/2-fold – 6108/01-500 6133-0-0207 1 2/4-fold – 6108/02-500 6133-0-0209 1 kg KNX Switch Connection Unit for design ocean® (IP44), FM with intergrated bus coupling unit. For integration into SM-housing of ocean® range*. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6108/04-500 1/2-fold – 6108/04-500 6133-0-0211 1 2/4-fold – 6108/05-500 6133-0-0213 1 kg *All available switch rockers and additional information about Busch-Jaeger design ranges under www.busch-jaeger.com ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 97 A 12 ABB i-bus® KNX Operation – Room Temperature Controller A 12 Room Temperature Controller, Commercial, FM Room temperature controller without „local operation“. With intergrated bus coupling unit. For heating and cooling. Constant room temperature controller for fan-coil applications (up to 5-speed level ventilation actuators in 2- and 4-pipe systems) and conventional heating and cooling systems. Suitable for cover plates 2114-xxx or 6541-xxx but not suitable for cover plates like 6541-20, -21,-260 and -266. 6108/03-500 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6108/03-500 6134-0-0271 kg 1 Cover Plate for Room Temperature Controller For room temperature controller, commercial. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6541-84 future® linear anthracite – 6541-81 6599-0-2882 10 savanna/ivory – 6541-82 6599-0-2832 10 10 – 6541-83 6599-0-2885 davos/studio white – 6541-84 6599-0-2835 10 studio white, matt – 6541-884 6599-0-2962 10 – 6541-885 6599-0-2967 10 savanna/ivory – 6541-82 6599-0-2832 10 davos/studio white – 6541-84 6599-0-2835 10 – 6541-803 6599-0-2940 10 – 6541-815 6599-0-2936 10 anthracite – 6541-81 6599-0-2882 10 savanna/ivory – 6541-82 6599-0-2832 10 davos/studio white – 6541-84 6599-0-2835 10 – 6541-866 6599-0-2924 10 davos/studio white – 6541-84 6599-0-2835 10 chalet-white – 6541-896 6599-0-2998 10 aluminium silver black matt 1) 1) 1) solo® meteor/grey metallic sahara/yellow 1) carat pure stainless steel pure stainless steel 1) Busch-axcent® 1) Surface painted 98 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 kg ABB i-bus® KNX Operation – Room Temperature Controller A 12 Cover Plate for Temperature Controller, Commercial For room temperature controller, commercial. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6541-24 kg alpha ivory – 6541-22G 6599-0-2795 10 studio white, matt – 6541-24 6599-0-1557 10 studio white, high gloss – 6541-24G 6599-0-2332 10 platinum – 6541-20 6599-0-1466 10 – 6541-21 6599-0-1524 10 – 6541-260 6599-0-2853 10 – 6541-266 6599-0-2856 10 alpine white – 6541-74 6599-0-2076 10 champagne metallic – 6541-79 6599-0-2142 10 ivory – 6541-72 6599-0-2918 10 – 6541-774 6599-0-2971 10 – 6541-775 6599-0-2975 10 – 6541-777 6599-0-2933 10 – 6541-783 6599-0-2919 10 bronze 1) 1) palladium titanium 1) 1) impuls studio white matt black matt 2) blackberry 2) aluminium silver 2) 2) Real metal surface 2) Surface painted 1) Cover Plate for Temperature Controller, Commercial For room temperature controller, commercial. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg Busch-Duro 2000 SI 2114-212 white (SI-Series) – 2114-212 6599-0-1193 10 – 2114-214-500 6599-0-3008 10 Reflex SI alpine white (SI-Series) ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 99 ABB i-bus® KNX Operation – Millenium A 12 The new Millenium collection is the first metal range to incorage the KNX system, the most intelligent way of managing spaces and optimizing performance in terms of energy savings. Millenium is based on a combinable concept which creates a very comprehensive range, suitable for any types of needs. This makes it the ideal collection for all types of homes, hotels, offices and shops. Wide range. Millenium range offers special mounting plates for KNX sensors to reduce the height and improve the aesthetics for ultra slim design. The KNX sensors allow to replace the buttons with desired symbols in order to adjust the sensors to specific design and needs like light, blind, scene, RTC or fan coil. Millenium offers a wide and elegant choice of finishes in stainless steel material: from the Brush Stainless Steel, to the soft new touch given by the Silk Black, and the luxury of the sophisticated gold finishes, Matt Gold and Antique Gold. 01 Switch Sensor 2gang KNX 02 Switch Sensor 4gang KNX 03 Switch Sensor 6gang KNX 04Switch Sensor 6gang KNX with IR 05 Busch watchdog 180° KNX 06 Room Thermostat KNX 01 02 03 Function Switching | Dimming | Blinds | Sending values | Scenes etc. Function Switching | Dimming | Blinds | Sending values | Scenes etc. Function Switching | Dimming | Blinds | Sending values | Scenes etc. Features Incl. 10 logic channels (light scene actuator | sequence actuator | logic gates, etc.) Control element: Switch contacts Display elements: LED to indicate the function Features Incl. 10 logic channels (light scene actuator | sequence actuator | logic gates, etc.) Control element: Switch contacts Display elements: LED to indicate the function Features Incl. 10 logic channels (light scene actuator | sequence actuator | logic gates, etc.) Control element: Switch contacts Display elements: LED to indicate the function 100 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Millenium A 12 04 05 Function Switching | Dimming | Blinds | Sending values | Scenes etc. | 6gang sensor with IR. Features Incl. 10 logic channels (light scene actuator | sequence actuator | logic gates, etc.) Control element: Switch contacts Display elements: LED to indicate the function Function Movement sensor with up to four channels. Detection range: frontal: 6 m, lateral: 6 m Detection angle: 180 ° Brightness limit value: 5 Lux - 150 Lux Mounting height: 1.1 m 06 Function Control element with room thermostat function for triggering the heating, ventilation and fan-coil actuators. The controller is a thermostat for Fan Coil units in 2and 4-pipe systems and conventional heating or cooling systems. The fan stage can be switched manually or in automatic mode. The Millenium range is only available in the following countries: China, Dubai, India, Kuweit, Oman, Qatar, Saudi Arabia, Singapore, UAE and UK. Frames and special mounting plates for KNX sensores have to ordered by: ABB, S.A. Low Voltage Products-Niessen, Oiartzun / Spain www.abb.es/niessen Features Incl. 10 logic channels (light scene actuator | sequence actuator | logic gates, etc.) Switch contacts for operating mode selection and dial for setpoint or fan speed adjustment. Display elements: LCD showing operation modes. Protection class (Device): IP 20 Temperature range (Device): – 5 °C to 45 °C ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 101 ABB i-bus® KNX Operation – Millenium A 12 6125/20-981-500 2-fold sensor Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Control element: Switch contacts. Display elements: LED to indicate the function. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 53 mm x 44 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – AMD72053-AN kg 1 (6125/20-981-500) 6126/20-981-500 4-fold sensor Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Control element: Switch contacts. Display elements: LED to indicate the function. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 53 mm x 44 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – AMD74053-AN kg 1 (6126/20-981-500) 6129/20-981-500 6-fold sensor Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Control element: Switch contacts. Display elements: LED to indicate the function. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 53 mm x 44 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – AMD76053-AN kg 1 (6129/20-981-500) 6129/21-981-500 6-fold sensor with IR Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Control element: Switch contacts. Display elements: LED to indicate the function. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 53 mm x 44 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – AMD76153-AN (6129/21-981-500) 102 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg ABB i-bus® KNX Operation – Millenium 6122/20-981-500 A 12 Watchdog 180 flush mounted Movement sensor with up to four channels. Detection range: frontal: 6 m, lateral: 6 m. Detection angle: 180 °. Brightness limit value: 5 Lux – 150 Lux. Mounting height: 1.1 m Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 53 mm x 44 mm. Position for installation: vertical. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – AMD70153-AN kg 1 (6122/20-981-500) 6124/20-981-500 Room thermostat heating/cooling Fan Coil Control element with room thermostat function for triggering the heating, ventilation and fancoil actuators. The controller is a thermostat for Fan Coil units in 2- and 4-pipe systems and conventional heating or cooling systems. The fan stage can be switched manually or in automatic mode. Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Switch contacts for operating mode selection and dial for setpoint or fan speed adjustment. Display elements: LCD showing operation modes. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 53 mm x 44 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – AMD70053-AN kg 1 (6124/20-981-500) Buttons with symbols Buttons with symbols for Millenium control covers 1 / 2-gang, 2 / 4-gang, 3 / 6-gang and 3 / 6-gang with infrared. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. Ceiling light symbol – Blinds symbol – AM50701-GR kg 10 (6123/20-500) AM50702-GR 10 (6123/21-500) Scene symbol – AM50703-GR 10 (6123/22-500) Temperature symbol – AM50704-GR 10 (6123/23-500) Light symbol – AM50705-GR 10 (6123/24-500) Fan Coil symbol – AM50706-GR 10 (6123/26-500) ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 103 ABB i-bus® KNX Operation – Millenium A 12 Triple rocker / KNX frame 1 gang Frame includes metal mounting plate. Dimensions 86 x 86 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. Stainless Steel – AMD5153-ST 1 Silk Black – AMD5153-SB 1 Matt Gold – AMD5153-MG 1 Antique Gold – AMD5153-AG 1 kg Triple rocker / KNX frame 2 gang Frame includes metal mounting plate. Dimensions 86 x 147 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. Stainless Steel – AMD5253-ST kg 1 Silk Black – AMD5253-SB 1 Matt Gold – AMD5253-MG 1 Antique Gold – AMD5253-AG 1 Special metal mounting plate for KNX sensors Allows reduction height of KNX sensors to 1mm. Only for following items: AMD72053-AN, AMD74053-AN, AMD76053-AN, AMD76153-AN. Description MW Type Order code AMD5053 Price Pack Weight 1 pc. unit 1 pc. E pc. Special metal mounting – AMD5053 plate for KNX sensors 1 gang 104 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg A 12 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 105 ABB i-bus® KNX Operation – Zenit A 12 Zenit is based on a combinable concept which creates a very comprehensive range, suitable for any type of needs. Optimizing comfort, safety and efficiency of homes and buildings: Providing with complete comfort solutions to satisfy all type of needs and projects. Ensuring safety and protection of persons and goods. Saving energy by using only the amount of energy required. Zenit offers two different mounting plates for KNX sensors corresponding to different market standards: VDE and NEMA. 01 Switch Sensor 2gang KNX 01 02 03 Function Switching | Dimming | Blinds | Sending values | Scenes etc. Function Switching | Dimming | Blinds | Sending values | Scenes etc. Function Switching | Dimming | Blinds | Sending values | Scenes etc. Features Incl. 10 logic channels (light scene actuator | sequence actuator | logic gates, etc.) Control element: Switch contacts Display elements: LED to indicate the function Features Incl. 10 logic channels (light scene actuator | sequence actuator | logic gates, etc.) Control element: Switch contacts Display elements: LED to indicate the function Features Incl. 10 logic channels (light scene actuator | sequence actuator | logic gates, etc.) Control element: Switch contacts Display elements: LED to indicate the function 02 Switch Sensor 4gang KNX 03 Switch Sensor 6gang KNX 04Switch Sensor 6gang KNX with IR 05 Busch watchdog 180° KNX 06 Room Thermostat KNX 106 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Operation – Zenit A 12 04 05 Function Switching | Dimming | Blinds | Sending values | Scenes etc. | 6gang sensor with IR. Features Incl. 10 logic channels (light scene actuator | sequence actuator | logic gates, etc.) Control element: Switch contacts Display elements: LED to indicate the function Function Movement sensor with up to four channels. Detection range: frontal: 6 m, lateral: 6 m Detection angle: 180 ° Brightness limit value: 5 Lux - 150 Lux Mounting height: 1.1 m 06 Function Control element with room thermostat function for triggering the heating, ventilation and fan-coil actuators. The controller is a thermostat for Fan Coil units in 2and 4-pipe systems and conventional heating or cooling systems. The fan stage can be switched manually or in automatic mode. The Zenit VDE range is only available in the following countries: Spain, Portugal, Russia, France The Zenit NEMA range is only available in the following countries: Latin America, Australia, Thailand, Vietnam. Sensors, frames and special mounting plates for KNX sensores have to ordered by: ABB, S.A. Low Voltage Products-Niessen, Oiartzun / Spain www.abb.es/niessen Features Incl. 10 logic channels (light scene actuator | sequence actuator | logic gates, etc.) Switch contacts for operating mode selection and dial for setpoint or fan speed adjustment. Display elements: LCD showing operation modes. Protection class (Device): IP 20 Temperature range (Device): – 5 °C to 45 °C ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 107 ABB i-bus® KNX Operation – Zenit A 12 1/2-Fold sensor NEW Push switch function: switching / dimming / blind / sending values / scenes etc. Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Control element: Switch contacts. Display elements: LED to indicate the function. Description MW Type Order code 6125/98-509 Price Pack Weight 1 pc. unit 1 pc. E pc. – 6125/98-509 6115-0-0444 1 Cover Zenit 1/2 fold Cover Zenit 1/2 fold. Available in white (BL), antrachite (AN) and silver (PL). Description MW Type Order code NEW Price Pack Weight 1 pc. unit 1 pc. E pc. N2221.2 kg Cover Zenit 1/2 fold – white – N2221.2 BL 2CL0N222121 1 Cover Zenit 1/2 fold – antra- – N2221.2 AN 2CL0N222128 1 N2221.2 PL 2CL0N222123 1 kg chite Cover Zenit 1/2 fold – silver – 2/4 -Fold sensor NEW Push switch function: switching / dimming / blind / sending values / scenes etc. Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Control element: Switch contacts. Display elements: LED to indicate the function. Description MW Type Order code 6126/98-509 Price Pack Weight 1 pc. unit 1 pc. E pc. – 6126/98-509 6116-0-0219 1 Cover Zenit 2/4 fold Cover Zenit 2/4 fold. Available in white (BL), antrachite (AN) and silver (PL). Description MW Type Order code NEW Price Pack Weight 1 pc. unit 1 pc. E pc. N2221.4 Cover Zenit 2/4 fold – white – N2221.4 BL 2CL0N222141 1 Cover Zenit 2/4 fold – antra- – N2221.4 AN 2CL0N222148 1 N2221.4 PL 2CL0N222143 1 chite Cover Zenit 2/4 fold – silver – 108 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 kg kg ABB i-bus® KNX Operation – Zenit 3/6 -Fold sensor NEW Push switch function: switching / dimming / blind / sending values / scenes etc. Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.) Control element: Switch contacts. Display elements: LED to indicate the function. Protection class (Device): IP 20. Temperature range (Device): – 5 °C to 45 °C. Dimensions: (L x W x D): 44 mm x 44 mm. 6129/96-509 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6129/96-509 6118-0-0105 1 Cover Zenit 3/6 fold Cover Zenit 3/6 fold. Available in white (BL), antrachite (AN) and silver (PL). Description MW Type Order code NEW Price Pack Weight 1 pc. unit 1 pc. E pc. N2221.6 kg Cover Zenit 3/6 fold – white – N2221.6 BL 2CL0N222161 1 Cover Zenit 3/6 fold – antra- – N2221.6 AN 2CL0N222168 1 N2221.6 PL 2CL0N222163 1 kg chite Cover Zenit 3/6 fold – silver – 3/6 -Fold sensor with IR NEW Push switch function: switching / dimming / blind / sending values / scenes etc. Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.). With infrared. Control element: Switch contacts. Display elements: LED to indicate the function. Description MW Type Order code 6129/98-509 Price Pack Weight 1 pc. unit 1 pc. E pc. – 6129/98-509 6118-0-0108 1 Cover Zenit 3/6 fold with IR Cover Zenit 3/6 fold with IR. Available in white (BL), antrachite (AN) and silver (PL). Description MW Type Order code N2221.7 NEW Price Pack Weight 1 pc. unit 1 pc. E pc. Cover Zenit 3/6 fold kg – N2221.7 BL 2CL0N222171 1 – N2221.7 AN 2CL0N222178 1 – N2221.7 PL 2CL0N222173 1 kg with IR – white Cover Zenit 3/6 fold with IR – antrachite Cover Zenit 3/6 fold with IR – silver ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 109 A 12 ABB i-bus® KNX Operation – Zenit A 12 6124/98-509 Room thermostat heating / cooling Fan Coil NEW Control element with room thermostat function for triggering the heating, ventilation and fancoil actuators. The controller is a thermostat for Fan Coil units in 2 - and 4-pipe systems and conventional heating or cooling systems. The fan stage can be switched manually or in automatic mode. Incl. 10 logic channels (light scene actuator, sequence actuator, logic gates, etc.). Switch contacts for operating mode selection and dial for setpoint or fan speed adjustment. Display elements: LCD showing operation modes. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6124/98-509 6134-0-0297 Cover Zenit room thermostat Cover Zenit room thermostat. Available in white (BL), antrachite (AN) and silver (PL). Description MW Type Order code NEW Price Pack Weight 1 pc. unit 1 pc. E pc. N2240.4 kg 1 Cover Zenit RTC – white – N2240.4 BL 2CL0N224041 1 Cover Zenit RTC – antra- – N2240.4 AN 2CL0N224048 1 – N2240.4 PL 2CL0N224043 1 kg chite Cover Zenit RTC – silver Watchdog 180 flush mounted. NEW Movement sensor with up to four channels. Detection range: frontal: 6 m, lateral: 6 m. Detection angle: 180 °. Brightness limit value: 5 Lux – 150 Lux. Mounting height: 1.1 m. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6122/98-509 – 6122/98-509 6132-0-0307 1 Cover Zenit watchdog Cover Zenit watchdog. Available in white (BL), antrachite (AN) and silver (PL). Description MW Type Order code NEW Price Pack Weight 1 pc. unit 1 pc. E pc. N2241.4 Cover Zenit Watchdog – – N2241.4 BL 2CL0N224141 1 – N2241.4 AN 2CL0N224148 1 – N2241.4 PL 2CL0N224143 1 white Cover Zenit Watchdog – antrachite Cover Zenit Watchdog – silver 110 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 kg kg ABB i-bus® KNX Operation – Zenit Buttons with symbols Buttons with symbols for Zenit control covers 1 / 2-gang, 2 / 4-gang, 3 / 6-gang and 3 / 6-gang with infrared. Description MW Type Order code NEW Price Pack Weight 1 pc. unit 1 pc. E pc. Ceiling light symbol – 6123/20-500 6123-0-0001 10 Blinds symbol – 6123/21-500 6123-0-0002 10 Scene symbol – 6123/22-500 6123-0-0003 10 Temperature symbol – 6123/23-500 6123-0-0004 10 Light symbol – 6123/24-500 6123-0-0005 10 Fan Coil symbol – 6123/26-500 6123-0-0006 10 kg Frames, Zenit VDE Description NEW MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg 1 fold, Available in AN, BL, CB, CN, CV, OX, PL, PZ, WG* N2271 XX – N2271 XX – N2271.1 XX – N2272 XX – N2272.1 XX – N2273 XX – N2273.1 XX – N2274 XX – N2274.1 XX 1 fold basic (without logo), Available in AN, BL, CV, PL* 2 fold, Available in AN, BL, CB, CN, CV, OX, PL, PZ, WG* 2 fold basic (without logo), Available in AN, BL, CV,PL* 3 fold, Available in AN, BL, CB, CN, CV, OX, PL, PZ, WG* 3 fold basic (without logo), Available in AN, BL, CV,PL* 4 fold, Available in AN, BL, CB, CN, CV, OX, PL, PZ, WG* 4 fold basic (without logo), Available in AN, BL, CV,PL* Metal mounting plate Metal mounting plate for Zenit VDE KNX sensors. Description MW Type NEW Order code Price Pack Weight 1 pc. unit 1 pc. E pc. Metal mounting plate – N2271.9 kg 20 N2271.9 *A N = Antrachite, BL = white, CB = white glass, CN = black glass, CV = Cava, OX = Stainless Steel, PL = Silver, PZ = Slate , WG = Wenge ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 111 A 12 ABB i-bus® KNX Operation – Zenit A 12 Frame, Zenit NEMA Dimensions (L x W): 122 x 90 mm. Available in AN, BL, CB, CN, CV, OX, PL, PZ, WG*. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 1 fold – NEW kg N2372.1 XX N2372.1 XX Metal mounting plate Metal mounting plate for Zenit NEMA KNX sensors. Dimensions (L x W): 102 x 74 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. Metal mounting plate – N2371.9V NEW kg 20 N2371.9V *A N = Antrachite, BL = white, CB = white glass, CN = black glass, CV = Cava, OX = Stainless Steel, PL = Silver, PZ = Slate , WG = Wenge 112 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Energy measurement ABB offers various solutions for decentral energy measurement on the basis of the KNX standard. Information (KNX) Energie Version 1 Electronic energy meters make the current energy values available on the KNX bus system in conjunction with a KNX interface. The measured data can be intermediately stored, evaluated and visualized from here. Information (KNX) Energie + + Version 2 The Energy Module can record the energy consumption for the individual devices. It is used particularly when upgrading existing KNX systems and wherever energy measurement is required without switch functions. It facilitates a detailed and transparent insight into the energy consumption of a building. The current meter values can be sent and evaluated. Information (KNX) Energie + + Schaltaktor Energiemodul Version 3 The Energy Actuator facilitates control of the connected consumer loads via the ABB i-bus® KNX. For each of the three switch channels, the individual consumption can be measured in the same way as for the Energy Module. For every channel, the proven functionality of the ABB i-bus® KNX Switch Actuators are available. Information (KNX) Energie + + Information (KNX) Intermediate meter for electrical energy Energie Electrical consumer (load) Energy meter ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 113 A 13 ABB i-bus® KNX Energy measurement A 13 Energy Actuator, 3-fold, 16/20 AX, MDRC Records the energy consumption of the connected electrical loads in the load circuit. Various electrical variables can be monitored and load peaks can be limited by simple load control. The 3 output channels can be manually operated and display the current switching state. The Energy Actuator can switch resistive, inductive and capacitive loads The switching capacity corresponds to the SA/S X.16.6.1. Description MW Type Order code SE/S 3.16.1 4 SE/S 3.16.1 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 1 0.3 2CDG110136R0011 Energy Module, MDRC Measures energy consumption and various electrical parameters in the terminal current. Active power, Current, Voltage and Frequency can be monitored via threshold values and peak loads can be limited through a simple load control. The measured values are provided via ABB i-bus® KNX. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. EM/S 3.16.1 4 EM/S 3.16.1 E pc. kg 1 0.2 2CDG110148R0011 Meter Interface Module, MDRC It records consumption and measured values of the electrical energy consumption meters. Using an infra-red interface, the ABB energy meter types of the A- and B-series are incorporated. The information and data which is read can be used, for example, for cost centre accounting, energy optimisation, monitoring of installations and visualisation. ZS/S 1.1 The following values are available (depending on the meter type): Meter reading Active energy Reactive energy Tariff 1-4, total Tariff 1-4, total Power values Active power Reactive power Apparent power Phase angle power Power factor L1, L1, L1, L1, L1, Instrument values Voltages L1-N, L2-N, L3-N, L1-L2, L2-L3, L1-L3 Description L2, L2, L2, L2, L2, MW L3, L3, L3, L3, L3, total total total total total Type Currents Phase angle voltage Phase angle current Quadrant Mains frequency L1, L1, L1, L1, L2, L2, L2, L2, Other Transformer ratio Read Power failures Send TariffsRead over Status information Send Communication monitoring Intermediate meterRead Order code L3, L3, L3, L3, CT and VT and delete and change and read and reset Price Pack Weight 1 pc. unit 1 pc. E pc. – ZS/S 1.1 2CDG110083R0011 114 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 N total total total 1 kg 0.13 Electricity Meters Introduction Modular DIN rail products offer a wide range of functions to be integrated in electrical installations with significant benefits for the user. DIN rail mounted electricity meters are designed for high level performance and are safe and fast to install. The DIN rail mounted electricity meters are available in several models: the new EQ meters C11, B21, A41 and A42 for single phase metering, the new EQ meters C13, B23, B24, A43 and A44 for three phase metering. ABB Low Voltage Products The Low Voltage Products division manufactures low voltage circuit breakers, switches, control products, wiring accessories, enclosures and cable systems to protect people, installations and electronic equipment from electrical overload. The division further makes KNX systems that integrate and automate a building’s electrical installations, ventilation systems, and security and data communication networks. All these products help customers to save energy, improve productivity and increase safety. Global business The Low Voltage Products division is a global business producing mainly low-voltage electrical equipment that is sold to wholesalers, original equipment manufacturers as well as system integrators, and has moderate service requirements. ABB’s broad program of standardized products and components are the ‘building blocks’ of system solutions, incorporating functionalities that will allow seamless integration in real time automation and information systems. At the product level, all the low voltage products can operate together perfectly. To create a system solution, every product is equipped with the tools necessary to install, operate and maintain it efficiently throughout the product life cycle. The range of low voltage products is supported by technical documentation. This together with compact design makes it easier than ever to incorporate our products in your system. Our customers can find all product related documentation such as brochures, catalogues, selection program, certificates, drawings and other information directly at www.abb.com/lowvoltage ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 115 A 13 Electricity Meters Selection Guide A 13 How do I select the best meter for my application? There are many versions of EQ meters in order to meet your requests. The EQ program comprises meters with different functionalities such as tariffs, communication interfaces or advanced clock functions. Spend a little time to evaluate the functions and imagine how they could add extra value to your metering. For example, the input counter (from silver level) on an EQ meter can be used to count products produced by a machine and be read out together with the energy consumption of the same machine. In one easy go you can allocate energy to any produced product from one source. Another useful function is previous values (from gold level). If you charge users in intervals the meter can secure the data even in the event of a broken communication link. You can collect the correct interval data later and also make it visible for your counterpart immediately on the meters display in case of any discussions. Make the meter an asset. Take the step from passive meter reading to an active user of the data you can retrieve. The meter can be an important asset for you in order to avoid costs like penalties or extra charge for reactive energy (from bronze level). Keep track of your maximum demand and reduce them to avoid charges. EQ meters can tell you the value of the maximum demand and also when it occurred. Harmonics is the source of many problems for all sorts of equipment connected to the low voltage network. Use an EQ meter (platinum level) to measure the THD and isolate the source before you have to take the cost and consequences of poor power quality Single phase Function C11 B21 Direct connected Transformer connected 2 element metering 3 element metering 1 Accuracy 1%, Class 1, Class B Accuracy 0,5%, Class 0,5 S, Class C 1 Active energy Reactive energy Apparent energy Import/Export energy Tariff registers, 1-4 1 Instrument values Alarm function Harmonics, THD and no 2-16 1 1 2 3 1 1 1 2 3 1 1 2 3 1 2 3 1 2 Communication - Infrared (M-Bus) Communication - M-Bus Communication - RS-485 Modbus Communication - RS-485 EQ bus 4 3 1 2 3 4 C13 1 5 5 1 2 2 3 3 4 B23 2 3 1 2 3 1 2 3 1 2 1 1 2 3 1 2 1 1 2 3 1 2 5 4 B24 1 5 1 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 3 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 4 5 3 4 5 2 3 4 5 2 3 2 3 3 4 5 2 3 4 5 2 3 2 3 2 3 2 3 4 5 2 3 4 5 2 3 2 3 2 3 2 3 2 3 4 5 2 3 4 5 2 3 2 3 2 3 3 4 5 3 4 5 3 4 5 2 3 4 5 1 2 3 4 5 1 1 2 3 1 2 3 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 1 2 3 1 2 3 1 2 3 4 5 1 2 1 1 1 3 1 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 4 5 2 3 4 5 4 5 2 3 4 5 3 4 5 2 3 4 5 2 3 4 5 3 1 5 5 5 4 5 4 5 4 5 4 4 5 4 5 4 5 4 2 5 1 3 1 3 3 3 2 4 5 1 3 1 2 4 1 2 3 1 2 3 5 5 5 1 3 2 4 3 4 5 5 5 3 3 4 5 3 4 5 3 3 3 4 5 3 4 5 3 3 4 5 3 4 5 3 3 3 4 5 3 4 5 4 5 4 5 4 5 4 5 1 2 3 1 2 3 4 5 1 2 3 4 5 1 2 3 1 2 3 4 5 1 2 3 4 5 2 3 1 2 3 4 5 1 2 3 4 5 1 1 3 2 5 optional 5 2 3 1 4 3 5 1 3 3 5 1 A44 2 2 3 1 A43 1 2 Tariffs controlled by input Tariffs controlled by communication Tariffs controlled by clock MID approved, verified IEC approved A42 1 Previous values - day, week, month Max and min demand Load profiles - 8 channels Pulse output I/O board - 2 in, 2 out Configurable I/O - 4 I/O channels Three phase A41 optional optional optional optional optional optional optional optional optional optional 1 1 2 3 1 2 3 1 2 3 4 5 1 2 3 4 5 1 2 3 1 2 3 1 2 3 4 5 1 2 3 4 5 2 3 1 2 3 1 2 3 4 5 1 2 3 4 5 1 optional optional optional optional optional optional = Steel = Bronze 3 = Silver 4 = Gold 5 = Platinum = Not available Optional = Available on some order codes 1 2 116 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 optional optional optional optional optional optional Electricity Meters Selection Guide Connection of EQ meters There are both one phase and three phase meters in the program. When the current exceeds the maximum current for a direct connected meter, a meter can be used from A or B series with current transformers (CT’s). If the voltage is outside the specification of the meter you can use an A series meter with voltage transformers (VT’s). Please note that three phase meters in A and B series can be configured to be used in three or four wire applications. C, B and A series C11 Direct 40A - Connection Max Amp Communication Functionality 1 = Steel = Bronze 3 = Silver 4 = Gold 5 = Platinum - = Not available Optional = Available on some order codes 1 2 Single phase B21 A41 Direct Direct 65A 80A IR, M-Bus, IR, M-Bus, RS-485 RS-485 1 2 3 1 2 3 4 5 A42 CTVT 6A*) IR, M-Bus, RS-485 1 2 3 4 5 C13 Direct 40A 1 B23 Direct 65A IR, M-Bus, RS-485 1 2 3 Three phase B24 A43 CT Direct ) 6A* 80A IR, M-Bus, IR, M-Bus, RS-485 RS-485 1 2 3 1 2 3 4 5 A44 CTVT 6A*) IR, M-Bus, RS-485 1 2 3 4 5 * 6A is the secondary current of a connected current transformer used in cases with currents exceeding the max current for direct connected meters. ) ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 117 A 13 Electricity Meters A Series – Product brief A 13 Key applications • Applications in industry • Applications in commercial buildings • Object metering • Billing applications Meter performance • Three phase and single phase • Direct connected up to 80 A • Transformer connected 1, 2 or 5 A • Active or active and reactive energy •Accuracy class C, B or A (Cl. 0,5 S, 1 or 2) •Import or import and export measurement of energy • Wide voltage range (100 – 500 V) • Pixel-oriented display • Up to 4 tariffs • Up to 4 inputs and outputs • Low power consumption •Optional clock functionality with tariff control, previous values, max/min demand, load profiles •Harmonics measurement up to 16th harmonic and THD evaluation Communication • Pulse output • Built-in M-Bus •Built-in RS-485 for Modbus RTU and EQ bus •IR port for Serial Communication Adapters Installation •Terminal according to DIN 43857 (“Utility terminal”) • Wide temperature range •Sealable push buttons for configuration Approvals • MID type approval “annex B” • MID initial verification “annex D” • IEC type approval 118 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Electricity Meters A Series – Description A 13 The A series EQ meters are meters for single phase and three phase metering. The A series meters are mounted on a DIN rail and are suitable for installation in distribution boards and small enclosures such as consumer units. With the main terminals in accordance with DIN 43857 and accessible from the below the meters, the A series is suitable for many applications. General features The A series meters are ideal for many applications and installations. The meters support a wide voltage range as well as a wide temperature range. The display is pixel-oriented and can display up to four quantities at the same time. Navigating the meter is easily done via the push-buttons below the display. To configure the meter settings, the set button must be accessed and this button is protected against unauthorized use when the “glass lid” on the front of the meter is closed and sealed. The power consumption of the meter is very low, less than 0.8 VA. Communication Data from the A series meters can be collected via pulse output or serial communication. The pulse output is a solid state relay that generates pulses proportionally to the measured energy. The meters can also be equipped with built-in serial communication interfaces for M-Bus or Modbus RTU (RS485). Meters with RS-485 interface can also be set to communicate over the new EQ bus with the new gateway G13. All meters in the A series come with an infrared port for communication with an external Serial Communication Adapter (SCA) such as the KNX adapter. Instrumentation The A series meters support reading of instrument values. A large number of electrical properties can be read. Depending on version of the meter the following data is available: • Active power • Apparent power • Reactive power • Current • Voltage • Frequency • Power factor • Harmonics • Total harmonic distortion Inputs and outputs The A series support up to four I/O’s. It can be two inputs and two outputs in a fixed configuration or four I/O points that are freely configured to input or output. Inputs can be used for counting pulses from e.g. a water meter, or reading status from external devices. Outputs can be used as pulse outputs or controlling external apparatus like a contactor or an alarm (connected via an external relay). Outputs need an external voltage supply. Approvals The A series meters are type approved according to IEC and they are both type approved and verified according to MID. MID is the Measuring Instruments Directive 2004/22/EC from the European Commission. MID type approval and verification is mandatory for meters in billing applications within EU and EEA. The type approval is according to standards that covers all relevant technical aspects of the meter. These include climate conditions, electromagnetic compatibility (EMC), electrical requirements, mechanical requirements and accuracy. Tariffs The tariffs are controlled via inputs, via communication or via an internal clock. Event log Gold and Platinum meters have an event log function. The event log will log overvoltage, undervoltage, phase voltage outage, negative power, total power outage and presence of harmonics. Optional functionality A series meters with a functionality level of Gold or Platinum have an internal clock for advanced functionality. The clock functions are briefly presented below. ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 119 Electricity Meters A Series – Description A 13 Internal clock The internal clock, sometimes called real time clock or RTC, has a built-in calendar and automatically keeps track of leap year and daylight savings time (DST). The DST function is optional. Backup of the clock during a power failure is provided by a supercapacitor. The time is controlled by a quartz crystal based clock. Time and date is set via push buttons or via communication. The internal clock is approved according to IEC 62052-21 and IEC 62054-21. These standards specify the requirements for time switches in electricity meter related products. The accuracy is better than 5 ppm at room temperature. Previous values The previous value feature is available on Gold and Platinum meters and will store all energy registers and input counter values together with a date/time stamp upon change of day, week or month. All total values are stored and in meters equipped with the tariff feature all the tariff registers will also be stored. Maximum and minimum demand The demand function is available on Gold and Platinum meters. In the demand function, the mean power in each interval is measured and the maximum and minimum mean values are stored together with a date/time stamp. For each set of demand values the end date/time of the period is stored. The quantities that can be stored for each interval are active, reactive and apparent power (imported power only), and the number of pulses registered on inputs. Load profile The load profile function is available on the Platinum meters. The load profile stores the energy consumption at pre-defined intervals. The quantities that can be stored for each interval are active and reactive energy, both imported and exported energy, and the number of pulses registered on inputs. The load profile function uses the standard time setting irrespective if the daylight savings time function is activated or not. THD The THD and harmonics measurement is available on the Platinum meters. The voltage and current harmonics (2-16) together with the fundamental is measured sequentially one at a time. The total harmonic distortion is evaluated and displayed in percent. The separate harmonic frequencies measured are multiples of the fundamental frequency up to the 16th harmonic. THD data as well as individual harmonics are shown on the display. THD data and data for individual harmonics can also be read out via serial communication. 120 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Electricity Meters A41 – Single phase meter 80A, 4 DIN with IR port 2CMC484003F0001 Description Direct connected electricity meter. Verified and approved according to MID. IEC approval. Instrument values. Alarm function. Communication - Infrared (M-Bus). Optional - Communication with M-Bus, RS-485 Modbus, RS-485 EQ bus. A41 Ordering details Voltage V Accuracy Class I/O Communi- Type cation Order Code Pkg Weight qty 1 pc Pulse output – A41 111 - 100 2CMA170554R1000 1 0.23 RS-485 A41 112 - 100 2CMA170500R1000 1 0.23 M-Bus A41 113 - 100 2CMA100240R1000 1 0.23 RS-485 A41 212 - 100 2CMA170501R1000 1 0.23 A41 311 - 100 2CMA170502R1000 1 0.23 RS-485 A41 312 - 100 2CMA170503R1000 1 0.23 M-Bus A41 313 - 100 2CMA170504R1000 1 0.23 A41 412 - 100 2CMA170505R1000 1 0.23 A41 413 - 100 2CMA170506R1000 1 0.23 Steel Active energy 57.7...288 V AC Class B (Cl. 1) Bronze Active and reactive energy, import/export. 57.7...288 V AC Class B (Cl. 1) Reactive Cl. 2 Pulse output Silver Active and reactive energy, import/export, tariffs 1-4, tariff control via inputs and communication. 57.7...288 V AC Class B (Cl. 1) Reactive Cl. 2 2 output, 2 input – Gold Active and reactive energy, import/export, tariffs 1-4, tariff controlled via inputs, communication or clock, previous values, max and min demand. 57.7...288 V AC Class B (Cl. 1) Reactive Cl. 2 2 output, 2 input RS-485 M-Bus Platinum Active and reactive energy, import/export, tariffs 1-4, tariff controlled via inputs, communication or clock, previous values, max and min demand, advanced load profiles, harmonics and THD. 57.7...288 V AC Class B (Cl. 1) Reactive Cl. 2 Configurable 4 I/O channels RS-485 A41 512 - 100 2CMA100237R1000 1 0.23 M-Bus A41 513 - 100 2CMA170508R1000 1 0.23 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 121 A 13 Electricity Meters A42 – Single phase meter 6A, 4 DIN with IR port A 13 2CMC484005F0001 Description Transformer CTVT connected electricity meter. Verified and approved according to MID. IEC approval. Voltage V - 57...288 V AC. Instrument values. Alarm function. Communication Infrared (M-Bus). Optional - Communication with M-Bus, RS-485 Modbus, RS-485 EQ bus. A42 Ordering details Voltage V Accuracy Class I/O Communi- Type cation Order Code Pkg Weight qty 1 pc Pulse output – A42 111 - 100 2CMA170555R1000 1 0.20 RS-485 A42 112 - 100 2CMA170510R1000 1 0.20 M-Bus A42 113 - 100 2CMA100242R1000 1 0.20 RS-485 A42 212 - 100 2CMA170511R1000 1 0.20 1 0.20 A42 412 - 100 2CMA170513R1000 1 0.20 A42 413 - 100 2CMA170514R1000 1 0.20 Steel Active energy 57.7...288 V AC Class B (Cl. 1) Bronze Active and reactive energy, import/export. 57.7...288 V AC Class B (Cl. 1) Reactive Cl. 2 Pulse output Silver Active and reactive energy, import/export, tariffs 1-4, tariff control via inputs and communication. 57.7...288 V AC Class B (Cl. 1) Reactive Cl. 2 2 output, 2 input RS-485 A42 312 - 100 2CMA170512R1000 Gold Active and reactive energy, import/export, tariffs 1-4, tariff controlled via inputs, communication or clock, previous values, max and min demand. 57.7...288 V AC Class B (Cl. 1) Reactive Cl. 2 2 output, 2 input RS-485 M-Bus Platinum Active and reactive energy, import/export, tariffs 1-4, tariff controlled via inputs, communication or clock, previous values, max and min demand, advanced load profiles, harmonics and THD. 57.7...288 V AC Class C (Cl. 0,5 S) Configurable Reactive Cl. 2 4 I/O channels RS-485 A42 552 - 100 2CMA100238R1000 1 0.20 M-Bus A42 553 - 100 2CMA170516R1000 1 0.20 122 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Electricity Meters A43 – Three phase meter 80A, 7 DIN with IR port A 13 2CMC484004F0001 Description Direct connected electricity meter. Verified and approved according to MID. IEC approval. 2- and 3-element metering. Instrument values. Alarm function. Communication - Infrared (M-Bus). Optional - Communication with M-Bus, RS-485 Modbus, RS-485 EQ bus. A43 Ordering details Voltage V Accuracy Class I/O Communi- Type cation Pulse output – RS-485 Order Code Pkg qty Weight 1 pc A43 111 - 100 2CMA170520R1000 1 0.44 A43 112 - 100 2CMA100244R1000 1 0.44 M-Bus A43 113 - 100 2CMA100245R1000 1 0.44 – A43 121 - 100 2CMA170521R1000 1 0.44 – A43 211 - 100 2CMA100012R1000 1 0.44 RS-485 A43 212 - 100 2CMA170522R1000 1 0.44 M-Bus A43 213 - 100 2CMA170523R1000 1 0.44 Steel Active energy 3 x 57.7/100... Class B (Cl. 1) 288/500 V AC Class A (Cl. 2) Bronze Active and reactive energy, import/export. 3 x 57.7/100... Class B (Cl. 1) 288/500 V AC Reactive Cl. 2 Pulse output Silver Active and reactive energy, import/export, tariffs 1-4, tariff control via inputs and communication. 3 x 57.7/100... Class B (Cl. 1) 288/500 V AC Reactive Cl. 2 2 output, 2 input – A43 311 - 100 2CMA170524R1000 1 0.44 RS-485 A43 312 - 100 2CMA170525R1000 1 0.44 M-Bus A43 313 - 100 2CMA170526R1000 1 0.44 A43 412 - 100 2CMA170528R1000 1 0.44 A43 413 - 100 2CMA170529R1000 1 0.44 Gold Active and reactive energy, import/export, tariffs 1-4, tariff controlled via inputs, communication or clock, previous values, max and min demand. 3 x 57.7/100... Class B (Cl. 1) 288/500 V AC Reactive Cl. 2 2 output, 2 input RS-485 M-Bus Platinum Active and reactive energy, import/export, tariffs 1-4, tariff controlled via inputs, communication or clock, previous values, max and min demand, advanced load profiles, harmonics and THD. 3 x57.7/100... 288/500 V AC Class B (Cl. 1) Reactive Cl. 2 Configurable 4 I/O channels – A43 511 - 100 2CMA100143R1000 1 0.44 RS-485 A43 512 - 100 2CMA170531R1000 1 0.44 M-Bus A43 513 - 100 2CMA170532R1000 1 0.44 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 123 Electricity Meters A44 – Three phase meter 6A, 7 DIN with IR port A 13 2CMC484006F0001 Description Transformer CTVT connected electricity meter. Verified and approved according to MID. IEC approval. 2- and 3-element metering. Instrument values. Alarm function. Communication Infrared (M-Bus). Optional - Communication with M-Bus, RS-485 Modbus, RS-485 EQ bus. A44 Ordering details Voltage V Accuracy Class I/O Communi- Type cation Order Code Pkg Weight qty 1 pc Pulse output – A44 111 - 100 2CMA170533R1000 1 0.35 RS-485 A44 112 - 100 2CMA100248R1000 1 0.35 M-Bus A44 113 - 100 2CMA100249R1000 1 0.35 – A44 211 - 100 2CMA100013R1000 1 0.35 RS-485 A44 212 - 100 2CMA170534R1000 1 0.35 M-Bus A44 213 - 100 2CMA170535R1000 1 0.35 A44 311 - 100 2CMA170536R1000 1 0.35 RS-485 A44 352 - 100 2CMA170537R1000 1 0.35 M-Bus A44 353 - 100 2CMA170538R1000 1 0.35 A44 452 - 100 2CMA170540R1000 1 0.35 A44 453 - 100 2CMA170541R1000 1 0.35 Steel Active energy 3 x 57.7/100... Class B (Cl. 1) 288/500 V AC Bronze Active and reactive energy, import/export. 3 x 57.7/100... Class B (Cl. 1) 288/500 V AC Reactive Cl. 2 Pulse output Silver Active and reactive energy, import/export, tariffs 1-4, tariff control via inputs and communication. 3 x 57.7/100... Class B (Cl. 1) 288/500 V AC Reactive Cl. 2 2 output, 2 input – Class C (Cl. 0,5 S) Reactive Cl. 2 Gold Active and reactive energy, import/export, tariffs 1-4, tariff controlled via inputs, communication or clock, previous values, max and min demand. 3 x 57.7/100... Class C (Cl. 0,5 S) 2 output, 2 input RS-485 288/500 V AC Reactive Cl. 2 M-Bus Platinum Active and reactive energy, import/export, tariffs 1-4, tariff controlled via inputs, communication or clock, previous values, max and min demand, advanced load profiles, harmonics and THD. 3 x 57.7/100... Class C (Cl. 0,5 S) Configurable 288/500 V AC Reactive Cl. 2 4 I/O channels RS-485 A44 552 - 100 2CMA170545R1000 1 0.35 M-Bus A44 553 - 100 2CMA170546R1000 1 0.35 124 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Electricity Meters A series – Technical data A41 Voltage/current inputs Nominal voltage Voltage range Power dissipation voltage circuits Power dissipation current circuits 230 V AC 57.7 - 288 V AC (-20% - +15%) 0.8 VA (0.8 W) total 0.007 VA (0.007 W) at 230 VAC and Ib 5A – 5A 0.5 A 80 A 0.25 A < 20 mA 1 - 25 mm2 3 Nm Base current Ib Rated current In Reference current Iref Transitional current Itr Maximum current Imax Minimum current Imin Starting current Ist Terminal wire area Recommended tightening torque Communication Terminal wire area Recommended tightening torque Transformer ratios Configurable voltage ratio (VT) Configurable current ratio (CT) Pulse indicator (LED) Pulse frequency Pulse length General data Frequency Accuracy Class A44 0.001 VA (0.001 W) at 230 VAC and In – 1A – 0.05 A 6A 0.02 A < 1 mA 0.5 - 10 mm2 1.5 Nm 0.007 VA (0.007 W) per phase at 230 VAC and Ib 5A – 5A 0.5 A 80 A 0.25 A < 20 mA 1 - 25 mm2 3 Nm 0.001 VA (0.001 W) per phase at 230 VAC and In – 1A – 0.05 A 6A 0.01 A < 1 mA 0.5 - 10 mm2 1.5 Nm 0.5 - 1 mm2 – – 1/999 - 999999/1 1/9 - 9999/1 – – 1/999 - 999999/1 1/9 - 9999/1 1000 imp/kWh 40 ms 5000 imp/kWh 40 ms 1000 imp/kWh 40 ms 5000 imp/kWh 40 ms 50 or 60 Hz ± 5% B (Cl.1) or Reactive Cl. 2 Mechanical Material Dimensions Width Height Depth DIN modules A43 3x230/400 V AC 3x57.7/100 ... 288/500 V AC (-20% - +15%) 0.5 - 1 mm2 0.25 Nm Active energy Display of energy Environmental Operating temperature Storage temperature Humidity Resistance to fire and heat Resistance to water and dust Mechanical environment Electromagnetic environment Outputs Current Voltage Pulse output frequency Pulse length Terminal wire area Recommended tightening torque Inputs Voltage OFF ON Min. pulse length Terminal wire area Recommended tightening torque EMC compatibility Impulse voltage test Surge voltage test Fast transient burst test Immunity to electromagnetic HF-fields Immunity to conducted disturbance Immunity to disturbance with harmonics Radio frequency emission Electrostatic discharge Standards *) A42 1% Pixel oriented B (Cl.1), C (Cl. 0,5 S) or Reactive A (Cl.2), B (Cl.1) or Reactive Cl. 2 B (Cl.1), C (Cl. 0,5 S) or Reactive Cl. 2 Cl. 2 0.5%, 1% 1%, 2% 0.5%, 1% – 40 °C - + 70 °C – 40 °C - + 85 °C 75% yearly average, 95% on 30 days/year Terminal 960 °C, cover 650 °C (IEC 60695-2-1) IP20 on terminal block without protective enclosure and IP51 in protective enclosure, according to IEC 60529. Class M1 in accordance with the Measuring Instrument Directive (MID). (2004/22/EC). Class E2 in accordance with the Measuring Instrument Directive (MID), (2004/22/EC). 2 - 100 mA 5 - 240 V AC/DC. For meters with only 1 output, 5 - 40 V DC. Programmable: 1 - 999999 imp/kWh Programmable: 10 - 990 ms 0.5 - 1 mm2 0.25 Nm 0 - 240 V AC/DC 0 - 12 V AC/DC 57-240 V AC/24 - 240 V DC 30 ms 0.5 - 1 mm2 0.25 Nm 6 kV 1.2/50 µs (IEC 60060-1) 4 kV 1.2/50 µs (IEC 61000-4-5) 4 kV (IEC 61000-4-4) 80 MHz - 2 GHz at 10 V/m (IEC 61000-4-3) 150 kHz - 80 MHz, (IEC 61000-4-6) 2kHz - 150kHz EN 55022, class B (CISPR22) 15 kV (IEC 61000-4-2) IEC 62052-11, IEC 62053-21 class 1 & 2, IEC 62053-22 class 0,5 S, IEC 62053-23 class 2, IEC 62054-21, GB/T 17215.211-2006, GBT 17215.321-2008 class 1 & 2, GB/T 17215.322-2008 class 0,5 S, GB 4208-2008, EN 50470-1, EN 50470-3 category A, B & C Polycarbonate in transparent front glass, bottom case, upper case and terminal cover, Glass reinforced polycarbonate in terminal block. 70 mm 97 mm 65 mm 4 123 mm 97 mm 65 mm 7 Only A44 552 - 110 and A44 553 - 110 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 125 A 13 Electricity Meters B series – Product brief A 13 Key applications • Applications in commercial buildings • Object metering Installation • Wide temperature range • Easy configuration Meter performance • Single phase and three phase • Direct connected up to 65 A • Active or active and reactive energy • Import or import and export of energy • Accuracy class B (Cl. 1) or C (Cl. 0,5 S) • Low power consumption • Transformer connected 1, 2 or 5 A • Up to 4 tariffs • Alarm function Approvals • MID type approval “annex B” • MID initial verification “annex D” • IEC type approval Communication • Pulse output • IR port for serial communication adapter • Built-in M-Bus • Built-in RS-485 for Modbus RTU or EQ bus 126 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Electricity Meters B series – Description A 13 The B series EQ meters are meters for single phase and three phase metering. The B series meters are mounted on a DIN rail and are suitable for installation in distribution boards and small enclosures such as consumer units. The B series are suitable in applications where there is a need for reliable energy measurements and where space is limited. General features The B series meters are high runner meters for many applications and installations. Navigating the meter is easily done via the push-buttons below the display. To configure the meter settings, the set button must be accessed and this button is protected against unauthorized use when the “glass lid” on the front of the meter is closed and sealed. The power consumption of the meter is very low, less than 0.8 VA. Communication Data from the B series meters can be collected via pulse output or serial communication. The pulse output is a solid state relay that generates pulses proportionally to the measured energy. The meters can also be equipped with built-in serial communication interfaces for M-Bus or Modbus RTU (RS-485). Meters with RS-485 interface can also be set to communicate over the new EQ bus with the new gateway G13. All meters in the B series come with an infrared port for communication with an external Serial Communication Adapter (SCA) such as the KNX adapter. Instrumentation The B series meters support reading of instrument values. A large number of electrical properties can be read. Depending on version of the meter the following data is available: • • • • • • • Active power Apparent power Reactive power Current Voltage Frequency Power factor Inputs and outputs The B series support two inputs and two outputs in a fixed configuration. Inputs can be used for counting pulses from e.g. a water meter, or reading status from external devices. Outputs can be used as pulse outputs or controlling external apparatus like a contactor or an alarm (connected via an external relay). Approvals The B series meters are type approved according to IEC and they are both type approved and verified according to MID. MID is the Measuring Instruments Directive 2004/22/EC from the European Commission. MID type approval and verification is mandatory for meters in billing applications within EU and EEA. The type approval is according to standards that covers all relevant technical aspects of the meter. These include climate conditions, electromagnetic compatibility (EMC), electrical requirements, mechanical requirements and accuracy. Tariffs The tariffs are controlled via inputs or communication. ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 127 Electricity Meters B21 – Single phase meter 65A, 2 DIN with IR port A 13 2CMC485003F0001 Description Direct connected electricity meter. Verified and approved according to MID. IEC approval. Instrument values. Alarm function. - Communication - Infrared (M-Bus). Optional - Communication with M-Bus, RS-485 Modbus, RS-485 EQ bus. B21 Ordering details Voltage V Accuracy Class I/O Communi- Type cation Order Code Pkg Weight qty 1 pc Steel Active energy 1 x 230 V AC Class B (Cl. 1) Pulse output – B21 111 - 100 2CMA100149R1000 1 0,14 RS-485 B21 112 - 100 2CMA100150R1000 1 0,15 M-Bus B21 113 - 100 2CMA100151R1000 1 0,15 RS-485 B21 212 - 100 2CMA100152R1000 1 0,15 B21 311 - 100 2CMA100154R1000 1 0,14 B21 312 - 100 2CMA100155R1000 1 0,15 B21 313 - 100 2CMA100156R1000 1 0,15 Bronze Active and reactive energy, import/export. 1 x 230 V AC Class B (Cl. 1) Pulse output Reactive Cl. 2 Silver Active and reactive energy, import/export, tariffs 1-4, tariff control via inputs and communication. 1 x 230 V AC Class B (Cl. 1) 2 output, 2 input – Reactive Cl. 2 RS-485 M-Bus 128 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 2CMC485001F0201 Electricity Meters B23 – Three phase meter 65A, 4 DIN with IR port B23 Description Direct connected electricity meter. Verified and approved according to MID. IEC approval. 2- and 3-element metering. Instrument values. Alarm function. Communication - Infrared (M-Bus). Optional - Communication with M-Bus, RS-485 Modbus, RS-485 EQ bus. Ordering details Voltage V Accuracy Class I/O Communi- Type cation Class B (Cl. 1) Pulse output – Order Code Pkg qty Weight 1 pc B23 111 - 100 2CMA100163R1000 1 0.31 RS-485 B23 112 - 100 2CMA100164R1000 1 0.32 M-Bus B23 113 - 100 2CMA100165R1000 1 0.33 RS-485 B23 212 - 100 2CMA100166R1000 1 0.32 B23 311 - 100 2CMA100168R1000 1 0.33 RS-485 B23 312 - 100 2CMA100169R1000 1 0.34 M-Bus B23 313 - 100 2CMA100170R1000 1 0.35 Steel Active energy 3 x 230/400 V AC Bronze Active and reactive energy, import/export. 3 x 230/400 V AC Class B (Cl. 1) Reactive Cl. 2 Pulse output Silver Active and reactive energy, import/export, tariffs 1-4, tariff control via inputs and communication. 3 x 230/400 V AC Class B (Cl. 1) Reactive Cl. 2 2 output, 2 input – ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 129 A 13 Electricity Meters B24 – Three phase meter 6A, 4 DIN with IR port A 13 2CMC485002F0001 Description Transformer CT connected electricity meter. Verified and approved according to MID. IEC approval. 2- and 3-element metering. Instrument values. Alarm function. Communication Infrared (M-Bus). Optional - Communication with M-Bus, RS-485 Modbus, RS-485 EQ bus. B24 Ordering details Voltage V Accuracy Class I/O Communi- Type cation Order Code Pkg Weight qty 1 pc Class B (Cl. 1) Pulse output – B24 111 - 100 2CMA100177R1000 1 0.25 RS-485 B24 112 - 100 2CMA100178R1000 1 0.25 M-Bus B24 113 - 100 2CMA100179R1000 1 0.27 RS-485 B24 212 - 100 2CMA100180R1000 1 0.25 B24 351 - 100 2CMA100182R1000 1 0.27 B24 352 - 100 2CMA100183R1000 1 0.27 B24 353 - 100 2CMA100184R1000 1 0.29 Steel Active energy 3 x 230/400 V AC Bronze Active and reactive energy, import/export. 3 x 230/400 V AC Class B (Cl. 1) Reactive Cl. 2 Pulse output Silver Active and reactive energy, import/export, tariffs 1-4, tariff control via inputs and communication. 3 x 230/400 V AC Class C (Cl. 0,5 S) 2 output, 2 input – Reactive Cl. 2 RS-485 M-Bus 130 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Electricity Meters B series – Technical data Voltage/current inputs Nominal voltage Voltage range Power dissipation voltage circuits Power dissipation current circuits Base current Ib Rated current In Reference current Iref Transitional current Itr Maximum current Imax Minimum current Imin Starting current Ist Terminal wire area Recommended tightening torque Communication Terminal wire area Recommended tightening torque Transformer ratios Configurable current ratio (CT) Pulse indicator (LED) Pulse frequency Pulse length General data Frequency Accuracy Class Active energy Display of energy Environmental Operating temperature Storage temperature Humidity Resistance to fire and heat Resistance to water and dust Mechanical environment Electromagnetic environment Outputs Current Voltage Pulse output frequency Pulse length Terminal wire area Recommended tightening torque Inputs Voltage OFF ON Min. pulse length Terminal wire area Recommended tightening torque EMC compatibility Impulse voltage test Surge voltage test Fast transient burst test Immunity to electromagnetic HF-fields Immunity to conducted disturbance Immunity to disturbance with harmonics Radio frequency emission Electrostatic discharge Standards Mechanical Material Dimensions Width Height Depth DIN modules B21 B23 B24 230 V AC 220-240 VAC (-20% - +15%) 0.9 VA (0,4 W) total 0.014 VA (0.014 W) at 230 V AC and Ib 5A – 5A 0.5 A 65 A 0.25 A < 20 mA 1 - 25 mm2 3 Nm 3x230/400 V AC 3x220-240 VAC (-20% - +15%) 1.6 VA (0,7 W) total 0.007 VA (0.007 W) per phase at 230 V AC and Ib – 1A – 0.05 A 6A 0.02 A < 1 mA 0.5 - 10 mm2 1.5 Nm 0.5 - 1 mm2 0.25 Nm – 1/9 - 9999/1 1000 imp/kWh 40 ms 1000 imp/kWh 40 ms 5000 imp/kWh 40 ms 50 or 60 Hz ± 5% B (Cl. 1) and Reactive Cl. 2 1% 6 digit LCD B (Cl. 1) and Reactive Cl. 2 1% 7 digit LCD B (Cl. 1) or C (Cl. 0,5 S) and Reactive Cl. 2 0.5%, 1% – 40 °C - + 70 °C – 40 °C - + 85 °C 75% yearly average, 95% on 30 days/year Terminal 960 °C, cover 650 °C (IEC 60695-2-1) IP20 on terminal block without protective enclosure and IP51 in protective enclosure, according to IEC 60529. Class M1 in accordance with the Measuring Instrument Directive (MID). (2004/22/EC). Class E2 in accordance with the Measuring Instrument Directive (MID), (2004/22/EC). 2 - 100 mA 5 - 240 V AC/DC. For meters with only 1 output 5 - 40 VDC. Programmable: 1 - 999999 imp/kWh Programmable: 10 - 990 ms 0.5 - 1 mm 2 0.25 Nm 0 - 240 V AC/DC 0 - 12 V AC/DC 57 - 240 V AC/24 - 240 V DC 30 ms 0.5 - 1 mm2 0.25 Nm 6 kV 1.2/50μs (IEC 60060-1) 4 kV 1.2/50μs (IEC 61000-4-5) 4kV (IEC 61000-4-4) 80 MHz - 2 GHz (IEC 61000-4-6) 150kHz - 80MHz (IEC 61000-4-6) 2kHz - 150kHz EN 55022, class B (CISPR22) 15 kV (IEC 61000-4-2) IEC 62052-11, IEC 62053-21 class 1 & 2, IEC 62053-22 class 0,5 S, IEC 62053-23 class 2, IEC 62054-21, GB/T 17215.211-2006, GB/T 17215.312-2008 class 1 & 2, GB/T 17215.322-2008 class 0,5 S, GB 4208-2008, EN 50470-1, EN 50470-3 category A, B & C Polycarbonate in transparent front glass. Glass reinforced polycarbonate in bottom case and upper case. Polycarbonate in terminal cover. 35 mm 97 mm 65 mm 2 70 mm 97 mm 65 mm 4 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 131 A 13 Electricity Meters C series – Product brief A 13 Key applications • Landlord sub-metering • Object metering Meter performance • Direct connected up to 40 A • Active energy • Low power consumption • Alarm function Installation • Small size - 1 DIN (single phase) or 3 DIN (three phase) modules width • Wide temperature range • Easy configuration Approvals • MID type approval “annex B” • MID initial verification “annex F” • IEC type approval Communication • Pulse output 132 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Electricity Meters C series – Description A 13 The EQ meters, C series are truly compact meters for single phase and three phase metering. The C series is mounted on a DIN rail and is suitable for installation in distribution boards and small consumer units. General features Only one module wide, the C series is a very compact meter for single phase and three phase applications. The meters have an LCD with large digits showing energy register and instrumentation values. The meters have a wide temperature range which makes it possible to install the meters in many locations. Navigating the meters are easily done via the pushbutton below the display. Instrumentation The C series meters support reading of instrument values. A number of electrical properties can be read: • • • • Outputs The C series meters have an output that can be used as pulse output or alarm output. The alarm quantity and levels is easily configured on the meter with the push button. The output can be used for controlling external apparatus like a contactor or an alarm indicator (connected via an external relay). Approvals The C series meters are type approved according to IEC and MID. MID is the Measuring Instruments Directive 2004/22/EC from the European Commission. The type approval is according to standards that covers all relevant technical aspects of the meter. These include climate conditions, electromagnetic compatibility (EMC), electrical requirements, mechanical requirements and accuracy. MID versions have initial verification according to annex F of the Measuring Instruments Directive. Power factor Active power Current Voltage ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 133 Electricity Meters C11 and C13 – Single and three phase meter 40A A 13 2CMC486001F0001 Description C11 Direct connected electricity meter. IEC approval. Instrument values. Alarm function. Optional - Verified and approved according to MID, 1 DIN. Ordering details C11 Voltage V Accuracy Class I/O Communi- Type cation Pulse output – Order Code Pkg Weight qty 1 pc Steel Active energy 1 x 230 V AC Class B (Cl. 1) Class 1 C11 110 - 100*) 2CMA100014R1000 1 0.07 C11 110 - 300 1 0.07 2CMA170550R1000 *) MID approval 2CMC486004F0001 Description C13 Direct connected electricity meter. IEC approval. 3 element metering. Instrument values. Alarm function. Optional - Verified and approved according to MID, 3DIN. Ordering details Voltage V C13 Accuracy Class I/O Communication Type Order Code Pkg Weight qty 1 pc Class B (Cl. 1) Pulse output – C13 110 - 100*) 2CMA100191R1000 1 0.17 – C13 110 - 300 1 0.17 Steel Active energy 3 x 230/400 V AC Class 1 2CMA100192R1000 *) MID approval 134 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Electricity Meters C series – Technical data C11 C13 Nominal voltage Voltage range Power dissipation voltage circuits Power dissipation current circuits Base current Ib Rated current In Reference current Iref Transitional current Itr Maximum current Imax Minimum current Imin 230 V AC 230 V AC (-20% - +15%) < 0.8 VA (0.2 W) total 0.02 W at 230 V AC and Ib 5A 3x230/400 3x220-240 V AC (-20% - +15%) 1.5 VA (0.6 W) total Starting current Ist Terminal wire area Recommended tightening torque < 20 mA 1 - 10 mm2 0,8 Nm Voltage/current inputs 0.04 VA (0.04 W) per phase at 230 V AC and Ib – 5A 0.5 A 40 A 0.25 A 0.5 - 10 mm2 General data Frequency Accuracy Class Active energy Display of energy 50 or 60 Hz ± 5% B (Cl.1) 1% 6 digits LCD Communication Terminal wire area Recommended tightening torque – – Pulse indicator (LED) Pulse frequency Pulse length 1000 imp/kWh 40 ms Environmental Operating temperature Storage temperature Humidity Resistance to fire and heat Resistance to water and dust Mechanical environment Electromagnetic environment – 25 °C - + 70 °C – 25 °C - + 85 °C 75% yearly average, 95% on 30 days/year Terminal 960 °C, cover 650 °C (IEC 60695-2-1) IP20 on terminal block without protective enclosure and IP51 in protective enclosure, according to IEC 60529. Class M1 in accordance with the Measuring Instrument Directive (MID). (2004/22/EC). Class E2 in accordance with the Measuring Instrument Directive (MID), (2004/22/EC). Outputs Current Voltage Pulse output frequency Pulse length Terminal wire area Recommended tightening torque 2 - 100 mA 5 - 40 V DC 100 (imp/kWh) 200 ms 0.5 - 6 mm2 0.8 Nm EMC compatibility Impulse voltage test Surge voltage test Fast transient burst test Immunity to electromagneti HF-fields Immunity to conducted disturbance Immunity to disturbance with harmonics Radio frequency emission Electrostatic discharge Standards Mechanical Material 6 kV 1.2/50 µs (IEC 60060-1) 4 kV 1.2/50 µs (IEC 61000-4-5) 4 kV (IEC 61000-4-4) 80 MHz - 2 GHz at 10 V/m (IEC 61000-4-3) 150 kHz - 80 MHz, (IEC 61000-4-6) 2kHz - 150kHz EN 55022, class B (CISPR22) 15 kV (IEC 61000-4-2) IEC 62052-11, IEC 62053-21 class 1, GB/T 17215.211-2006, GBT 17215.321-2008 class 1, GB 4208-2008, EN 50470-1, EN 50470-3 category B Glass reinforced polycarbonate Dimensions Width Height Depth DIN modules 17,5 mm 111 mm 65 mm 1 54 mm 122 mm 65 mm 3 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 135 A 13 A 13 136 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Security and Surveillance – Fault Monitoring and Data Logging Fault Monitoring Unit, MDRC It is used to detect and manage up to 100 fault messages which are processed within the unit and can be forwarded to a display unit. Furthermore, an optical and an acoustic collective status signal is provided. Messages can be acknowledged and data losses can be reported. The devices support message formats to DIN 19 235: messages with continuous lighting, new value messages with simple flashing light, initial value messages with simple acknowledgem ent, motor messages. Current values can be centrally scanned. SMB/S 1.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 2 SMB/S 1.1 GHQ6310085R0111 1 kg 0.12 Monitoring Unit, MDRC Monitors up to 100 bus devices in KNX systems, which can be divided into 5 groups. The devices are monitored to ensure their presence and minimum functionality (send and receive). Monitoring can be undertaken based on the physical address or the group address. A total of four different monitoring modes are available. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. EUB/S 1.1 2 EUB/S 1.1 2CDG110066R0011 1 kg 0.12 Data Logging Unit, MDRC It detects local operation cycles and operating hours to plan the maintenance or durability evaluation of the devices. For each of the 35 channels to be monitored, limit values can be set and a message sent if this limit is exceeded. The logging of operating hours can be predetermined for the total or remaining time. These values can be modified via communication objects. Description MW Type Order code BDB/S 1.1 Price Pack Weight 1 pc. unit 1 pc. E pc. 2 BDB/S 1.1 2CDG110067R0011 1 kg 0.12 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 137 A 14 ABB i-bus® KNX Security and Surveillance – Approved Security with KNX A 14 The compact solution for security applications – the Security Terminals The Security Terminal provides a compact security solution for KNX applications for detection and signalling of intrusion, personal attack and technical hazards. They are used as the interface between the security technology sensors and KNX. Depending on the configuration, the devices feature 2, 4 or 8 inputs – so-called detector circuits or zones. They are used for monitoring connected passive detectors (e.g. magnetic contacts, glass break sensors, etc.) to the ABB i-bus® KNX as well as for connection of floating contacts in applications with enhanced security requirements. The application program offers several functions for security applications, such as –– Direct and delayed setting –– Internal setting with occupancy and external setting when absent –– Setting of the connected detector types –– Reset input and setting input –– Detector monitoring –– Zones (detector circuits) can be switched off –– Different types of alarms –– Setting for freely programmable relay outputs, e.g. for direct control of signalling devices. Through the connection of security technology and KNX, the detectors employed can, in addition to the security functions, also be used for heating control (e.g. window contact signal for control of the heating valve) or lighting control (e.g. central switch off of the lighting when the alarm logic is set). The Security Terminals can be used as autonomous systems with the integrated alarm logic, in conjunction with the Security Module SCM/S or with an Intrusion Alarm Panel GM/A 8.1 or L240. 138 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Security and Surveillance – Approved Security with KNX Security Module, MDRC The module provides the necessary logic functions to link the various KNX devices (e.g. zone terminals) to a security system. Up to 64 different zones can be evaluated via communication objects. Arming, operation and display are also implemented using communication objects. The device has a freely programmable relay output for connection of a signal encoder. An uninterruptable KNX power supply with battery back-up is recommended for security function buffering on mains failure. SCM/S 1.1 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 2 MT/S 8.12.2M SCM/S 1.1 2CDG110024R0011 1 kg 0.13 Security Terminal They are used as the interface between the security technology sensors and the KNX. The device features inputs, so-called zones. They are used for monitoring connected passive detectors, e.g. magnetic contacts and/or glass break sensors on the ABB i-bus® KNX and/or for connection of floating contacts in applications with enhanced security requirements. The device can be used as a system with autonomous alarm logic or in combination with the Security Module SCM/S or an Intrusion Alarm Panel. The device requires an external 12 V DC SELV auxiliary power supply, (e.g. NTU/S 12.2000.1). Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg 8-fold, MDRC 4 MT/S 8.12.2M 2CDG110110R0011 1 0.19 4-fold, MDRC 4 MT/S 4.12.2M 2CDG110109R0011 1 0.19 2-fold, FM – MT/U 2.12.2 2CDG110111R0011 1 0.08 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 139 A 14 ABB i-bus® KNX Security and Surveillance – The new KNX Security Panel A 14 Professional alarm system for KNX experts With the new KNX Security Panel GM/A 8.1 ABB presents the first security system that is compatible with both, the international KNX standard (14543-3-x ISO / IEC) and the international standard for alarm systems (ISO / IEC 62642). Therefore the KNX Security Panel GM/A 8.1 is ready for a worldwide usage and expands business opportunities of nearly 40,000 KNX partners in 124 countries. The new system is the perfect solution for projects ranging from simple to high security requirements. This innovation is the result of more than 30 years of system and application knowledge in alarm technology and building automation at ABB. 140 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Security and Surveillance – The new KNX Security Panel A 14 Magnet reed contacts SafeKey setting device Glass break sensors Water detector Gas detector Smoke detector Alarming Zone modules for security bus Motion detectors for security bus and SafeKey Evaluation Module Security bus KNX Bus for keypads Ethernet A complete product product portfolio: One system – all interfaces To fulfill the project requirements ABB provides the user besides the new panel and keypad a complete product portfolio for professional alarm technology as well as known solutions for all trades of KNX building automation. The KNX Security Panel is for universal usage for all kinds of hazardous situations in buildings like intrusion, personal attack, smoke, gas- and water leakage. ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 141 ABB i-bus® KNX Security and Surveillance – The new KNX Security Panel A 14 Ethernet connection for programming, diagnostics and operation via a standard webbrowser Direct inputs for security sensors Keypads Internal, external or remote alarming Security bus for security sensors, zone modules and setting devices KNX interface to display alarm states via displays of building automation and to control automatic building functions with support of security sensors. KNX Security Panel without cover, integrated zone modules and batteries The KNX Security Panel provides all needed system interfaces: An ethernet connection is used for programming, diagnostics and operation via a standard webbrowser as well as integration into the building network. The security sensors will be connected directly to the panel inputs or via the security bus, where the setting device for the system is also connected. Furthermore the panel provides interfaces for the also newly developed keypads and for internal, external or remote alarming. Finally the integrated KNX interface allows on the one hand to display alarm states via displays of building automation and on the other to control automatic building functions with support of security sensors. 142 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 ABB i-bus® KNX Security and Surveillance – The new KNX Security Panel KNX Security Panel, SM GM/A 8.1 NEW for the protection of small to medium residential or commercial properties against intrusion and technical faults. The Security Panel is suitable for up to five logical setting zones. It has 8 integrated zones for detectors, a Security Bus for Bus-detectors, Bus-Zone Modules or Setting devices, Ethernet connection (RJ45) for programming, operating and displaying system status via Web-Browser and an integrated KNX interface. The Security Panel GM/A 8.1 complies with the requirements to VdS classes A, B and C, to the European Standard EN 50131, Grade 1 to 3 and to ISO/IEC 62642 Grade 1 to 3. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. Off the wall tamper contact – – GM/A 8.1 WA/Z 1.1 2CDG110150R0011 2CDG110174R0011 1 1 kg 10.5 0.1 for GM/A 8.1 Keypad for GM/A 8.1 NEW to connect to Security Panel GM/A 8.1 via the Keypad-Bus. The Keypad allows easy operation of the Security Panel. System messages are displayed on a four-line LCD display. Fife Keypads can be connected to each Security Panel. There is no need for an external voltage supply, the keypads are supplied via the Keypad-Bus. Description MW Type Order code BT/A 1.1 – MG/E 4.4.1 BT/A 1.1 2CDG280001R0011 Price Pack Weight 1 pc. unit 1 pc. E pc. kg 1 0.5 Zone Module, 4fold NEW to connect to Security Panel GM/A 8.1 via the Security-Bus. For expansion of the Security-Panel by 4 detector zones. Used for connection to the exterior perimeter detectors such as magnetic reed contacts and passive glass break sensors. The module has 4 zones to which several detectors can be connected. The status of each zone is displayed with a status LED. The Zone Module delivers the control signals and the supply voltage for the external detectors. There is no need for an external voltage supply, the Zone Modules are supplied via the Security-Bus. Description to mount in the MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg – MG/E 4.4.1 2CDG110178R0011 1 0.1 – MG/A 4.4.1 2CDG110186R0011 1 0.1 Security Panel housing in a surface mounting housing for installation in the building ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 143 A 14 ABB i-bus® KNX Security and Surveillance – Intrusion Alarm Panel L240 A 14 Intrusion Alarm Panel L240 For the protection of small to medium residential and commercial properties against intrusion and technical faults. VdS approved as an Intrusion Alarm Panel for VdS classes A, B, C. Corresponds to DIN VDE 0833 parts 1 & 3, Stage 3 according to European standard EN 50131-1 “medium to high risk”. Description MW Type Order code L240 Price Pack Weight 1 pc. unit 1 pc. E pc. – L240/ENG 2CDG230017R0011 kg 1 LCD Keypad for L240 For operation and programming of the panel. The messages are displayed on a two-line LCD display. Menu driven operation and programming of the panel. Internal and external setting on the keypad is possible. VdS class C. Description MW Type Order code Weight 1 pc. unit 1 pc. E pc. L240/PT – XS/S 1.1 Price Pack L240/PT 2CDG230014R0011 kg 1 KNX-Interface for Intrusion Alarm Panel, MDRC The Intrusion Alarm Panel L240 with a comprehensive range of sensors for all surveillance tasks, and the comfortable arming mechanism SafeKey, provide a universal solution for professional applications. Integration into KNX systems is possible using the Interface XS/S1.1. Accordingly there are numerous benefits: For example, a door/window opening detector can be used to switch off the heating and save energy in the unset state. When an alarm is triggered, the KNX devices can carry out actions such as switching on the light or operating the blinds. The interaction offers further benefits in terms of system integration, which comply to the demands of the VdS up to Class C. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 2 XS/S 1.1 2CDG110075R0011 1 kg 0.11 Serial Interface Module for L240 For programming of the L240 via PC with serial interface V24, incl. Software WinPC. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – L208/V.24 L208/V.24 GHQ3280220R0001 kg 1 IP Interface Module for L240 For programming of the L240 via PC with Ethernet interface, incl. Software WinPC. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. L240/IP – L240/IP 2CDG230013R0011 144 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg ABB i-bus® KNX Security and Surveillance – System Components A 14 Sealed Lead Acid Battery, 12 V DC For Intrusion Alarm Panel emergency power. 2 units can be installed. VdS class C. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. SAK7 – SAK7 GHV9240001V0011 1 – SAK17 GHV9240001V0013 1 kg Infra-Red Motion Detector for security-bus For direct connection to the security-bus of the Intrusion Alarm Panel GM/A 8.1 or L240. The motion detectors with passive infra-red technology are registered for VdS classes B and C (anti-masking monitored). They facilitate monitoring of an area with an IR range of up to 15 m. Description IR/XB IR/XC EIM/XB EIM/XC MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. VdS-No. G 110 506 – IR/XB 2CDG230023R0011 1 VdS-No. G 110 062 – IR/XC 2CDG230024R0011 1 kg Dual Motion Detector for security-bus For direct connection to the security-bus of the Intrusion Alarm Panel GM/A 8.1 or L240. The Dual-Motion Detector combines proven passive infra-red technology with temperature-independent microwave technology. The combination of both functional principles results in a detector featuring high immunity to false alarms, even with unfavourable ambient conditions, and which still has high detection security. The detectors are registered for VdS classes B and C (anti-masking monitored). They facilitate monitoring of an area with an IR range of up to 15 m. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. VdS-No. G 110 513 – EIM/XB 2CDG230025R0011 1 VdS-No. G 110 061 – EIM/XC 2CDG230026R0011 1 MW Type Order code kg Mounting Bracket For motion detectors. Description MW Price Pack Weight 1 pc. unit 1 pc. E pc. – MW GHV9230039V0020 kg 1 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 145 ABB i-bus® KNX Security and Surveillance – System Components A 14 Zone Bus-Module, 2-fold, FM For expansion of the panel by 2 detector circuits. Used for connection to the exterior perimeter detectors such as magnetic reed contacts and passive glass break sensors. The module has 2 zones to which 2 detectors can be connected via LSA terminals. The module is an intelligent distributor by simple installation in a 60 mm installation box in the vicinity of the window. L240/MG2 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – L240/MG2 2CDG220003R0011 kg 1 Zone Bus-Module, 4-fold For expansion of the panel by 4 detector circuits. An SAD enclosure is required for installation. Description MW Type Order code L840/MG4 Price Pack Weight 1 pc. unit 1 pc. E pc. – L840/MG4 GHQ3280011R0001 kg 1 SafeKey Wall Reader, SM For setting/unsetting with the Evaluation Module L240/BS. The unit is actuated by inserting the electronic SafeKey chipkey. The SafeKey Wall Reader WEL is equipped with the key reader and an acknowledgement buzzer. VdS class C. Description MW Type Order code WEL/A, ES Price Pack Weight 1 pc. unit 1 pc. E pc. – WEL/A, ES GHQ3050023R0001 kg 1 SafeKey Wall Reader, SM For setting/unsetting with the Evaluation Module L240/BS. The unit is actuated by inserting the electronic SafeKey chipkey. The SafeKey Wall Reader WEL is equipped with the key reader and an acknowledgement buzzer. VdS class C. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – WELT/A, ES GHQ3050024R0001 kg 1 WELT/A, ES SafeKey Chipkey It is an electronic carrier medium for lock actuation and for setting/unsetting on a strike plate, door cylinder or wall reader. A SafeKey Chipkey can be authorized for any number of different SafeKey systems with different levels of authorization. Description MW Type Order code SCS Price Pack Weight 1 pc. unit 1 pc. E pc. – SCS GHQ3050027R0001 146 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg ABB i-bus® KNX Security and Surveillance – System Components SafeKey Evaluation Module For connection of the SafeKey components as well as all components required for a setting door (magnetic contacts, lock bolt switching contact, bolt lock, internal siren). For direct connection to the security-bus of the Intrusion Alarm Panel GM/A 8.1 or L240. The management of the electronic keys from the SafeKey range is undertaken completely on the LCD keypad of the panel. L240/BS Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – SSM/A L240/BS GHQ3050031R0001 kg 1 SafeKey Switching Module is used for an easy connection and evaluation of the SafeKey Wall Reader with or without keypad (WEL or WELT). Applicable for potential-free switching of electrical components up to 5 A at a max. voltage of 12...24 V DC/AC, i.e. electrical door opener or garage doors, or to set/ unset a KNX security system via the connection to a Security Terminal MT/x. In subject to the housing type the module can be used for surface or flush mount. A 12 V power supply is required. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. Surface mounting – SSM/A 2CDG240019R0011 1 Flush mounting – SSM/U 2CDG240020R0011 1 kg Electromechanical Bolt Lock Prevents access to the set zone of an Intrusion Alarm Panel. The unit is mounted in the door frame. Only a single bore or the counterpart for the locking bolt in the door panel is required. Suitable for use with WEL and WELT. VdS class C. Description MW Type Order code ESPE Price Pack Weight 1 pc. unit 1 pc. E pc. – ESPE GHV9250010V0001 1 Replacement Locking Bolt – Mounting kit, flat door panel – EVSB AMSP GHV9250010V0002 GHV9250010V0004 1 1 AMSE GHV9250010V0003 1 kg and frame Mounting kit, raised door – panel Distribution Enclosures For installation of the Bus Modules L840/MG4 and L240/BS. Description MW Type Order code SAD/GAP Price Pack Weight 1 pc. unit 1 pc. E pc. Surface mounting – SAD/GAP GHQ3280015R0001 1 Flush mounting – SAD/GUP GHQ3280013R0001 1 Wall box for SAD/GUP – SAD/ED GHQ3280014R0001 1 kg ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 147 A 14 ABB i-bus® KNX Security and Surveillance – System Components A 14 Magnet Reed Contact Set For opening surveillance of windows and doors, complete for bolting or drilling Contents: 1 magnet, 1 reed contact with 4.0 m connection cable LIYY 4 x 0.14 mm2, 2 housings, 2 spacer plates, 2 flanges and 4 anti-magnetic fixing screws. VdS No. G 191549. VdS class B. Description MW Type Order code MRS/W Price Pack Weight 1 pc. unit 1 pc. E pc. RTK white – MRS/W GHQ3201972R0001 1 brown – MRS/B GHQ3201972R0002 1 Saver Set (20 pcs.), white – VMRS/W GHQ3201972R0011 1 Saver Set (20 pcs.), brown – VMRS/B GHQ3201972R0012 1 Rolling Door Magnet Reed Contact Set For monitoring opening or rolling doors or other large doors in the industrial field. Contents: 1 magnet, 1 reed contact with 2 m connection cable 4 x 0.14 mm2, 1 m protective tubing and 1 set of mounting accessories. Degree of protection: IP 68; Environmental class to VdS 4; VdS class B. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – SPGS/W kg RTK GHQ3201973R0021 kg 1 Glass Break Sensor For surveillance of glass surfaces of windows, display windows and doors with high interference immunity and integrated memory display. For operation directly on detector circuits of intrusion alarm panels or security terminals. Extremely compact dimensions. Dimensions: H x W x D = 18 x 18 x 9 mm. Mounted onto glass using Loctite adhesive (LKS). With 5 m connection cable. VdS No. G 194524. VdS class B. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. white – SPGS/W GHV9220004V0009 1 brown Mechanical Glass – – SPGS/B GP2 GHV9220004V0010 GHV9220004V0004 1 1 – LKS GHQ4001906R0001 1 kg Break Test Device Loctite adhesive Lock Bolt Switching Contact For installation in the strike plate, for lock monitoring on doors. Water-tight IP 67, with 2.5 m connection cable LIYY 3 x 0.14 mm2. VdS No. G 190008. VdS class C. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. WRK/W – WRK/W 2CDG250003R0011 148 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg ABB i-bus® KNX Security and Surveillance – System Components Window Lock Monitoring Contact Lock monitoring is carried out with a special magnet and a reed contact. The magnet is mounted on the push rod of the window sash while the reed contact is mounted on the frame. The connection cable LIYY 4 x 0.14 mm2 is 4 m in length. VdS No. G 190074. VdS class C. Description MW Type Order code VSUE Price Pack Weight 1 pc. unit 1 pc. E pc. – VSUE GHV9210018V0022 kg 1 Window opening Plungers Indirect lock monitoring by mechanical push opening of the window in conjunction with magnetic contacts that monitor opening. Available in 2 spring strengths. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. ADB 150 N – ADB GHV9210018V0020 1 35 N – ADB1 GHV9210018V0021 1 kg Emergency Call Button For manual alarm tripping. Complies with the police regulations since it features permanent trip recognition, momentary-contact function, with cover contact. Surface mount version. Colour: white. VdS class C. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. ND/W Surface mounting – ND/W GHQ7132443R0011 1 Flush mounting – NDU/W GHQ7132443R0021 1 Spare Papers (10 pcs.) – EP GHQ7132443R0003 1 kg Cover plate Used primarily in the banking sector or other institutions, where unintentional alarm triggering is possible due to public access. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – NDA/W NDA/W GHQ7132443R0004 kg 1 Passive Infra-Red Detector For conventional wiring to zone inputs of an Intrusion Alarm Panel or a KNX Sercurity Terminal. With a volumetric lens for interior monitoring. Can be optionally set for hall monitoring function up to 15 m. Color: RAL 9010 pure white; for use up to VdS class B. Description MW Type Order code IR/KB Price Pack Weight 1 pc. unit 1 pc. E pc. VdS-No. G 110 502 – IR/KB 2CDG230027R0011 kg 1 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 149 A 14 ABB i-bus® KNX Security and Surveillance – System Components A 14 EIM/KB Dual Motion Detector This new dual detector is based on proven detection principles of the EIM detector AND incorporation of infrared technology and electromagnetic field detection. The detector enables a detection range of 15 m with 17 zones on 6 levels. The range of the infra-red component the electromagnetic field can be adjusted separately using a jumper. Up to VdS class C; Color RAL 9010 pure white. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. VdS-No. G 110 503 – EIM/KB 2CDG230028R0011 1 VdS-No. G 110 060 – EIM/KC 2CDG230029R0011 1 MW Type Order code kg Mounting Bracket For motion detectors. Description MW Price Pack Weight 1 pc. unit 1 pc. E pc. – MW GHV9230039V0020 kg 1 Dual Ceiling Detector Operates according to the proven detection principle of the EIM detector (infra-red technology and electromagnetic field) over 360°. The range of the infrared component can be adapted via the mounting height while the range of the electromagnetic field can be adjusted separately using a jumper. The detector is fitted with a walk test LED. Colour: RAL 9010 pure white. Description MW Type Order code EIM/D Price Pack Weight 1 pc. unit 1 pc. E pc. – SGL EIM/D 2CDG230039R0011 1 Gas Detector For measurement and evaluation of the concentration of natural gas or liquefied gas in the air. The detector requires a 10 – 30 V DC voltage supply and has a normally open relay output contact for connection to the intrusion alarm panels and fire alarm panels, features an LED display and a Piezo buzzer. For ceiling and wall mounting. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – SWM 4 kg SGL GHQ3050008R0001 kg 1 Water Detector A resin-encapsulated water detector with gold-plated Termipoint pins, detects water ingress, e.g., pipe fractures, ingress of groundwater and sewage, water damage caused by washing machines and dishwashers etc. before the damage becomes too expensive. For operation directly on detector circuits of intrusion alarm panels or security terminals. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – SWM 4 GHQ4030001R0004 150 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg ABB i-bus® KNX Security and Surveillance – System Components Water Detector with Relay Output Features a potential free changeover contact output, an LED parallel output and a LED display. The detector resets itself automatically when the affected area dries out. The device draws its power from an external 10 ... 23 V DC voltage source. Description MW Type Order code SWM 4/RN Weight 1 pc. unit 1 pc. E pc. – FC650/O Price Pack SWM4/RN GHQ4030001R0012 Optical Smoke Detector Optical smoke detector in threshold alarm technology that detects smoke according to the scattered-light principle The detectors feature an alarm indicator on the detector head that is visible from all angles, and which can be be triggered with a permanent magnet for test purposes. A detector base is provided for mounting and cable connection purposes into which the detector is simply screwed in via the bayonet connection. Each detector is equipped with an alarm LED, which displays the stored alarm in the event of an a alarm Detector/base diameter: 110 mm. VdS approved. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – FC650/TMAX FC650/O 2CDG430073R0011 kg 1 Heat Detector Static Heat Detector in threshold alarm technology, – trigger temperature 78 °C. The detectors feature an alarm indicator on the detector head that is visible from all angles, and which can be be triggered with a permanent magnet for test purposes. A detector base is provided for mounting and cable connection purposes into which the detector is simply screwed-in via the bayonet connection. Each detector is equipped with an alarm LED, which displays the stored alarm in the event of an a alarm. Detector/base diameter: 110 mm. VdS approved. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – FC600/BREL kg 1 FC650/TMAX 2CDG430081R0011 kg 1 Detector Base, 12 V Enables system-independent connection of the FC650 series fire detector to systems or devices that are not specifically designed for this detector technology. Examples include Intrusion Alarm Panels, KNX Security Terminals, elevator controls or other signal processing equipment. The detector base must be supplied by either a 12 V or a 24 V DV voltage supply. A floating 30 V DC/1 A changeover contacting is provided for transferring an alarm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – FC600/BREL 2CDG430051R0011 kg 1 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 151 A 14 ABB i-bus® KNX Security and Surveillance – System Components A 14 Testing Aerosol For optical smoke detector testing, 250 ml. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – FPA03 FPA03 GHV9020012V0021 kg 1 Reed Relay, 12 V For connection, e.g. to transistor outputs of Intrusion Alarm Panels. Coil voltage 8.5...14 V DC. Current consumption 5 mA at 12 V DC. Contact loading 24 V/100 mA. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – RL GHV9270013V0100 kg 1 Electronic Solid-State Siren Electronic solid-state siren with intermittent tone for alarm purposes in indoor installations. External dimensions: ø x H = 90 x 37 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. SSS – SSS GHV9270001V0001 kg 1 Siren in Enclosure An aluminium protective housing with additional protective enamel coating. Protected against sabotage by a case tamper contact. The alarm inputs are wired onto a terminal strip. With fixing screw (M4) for potential equalization on the base. Dimensions: H x W x D = 200 x 205 x 88 mm; Color: RAL 9002 Environmental class III to VdS. SSF/G Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – SSF/G GHQ3050017R0001 kg 1 Combination Signalling Device Siren in an aluminium protective housing with additional protective enamel coating and strobe light mounted on top. Protected against sabotage by a case tamper contact. The alarm inputs are wired onto a terminal strip. Dimensions: H x W x D = 258 x 205 x 88 mm; Color RAL 9002. VdS No. G 101147. VdS class C. Description MW Type Order code SSF/GB Price Pack Weight 1 pc. unit 1 pc. E pc. – SSF/GB GHQ3050018R0001 152 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg ABB i-bus® KNX Security and Surveillance – Busch Smoke and Heat Alarm 6833/01-84-500 Busch Smoke Alarm® ProfessionalLine NEW For early detection of smouldering fires and open fires with smoke development indoors according to the photooptical measurement principle (Tyndall). With installed Lithium battery. Battery life min. 10 years. With test button and muting. Can be networked with up to 12 detectors using the radio module. Can be networked via 2-wire twisted pair cable with up to 12 detectors. Acoustic alarm: installed horn (85 dBA). Cyclic functional test. Including attachment material – VdS certified. Conform to EN 14604 studio white. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. 6835/01-84-500 not networkable – 6833-84-500 6800-0-2720 1 networkable – 6833/01-84-500 6800-0-2721 1 kg Busch Heat Alarm ProfessionalLine NEW Signal triggered at over 57 °C. With installed Lithium battery. Battery life min. 10 years. With test button and muting. Can be networked via 2-wire twisted pair cable with up to 12 detectors. Can be networked with up to 12 detectors using the radio module. Acoustic alarm: installed horn (85 dBA). Cyclic functional test. Including attachment material – VdS certified. Conform to EN 14604. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. studio white – 6835/01-84-500 6800-0-2723 kg 1 Busch Smoke Alarm® Radio Module For wireless networking of multiple Busch smoke alarms® / heat alarms. With installed Lithium battery. Battery life min. 10 years. Radio frequency: 868 MHz. Range: max. 100 m outdoors, max. 30 m indoors. 6827-84 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6828 6800-0-2514 kg 1 Busch Smoke Alarm® Relay For connecting external systems, e.g. KNX. Relay contact, floating changeover contact 230 V~ max. 5 A. Cable connection: up to 2 x 2 x 1.5 mm². With installed radio module. Rated voltage: 230 V~. Description MW Type Order code 6829-84 Price Pack Weight 1 pc. unit 1 pc. E pc. studio white – 6829-84 6800-0-2515 kg 1 Busch Smoke Alarm® Remote Control For service purposes. With muting, test and search function. 6824-84 Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. studio white – 6824-84 6800-0-2516 kg 1 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 153 A 14 WaveLINE Wireless Control RF Sensors A 15 01 02 03 04 01 SM WaveLINE movement detector, 05 02 WaveLINE media converter TP-RF, Article-No. 6747 AGM-204-500 Article-No. 6770-500 The WaveLINE Busch-Watchdog 220 is a batteryoperated movement detector. Since it is installed without cables it can be mounted in the most ideal position. The battery has a service life of 5 years. 03 Window sensor, The KNX and Busch radio control are coupled via the WaveLINE media converter TP-RF. Telegrams can be exchanged in both directions. One application serves to transmit the window sensor to the KNX system. 04 Universal detector, Article-No. 6720-64 05 Remote control RF, Article-No. 6721-64 The WaveLINE window sensor is retrofitted between the window and window handle, which means the original window handle is retained. The window handle is used for the following window positions: opened, tilted and closed. Article-No. 6780-500 The WaveLINE universal detector is suited for skylights or sliding doors and is activated via a reed contact. The universal detector has a second channel which can be permanently wired to a floating contact (NO or NC contacts). The remote control is used as mobile control for the WaveLINE. Loads can be controlled individually and scenes can be started. Control elements Switch ranges pure stainless steel 1gang 2gang 4gang 1gang 2gang 6731-866-500 6732-866-5006733-866-500 solo® 6731-xx-500 6732-xx-5006733-xx-500 Busch-axcent® 6731-xx-500 6732-xx-5006733-xx-500 future® linear 6731-xx-500 6732-xx-5006733-xx-500 Reflex SI 6731-214-5006732-214-500 Busch-Duro 2000® SI6731-212-500 6732-212-500 154 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 WaveLINE Wireless Control RF Actuators / Displays 01 02 03 05 | NEW 06 | NEW 07 04 | NEW 01 1gang WaveLINE actuator, Article-No. 6702-500 02 2gang WaveLINE actuator, Article-No. 6703-500 03 WaveLINE dimming actuator, Article-No. 6704-500 04 WaveLINE blind actuator, Article-No. 6705-101-500 Before 05 1gang WaveLINE actuator, Article-No. 6701-101-500 06 WaveLINE binary input, 2gang Article-No. 6725-500 07 WaveLINE LED display, 4gang with switching function, Article-No. 6730-84 After Usage of frequency might be restricted in certain countries. ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 155 A 15 WaveLINE Wireless Control Transmitter A 15 6731-214-500 Wall-mounted transmitter WaveLINE 1-channel 1gang wall-mounted transmitter independent of mains power supply. For switching and dimming. For controlling blinds and light scenes. 1 radio channel can be operated or up to 2 light scenes can be called up. For flush-mounted WaveLINE actuators 6701-101, 6702, 6703, 6704 and 6705-101. For LED display WaveLINE 6730-xxx. Compatible with WaveLINE KNX gateway TP-RF 6770. Send frequency: 868 MHz. Free-field range: approx. 100 m. Power supply: lithium button cell battery Type CR2032. Battery included in delivery; service life: typically 5 years. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg Busch-Duro 2000 SI ® white – 6731-212-500 6730-0-0028 1/10 – 6731-214-500 6730-0-0030 1/10 Reflex SI alpine white 6732-214-500 Wall-mounted transmitter WaveLINE 2-channel 2gang wall-mounted transmitter independent of mains power supply. For switching and dimming. For controlling blinds and light scenes. 2 radio channels can be operated or up to 4 light scenes can be called up. For flush-mounted WaveLINE actuators 6701-101, 6702, 6703, 6704 and 6705-101. For LED display WaveLINE 6730-xxx. Compatible with WaveLINE KNX gateway TP-RF 6770. Send frequency: 868 MHz. Free-field range: approx. 100 m. Power supply: lithium button cell battery Type CR2032. Battery included in delivery; service life: typically 5 years. Description MW Type Order code 6731-84-500 Price Pack Weight 1 pc. unit 1 pc. E pc. Busch-Duro 2000 SI ® white – 6732-212-500 6730-0-0029 1/10 – 6732-214-500 6730-0-0031 1/10 – – 6731-82-500 6731-83-500 6730-0-0032 6730-0-0035 1/10 1/10 – 6731-84-500 6730-0-0038 1/10 – 6731-866-500 6730-0-0041 1/10 Reflex SI alpine white future® linear ivory white aluminium silver 2) studio white pure stainless steel stainless steel 2) 156 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 kg WaveLINE Wireless Control Transmitter 6732-84-500 Wall-mounted transmitter WaveLINE 2-channel 2gang wall-mounted transmitter independent of mains power supply. With labelling field and labelling strip. For switching and dimming. For controlling blinds and light scenes. 2 radio channels can be operated or up to 4 light scenes can be called up. For flush-mounted WaveLINE actuators 6701-101, 6702, 6703, 6704 and 6705-101. For LED display WaveLINE 6730-xxx. Compatible with WaveLINE KNX gateway TP-RF 6770. Send frequency: 868 MHz. Free-field range: approx. 100 m. Power supply: lithium button cell battery Type CR2032. Battery included in delivery; service life: typically 5 years. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg future linear ® ivory white aluminium silver 2) studio white pure stainless steel 6732-82-500 6732-83-500 6730-0-0033 6730-0-0036 1/10 1/10 – 6732-84-500 6730-0-0039 1/10 – 6732-866-500 6730-0-0042 1/10 2) stainless steel 6733-84-500 – – Wall-mounted transmitter WaveLINE 4-channel 4gang wall-mounted transmitter independent of mains power supply. With labelling field and labelling strip. For switching and dimming. For controlling blinds and light scenes. 4 radio channels can be operated or up to 8 light scenes can be called up. For flush-mounted WaveLINE actuators 6701-101, 6702, 6703, 6704 and 6705-101. For LED display WaveLINE 6730-xxx. Compatible with WaveLINE KNX gateway TP-RF 6770. Send frequency: 868 MHz. Free-field range: approx. 100 m. Power supply: lithium button cell battery Type CR2032. Battery included in delivery; service life: typically 5 years. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg future® linear ivory white aluminium silver 2) studio white pure stainless steel stainless steel – – 6733-82-500 6733-83-500 6730-0-0034 6730-0-0037 1/10 1/10 – 6733-84-500 6730-0-0040 1/10 – 6733-866-500 6730-0-0043 1/10 2) ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 157 A 15 WaveLINE Wireless Control Transmitter A 15 6780-500 Remote control WaveLINE 1) Network-independent radio control. For switching and dimming. For controlling blinds and light scenes. With 3 groups (A, B or C) with 5 pairs of channels. There are 15 radio channels operated singly or up to 30 light scenes can be called. With “ALL OFF” function for associated actuators. For flush-mounted WaveLINE actuators 6701-101, 6702, 6703, 6704 and 6705-101. For LED display WaveLINE 6730-xxx. Compatible with WaveLINE KNX gateway TP-RF 6770. Send frequency: 868 MHz. Free-field range: approx. 100 m. Power supply: lithium button cell battery Type CR2032. Battery included in delivery; service life: typically 5 years. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. black 6725-500 – 6780-500 6780-0-0001 kg 1/10 WaveLINE binary input, 2gang, 230 V~ NEW Radio control telegrams are sent when the two extension units are activated with mains voltage (AC 230 V~). Operation also possible via conventional push-buttons (2020 US, 2012/6 UK). The 2gang binary input has 5 function modes 2-channel switching; 2-channel dimming; 1-channel blind; Two-channel light scene control; Channel 1: Switching ON. Channel 2: Continuous switching ON/OFF. In dependence of the selected function, it can be combined with WaveLINE actuators 6701-101, 6702, 6703, 6704, 6705-101. Compatible with WaveLINE KNX gateway TP-RF 6770. Repeater function can be activated for extended range. For universal attachment or installation. Phase and neutral conductor required. For installation in (deep) flush-mounted boxes to German Standard DIN 49073, Part 1. Send/receive frequency: 868 MHz. Free-field range: approx. 100 m. Control element: Adjustable potentiometer. Display elements: LED for status display. Rated voltage: 230 V~, +10 % / –10 %. Rated frequency: 50 Hz. Inputs: 2. Polling voltage: 230 V~, potential-connected. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. white – 6725-500 6720-0-0008 158 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1/10 kg WaveLINE Wireless Control Transmitter 6747 AGM-204-500 Busch-Watchdog 220 WaveLINE Wireless movement detector for detecting thermal motion. With display for detection and status indication. With ground and rear-field detection. With high-quality lens for optimum detection. Surveillance density: 84 sectors with 336 switching segments. With integrated dismantling protection. All functions controlled by microprocessor. With automatic range stabilization. With automatic interference suppression. With automatic dazzle-proofing. With automatic battery monitoring. Battery type: Lithium batteries 1250 mAh (L92 AAA 1.5 V). Battery included in delivery. Battery service life: typically 5 years, therefore practically maintenance-free. With brightness-independent test mode for evaluating the detection zone. Individual adjustment of detection range via enclosed protective foil which can be cut to size. Combinable with switch actuator WaveLINE, 1gang, with extension unit 6701-101. Compatible with WaveLINE KNX gateway TP-RF 6770. For standalone and group operation. Switch-off delay: 3 min. (single mode), individually adjustable at actuator (group mode). Send frequency: 868 MHz. Free-field range: approx. 100 m. Rated voltage: 4.5 V–. Detection range: frontal: 16 m, lateral: 16 m. Detection angle: 220 °. Brightness limit value: 0.5 Lux – 300 Lux, Daytime operation. Mounting height: 2.5 m. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. brown – 6747 AGM-201-500 6700-0-0038 1 alpine white – 6747 AGM-204-500 6700-0-0035 1 silver metallic – 6747 AGM-208-500 6700-0-0036 1 anthracite – 6747 AGM-35-500 6700-0-0037 1 kg ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 159 A 15 WaveLINE Wireless Control Actuators, RF/ KNX Media Converters A 15 6701-101-500 WaveLINE switch actuator, 1gang, with extension unit NEW For wireless switching of electrical loads. Functions via radio control: ON/OFF, timer and light scene control. Functions via the extension unit: ON/OFF, timer and sending a radio control telegram. Operation also possible via conventional push-buttons (2020 US, 2012/6 UK). For Busch-Watchdog WaveLINE. For wall mounted transmitter Waveline 6731-xxx, 6732-xxx und 6733-xxx. For remote control WaveLINE 6780. For WaveLINE window position sensor 6720-6x. For WaveLINE 6721-xx universal signalling unit. For Busch-EnergyControl 6762-xx. Compatible with WaveLINE KNX gateway TP-RF 6770. Controllable up to 32 transmission addresses. Send/receive frequency: 868 MHz. Free-field range: approx. 100 m. Control element: Adjustable potentiometer. Display elements: Status indication of output via LED. Rated voltage: 230 V~, +10 % / -10 %. Rated frequency: 50 Hz. Inputs: 1. Polling voltage: 230 V~, Sensing pulse, L-wire. Outputs: 1x Normally open contact, potential-bound. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6702-500 6701-101-500 6700-0-0040 Switch actuator WaveLINE For wireless switching of electrical loads. For functions ON/OFF, timer and lightscene control. For wall mounted transmitter Waveline 6731-xxx, 6732-xxx und 6733-xxx. For remote control WaveLINE 6780. For WaveLINE window position sensor 6720-6x. For WaveLINE 6721-xx universal signalling unit. For Busch-EnergyControl 6762-xx. Compatible with WaveLINE KNX gateway TP-RF 6770. Controllable up to 32 transmission addresses. Send/receive frequency: 868 MHz. Free-field range: approx. 100 m. Control element: Adjustable potentiometer. Display elements: Status indication of output via LED. Rated voltage: 230 V~, +10 % / –10 %. Rated frequency: 50 Hz. Outputs: 1x Normally open contact, potential free. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6703-500 kg 1/10 6702-500 6700-0-0023 kg 1/10 2gang switch actuator WaveLINE For wireless switching of electrical loads. For operation mode 2gang switch, 2 separate outputs. For operation mode timer: output 1 (eg lighting), output 2: ON/Off delay in dependence of output 1 (eg fan control). For functions: ON/OFF and light scene control. For wall mounted transmitter Waveline 6731-xxx, 6732-xxx und 6733-xxx. For remote control WaveLINE 6780. For WaveLINE window position sensor 6720-6x. For WaveLINE 6721-xx universal signalling unit. For Busch-EnergyControl 6762-xx. Compatible with WaveLINE KNX gateway TPRF 6770. Controllable up to 32 transmission addresses. Send/receive frequency: 868 MHz. Free-field range: approx. 100 m. Control element: Adjustable potentiometer. Display elements: Status indication of output via LED. Rated voltage: 230 V~, +10 % / –10 %. Rated frequency: 50 Hz. Outputs: 2x Normally open contact, potential-bound. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6703-500 6700-0-0024 160 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1/10 kg WaveLINE Wireless Control Actuators, RF/ KNX Media Converters 6704-500 Universal dimming actuator WaveLINE For wireless switching and dimming of electrical loads. For functions ON/OFF, dimming and lightscene control. With soft ON/OFF function. With selectable light value storage. For wall mounted transmitter Waveline 6731-xxx, 6732-xxx und 6733-xxx. For remote control WaveLINE 6780. Compatible with WaveLINE KNX gateway TP-RF 6770. Repeater function can be activated for extended range. Controllable up to 32 transmission addresses. Send/receive frequency: 868 MHz. Free-field range: approx. 100 m. Control element: Adjustable potentiometer. Display elements: Status indication of output via LED. Rated voltage: 230 V~, +10 % / –10 %. Rated frequency: 50 Hz. Outputs: 1x dimming channel. Suitable for: 230 V incandescent lamps. Output voltage: 230 V~. Rated power: 35 – 210 W. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6705-101-500 6704-500 6700-0-0025 WaveLINE series/blind actuator with extension unit NEW For wireless switching of electrical loads. For driving and adjusting blinds/shutters and awnings over radio. Functions via radio control: 2gang switch, blind switch and light scene control. Functions via extension unit: 2gang switch, blind switch and send radio control telegram. Operation also possible via conventional push-buttons (2020 US, 2012/6 UK). For wall mounted transmitter Waveline 6731-xxx, 6732-xxx und 6733-xxx. For remote control WaveLINE 6780. For WaveLINE window position sensor 6720-6x. For WaveLINE 6721-xx universal signalling unit. For Busch-EnergyControl 6762-xx. Compatible with WaveLINE KNX gateway TP-RF 6770. Controllable up to 32 transmission addresses. Send/receive frequency: 868 MHz. Free-field range: approx. 100 m. Control element: Adjustable potentiometer. Display elements: Status indication of output via LED. Rated voltage: 230 V~, +10 % / –10 %. Rated frequency: 50 Hz. Inputs: 2. Polling voltage: 230 V~, Sensing pulse, L-wire. Outputs: 2x Normally open contact, potential-bound. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6770-500 kg 1/10 6705-101-500 6700-0-0042 kg 1/10 KNX TP/RF WaveLine Gateway, SM Media converter with internal antenna for conversion of KNX RF WaveLine radio signals to KNX twisted pair networks with 24 channels. For the evaluation and transfer of up to 24 channels each with 4 sub-channels as transmitter or receiver. Simple operation due to “programming button” and display on the device. Is surface-mounted. The KNX/WaveLine Gateway is powered via KNX and does not require an additional power supply. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6770-500 6770-0-0002 kg 1 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 161 A 15 WaveLINE Wireless Control Window Sensor, Universal Detector A 15 6730-214 WaveLINE LED display For status display of window handle positions: open = red, closed = green, tilted = yellow. Direct onsite operation possible for switching / dimming an electrical device depending on the flush-mounted insert. 4 individual LED display channels. Up to 8 WaveLine transmitters can be taught-in on each LED display channel. Up to 8 WaveLine transmitters can be taught-in on onsite operation. User-friendly start-up without PC / software. Printed labelling sheet with 8 different inlay sheets (see labelling sheet 1799 xx). For WaveLINE window position sensor 6720-6x. For WaveLINE 6721-xx universal signalling unit. For Busch-Watchdog 220 WaveLINE 6747 AGM. For Busch-Universal relay switch insert 6404 U. For universal dimmer switch insert 6595 U. Free-field range: approx. 100 m. Send/receive frequency: 868 MHz. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg Busch-Duro 2000 SI ® white – 6730-212 6730-0-0001 1 – 6730-214 6730-0-0002 1 Reflex SI alpine white 6730-24G WaveLINE LED display For status display of window handle positions: open = red, closed = green, tilted = yellow. Direct onsite operation possible for switching / dimming an electrical device depending on the flush-mounted insert. 4 individual LED display channels. Up to 8 WaveLine transmitters can be taught-in on each LED display channel. Up to 8 WaveLine transmitters can be taught-in on onsite operation. User-friendly start-up without PC / software. Printed labelling sheet with 8 different inlay sheets (see labelling sheet 1799 xx). For WaveLINE window position sensor 6720-6x. For WaveLINE 6721-xx universal signalling unit. For Busch-Watchdog 220 WaveLINE 6747 AGM. For Busch-Universal relay switch insert 6404 U. For universal dimmer switch insert 6595 U. For ABB i-bus® KNX devices 6110 U, 6114 U, 6120 U-102. Free-field range: approx. 100 m. Send/receive frequency: 868 MHz. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. alpha platinum bronze 3) – – 6730-20 6730-21 6730-0-0007 6730-0-0008 1 1 ivory – 6730-22G 6730-0-0009 1 studio white matt – 6730-24 6730-0-0010 1 studio white – 6730-24G 6730-0-0011 1 palladium – 6730-260 6730-0-0005 1 – 6730-266 6730-0-0006 1 titanium 3) 3) 3) 162 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 kg WaveLINE Wireless Control Window Sensor, Universal Detector 6730-84 WaveLINE LED display For status display of window handle positions: open = red, closed = green, tilted = yellow. Direct onsite operation possible for switching / dimming an electrical device depending on the flush-mounted insert. 4 individual LED display channels. Up to 8 WaveLine transmitters can be taught-in on each LED display channel. Up to 8 WaveLine transmitters can be taught-in on onsite operation. User-friendly start-up without PC / software. Printed labelling sheet with 8 different inlay sheets (see labelling sheet 1799 xx). For WaveLINE window position sensor 6720-6x. For WaveLINE 6721-xx universal signalling unit. For Busch-Watchdog 220 WaveLINE 6747 AGM. For Busch-Universal relay switch insert 6404 U. For universal dimmer switch insert 6595 U. Free-field range: approx. 100 m. Send/receive frequency: 868 MHz. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. kg future linear ® anthracite ivory white – – 6730-81 6730-82 6730-0-0014 6730-0-0015 1 1 – 6730-83 6730-0-0016 1 – 6730-84 6730-0-0017 1 – 6730-884 6730-0-0026 1 1) – 6730-885 6730-0-0027 1 ivory white studio white – – 6730-82 6730-84 6730-0-0015 6730-0-0017 1 1 – 6730-803 6730-0-0025 1 – 6730-815 6730-0-0024 1 – – 6730-84 6730-896-500 6730-0-0017 6730-0-0066 1 1 – – 6730-81 6730-82 6730-0-0014 6730-0-0015 1 1 – 6730-84 6730-0-0017 1 – 6730-866 6730-0-0023 1 aluminium silver 1) studio white studio white, matt black matt solo 1) ® grey metallic 1) yellow Busch-axcent® studio white chalet-white carat® 2) anthracite ivory white studio white pure stainless steel stainless steel 1) ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 163 A 15 WaveLINE Wireless Control Window Sensor, Universal Detector A 15 6404 U Busch-Universal relay switch insert For switching incandescent lamps, 230 V tungsten halogen lamps, fluorescent lamps and lowvoltage halogen lamps, that are actuated via transformers. 3 wire connection (neutral conductor required). With operating mode switch for operating mode: switch, time switch. Operation also possible via conventional push buttons (2020 US, 2021/6 UK). For LED display WaveLINE 6730-xxx. Rated voltage: 230 V~, +10 % / –10 %. Rated frequency: 50 Hz. Inputs: 1. Polling voltage: 230 V~, Sensing pulse, L-wire. Outputs: 1x Normally open contact, potential-bound. Suitable for: ohmic, capacitive and inductive loads. Rated current: 10 AX. Rated power: 2300 W/VA. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6595 U 6404 U 6401-0-0055 kg 1 Universal Dimmer Switch Insert For dimming and switching of incadescent lamps, 230 V halogen lamps and low-voltage halogen lamps with conventional or electronic transformers. 2-wire connection (neutral conductor not required). With soft ON/OFF function. Operation also possible via conventional push buttons (2020 US, 2021/6 UK). Do not operate conventional transformers and electronic transformers together on the universal dimmer switch insert. For LED display WaveLINE 6730-xxx. Rated voltage: 230 V~, +10 % / –10 %. Rated frequency: 50 Hz. Inputs: 1. Polling voltage: 230 V~, Sensing pulse, L-wire. Outputs: 1x electronic output, potential-bound. Suitable for: ohmic, capacitive and inductive loads. Rated power: 60 – 450 W/VA. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – 6595 U 6590-0-0188 164 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg WaveLINE Wireless Control Window Sensor, Universal Detector 6720-64 WaveLINE window sensor For monitoring and transmission of the current window handle position (window open, closed, tilted). The WaveLINE window sensor transmits the current window handle position immediately upon operation. Existing window handle is used. The WaveLINE window sensor is installed between the existing window handle and window frame. Suitable for window handle: 7 mm square fastener, 43 mm attachment screw separation, lifter dia. 10 and 12 mm, max. mounting plate size 34 x 77 mm (WxH). No wire laying required. Accessories for assembly (square fastener extension, screws, adapter for lifter) of the WaveLINE window position sensor included in delivery. Battery included in delivery. Battery service life: typically 5 years, therefore practically maintenance-free. Monitoring of battery life and transmission of battery condition. For LED display WaveLINE 6730-xxx. For flush-mounted WaveLINE actuators 6701-101, 6702, 6703, 6704 and 6705-101. Compatible with WaveLINE KNX gateway TP-RF 6770. Free-field range: approx. 100 m. Send frequency: 868 MHz. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. studio white matt basalt black stainless steel 6721-64 1) – 6720-64 6720-0-0001 kg 1 – 6720-65 6720-0-0002 1 – 6720-66 6720-0-0003 1 WaveLINE universal sensor For monitoring and transmission of the state (open, closed) of dormer windows, skylights, doors and gates. For window surveillance with open fireplace and extractor hood pursuant to Article 4 of the German Fire Prevention Regulations. Additional connection option for an external, potential-free sensor (choice of normally closed or normally open contact). Isolated evaluation and monitoring of channels. The WaveLINE universal sensor immediately transmits the current information when there is a change in state. Addition cyclic transmission for monitoring of the transmission link and the fault-free state of equipment. Attachment of WaveLINE universal sensor and magnets by using adhesive foil or screws. Accessories (adhesive foil, screws, magnet) included in delivery. Battery included in delivery. Battery service life: typically 5 years, therefore practically maintenance-free. Monitoring of battery life and transmission of battery condition. For LED display WaveLINE 6730-xxx. For flush-mounted WaveLINE actuators 6701101, 6702, 6703, 6704 and 6705-101. Compatible with WaveLINE KNX gateway TP-RF 6770. External sensor max. wire length: 5 m. External sensor terminal connection diameter : 0.14...0.5 mm² (single wire). Free-field range: approx. 100 m. Send frequency: 868 MHz. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. studio white matt – 6721-64 6720-0-0004 1 basalt black – 6721-65 6720-0-0005 1 kg 1) Surface painted. ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 165 A 15 Newron Integration in Building Management Systems A 15 Modern buildings today are more than merely the expression of future-oriented architecture. Integral systems must do justice to the increasing demands for energy efficiency, comfort, safety and profitable operation. For this, real estate needs intelligence in the form of well-designed technology. It is used to integrate information of the entire building auto-mation and to control heating and cooling systems, ventilation and air conditioning systems, lighting, sun-shading systems, as well as fire protection and safety systems. Depending on the type of its use, a building presents special challenges to everyone concerned. That is why Busch-Jaeger, as subsidiary of the expert global brand ABB, now offers an integral solution – Building Space. Under this umbrella all available expert know-how of building automation as well as the electrical and building systems technology sectors is merged as solution for buildings of the future. This portfolio of products and services is unique. With this growing power of expertise, efficient buildings can be made a reality safely and reliably – from functional buildings up to exclusive luxury hotels. And that on an international level. This how impressive solutions with the greatest possible freedom for design and implementation are created. Because Building Space solutions adapt themselves precisely to the respective object and its use. Even later modifications and extensions are possible at any time. When the building is to be used later for a different purpose, for example. Newron solutions guarantee an assured future and efficient operation. Thanks to openness and flexibility they are suitable for a complete IT and architectural building management solution for intelligent functional buildings. E ffic i e n cy a b i li t y P ro fit Energy efficiency Building automation Co m fo Safety rt Desi gn Building Space Light switch & System technology Sim p lici t y 166 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Newron Total Networking A 16 System integrators can now work even more efficiently. Because with the innovative Newron solutions ABB and Busch-Jaeger offer simple and efficient possibilities for intelligent building management. More possibilities in less time. Newron solutions allow a simple and flexible data exchange to take place between the different levels of a building management system and the most commonly used protocols used in functional buildings. And here the solutions support all open standards such as BACnet, LON, KNX, Modbus, OPC, M-Bus and oBIX. This kind of flexib ility allows devices of different manufacturers and different protocol families to be combined in a building in a very simple way. The performance of the system is designed for processing large amounts of data and the efficient integration of numerous data points. The outstanding features of Newron solutions are the intuitively operable user interface and the easy-to-understand internal architecture. They are ideally suited for medium to large projects in functional buildings. Newron solutions offer the system integrator the working environment for processing major projects more efficiently and to simultaneously reduce integration time. Newron solutions follow an integrating approach and are therefore the direct interface to all central levels of intelligent building management. They form the bridge between technical system components and management level. Newron in a practical way supplements the numerous innovative KNX solutions for building automation in the existing program and rounds off the portfolio. For planners and system integrators Newron opens new possibilities and a highly attractive field of business – for example, the integration of KNX into the different trades of a building management system. Tel Aviv Museum of Art, Herta & Paul Amir Building Newron solutions support distributed IT architecture as well as IP convergence. The term convergence in general means the integration of forms of communication based on different technologies into a single network. IP convergence in the context of building management refers to the integration of different bus systems into one IP network. IP convergence offers a number of advantages with regard to expandability, performance, a uniform infrastructure as well as the possibility of joint management. This creates the prerequisites for the integral, service-oriented consideration of information processing. ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 167 Newron All the advantages at a glance A 16 doMOOV doMOOV is a building management software for building automation and makes possible the exchange of data between different protocols. The user-friendly interface and the simple internal structure ensure short programming times and facili tate modification and adaptation. Software solution »Fast to configure »User-friendly HMI (Human Machine Interface) »Supports decentralized IT structure »Multi-protocol gateway – supports the protocols: KNX, LonWorks, BACnet, Modbus, M-bus »Universal SCADA server OPC, BACnet, oBIX »Integrated services: schedule/calendar, trends, alarms 168 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Newron A 16 doGATE doGATE is an automation server optimized to doMOOV that is equipped with all necessary physical interfaces, which can also take over backup and remote control functions related to rooms. MOOVnGROUP MOOVnGROUP is an engineering tool, which as application for the KNX commissioning software ETS4 with a graphic user interface, facilitates the setup and editing of KNX projects. Here for example group addresses are automatically generated. Automation-Server »Automation server that works functionally stable »A ttuned to the requirements of functional buildings and the building management software doMOOV »Makes available all necessary interfaces »Redundancy: can be defined as backup device »A dditional functions: virtual remote control and Web Dashboard Graphic engineering tool »Graphic engineering tool for the ETS 4 »Zone concept: simple, fast setup/modification of rooms/ connections, as well as modification of parameters »R eduction of complexity due to the automatic generation of group addresses »Working with templates: reuse of created device and zone templates »Automatic generation of data for Web Dashboard, virtual remote control LIZ, BACnet objects for SCADA (visualization) and trend data points ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 169 Newron A 16 doGATE Automation-Server 1) 2) 3) NEW For 1,000 data points Multi-Protocol Gateway that enables the integration of different protocols over TCP/IP in a Building Management System (BMS) and allows data exchange between the protocols. The integrated BACnet server offers scheduler, trend and alarm services. Data import of standard data bases (ETS for KNX, LNS for LON, EDE for BACnet) and MS Excel is supported. Enables decentralized IT structure. Redundancy: can be defined as backup device. Offers additional functions: virtual remote control and Web-Dashboard. Supports the protocols KNX, BACnet, LonWorks, Modbus, M-Bus. By default supported protocol/server: Modbus protocol and BACnet server. Optional 1 additional protocol: KNX, BACnet or LONWorks. Optional 2 additional protocols: KNX, BACnet or LONWorks. Optional 3 additional protocols: KNX, BACnet and LONWorks. For further information please contact central sales service of ABB Busch-Jaeger Elektro GmbH. Rated voltage: 10 – 28 V–. Protection class (Device): IP 20. Temperature range (Device): 0 °C to 55 °C. Dimensions: (L x W x D): 252 mm x 199 mm x 33 mm. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. By default – DGT-0-1K-AB 8110-0-0001 1 additional protocol – DGT-1-1K-AB 8110-0-0002 2 additional protocols – DGT-2-1K-AB 8110-0-0003 3 additional protocols – DGT-3-1K-AB 8110-0-0004 1 doGATE MOOVnGROUP license 3) For 100 devices Runtime license for MOOVnGROUP. For usage in combination with Automation-Server doGATE. Description MW Type Order code NEW Price Pack Weight 1 pc. unit 1 pc. E pc. – DGT-MNG-100-AB 8110-0-0023 kg kg 1 doGATE Web-Dashboard-VIS license 3) NEW For 1,000 data points Runtime license for Web-Dashboard-VIS. Web-Dashboard is a visualization based in the Automation-Server doGate and allows to display/modify data points, trends, scheduler and alarms. Web-Dashboard supports HTML5 standard. Can be combined with all popular windows browsers. Web-Dashboard data’s are automatically generated from the predefined MOOVnGROUP zones. All other doGATE datapoints can be added manually. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – DGT-VIS-1K-AB 8110-0-0030 1) Scope of doGATE services is managed by license keys. 2) Usage of, the into doGATE integrated software on Windows PC is possible. 3) without picture 170 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 1 kg Newron doGATE Virtual remote control-LIZ license 1) NEW For 100 zones Runtime license for virtual remote control-LIZ. For usage in combination with Automation-Ser ver doGATE. Via LIZ rooms (zones) can be controlled by smartphone (Android, iPhone) or PC widget. LIZ data’s are automatically generated from the predefined MOOVnGROUP zones. The user makes a LIZ spatial control. The different rooms are enabled by passwords. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – DGT-LIZ-100-AB 8110-0-0036 doGATE M-Bus protocol 1) Additional protocol for Automation-Server doGATE. Protocol: M-Bus. Description MW Type Order code NEW Price Pack Weight 1 pc. unit 1 pc. E pc. – DGT-MBU-AB 8110-0-0017 kg 1 kg 1 doGATE OPC server 1) NEW Permits to bring data up to SCADA/Visualization into OPC, from one or several doGATEs. Runs on an external computer. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – DGT-OPC-AB 8110-0-0018 kg 1 doGATE MDRC Mounting kit 1) NEW For vertical or horizontal mounting of Automation-Server doGATE on mounting rail TS 35. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – DGT-DIN-AB 8110-0-0020 doGATE Obix server 1) Additional Obix server for Automations-Server doGATE. Server: Obix. Description MW Type Order code NEW Price Pack Weight 1 pc. unit 1 pc. E pc. – DGT-OBI-AB 8110-0-0022 kg 1 kg 1 doGATE Power supply 1) NEW Power supply for Automation-Server doGATE with main connection cable including connectors for various power outlets. Rated voltage: 100 - 240 V~. Secondary: 19 V–. Rated frequency: 47 Hz/63 Hz. Description MW Type Order code Price Pack Weight 1 pc. unit 1 pc. E pc. – DGT-PWR-AB 8110-0-0019 kg 1 1) without picture ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 171 A 16 A A 16 172 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Appendix Selection Table According to Order Code 174 Selection Table According to Type 189 B ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 173 Selection Table According to Order Code B Order code Type EAN PG 1754-0-4107 1754-0-4108 1754-0-4112 1754-0-4113 1754-0-4231 1754-0-4232 1754-0-4233 1754-0-4234 1754-0-4238 1754-0-4240 1754-0-4241 1754-0-4242 1754-0-4243 1754-0-4244 1754-0-4254 1754-0-4255 1754-0-4256 1754-0-4257 1754-0-4258 1754-0-4259 1754-0-4260 1754-0-4261 1754-0-4309 1754-0-4310 1754-0-4319 1754-0-4320 1754-0-4321 1754-0-4322 1754-0-4323 1754-0-4323 1754-0-4325 1754-0-4327 1754-0-4328 1754-0-4329 1754-0-4330 1754-0-4331 1754-0-4332 1754-0-4333 1754-0-4334 1754-0-4335 1754-0-4336 1754-0-4337 1754-0-4338 1754-0-4339 1754-0-4340 1754-0-4341 1754-0-4342 1754-0-4343 1754-0-4344 1754-0-4345 1754-0-4346 1754-0-4347 1754-0-4348 1754-0-4349 1754-0-4350 1754-0-4351 1754-0-4352 1754-0-4353 1754-0-4354 1754-0-4355 1754-0-4356 1754-0-4357 1754-0-4358 1724-80 1725-80 1724-84 1725-84 1722-182K 1723-182K 1724-182K 1725-182K 1724-184K 1721-181K 1722-181K 1723-181K 1724-181K 1725-181K 1721-860 1722-860 1723-860 1724-860 1721-821 1722-821 1723-821 1724-821 1724-183K 1725-183K 1723-866K 1724-866K 1725-866K 1721-825 1722-825 1722-825 1724-825 1722-80G 1723-80G 1724-80G 1725-80G 1721-284 1722-284 1723-284 1721-285 1722-285 1723-285 1721-286 1722-286 1723-286 1721-287 1722-287 1723-287 1721-288 1722-288 1723-288 1724-284 1725-284 1724-285 1725-285 1724-286 1725-286 1724-287 1725-287 1724-288 1725-288 1721-823-101 1722-823-101 1723-823-101 40 11395 99488 7 40 11395 99492 4 40 11395 99617 1 40 11395 99619 5 40 11395 05070 5 40 11395 05071 2 40 11395 05073 6 40 11395 05074 3 40 11395 05078 1 40 11395 05080 4 40 11395 05081 1 40 11395 05082 8 40 11395 05083 5 40 11395 05084 2 40 11395 05679 0 40 11395 05681 3 40 11395 05683 7 40 11395 05685 1 40 11395 05687 5 40 11395 05689 9 40 11395 05691 2 40 11395 05693 6 40 11395 07483 1 40 11395 07484 8 40 11395 08837 1 40 11395 08839 5 40 11395 08842 5 40 11395 08891 3 40 11395 08892 0 40 11395 08892 0 40 11395 08894 4 40 11395 11306 6 40 11395 11307 3 40 11395 11308 0 40 11395 11309 7 40 11395 11324 0 40 11395 11325 7 40 11395 11326 4 40 11395 11327 1 40 11395 11328 8 40 11395 11329 5 40 11395 11331 8 40 11395 11332 5 40 11395 11333 2 40 11395 11334 9 40 11395 11335 6 40 11395 11336 3 40 11395 11337 0 40 11395 11338 7 40 11395 11339 4 40 11395 11341 7 40 11395 11342 4 40 11395 11343 1 40 11395 11344 8 40 11395 11345 5 40 11395 11346 2 40 11395 11347 9 40 11395 11348 6 40 11395 11349 3 40 11395 11351 6 40 11395 11522 0 40 11395 11523 7 40 11395 11524 4 4 4 1 1 1 1 1 1 1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1 1 1 4 4 4 4 4 4 4 4 4 4 4 4 1 1 4 4 4 4 4 4 4 4 4 4 4 174 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Page 87 87 87 87 86 86 86 86 86 86 86 86 86 86 87 87 87 87 87 87 87 87 86 86 88 88 88 87 87 87 87 87 87 87 87 88 88 89 88 88 89 88 88 89 88 88 89 88 88 89 89 89 89 89 89 89 89 89 89 89 87 87 87 Selection Table According to Order Code Order code Type EAN PG 1754-0-4359 1754-0-4360 1754-0-4361 1754-0-4362 1754-0-4363 1754-0-4409 1754-0-4410 1754-0-4411 1754-0-4412 1754-0-4413 1754-0-4415 1754-0-4416 1754-0-4417 1754-0-4418 1754-0-4421 1754-0-4422 1754-0-4423 1754-0-4437 1754-0-4438 1754-0-4439 1754-0-4440 1754-0-4441 1754-0-4442 1754-0-4443 1754-0-4444 1754-0-4445 1754-0-4471 1754-0-4472 1754-0-4473 1754-0-4474 1754-0-4475 1754-0-4476 1754-0-4477 1754-0-4478 1754-0-4479 1754-0-4480 1754-0-4481 1754-0-4482 1754-0-4483 1754-0-4484 1754-0-4485 1754-0-4486 1754-0-4487 1754-0-4488 1754-0-4489 1754-0-4490 1754-0-4491 1754-0-4492 1754-0-4493 1754-0-4494 1754-0-4495 1754-0-4498 1754-0-4499 1754-0-4500 1754-0-4501 1754-0-4502 1754-0-4506 1754-0-4517 1754-0-4529 1754-0-4530 1754-0-4531 1754-0-4532 1754-0-4533 1724-823-101 1721-826-101 1722-826-101 1723-826-101 1724-826-101 1721-281 1722-281 1723-281 1724-281 1725-281 1722-884K 1723-884K 1724-884K 1725-884K 1723-885K 1724-885K 1725-885K 1721-280 1722-280 1723-280 1724-280 1725-280 1721-811 1722-811 1723-811 1724-811 1721-291-500 1722-291-500 1723-291-500 1724-291-500 1725-291-500 1721-297-500 1722-297-500 1723-297-500 1724-297-500 1725-297-500 1721-299-500 1722-299-500 1723-299-500 1724-299-500 1725-299-500 1721-296-500 1722-296-500 1723-296-500 1724-296-500 1725-296-500 1721-295-500 1722-295-500 1723-295-500 1724-295-500 1725-295-500 1721-184K-500 1722-184K-500 1721-866K-500 1722-866K-500 1723-184K-500 1721-182K-500 1725-184K-500 1721-183K-500 1722-183K-500 1721-884K-500 1721-885K-500 1723-183K-500 40 11395 11525 1 40 11395 11526 8 40 11395 11527 5 40 11395 11528 2 40 11395 11529 9 40 11395 12636 3 40 11395 12637 0 40 11395 12638 7 40 11395 12639 4 40 11395 12661 5 40 11395 12825 1 40 11395 12826 8 40 11395 12827 5 40 11395 12828 2 40 11395 12832 9 40 11395 12833 6 40 11395 12834 3 40 11395 15695 7 40 11395 15696 4 40 11395 15697 1 40 11395 15698 8 40 11395 15699 5 40 11395 15701 5 40 11395 15702 2 40 11395 15703 9 40 11395 15704 6 40 11395 16507 2 40 11395 16519 5 40 11395 16531 7 40 11395 16542 3 40 11395 16553 9 40 11395 16515 7 40 11395 16526 3 40 11395 16537 9 40 11395 16548 5 40 11395 16559 1 40 11395 16517 1 40 11395 16528 7 40 11395 16539 3 40 11395 16551 5 40 11395 16562 1 40 11395 16512 6 40 11395 16524 9 40 11395 16535 5 40 11395 16546 1 40 11395 16557 7 40 11395 16509 6 40 11395 16522 5 40 11395 16533 1 40 11395 16544 7 40 11395 16555 3 40 11395 17452 4 40 11395 17453 1 40 11395 17454 8 40 11395 17455 5 40 11395 17456 2 40 11395 17460 9 40 11395 17472 2 40 11395 17594 1 40 11395 17595 8 40 11395 17596 5 40 11395 17597 2 40 11395 17599 6 4 4 4 4 4 4 4 4 4 4 1 1 1 1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1 1 1 1 1 4 4 4 4 4 1 1 4 4 1 1 1 4 4 1 4 4 Page 87 87 87 87 87 88 88 89 89 89 86 86 86 86 86 86 86 88 88 89 89 89 87 87 87 87 88 88 89 89 89 88 88 89 89 89 88 88 89 89 89 88 88 89 89 89 88 88 89 89 89 86 86 88 88 86 86 86 86 86 86 86 86 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 175 B Selection Table According to Order Code B Order code Type EAN PG Page 1754-0-4534 1754-0-4535 1754-0-4536 1754-0-4537 1754-0-4538 1754-0-4539 1754-0-4540 1754-0-4541 1754-0-4543 1754-0-4544 1754-0-4545 1754-0-4546 1754-0-4547 2CDG110002R0011 2CDG110003R0011 2CDG110004R0011 2CDG110005R0011 2CDG110006R0011 2CDG110007R0011 2CDG110008R0011 2CDG110009R0011 2CDG110012R0011 2CDG110013R0011 2CDG110014R0011 2CDG110024R0011 2CDG110025R0011 2CDG110026R0011 2CDG110028R0011 2CDG110029R0011 2CDG110030R0011 2CDG110032R0011 2CDG110034R0011 2CDG110058R0011 2CDG110059R0011 2CDG110060R0011 2CDG110061R0011 2CDG110065R0011 2CDG110066R0011 2CDG110067R0011 2CDG110070R0011 2CDG110071R0011 2CDG110072R0011 2CDG110073R0011 2CDG110074R0011 2CDG110075R0011 2CDG110079R0011 2CDG110080R0011 2CDG110081R0011 2CDG110083R0011 2CDG110084R0011 2CDG110086R0011 2CDG110087R0011 2CDG110088R0011 2CDG110089R0011 2CDG110090R0011 2CDG110091R0011 2CDG110092R0011 2CDG110093R0011 2CDG110094R0011 2CDG110095R0011 2CDG110096R0011 2CDG110098R0011 2CDG110100R0011 1722-885K-500 1721-80-500 1721-84-500 1722-80-500 1721-80G-500 1722-84-500 1723-80-500 1723-84-500 1721-283 1722-283 1723-283 1724-283 1725-283 SA/M 2.6.1 JA/M 2.230.1 JA/M 2.24.1 BE/M 4.230.1 BE/M 4.24.1 BE/M 4.12.1 USB/S 1.1 DSA/S 2.16.1 UD/M 1.300.1 ES/M 2.230.1 ES/M 2.24.1 SCM/S 1.1 DG/S 8.1 DG/S 1.1 JA/S 4.SMI.1M DR/S 4.1 AE/S 4.2 WS/S 4.1 WZ/S 1.1 ES/S 4.1.2.1 ES/S 8.1.2.1 DSM/S 1.1 IPR/S 2.1 US/U 12.2 EUB/S 1.1 BDB/S 1.1 NTU/S 12.2000.1 UK/S 32.2 ABZ/S 2.1 ABL/S 2.1 UD/S 2.300.2 XS/S 1.1 SD/S 2.16.1 SD/S 4.16.1 SD/S 8.16.1 ZS/S 1.1 FCA/S 1.1M AE/A 2.1 LR/S 2.16.1 LR/S 4.16.1 LF/U 2.1 BE/S 4.20.2.1 BE/S 4.230.2.1 BE/S 8.20.2.1 BE/S 8.230.2.1 RM/S 1.1 RM/S 2.1 NTI/Z 28.30.1 IPS/S 2.1 SA/M 2.16.1 40 11395 17600 9 40 11395 17611 5 40 11395 17612 2 40 11395 17613 9 40 11395 17615 3 40 11395 17616 0 40 11395 17617 7 40 11395 17623 8 40 11395 18556 8 40 11395 18557 5 40 11395 18558 2 40 11395 18559 9 40 11395 18561 2 40 16779 58314 5 40 16779 58315 2 40 16779 58316 9 40 16779 58311 4 40 16779 58312 1 40 16779 58313 8 40 16779 58921 5 40 16779 58584 2 40 11395 04281 6 40 16779 58361 9 40 16779 58362 6 40 16779 58391 6 40 16779 58582 8 40 16779 58583 5 40 16779 65423 4 40 16779 58755 6 40 16779 58763 1 40 16779 58771 6 40 16779 58612 2 40 16779 67206 1 40 16779 67207 8 40 16779 65205 6 40 16779 65229 2 40 16779 65012 0 40 16779 64991 9 40 16779 65753 2 40 16779 68117 9 40 16779 65577 4 40 16779 65236 0 40 16779 65264 3 40 16779 66306 9 40 16779 66704 3 40 16779 65996 3 40 16779 65937 6 40 16779 65918 5 40 16779 66207 9 40 16779 66508 7 40 16779 66401 1 40 16779 66405 9 40 16779 66489 9 40 16779 66416 5 40 16779 71078 7 40 16779 71106 7 40 16779 71076 3 40 16779 71077 0 40 16779 66556 8 40 16779 66567 4 40 16779 66316 8 40 16779 66484 4 40 16779 68158 2 4 4 1 4 4 1 4 1 4 4 4 4 4 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 86 87 87 87 87 87 87 87 88 88 89 89 89 17 17 17 17 17 17 12 39 18 18 18 139 38 38 35 8 24 25 25 49 49 13 10 23 137 137 9 55 53 53 40 144 40 40 40 114 50 24 40 40 40 23 23 23 23 19 19 8 10 17 176 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Order Code Order code Type EAN PG Page 2CDG110101R0011 2CDG110103R0011 2CDG110104R0011 2CDG110106R0011 2CDG110107R0011 2CDG110108R0011 2CDG110109R0011 2CDG110110R0011 2CDG110111R0011 2CDG110112R0011 2CDG110113R0011 2CDG110114R0011 2CDG110116R0011 2CDG110117R0011 2CDG110119R0011 2CDG110120R0011 2CDG110121R0011 2CDG110122R0011 2CDG110124R0011 2CDG110125R0011 2CDG110126R0011 2CDG110128R0011 2CDG110129R0011 2CDG110130R0011 2CDG110131R0011 2CDG110132R0011 2CDG110133R0011 2CDG110134R0011 2CDG110135R0011 2CDG110136R0011 2CDG110137R0011 2CDG110138R0011 2CDG110141R0011 2CDG110142R0011 2CDG110143R0011 2CDG110144R0011 2CDG110145R0011 2CDG110146R0011 2CDG110148R0011 2CDG110150R0011 2CDG110152R0011 2CDG110153R0011 2CDG110154R0011 2CDG110155R0011 2CDG110156R0011 2CDG110157R0011 2CDG110158R0011 2CDG110159R0011 2CDG110160R0011 2CDG110161R0011 2CDG110162R0011 2CDG110163R0011 2CDG110164R0011 2CDG110165R0011 2CDG110166R0011 2CDG110167R0011 2CDG110168R0011 2CDG110169R0011 2CDG110170R0011 2CDG110171R0011 2CDG110172R0011 2CDG110174R0011 2CDG110178R0011 DLR/S 8.16.1M DG/S 1.16.1 RC/A 4.2 RC/A 8.2 SD/M 2.6.2 LR/M 1.6.2 MT/S 4.12.2M MT/S 8.12.2M MT/U 2.12.2 SA/S 2.16.6.1 SA/S 4.16.6.1 SA/S 8.16.6.1 VAA/S 6.230.2.1 VAA/S 12.230.2.1 TG/Z 1.1 JRA/S 2.230.2.1 JRA/S 4.230.2.1 JRA/S 8.230.2.1 JRA/S 2.230.5.1 JRA/S 4.230.5.1 JRA/S 8.230.5.1 JRA/S 4.24.5.1 JRA/S 2.230.1.1 JRA/S 4.230.1.1 JRA/S 8.230.1.1 SA/S 2.16.5.1 SA/S 4.16.5.1 SA/S 8.16.5.1 TG/S 3.2 SE/S 3.16.1 SA/S 12.16.5.1 SA/S 12.16.6.1 FCA/S 1.2.2.1 DGN/S 1.16.1 SJR/S4.24.2.1 SV/S 30.160.1.1 SV/S 30.320.2.1 SV/S 30.640.5.1 EM/S 3.16.1 GM/A 8.1 SA/S 4.6.1.1 SA/S 8.6.1.1 SA/S 12.6.1.1 SA/S 2.10.2.1 SA/S 4.10.2.1 SA/S 8.10.2.1 SA/S 12.10.2.1 SA/S 2.16.2.1 SA/S 4.16.2.1 SA/S 8.16.2.1 SA/S 12.16.2.1 FCL/S 1.6.1.1 FCL/S 2.6.1.1 RM/S 3.1 SV/S 30.320.1.1 SV/S 30.640.3.1 IO/S 4.6.1.1 IO/S 8.6.1.1 RM/S 4.1 LK/S 4.2 DLR/A 4.8.1.1 WA/Z 1.1 MG/E 4.4.1 40 16779 67656 4 40 16779 66950 4 40 16779 67647 2 40 16779 68126 1 40 16779 68066 0 40 16779 68067 7 40 16779 71187 6 40 16779 71186 9 40 16779 71176 0 40 16779 70830 2 40 16779 70831 9 40 16779 70832 6 40 16779 82986 1 40 16779 82987 8 40 16779 69788 0 40 16779 69839 9 40 16779 69840 5 40 16779 69841 2 40 16779 69843 6 40 16779 69844 3 40 16779 69845 0 40 16779 69847 4 40 16779 69848 1 40 16779 69849 8 40 16779 69850 4 40 16779 70827 2 40 16779 70828 9 40 16779 70829 6 40 16779 70851 7 40 16779 70977 4 40 16779 71107 4 40 16779 76516 9 40 16779 87727 5 40 16779 84556 4 40 16779 86446 6 40 16779 86666 8 40 16779 83766 8 40 16779 86669 9 40 16779 87706 0 40 16779 90630 2 40 16779 87786 2 40 16779 87785 5 40 16779 87784 8 40 16779 87783 1 40 16779 87782 4 40 16779 87781 7 40 16779 87780 0 40 16779 87779 4 40 16779 87778 7 40 16779 87777 0 40 16779 87776 3 40 16779 87788 6 40 16779 87787 9 40 16779 88106 7 40 16779 90619 7 40 16779 90621 0 40 16779 88107 4 40 16779 88108 1 40 16779 88126 5 40 16779 88167 8 40 16779 88237 8 40 16779 90637 1 40 16779 92549 5 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 39 38 16 16 17 18 139 139 139 30 30 30 49 49 55 34 34 34 34 34 34 34 35 35 35 30 30 30 55 114 30 30 50 38 35 6 7 7 114 143 29 29 29 29 29 29 29 29 29 29 29 50 50 19 6 6 30 30 19 10 39 143 143 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 177 B Selection Table According to Order Code B Order code Type EAN PG Page 2CDG110180R0011 2CDG110181R0011 2CDG110182R0011 2CDG110183R0011 2CDG110184R0011 2CDG110186R0011 2CDG110190R0011 2CDG110191R0011 2CDG120001R0011 2CDG120002R0011 2CDG120004R0011 2CDG120005R0011 2CDG120006R0011 2CDG120007R0011 2CDG120008R0011 2CDG120009R0011 2CDG120010R0011 2CDG120011R0011 2CDG120012R0011 2CDG120032R0011 2CDG120033R0011 2CDG120034R0011 2CDG120035R0011 2CDG120036R0011 2CDG120037R0011 2CDG120038R0011 2CDG120039R0011 2CDG120040R0011 2CDG120041R0011 2CDG120042R0011 2CDG120043R0011 2CDG120044R0011 2CDG120045R0011 2CDG120046R0011 2CDG120047R0011 2CDG220003R0011 2CDG230013R0011 2CDG230014R0011 2CDG230017R0011 2CDG230023R0011 2CDG230024R0011 2CDG230025R0011 2CDG230026R0011 2CDG230027R0011 2CDG230028R0011 2CDG230029R0011 2CDG230039R0011 2CDG240019R0011 2CDG240020R0011 2CDG250003R0011 2CDG280001R0011 2CDG430051R0011 2CDG430073R0011 2CDG430081R0011 2CDG924003R0011 2CDG924004R0011 2CDL000001R0001 2CL0N222121 2CL0N222123 2CL0N222128 2CL0N222141 2CL0N222143 2CL0N222148 SA/S 2.6.2.1 SA/S 4.6.2.1 SA/S 8.6.2.1 SA/S 12.6.2.1 WZ/S 1.3.1.2 MG/A 4.4.1 AE/S 4.1.1.3 WS/S 4.1.1.2 FC/S 1.1 TS/K 1.1 ST/K 1.1 AA/S 4.1 AAM/S 4.1 TSA/K 230.1 TSA/K 24.1 VA/Z 10.1 VA/Z 50.1 VA/Z 78.1 VA/Z 80.1 VAA/A 6.24.1 WES/A 2.1 ISM/S 5.1 ISS/S 5.1 IPM/S 1.1 CP-D 24/2.5 LGS/A 1.1 FW/S 8.2.1 FAD/A 1.1 FAG/A 1.1 PS/E 2.1 PK/E 2.1 HS/S 4.2.1 LFO/A 1.1 WES/A 3.1 EG/A 32.2.1 L240/MG2 L240/IP L240/PT L240/ENG IR/XB IR/XC EIM/XB EIM/XC IR/KB EIM/KB EIM/KC EIM/D SSM/A SSM/U WRK/W BT/A 1.1 FC600/BREL FC650/O FC650/TMAX PS 1/4/6-KNX PS 1/60/6-KNX PS-END 1-S N2221.2 BL N2221.2 PL N2221.2 AN N2221.4 BL N2221.4 PL N2221.4 AN 40 16779 92506 8 26 40 16779 92509 9 26 40 16779 92513 6 26 40 16779 92515 0 26 40 1677958612 2 26 40 16779 92552 5 26 40 1677992929 5 26 40 1677992937 0 26 40 16779 58383 1 20 40 16779 58381 7 20 40 16779 63022 1 20 40 16779 65886 7 20 40 16779 65887 4 20 40 16779 65299 5 20 40 16779 65300 8 20 40 16779 65319 0 20 40 16779 65320 6 20 40 16779 65321 3 20 40 16779 65322 0 20 40 16779 67064 7 20 40 16779 69736 1 20 40 1677969792 7 20 40 16779 69791 0 20 40 16779 69790 3 20 40 16779 69789 7 20 40 16779 83712 5 20 40 16779 90666 1 20 40 16779 90668 5 20 40 16779 90669 2 20 40 16779 90670 8 20 40 16779 90671 5 20 40 16779 90672 2 20 40 16779 90673 9 20 40 1677992893 9 20 40 16779 94257 7 26 40 16779 65737 2 50 40 16779 66856 9 50 40 16779 66855 2 50 40 16779 66852 1 50 40 16779 67877 3 50 40 16779 67878 0 50 40 16779 67879 7 50 40 16779 67880 3 50 40 16779 75716 4 50 40 16779 75717 1 50 40 16779 75718 8 50 40 16779 87766 4 50 40 16779 83746 0 50 40 16779 83747 7 50 40 16779 66404 2 50 40 16779 92556 3 26 40 16779 70840 1 50 40 16779 86479 4 50 40 16779 86477 0 50 40 16779 66758 6 20 40 16779 66759 3 20 40 16779 66698 5 84 27238 10032 6 84 27238 10034 0 84 27238 10033 3 84 27238 10034 0 84 27238 10045 6 84 27238 10044 9 29 29 29 29 24 143 24 25 51 51 51 30 30 52 52 52 52 52 52 49 25 10 11 11 76 51 54 54 54 54 54 41 41 24 12 146 144 144 144 145 145 145 145 149 150 150 150 147 147 148 143 151 151 151 13 13 13 108 108 108 108 108 108 178 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Order Code Order code Type EAN PG 2CL0N222161 2CL0N222163 2CL0N222168 2CL0N222171 2CL0N222173 2CL0N222178 2CL0N224041 2CL0N224043 2CL0N224048 2CL0N224141 2CL0N224143 2CL0N224148 2CMA100012R1000 2CMA100013R1000 2CMA100014R1000 2CMA100143R1000 2CMA100149R1000 2CMA100150R1000 2CMA100151R1000 2CMA100152R1000 2CMA100154R1000 2CMA100155R1000 2CMA100156R1000 2CMA100163R1000 2CMA100164R1000 2CMA100165R1000 2CMA100166R1000 2CMA100168R1000 2CMA100169R1000 2CMA100170R1000 2CMA100177R1000 2CMA100178R1000 2CMA100179R1000 2CMA100180R1000 2CMA100182R1000 2CMA100183R1000 2CMA100184R1000 2CMA100191R1000 2CMA100192R1000 2CMA100237R1000 2CMA100238R1000 2CMA100240R1000 2CMA100242R1000 2CMA100244R1000 2CMA100245R1000 2CMA100248R1000 2CMA100249R1000 2CMA170500R1000 2CMA170501R1000 2CMA170502R1000 2CMA170503R1000 2CMA170504R1000 2CMA170505R1000 2CMA170506R1000 2CMA170508R1000 2CMA170510R1000 2CMA170511R1000 2CMA170512R1000 2CMA170513R1000 2CMA170514R1000 2CMA170516R1000 2CMA170520R1000 2CMA170521R1000 N2221.6 BL N2221.6 PL N2221.6 AN N2221.7 BL N2221.7 PL N2221.7 AN N2240.4 BL N2240.4 PL N2240.4 AN N2241.4 BL N2241.4 PL N2241.4 AN A43 211 - 100 A44 211 - 100 C11 110 - 100 A43 511 - 100 B21 111 - 100 B21 112 - 100 B21 113 - 100 B21 212 - 100 B21 311 - 100 B21 312 - 100 B21 313 - 100 B23 111 - 100 B23 112 - 100 B23 113 - 100 B23 212 - 100 B23 311 - 100 B23 312 - 100 B23 313 - 100 B24 111 - 100 B24 112 - 100 B24 113 - 100 B24 212 - 100 B24 351 - 100 B24 352 - 100 B24 353 - 100 C13 110 - 100 C13 110 - 300 A41 512 - 100 A42 552 - 100 A41 113 - 100 A42 113 - 100 A43 112 - 100 A43 113 - 100 A44 112 - 100 A44 113 - 100 A41 112 - 100 A41 212 - 100 A41 311 - 100 A41 312 - 100 A41 313 - 100 A41 412 - 100 A41 413 - 100 A41 513 - 100 A42 112 - 100 A42 212 - 100 A42 312 - 100 A42 412 - 100 A42 413 - 100 A42 553 - 100 A43 111 - 100 A43 121 - 100 84 27238 10053 1 84 27238 10055 5 84 27238 10054 8 84 27238 10065 4 84 27238 10055 5 84 27238 10066 1 84 27238 10071 5 84 27238 10073 9 84 27238 10072 2 84 27238 10081 4 84 27238 10083 8 84 27238 10072 2 73 92696 00012 3 73 92696 00013 0 73 92696 00014 7 73 92696 00143 4 73 9269600150 2 73 9269600151 9 73 9269600154 0 73 92696 00152 6 73 9269600155 7 73 9269600156 4 73 9269600163 2 73 9269600164 9 73 9269600165 6 73 9269600168 7 73 92696 00166 3 73 9269600169 4 73 9269600170 0 73 9269600177 9 73 9269600178 6 73 9269600179 3 73 9269600182 3 73 92696 00180 9 73 9269600183 0 73 9269600184 7 73 9269600237 0 73 92696 00191 5 73 92696 00192 2 73 92696 00237 0 73 92696 00238 7 73 9269600240 0 73 92696 00242 4 73 92696 00244 8 73 92696 00245 5 73 92696 00248 6 73 92696 00249 3 73 9269670500 4 73 92696 70501 1 73 92696 70502 8 73 92696 70503 5 73 92696 70504 2 73 92696 70505 9 73 92696 70506 6 73 92696 70508 0 73 92696 70510 3 73 92696 70511 0 73 92696 70512 7 73 92696 70513 4 73 92696 70514 1 73 92696 00244 8 73 92696 70520 2 73 92696 70521 9 Page 109 109 109 109 109 109 110 110 110 110 110 110 123 124 134 123 128 128 128 128 128 128 128 129 129 129 129 129 129 129 130 130 130 130 130 130 130 134 134 121 122 121 122 123 123 124 124 121 121 121 121 121 121 121 121 122 122 122 122 122 122 123 123 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 179 B Selection Table According to Order Code B Order code Type EAN PG Page 2CMA170522R1000 2CMA170523R1000 2CMA170524R1000 2CMA170525R1000 2CMA170526R1000 2CMA170528R1000 2CMA170529R1000 2CMA170531R1000 2CMA170532R1000 2CMA170533R1000 2CMA170534R1000 2CMA170535R1000 2CMA170536R1000 2CMA170537R1000 2CMA170538R1000 2CMA170540R1000 2CMA170541R1000 2CMA170545R1000 2CMA170546R1000 2CMA170550R1000 2CMA170554R1000 2CMA170555R1000 6020-0-1133 6115-0-0183 6115-0-0183 6115-0-0183 6115-0-0183 6115-0-0205 6115-0-0205 6115-0-0206 6115-0-0206 6115-0-0206 6115-0-0207 6115-0-0211 6115-0-0212 6115-0-0213 6115-0-0214 6115-0-0215 6115-0-0216 6115-0-0216 6115-0-0217 6115-0-0217 6115-0-0217 6115-0-0218 6115-0-0219 6115-0-0219 6115-0-0219 6115-0-0219 6115-0-0223 6115-0-0224 6115-0-0225 6115-0-0226 6115-0-0227 6115-0-0444 6115-0-0449 6115-0-0451 6116-0-0174 6116-0-0174 6116-0-0174 6116-0-0174 6116-0-0195 6116-0-0195 6116-0-0196 A43 212 - 100 A43 213 - 100 A43 311 - 100 A43 312 - 100 A43 313 - 100 A43 412 - 100 A43 413 - 100 A43 512 - 100 A43 513 - 100 A44 111 - 100 A44 212 - 100 A44 213 - 100 A44 311 - 100 A44 352 - 100 A44 353 - 100 A44 452 - 100 A44 453 - 100 A44 552 - 100 A44 553 - 100 C11 110 - 300 A41 111 - 100 A42 111 - 100 6010-25-500 6125/01-84-500 6125/01-84-500 6125/01-84-500 6125/01-84-500 6125/01-81-500 6125/01-81-500 6125/01-82-500 6125/01-82-500 6125/01-82-500 6125/01-83-500 6125/01-866-500 6125/01-803-500 6125/01-815-500 6125/01-884-500 6125/01-885-500 6125/02-81-500 6125/02-81-500 6125/02-82-500 6125/02-82-500 6125/02-82-500 6125/02-83-500 6125/02-84-500 6125/02-84-500 6125/02-84-500 6125/02-84-500 6125/02-866-500 6125/02-803-500 6125/02-815-500 6125/02-884-500 6125/02-885-500 6125/98-509 6125/01-896-500 6125/02-896-500 6126/01-84-500 6126/01-84-500 6126/01-84-500 6126/01-84-500 6126/01-81-500 6126/01-81-500 6126/01-82-500 73 92696 70522 6 73 92696 70523 3 73 92696 70524 0 73 92696 70525 7 73 92696 70526 4 73 92696 70528 8 73 92696 70529 5 73 92696 70531 8 73 92696 70532 5 73 92696 70533 2 73 92696 70534 9 73 92696 70535 6 73 92696 70536 3 73 92696 70537 0 73 92696 70538 7 73 92696 70540 0 73 92696 70541 7 73 92696 70545 5 73 92696 70546 2 73 9269670555 4 73 9269670554 7 73 92696 70555 4 40 11395 93850 8 19 40 11395 13559 4 26 40 11395 13559 4 26 40 11395 13559 4 26 40 11395 13559 4 26 40 11395 13947 9 26 40 11395 13947 9 26 40 11395 13948 6 26 40 11395 13948 6 26 40 11395 13948 6 26 40 11395 13949 3 26 40 11395 13953 0 26 40 11395 13954 7 26 40 11395 13955 4 26 40 11395 13956 1 26 40 11395 13957 8 26 40 11395 13958 5 26 40 11395 13958 5 26 40 11395 13959 2 26 40 11395 13959 2 26 40 11395 13959 2 26 40 11395 13961 5 26 40 11395 13962 2 26 40 11395 13962 2 26 40 11395 13962 2 26 40 11395 13962 2 26 40 11395 13966 0 26 40 11395 13967 7 26 40 11395 13968 4 26 40 11395 13969 1 26 40 11395 13971 4 26 40 11395 15782 4 26 40 11395 16988 9 26 40 11395 16991 9 26 40 11395 13574 7 26 40 11395 13574 7 26 40 11395 13574 7 26 40 11395 13574 7 26 40 11395 13985 1 26 40 11395 13985 1 26 40 11395 13986 8 26 123 123 123 123 123 123 123 123 123 124 124 124 124 124 124 124 124 124 124 134 121 122 94 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 108 79 82 79 79 79 79 79 79 79 180 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Order Code Order code Type EAN PG Page 6116-0-0196 6116-0-0196 6116-0-0197 6116-0-0201 6116-0-0202 6116-0-0203 6116-0-0204 6116-0-0205 6116-0-0206 6116-0-0206 6116-0-0207 6116-0-0207 6116-0-0207 6116-0-0208 6116-0-0209 6116-0-0209 6116-0-0209 6116-0-0209 6116-0-0213 6116-0-0214 6116-0-0215 6116-0-0216 6116-0-0217 6116-0-0219 6116-0-0224 6116-0-0226 6117-0-0200 6117-0-0200 6117-0-0200 6117-0-0200 6117-0-0221 6117-0-0221 6117-0-0222 6117-0-0222 6117-0-0222 6117-0-0223 6117-0-0227 6117-0-0228 6117-0-0229 6117-0-0230 6117-0-0231 6117-0-0232 6117-0-0232 6117-0-0233 6117-0-0233 6117-0-0233 6117-0-0234 6117-0-0235 6117-0-0235 6117-0-0235 6117-0-0235 6117-0-0239 6117-0-0240 6117-0-0241 6117-0-0242 6117-0-0243 6117-0-0249 6117-0-0251 6118-0-0105 6118-0-0108 6120-0-0072 6120-0-0073 6120-0-0075 6126/01-82-500 6126/01-82-500 6126/01-83-500 6126/01-866-500 6126/01-803-500 6126/01-815-500 6126/01-884-500 6126/01-885-500 6126/02-81-500 6126/02-81-500 6126/02-82-500 6126/02-82-500 6126/02-82-500 6126/02-83-500 6126/02-84-500 6126/02-84-500 6126/02-84-500 6126/02-84-500 6126/02-866-500 6126/02-803-500 6126/02-815-500 6126/02-884-500 6126/02-885-500 6126/98-509 6126/01-896-500 6126/02-896-500 6127/01-84-500 6127/01-84-500 6127/01-84-500 6127/01-84-500 6127/01-81-500 6127/01-81-500 6127/01-82-500 6127/01-82-500 6127/01-82-500 6127/01-83-500 6127/01-866-500 6127/01-803-500 6127/01-815-500 6127/01-884-500 6127/01-885-500 6127/02-81-500 6127/02-81-500 6127/02-82-500 6127/02-82-500 6127/02-82-500 6127/02-83-500 6127/02-84-500 6127/02-84-500 6127/02-84-500 6127/02-84-500 6127/02-866-500 6127/02-803-500 6127/02-815-500 6127/02-884-500 6127/02-885-500 6127/01-896-500 6127/02-896-500 6129/96-509 6129/98-509 6120/13-500 6120/13-508 6120/12-101-500 40 11395 13986 8 40 11395 13986 8 40 11395 13987 5 40 11395 13993 6 40 11395 13994 3 40 11395 13995 0 40 11395 13996 7 40 11395 13997 4 40 11395 13998 1 40 11395 13998 1 40 11395 13999 8 40 11395 13999 8 40 11395 13999 8 40 11395 14001 7 40 11395 14002 4 40 11395 14002 4 40 11395 14002 4 40 11395 14002 4 40 11395 14006 2 40 11395 14007 9 40 11395 14008 6 40 11395 14009 3 40 11395 14011 6 40 11395 15785 5 40 11395 16993 3 40 11395 16995 7 40 11395 13588 4 40 11395 13588 4 40 11395 13588 4 40 11395 13588 4 40 11395 14024 6 40 11395 14024 6 40 11395 14025 3 40 11395 14025 3 40 11395 14025 3 40 11395 14026 0 40 11395 14030 7 40 11395 14031 4 40 11395 14032 1 40 11395 14033 8 40 11395 14034 5 40 11395 14035 2 40 11395 14035 2 40 11395 14036 9 40 11395 14036 9 40 11395 14036 9 40 11395 14037 6 40 11395 14038 3 40 11395 14038 3 40 11395 14038 3 40 11395 14038 3 40 11395 14043 7 40 11395 14044 4 40 11395 14045 1 40 11395 14046 8 40 11395 14047 5 40 11395 16997 1 40 11395 16999 5 40 11395 15788 6 40 11395 15792 3 40 11395 10227 5 40 11395 11658 6 40 11395 13548 8 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 79 79 79 79 79 79 79 79 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 108 79 82 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 79 82 109 109 72 72 72 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 181 B Selection Table According to Order Code B Order code Type EAN PG Page 6120-0-0076 6123-0-0001 6123-0-0002 6123-0-0003 6123-0-0004 6123-0-0005 6123-0-0006 6132-0-0250 6132-0-0250 6132-0-0250 6132-0-0250 6132-0-0263 6132-0-0263 6132-0-0263 6132-0-0263 6132-0-0272 6132-0-0272 6132-0-0273 6132-0-0273 6132-0-0273 6132-0-0274 6132-0-0278 6132-0-0279 6132-0-0280 6132-0-0281 6132-0-0282 6132-0-0283 6132-0-0283 6132-0-0284 6132-0-0284 6132-0-0284 6132-0-0285 6132-0-0289 6132-0-0290 6132-0-0291 6132-0-0292 6132-0-0293 6132-0-0295 6132-0-0297 6132-0-0299 6132-0-0301 6132-0-0307 6132-0-0313 6132-0-0314 6132-0-0317 6132-0-0318 6132-0-0320 6132-0-0322 6132-0-0324 6132-0-0342 6132-0-0343 6132-0-0344 6132-0-0345 6132-0-0346 6132-0-0347 6132-0-0348 6132-0-0349 6132-0-0350 6132-0-0351 6132-0-0352 6132-0-0353 6132-0-0354 6133-0-0201 6120/12-101-508 6123/20-500 6123/21-500 6123/22-500 6123/23-500 6123/24-500 6123/26-500 6122/01-84-500 6122/01-84-500 6122/01-84-500 6122/01-84-500 6122/02-84-500 6122/02-84-500 6122/02-84-500 6122/02-84-500 6122/01-81-500 6122/01-81-500 6122/01-82-500 6122/01-82-500 6122/01-82-500 6122/01-83-500 6122/01-866-500 6122/01-803-500 6122/01-815-500 6122/01-884-500 6122/01-885-500 6122/02-81-500 6122/02-81-500 6122/02-82-500 6122/02-82-500 6122/02-82-500 6122/02-83-500 6122/02-866-500 6122/02-803-500 6122/02-815-500 6122/02-884-500 6122/02-885-500 6131/10-24-500 6131/10-183-500 6131/11-24-500 6131/11-183-500 6122/98-509 6179/01-204-500 6179/01-208-500 6179/02-204-500 6179/02-208-500 6179-500 6122/01-896-500 6122/02-896-500 6131/20-24-500 6131/20-183-500 6131/21-24-500 6131/21-183-500 6131/30-24-500 6131/30-183-500 6131/31-24-500 6131/31-183-500 6131/40-24-500 6131/29-24-500 6131/29-183-500 6131/39-24-500 6131/39-183-500 6149/21-500 40 11395 14733 7 40 11395 15797 8 40 11395 15798 5 40 11395 15799 2 40 11395 15801 2 40 11395 17645 0 40 11395 17646 7 40 11395 13505 1 40 11395 13505 1 40 11395 13505 1 40 11395 13505 1 40 11395 13521 1 40 11395 13521 1 40 11395 13521 1 40 11395 13521 1 40 11395 14048 2 40 11395 14048 2 40 11395 14049 9 40 11395 14049 9 40 11395 14049 9 40 11395 14051 2 40 11395 14055 0 40 11395 14056 7 40 11395 14057 4 40 11395 14058 1 40 11395 14059 8 40 11395 14060 4 40 11395 14060 4 40 11395 14061 1 40 11395 14061 1 40 11395 14061 1 40 11395 14062 8 40 11395 14066 6 40 11395 14067 3 40 11395 14068 0 40 11395 14069 7 40 11395 14070 3 40 11395 14772 6 40 11395 14774 0 40 11395 14776 4 40 11395 14778 8 40 11395 15795 4 40 11395 16854 7 40 11395 16856 1 40 11395 16861 5 40 11395 16862 2 40 11395 16865 3 40 11395 16982 7 40 11395 16984 1 40 11395 18588 9 40 11395 18589 6 40 11395 18590 2 40 11395 18591 9 40 11395 18592 6 40 11395 18593 3 40 11395 18594 0 40 11395 18596 4 40 11395 18597 1 40 11395 18598 8 40 11395 18599 5 40 11395 18600 8 40 11395 18601 5 40 11395 11896 2 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 72 111 111 111 111 111 111 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 45 45 45 45 110 46 46 46 46 46 84 84 42 42 42 42 43 43 43 43 44 44 44 44 44 76 182 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Order Code Order code Type EAN PG Page 6133-0-0207 6133-0-0209 6133-0-0211 6133-0-0213 6134-0-0248 6134-0-0248 6134-0-0248 6134-0-0248 6134-0-0261 6134-0-0261 6134-0-0261 6134-0-0261 6134-0-0271 6134-0-0274 6134-0-0274 6134-0-0274 6134-0-0275 6134-0-0279 6134-0-0280 6134-0-0281 6134-0-0282 6134-0-0283 6134-0-0284 6134-0-0284 6134-0-0285 6134-0-0285 6134-0-0285 6134-0-0286 6134-0-0290 6134-0-0291 6134-0-0292 6134-0-0293 6134-0-0294 6134-0-0295 6134-0-0295 6134-0-0297 6134-0-0304 6134-0-0306 6135-0-0146 6135-0-0146 6135-0-0146 6135-0-0146 6135-0-0156 6135-0-0156 6135-0-0157 6135-0-0157 6135-0-0157 6135-0-0158 6135-0-0162 6135-0-0163 6135-0-0164 6135-0-0165 6135-0-0166 6135-0-0170 6136-0-0124 6136-0-0139 6136-0-0141 6136-0-0185 6136-0-0186 6136-0-0196 6138-0-0003 6138-0-0005 6151-0-0245 6108/01-500 6108/02-500 6108/04-500 6108/05-500 6124/01-84-500 6124/01-84-500 6124/01-84-500 6124/01-84-500 6128/01-84-500 6128/01-84-500 6128/01-84-500 6128/01-84-500 6108/03-500 6124/01-82-500 6124/01-82-500 6124/01-82-500 6124/01-83-500 6124/01-866-500 6124/01-803-500 6124/01-815-500 6124/01-884-500 6124/01-885-500 6128/01-81-500 6128/01-81-500 6128/01-82-500 6128/01-82-500 6128/01-82-500 6128/01-83-500 6128/01-866-500 6128/01-803-500 6128/01-815-500 6128/01-884-500 6128/01-885-500 6124/01-81-500 6124/01-81-500 6124/98-509 6124/01-896-500 6128/01-896-500 6129/01-84-500 6129/01-84-500 6129/01-84-500 6129/01-84-500 6129/01-81-500 6129/01-81-500 6129/01-82-500 6129/01-82-500 6129/01-82-500 6129/01-83-500 6129/01-866-500 6129/01-803-500 6129/01-815-500 6129/01-884-500 6129/01-885-500 6129/01-896-500 6136/UP 6136/10-500 6136/11-500 6136/100 C-102-500 6136/100 CB-102 6136/15-500 6138/11-84-500 6138/11-83-500 6151/11 U-500 40 11395 13542 6 40 11395 13544 0 40 11395 14403 9 40 11395 14405 3 40 11395 13535 8 40 11395 13535 8 40 11395 13535 8 40 11395 13535 8 40 11395 13602 7 40 11395 13602 7 40 11395 13602 7 40 11395 13602 7 40 11395 13546 4 40 11395 14071 0 40 11395 14071 0 40 11395 14071 0 40 11395 14072 7 40 11395 14076 5 40 11395 14077 2 40 11395 14078 9 40 11395 14079 6 40 11395 14081 9 40 11395 14082 6 40 11395 14082 6 40 11395 14083 3 40 11395 14083 3 40 11395 14083 3 40 11395 14084 0 40 11395 14088 8 40 11395 14089 5 40 11395 14091 8 40 11395 14092 5 40 11395 14093 2 40 11395 14351 3 40 11395 14351 3 40 11395 15778 7 40 11395 16986 5 40 11395 17002 1 40 11395 13616 4 40 11395 13616 4 40 11395 13616 4 40 11395 13616 4 40 11395 14094 9 40 11395 14094 9 40 11395 14095 6 40 11395 14095 6 40 11395 14095 6 40 11395 14096 3 40 11395 14100 7 40 11395 14101 4 40 11395 14102 1 40 11395 14103 8 40 11395 14104 5 40 11395 17004 5 40 11395 04437 7 40 11395 07927 0 40 11395 07929 4 40 11395 10675 4 40 11395 10676 1 40 11395 15694 0 40 11395 11609 8 40 11395 11613 5 40 11395 16395 5 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 97 97 97 97 85 85 85 85 85 85 85 85 98 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 110 85 85 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 59 59 59 59 59 59 50 50 20 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 183 B Selection Table According to Order Code B Order code Type EAN PG Page 6151-0-0247 6151-0-0249 6152-0-0040 6186-0-0023 6197-0-0036 6197-0-0037 6197-0-0038 6197-0-0039 6197-0-0040 6197-0-0041 6310-0-0078 6310-0-0080 6310-0-0081 6310-0-0092 6310-0-0093 6310-0-0094 6310-0-0095 6310-0-0096 6310-0-0097 6310-0-0098 6310-0-0099 6310-0-0106 6310-0-0108 6310-0-0109 6310-0-0114 6310-0-0116 6310-0-0117 6310-0-0122 6310-0-0124 6310-0-0125 6310-0-0130 6310-0-0132 6310-0-0133 6310-0-0135 6310-0-0137 6310-0-0139 6310-0-0144 6310-0-0146 6310-0-0147 6310-0-0152 6310-0-0154 6310-0-0155 6310-0-0157 6310-0-0162 6310-0-0164 6310-0-0165 6310-0-0168 6310-0-0170 6310-0-0172 6310-0-0174 6310-0-0176 6310-0-0178 6310-0-0180 6310-0-0182 6320-0-0002 6320-0-0004 6320-0-0006 6320-0-0008 6320-0-0010 6320-0-0012 6320-0-0014 6320-0-0016 6320-0-0018 6164/11 U-500 6173/11 U-500 6152/11 U-500 6186/01 UP-500 6197/12-101-500 6197/13-101-500 6197/14-101-500 6197/15-101-500 6197/52-101-500 6197/53-101-500 6345-866-101-500 6345-825-101-500 6345-24G-101-500 6351-825-101-500 6353/20-860-500 6353/30-860-500 6353/40-860-500 6353/50-860-500 6354 U-500 6355 U-500 6356 U-500 6340-866-101-500 6340-825-101-500 6340-24G-101-500 6341-866-101-500 6341-825-101-500 6341-24G-101-500 6342-866-101-500 6342-825-101-500 6342-24G-101-500 6344-866-101-500 6344-825-101-500 6344-24G-101-500 6346/10-101-500 6346/11-101-500 6346/12-101-500 6348-866-101-500 6348-825-101-500 6348-24G-101-500 6349-860-101-500 6349-825-101-500 6349-24G-101-500 6350-825-101-500 6352-860-101-500 6352-825-101-500 6352-24G-101-500 6340-811-101-500 6341-811-101-500 6342-811-101-500 6344-811-101-500 6345-811-101-500 6348-811-101-500 6349-811-101-500 6352-811-101-500 6320/10-20-500 6320/10-24G-500 6320/10-79-500 6320/10-83-500 6320/10-260-500 6320/30-20-500 6320/30-24G-500 6320/30-79-500 6320/30-83-500 40 11395 16399 3 40 11395 16402 0 40 11395 16397 9 40 11395 15886 9 40 11395 16366 5 40 11395 16367 2 40 11395 16368 9 40 11395 16369 6 40 11395 16371 9 40 11395 16372 6 40 11395 11868 9 40 11395 11872 6 40 11395 11873 3 40 11395 11891 7 40 11395 11892 4 40 11395 11893 1 40 11395 11894 8 40 11395 11895 5 40 11395 11897 9 40 11395 11898 6 40 11395 11899 3 40 11395 13088 9 40 11395 13091 9 40 11395 13092 6 40 11395 13097 1 40 11395 13099 5 40 11395 13100 8 40 11395 13105 3 40 11395 13107 7 40 11395 13108 4 40 11395 13114 5 40 11395 13116 9 40 11395 13117 6 40 11395 13119 0 40 11395 13122 0 40 11395 13124 4 40 11395 13129 9 40 11395 13131 2 40 11395 13132 9 40 11395 13137 4 40 11395 13140 4 40 11395 13142 8 40 11395 13144 2 40 11395 13149 7 40 11395 13151 0 40 11395 13152 7 40 11395 15674 2 40 11395 15676 6 40 11395 15678 0 40 11395 15681 0 40 11395 15683 4 40 11395 15685 8 40 11395 15687 2 40 11395 15689 6 40 11395 13857 1 40 11395 13873 1 40 11395 13875 5 40 11395 13877 9 40 11395 13879 3 40 11395 13882 3 40 11395 13885 4 40 11395 13887 8 40 11395 13889 2 26 26 26 34 33 33 33 33 33 33 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 26 26 26 26 26 26 26 26 26 20 20 20 58 41 41 41 41 41 41 75 75 75 76 76 76 76 76 72 72 72 73 73 73 74 74 74 74 74 74 74 74 74 73 73 73 75 75 75 75 75 75 75 76 76 76 73 74 74 74 75 75 75 76 92 92 92 92 92 92 92 92 92 184 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Order Code Order code Type EAN PG Page 6320-0-0020 6320-0-0022 6320-0-0024 6320-0-0026 6320-0-0028 6320-0-0030 6320-0-0032 6320-0-0034 6320-0-0036 6320-0-0038 6320-0-0040 6320-0-0042 6320-0-0044 6320-0-0046 6320-0-0048 6320-0-0050 6401-0-0055 6590-0-0188 6599-0-1193 6599-0-1466 6599-0-1524 6599-0-1557 6599-0-2076 6599-0-2142 6599-0-2332 6599-0-2795 6599-0-2832 6599-0-2832 6599-0-2832 6599-0-2835 6599-0-2835 6599-0-2835 6599-0-2835 6599-0-2853 6599-0-2856 6599-0-2882 6599-0-2882 6599-0-2885 6599-0-2918 6599-0-2919 6599-0-2924 6599-0-2933 6599-0-2936 6599-0-2940 6599-0-2962 6599-0-2967 6599-0-2971 6599-0-2975 6599-0-2998 6599-0-3008 6700-0-0023 6700-0-0024 6700-0-0025 6700-0-0035 6700-0-0036 6700-0-0037 6700-0-0038 6700-0-0040 6700-0-0042 6720-0-0001 6720-0-0002 6720-0-0003 6720-0-0004 6320/30-260-500 6320/38-20-500 6320/38-24G-500 6320/38-79-500 6320/38-83-500 6320/38-260-500 6320/50-20-500 6320/50-24G-500 6320/50-79-500 6320/50-83-500 6320/50-260-500 6320/58-20-500 6320/58-24G-500 6320/58-79-500 6320/58-83-500 6320/58-260-500 6404 U 6595 U 2114-212 6541-20 6541-21 6541-24 6541-74 6541-79 6541-24G 6541-22G 6541-82 6541-82 6541-82 6541-84 6541-84 6541-84 6541-84 6541-260 6541-266 6541-81 6541-81 6541-83 6541-72 6541-783 6541-866 6541-777 6541-815 6541-803 6541-884 6541-885 6541-774 6541-775 6541-896 2114-214-500 6702-500 6703-500 6704-500 6747 AGM-204-500 6747 AGM-208-500 6747 AGM-35-500 6747 AGM-201-500 6701-101-500 6705-101-500 6720-64 6720-65 6720-66 6721-64 40 11395 13892 2 40 11395 13895 3 40 11395 13897 7 40 11395 13900 4 40 11395 13902 8 40 11395 13904 2 40 11395 13911 0 40 11395 13914 1 40 11395 13916 5 40 11395 13918 9 40 11395 13921 9 40 11395 13923 3 40 11395 13926 4 40 11395 13928 8 40 11395 13931 8 40 11395 13933 2 40 11395 09383 2 40 11395 09385 6 40 11395 37870 0 40 11395 38100 7 40 11395 38150 2 40 11395 38180 9 40 11395 54180 7 40 11395 55810 2 40 11395 70860 6 40 11395 91730 5 40 11395 99569 3 40 11395 99569 3 40 11395 99569 3 40 11395 99663 8 40 11395 99663 8 40 11395 99663 8 40 11395 99663 8 40 11395 00548 4 40 11395 00634 4 40 11395 05642 4 40 11395 05642 4 40 11395 07445 9 40 11395 08281 2 40 11395 08346 8 40 11395 08815 9 40 11395 10754 6 40 11395 11111 6 40 11395 11115 4 40 11395 12964 7 40 11395 12965 4 40 11395 12956 2 40 11395 13692 8 40 11395 16703 8 40 11395 17517 0 40 11395 13434 4 40 11395 13436 8 40 11395 13437 5 40 11395 17588 0 40 11395 17589 7 40 11395 17590 3 40 11395 17591 0 40 11395 18264 2 40 11395 18266 6 40 11395 09372 6 40 11395 09381 8 40 11395 09382 5 40 11395 11211 3 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 14 14 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 16 16 16 29 29 29 29 16 16 16 16 16 16 92 93 93 93 93 93 93 93 93 93 93 94 94 94 94 94 164 164 99 99 99 99 99 99 99 99 98 98 98 98 98 98 98 99 99 98 98 98 99 99 98 99 98 98 98 98 99 99 98 99 160 160 161 159 159 159 159 160 161 165 165 165 165 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 185 B Selection Table According to Order Code B Order code Type EAN PG Page 6720-0-0005 6720-0-0008 6730-0-0001 6730-0-0002 6730-0-0005 6730-0-0006 6730-0-0007 6730-0-0008 6730-0-0009 6730-0-0010 6730-0-0011 6730-0-0014 6730-0-0014 6730-0-0015 6730-0-0015 6730-0-0015 6730-0-0016 6730-0-0017 6730-0-0017 6730-0-0017 6730-0-0017 6730-0-0023 6730-0-0024 6730-0-0025 6730-0-0026 6730-0-0027 6730-0-0028 6730-0-0029 6730-0-0030 6730-0-0031 6730-0-0032 6730-0-0033 6730-0-0034 6730-0-0035 6730-0-0036 6730-0-0037 6730-0-0038 6730-0-0039 6730-0-0040 6730-0-0041 6730-0-0042 6730-0-0043 6730-0-0066 6770-0-0002 6770-0-0002 6780-0-0001 6800-0-2514 6800-0-2515 6800-0-2516 6800-0-2720 6800-0-2721 6800-0-2723 6899-0-0282 6899-0-0297 8100-0-0344 8100-0-0346 8110-0-0001 8110-0-0002 8110-0-0003 8110-0-0004 8110-0-0017 8110-0-0018 8110-0-0019 6721-65 6725-500 6730-212 6730-214 6730-260 6730-266 6730-20 6730-21 6730-22G 6730-24 6730-24G 6730-81 6730-81 6730-82 6730-82 6730-82 6730-83 6730-84 6730-84 6730-84 6730-84 6730-866 6730-815 6730-803 6730-884 6730-885 6731-212-500 6732-212-500 6731-214-500 6732-214-500 6731-82-500 6732-82-500 6733-82-500 6731-83-500 6732-83-500 6733-83-500 6731-84-500 6732-84-500 6733-84-500 6731-866-500 6732-866-500 6733-866-500 6730-896-500 6770-500 6770-500 6780-500 6828 6829-84 6824-84 6833-84-500 6833/01-84-500 6835/01-84-500 6885-500 6885-183-500 8186/03-500 8186/04-500 DGT-0-1K-AB DGT-1-1K-AB DGT-2-1K-AB DGT-3-1K-AB DGT-MBU-AB DGT-OPC-AB DGT-PWR-AB 40 11395 11212 0 16 40 11395 18271 0 16 40 11395 09336 8 16 40 11395 09337 5 16 40 11395 09351 1 16 40 11395 09352 8 16 40 11395 09353 5 16 40 11395 09354 2 16 40 11395 09355 9 16 40 11395 09356 6 16 40 11395 09357 3 16 40 11395 09361 0 16 40 11395 09361 0 16 40 11395 09362 7 16 40 11395 09362 7 16 40 11395 09362 7 16 40 11395 09363 4 16 40 11395 09364 1 16 40 11395 09364 1 16 40 11395 09364 1 16 40 11395 09364 1 16 40 11395 09371 9 16 40 11395 11119 2 16 40 11395 11120 8 16 40 11395 13035 3 16 40 11395 13036 0 16 40 11395 13404 7 16 40 11395 13405 4 16 40 11395 13406 1 16 40 11395 13407 8 16 40 11395 13408 5 16 40 11395 13409 2 16 40 11395 13421 4 16 40 11395 13422 1 16 40 11395 13423 8 16 40 11395 13424 5 16 40 11395 13425 2 16 40 11395 13427 6 16 40 11395 13428 3 16 40 11395 13429 0 16 40 11395 13431 3 16 40 11395 13432 0 16 40 11395 16710 6 16 40 11395 11896 2 26 40 11395 11896 2 26 40 11395 13433 7 16 40 11395 13745 1 14 40 11395 13746 8 14 40 11395 13747 5 14 40 11395 18696 1 14 40 11395 18697 8 14 40 11395 18699 2 14 40 11395 00468 5 29 40 11395 06826 7 40 11395 17146 2 32 40 11395 17148 6 32 40 11395 19371 6 37 40 11395 19372 3 37 40 11395 19373 0 37 40 11395 19374 7 37 40 11395 19387 7 37 40 11395 19389 1 37 40 11395 19391 4 37 165 158 162 162 162 162 162 162 162 162 162 163 163 163 163 163 163 163 163 163 163 163 163 163 163 163 156 156 156 156 156 157 157 156 157 157 156 157 157 156 157 157 163 12 161 158 153 153 153 153 153 153 45 45 11 11 170 170 170 170 171 171 171 186 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Order Code Order code Type EAN PG Page 8110-0-0020 8110-0-0022 8110-0-0023 8110-0-0030 8110-0-0036 8136-0-0024 8136-0-0026 8136-0-0028 8136-0-0030 8136-0-0032 GHQ3050008R0001 GHQ3050017R0001 GHQ3050018R0001 GHQ3050023R0001 GHQ3050024R0001 GHQ3050027R0001 GHQ3050031R0001 GHQ3201972R0001 GHQ3201972R0002 GHQ3201972R0011 GHQ3201972R0012 GHQ3201973R0021 GHQ3280011R0001 GHQ3280013R0001 GHQ3280014R0001 GHQ3280015R0001 GHQ3280220R0001 GHQ4001906R0001 GHQ4030001R0004 GHQ4030001R0012 GHQ6050053R0001 GHQ6050056R0002 GHQ6050057R0002 GHQ6050059R0005 GHQ6050059R0006 GHQ6050059R0011 GHQ6050059R0012 GHQ6050059R0014 GHQ6301901R0001 GHQ6301902R0001 GHQ6301908R0001 GHQ6301908R0002 GHQ6301908R0003 GHQ6301908R0004 GHQ6301910R0001 GHQ6301910R0011 GHQ6310009R0001 GHQ6310044R0111 GHQ6310049R0111 GHQ6310062R0111 GHQ6310070R0111 GHQ6310070R0111 GHQ6310074R0111 GHQ6310074R0111 GHQ6310080R0111 GHQ6310084R0111 GHQ6310085R0111 GHQ7132443R0003 GHQ7132443R0004 GHQ7132443R0011 GHQ7132443R0021 GHV9020012V0021 GHV9210018V0020 DGT-DIN-AB DGT-OBI-AB DGT-MNG-100-AB DGT-VIS-1K-AB DGT-LIZ-100-AB 8136/09-811-500 8136/09-825-500 8136/12-811-500 8136/12-825-500 8136/01 UP-500 SGL SSF/G SSF/GB WEL/A, ES WELT/A, ES SCS L240/BS MRS/W MRS/B VMRS/W VMRS/B RTK L840/MG4 SAD/GUP SAD/ED SAD/GAP L208/V.24 LKS SWM 4 SWM4/RN LL/S 1.1 NT/S 12.1600 NT/S 24.800 MT 701.2, WS MT 701.2, SR T-RAHM, WS T-RAHM, SR UP-KAST 2 BUSKLEMME KLEMME VB/K 200.1 VB/K 270.1 VB/K 100.1 VB/K 360.1 KS/K 4.1 KS/K 2.1 US/E 1 ER/U 1.1 SU/S 30.640.1 AM/S 12.1 US/U 4.2 US/U 4.2 US/U 2.2 US/U 2.2 LM/S 1.1 JSB/S 1.1 SMB/S 1.1 EP NDA/W ND/W NDU/W FPA03 ADB 40 11395 19392 1 40 11395 19394 5 40 11395 19395 2 40 11395 19404 1 40 11395 19411 9 40 11395 15877 7 40 11395 15879 1 40 11395 15882 1 40 11395 15884 5 40 11395 15891 3 40 16779 53313 3 40 16779 53466 6 40 16779 53467 3 40 16779 58570 5 40 16779 58571 2 40 16779 58575 0 40 16779 58561 3 40 16779 50660 1 40 16779 50659 5 40 16779 50658 8 40 16779 50657 1 40 16779 50655 7 40 13232 73240 9 40 13232 73260 7 40 13232 73270 6 40 13232 73280 5 40 16779 44510 8 40 13232 39280 1 40 13232 05740 3 40 13232 05750 2 40 16779 39210 5 40 16779 51467 5 40 16779 51468 2 40 16779 57581 2 40 16779 57582 9 40 16779 49585 1 40 16779 49586 8 40 16779 51396 8 40 12233 80230 2 40 16779 07930 3 40 16779 46980 7 40 16779 46990 6 40 16779 50103 3 40 16779 84676 9 40 16779 51725 6 40 16779 52893 1 40 16779 00570 8 40 16779 49725 1 40 16779 51477 4 40 16779 51481 1 40 16779 56481 6 40 16779 56481 6 40 16779 56483 0 40 16779 56483 0 40 16779 58121 9 40 16779 57993 3 40 16779 58092 2 40 13232 04220 1 40 13232 61690 7 40 13232 02540 2 40 13232 02550 1 40 16779 53444 4 40 13232 53420 1 37 37 37 37 37 34 34 34 34 34 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 26 26 26 26 26 26 26 26 26 26 50 50 50 50 50 50 171 171 170 170 171 58 58 58 58 59 150 152 152 146 146 146 147 148 148 148 148 148 146 147 147 147 144 148 150 151 12 9 9 55 55 55 55 55 13 13 13 13 13 13 8 8 13 49 7 7 23 49 23 49 53 35 137 149 149 149 149 152 149 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 187 B Selection Table According to Order Code B Order code Type EAN PG Page GHV9210018V0021 GHV9210018V0022 GHV9220004V0004 GHV9220004V0009 GHV9220004V0010 GHV9230039V0020 GHV9230039V0020 GHV9240001V0011 GHV9240001V0011 GHV9240001V0012 GHV9240001V0013 GHV9240001V0013 GHV9250010V0001 GHV9250010V0002 GHV9250010V0003 GHV9250010V0004 GHV9270001V0001 GHV9270013V0100 ADB1 VSUE GP2 SPGS/W SPGS/B MW MW SAK7 SAK7 SAK12 SAK17 SAK17 ESPE EVSB AMSE AMSP SSS RL 40 13232 58440 4 40 13232 70120 7 40 13232 66670 4 40 13232 61420 0 40 13232 61430 9 40 13232 66580 6 40 13232 66580 6 40 13232 74493 8 40 13232 74493 8 40 13232 74494 5 40 13232 74495 2 40 13232 74495 2 40 13232 70140 5 40 16779 44170 4 40 16779 49290 4 40 16779 49280 5 40 13232 02320 0 40 16779 86476 3 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 149 149 148 148 148 145 150 8 145 8 8 145 147 147 147 147 152 152 188 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Type Type Order code EAN PG 1721-181K 1721-182K-500 1721-183K-500 1721-184K-500 1721-280 1721-281 1721-283 1721-284 1721-285 1721-286 1721-287 1721-288 1721-291-500 1721-295-500 1721-296-500 1721-297-500 1721-299-500 1721-80-500 1721-80G-500 1721-811 1721-821 1721-823-101 1721-825 1721-826-101 1721-84-500 1721-860 1721-866K-500 1721-884K-500 1721-885K-500 1722-181K 1722-182K 1722-183K-500 1722-184K-500 1722-280 1722-281 1722-283 1722-284 1722-285 1722-286 1722-287 1722-288 1722-291-500 1722-295-500 1722-296-500 1722-297-500 1722-299-500 1722-80-500 1722-80G 1722-811 1722-821 1722-823-101 1722-825 1722-825 1722-826-101 1722-84-500 1722-860 1722-866K-500 1722-884K 1722-885K-500 1723-181K 1723-182K 1723-183K-500 1723-184K-500 1754-0-4240 1754-0-4506 1754-0-4529 1754-0-4498 1754-0-4437 1754-0-4409 1754-0-4543 1754-0-4331 1754-0-4334 1754-0-4337 1754-0-4340 1754-0-4343 1754-0-4471 1754-0-4491 1754-0-4486 1754-0-4476 1754-0-4481 1754-0-4535 1754-0-4538 1754-0-4442 1754-0-4258 1754-0-4356 1754-0-4322 1754-0-4360 1754-0-4536 1754-0-4254 1754-0-4500 1754-0-4531 1754-0-4532 1754-0-4241 1754-0-4231 1754-0-4530 1754-0-4499 1754-0-4438 1754-0-4410 1754-0-4544 1754-0-4332 1754-0-4335 1754-0-4338 1754-0-4341 1754-0-4344 1754-0-4472 1754-0-4492 1754-0-4487 1754-0-4477 1754-0-4482 1754-0-4537 1754-0-4327 1754-0-4443 1754-0-4259 1754-0-4357 1754-0-4323 1754-0-4323 1754-0-4361 1754-0-4539 1754-0-4255 1754-0-4501 1754-0-4415 1754-0-4534 1754-0-4242 1754-0-4232 1754-0-4533 1754-0-4502 40 11395 05080 4 40 11395 17460 9 40 11395 17594 1 40 11395 17452 4 40 11395 15695 7 40 11395 12636 3 40 11395 18556 8 40 11395 11324 0 40 11395 11327 1 40 11395 11331 8 40 11395 11334 9 40 11395 11337 0 40 11395 16507 2 40 11395 16509 6 40 11395 16512 6 40 11395 16515 7 40 11395 16517 1 40 11395 17611 5 40 11395 17615 3 40 11395 15701 5 40 11395 05687 5 40 11395 11522 0 40 11395 08891 3 40 11395 11526 8 40 11395 17612 2 40 11395 05679 0 40 11395 17454 8 40 11395 17596 5 40 11395 17597 2 40 11395 05081 1 40 11395 05070 5 40 11395 17595 8 40 11395 17453 1 40 11395 15696 4 40 11395 12637 0 40 11395 18557 5 40 11395 11325 7 40 11395 11328 8 40 11395 11332 5 40 11395 11335 6 40 11395 11338 7 40 11395 16519 5 40 11395 16522 5 40 11395 16524 9 40 11395 16526 3 40 11395 16528 7 40 11395 17613 9 40 11395 11306 6 40 11395 15702 2 40 11395 05689 9 40 11395 11523 7 40 11395 08892 0 40 11395 08892 0 40 11395 11527 5 40 11395 17616 0 40 11395 05681 3 40 11395 17455 5 40 11395 12825 1 40 11395 17600 9 40 11395 05082 8 40 11395 05071 2 40 11395 17599 6 40 11395 17456 2 4 1 4 1 4 4 4 1 4 4 4 4 4 4 1 4 4 4 4 4 4 4 4 4 1 4 4 1 4 4 1 4 1 4 4 4 1 4 4 4 4 4 4 1 4 4 4 4 4 4 4 4 4 4 1 4 4 1 4 4 1 4 1 Page 86 86 86 86 88 88 88 88 88 88 88 88 88 88 88 88 88 87 87 87 87 87 87 87 87 87 88 86 86 86 86 86 86 88 88 88 88 88 88 88 88 88 88 88 88 88 87 87 87 87 87 87 87 87 87 87 88 86 86 86 86 86 86 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 189 B Selection Table According to Type B Type Order code EAN PG 1723-280 1723-281 1723-283 1723-284 1723-285 1723-286 1723-287 1723-288 1723-291-500 1723-295-500 1723-296-500 1723-297-500 1723-299-500 1723-80-500 1723-80G 1723-811 1723-821 1723-823-101 1723-826-101 1723-84-500 1723-860 1723-866K 1723-884K 1723-885K 1724-181K 1724-182K 1724-183K 1724-184K 1724-280 1724-281 1724-283 1724-284 1724-285 1724-286 1724-287 1724-288 1724-291-500 1724-295-500 1724-296-500 1724-297-500 1724-299-500 1724-80 1724-80G 1724-811 1724-821 1724-823-101 1724-825 1724-826-101 1724-84 1724-860 1724-866K 1724-884K 1724-885K 1725-181K 1725-182K 1725-183K 1725-184K-500 1725-280 1725-281 1725-283 1725-284 1725-285 1725-286 1754-0-4439 1754-0-4411 1754-0-4545 1754-0-4333 1754-0-4336 1754-0-4339 1754-0-4342 1754-0-4345 1754-0-4473 1754-0-4493 1754-0-4488 1754-0-4478 1754-0-4483 1754-0-4540 1754-0-4328 1754-0-4444 1754-0-4260 1754-0-4358 1754-0-4362 1754-0-4541 1754-0-4256 1754-0-4319 1754-0-4416 1754-0-4421 1754-0-4243 1754-0-4233 1754-0-4309 1754-0-4238 1754-0-4440 1754-0-4412 1754-0-4546 1754-0-4346 1754-0-4348 1754-0-4350 1754-0-4352 1754-0-4354 1754-0-4474 1754-0-4494 1754-0-4489 1754-0-4479 1754-0-4484 1754-0-4107 1754-0-4329 1754-0-4445 1754-0-4261 1754-0-4359 1754-0-4325 1754-0-4363 1754-0-4112 1754-0-4257 1754-0-4320 1754-0-4417 1754-0-4422 1754-0-4244 1754-0-4234 1754-0-4310 1754-0-4517 1754-0-4441 1754-0-4413 1754-0-4547 1754-0-4347 1754-0-4349 1754-0-4351 40 11395 15697 1 40 11395 12638 7 40 11395 18558 2 40 11395 11326 4 40 11395 11329 5 40 11395 11333 2 40 11395 11336 3 40 11395 11339 4 40 11395 16531 7 40 11395 16533 1 40 11395 16535 5 40 11395 16537 9 40 11395 16539 3 40 11395 17617 7 40 11395 11307 3 40 11395 15703 9 40 11395 05691 2 40 11395 11524 4 40 11395 11528 2 40 11395 17623 8 40 11395 05683 7 40 11395 08837 1 40 11395 12826 8 40 11395 12832 9 40 11395 05083 5 40 11395 05073 6 40 11395 07483 1 40 11395 05078 1 40 11395 15698 8 40 11395 12639 4 40 11395 18559 9 40 11395 11341 7 40 11395 11343 1 40 11395 11345 5 40 11395 11347 9 40 11395 11349 3 40 11395 16542 3 40 11395 16544 7 40 11395 16546 1 40 11395 16548 5 40 11395 16551 5 40 11395 99488 7 40 11395 11308 0 40 11395 15704 6 40 11395 05693 6 40 11395 11525 1 40 11395 08894 4 40 11395 11529 9 40 11395 99617 1 40 11395 05685 1 40 11395 08839 5 40 11395 12827 5 40 11395 12833 6 40 11395 05084 2 40 11395 05074 3 40 11395 07484 8 40 11395 17472 2 40 11395 15699 5 40 11395 12661 5 40 11395 18561 2 40 11395 11342 4 40 11395 11344 8 40 11395 11346 2 4 4 4 1 4 4 4 4 4 4 1 4 4 4 4 4 4 4 4 1 4 4 1 4 4 1 4 1 4 4 4 1 4 4 4 4 4 4 1 4 4 4 4 4 4 4 4 4 1 4 4 1 4 4 1 4 1 4 4 4 1 4 4 190 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Page 89 89 89 89 89 89 89 89 89 89 89 89 89 87 87 87 87 87 87 87 87 88 86 86 86 86 86 86 89 89 89 89 89 89 89 89 89 89 89 89 89 87 87 87 87 87 87 87 87 87 88 86 86 86 86 86 86 89 89 89 89 89 89 Selection Table According to Type Type Order code EAN PG Page 1725-287 1725-288 1725-291-500 1725-295-500 1725-296-500 1725-297-500 1725-299-500 1725-80 1725-80G 1725-84 1725-866K 1725-884K 1725-885K 2114-212 2114-214-500 6010-25-500 6108/01-500 6108/02-500 6108/03-500 6108/04-500 6108/05-500 6120/12-101-500 6120/12-101-508 6120/13-500 6120/13-508 6122/01-803-500 6122/01-81-500 6122/01-81-500 6122/01-815-500 6122/01-82-500 6122/01-82-500 6122/01-82-500 6122/01-83-500 6122/01-84-500 6122/01-84-500 6122/01-84-500 6122/01-84-500 6122/01-866-500 6122/01-884-500 6122/01-885-500 6122/01-896-500 6122/02-803-500 6122/02-81-500 6122/02-81-500 6122/02-815-500 6122/02-82-500 6122/02-82-500 6122/02-82-500 6122/02-83-500 6122/02-84-500 6122/02-84-500 6122/02-84-500 6122/02-84-500 6122/02-866-500 6122/02-884-500 6122/02-885-500 6122/02-896-500 6122/98-509 6123/20-500 6123/21-500 6123/22-500 6123/23-500 6123/24-500 1754-0-4353 1754-0-4355 1754-0-4475 1754-0-4495 1754-0-4490 1754-0-4480 1754-0-4485 1754-0-4108 1754-0-4330 1754-0-4113 1754-0-4321 1754-0-4418 1754-0-4423 6599-0-1193 6599-0-3008 6020-0-1133 6133-0-0207 6133-0-0209 6134-0-0271 6133-0-0211 6133-0-0213 6120-0-0075 6120-0-0076 6120-0-0072 6120-0-0073 6132-0-0279 6132-0-0272 6132-0-0272 6132-0-0280 6132-0-0273 6132-0-0273 6132-0-0273 6132-0-0274 6132-0-0250 6132-0-0250 6132-0-0250 6132-0-0250 6132-0-0278 6132-0-0281 6132-0-0282 6132-0-0322 6132-0-0290 6132-0-0283 6132-0-0283 6132-0-0291 6132-0-0284 6132-0-0284 6132-0-0284 6132-0-0285 6132-0-0263 6132-0-0263 6132-0-0263 6132-0-0263 6132-0-0289 6132-0-0292 6132-0-0293 6132-0-0324 6132-0-0307 6123-0-0001 6123-0-0002 6123-0-0003 6123-0-0004 6123-0-0005 40 11395 11348 6 40 11395 11351 6 40 11395 16553 9 40 11395 16555 3 40 11395 16557 7 40 11395 16559 1 40 11395 16562 1 40 11395 99492 4 40 11395 11309 7 40 11395 99619 5 40 11395 08842 5 40 11395 12828 2 40 11395 12834 3 40 11395 37870 0 40 11395 17517 0 40 11395 93850 8 40 11395 13542 6 40 11395 13544 0 40 11395 13546 4 40 11395 14403 9 40 11395 14405 3 40 11395 13548 8 40 11395 14733 7 40 11395 10227 5 40 11395 11658 6 40 11395 14056 7 40 11395 14048 2 40 11395 14048 2 40 11395 14057 4 40 11395 14049 9 40 11395 14049 9 40 11395 14049 9 40 11395 14051 2 40 11395 13505 1 40 11395 13505 1 40 11395 13505 1 40 11395 13505 1 40 11395 14055 0 40 11395 14058 1 40 11395 14059 8 40 11395 16982 7 40 11395 14067 3 40 11395 14060 4 40 11395 14060 4 40 11395 14068 0 40 11395 14061 1 40 11395 14061 1 40 11395 14061 1 40 11395 14062 8 40 11395 13521 1 40 11395 13521 1 40 11395 13521 1 40 11395 13521 1 40 11395 14066 6 40 11395 14069 7 40 11395 14070 3 40 11395 16984 1 40 11395 15795 4 40 11395 15797 8 40 11395 15798 5 40 11395 15799 2 40 11395 15801 2 40 11395 17645 0 4 4 4 4 1 4 4 4 4 1 4 1 4 19 19 19 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 89 89 89 89 89 89 89 87 87 87 88 86 86 99 99 94 97 97 98 97 97 72 72 72 72 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 110 111 111 111 111 111 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 191 B Selection Table According to Type B Type Order code EAN PG Page 6123/26-500 6124/01-803-500 6124/01-81-500 6124/01-81-500 6124/01-815-500 6124/01-82-500 6124/01-82-500 6124/01-82-500 6124/01-83-500 6124/01-84-500 6124/01-84-500 6124/01-84-500 6124/01-84-500 6124/01-866-500 6124/01-884-500 6124/01-885-500 6124/01-896-500 6124/98-509 6125/01-803-500 6125/01-81-500 6125/01-81-500 6125/01-815-500 6125/01-82-500 6125/01-82-500 6125/01-82-500 6125/01-83-500 6125/01-84-500 6125/01-84-500 6125/01-84-500 6125/01-84-500 6125/01-866-500 6125/01-884-500 6125/01-885-500 6125/01-896-500 6125/02-803-500 6125/02-81-500 6125/02-81-500 6125/02-815-500 6125/02-82-500 6125/02-82-500 6125/02-82-500 6125/02-83-500 6125/02-84-500 6125/02-84-500 6125/02-84-500 6125/02-84-500 6125/02-866-500 6125/02-884-500 6125/02-885-500 6125/02-896-500 6125/98-509 6126/01-803-500 6126/01-81-500 6126/01-81-500 6126/01-815-500 6126/01-82-500 6126/01-82-500 6126/01-82-500 6126/01-83-500 6126/01-84-500 6126/01-84-500 6126/01-84-500 6126/01-84-500 6123-0-0006 6134-0-0280 6134-0-0295 6134-0-0295 6134-0-0281 6134-0-0274 6134-0-0274 6134-0-0274 6134-0-0275 6134-0-0248 6134-0-0248 6134-0-0248 6134-0-0248 6134-0-0279 6134-0-0282 6134-0-0283 6134-0-0304 6134-0-0297 6115-0-0212 6115-0-0205 6115-0-0205 6115-0-0213 6115-0-0206 6115-0-0206 6115-0-0206 6115-0-0207 6115-0-0183 6115-0-0183 6115-0-0183 6115-0-0183 6115-0-0211 6115-0-0214 6115-0-0215 6115-0-0449 6115-0-0224 6115-0-0216 6115-0-0216 6115-0-0225 6115-0-0217 6115-0-0217 6115-0-0217 6115-0-0218 6115-0-0219 6115-0-0219 6115-0-0219 6115-0-0219 6115-0-0223 6115-0-0226 6115-0-0227 6115-0-0451 6115-0-0444 6116-0-0202 6116-0-0195 6116-0-0195 6116-0-0203 6116-0-0196 6116-0-0196 6116-0-0196 6116-0-0197 6116-0-0174 6116-0-0174 6116-0-0174 6116-0-0174 40 11395 17646 7 40 11395 14077 2 40 11395 14351 3 40 11395 14351 3 40 11395 14078 9 40 11395 14071 0 40 11395 14071 0 40 11395 14071 0 40 11395 14072 7 40 11395 13535 8 40 11395 13535 8 40 11395 13535 8 40 11395 13535 8 40 11395 14076 5 40 11395 14079 6 40 11395 14081 9 40 11395 16986 5 40 11395 15778 7 40 11395 13954 7 40 11395 13947 9 40 11395 13947 9 40 11395 13955 4 40 11395 13948 6 40 11395 13948 6 40 11395 13948 6 40 11395 13949 3 40 11395 13559 4 40 11395 13559 4 40 11395 13559 4 40 11395 13559 4 40 11395 13953 0 40 11395 13956 1 40 11395 13957 8 40 11395 16988 9 40 11395 13967 7 40 11395 13958 5 40 11395 13958 5 40 11395 13968 4 40 11395 13959 2 40 11395 13959 2 40 11395 13959 2 40 11395 13961 5 40 11395 13962 2 40 11395 13962 2 40 11395 13962 2 40 11395 13962 2 40 11395 13966 0 40 11395 13969 1 40 11395 13971 4 40 11395 16991 9 40 11395 15782 4 40 11395 13994 3 40 11395 13985 1 40 11395 13985 1 40 11395 13995 0 40 11395 13986 8 40 11395 13986 8 40 11395 13986 8 40 11395 13987 5 40 11395 13574 7 40 11395 13574 7 40 11395 13574 7 40 11395 13574 7 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 111 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 110 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 108 79 79 79 79 79 79 79 79 79 79 79 79 192 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Type Type Order code EAN PG Page 6126/01-866-500 6126/01-884-500 6126/01-885-500 6126/01-896-500 6126/02-803-500 6126/02-81-500 6126/02-81-500 6126/02-815-500 6126/02-82-500 6126/02-82-500 6126/02-82-500 6126/02-83-500 6126/02-84-500 6126/02-84-500 6126/02-84-500 6126/02-84-500 6126/02-866-500 6126/02-884-500 6126/02-885-500 6126/02-896-500 6126/98-509 6127/01-803-500 6127/01-81-500 6127/01-81-500 6127/01-815-500 6127/01-82-500 6127/01-82-500 6127/01-82-500 6127/01-83-500 6127/01-84-500 6127/01-84-500 6127/01-84-500 6127/01-84-500 6127/01-866-500 6127/01-884-500 6127/01-885-500 6127/01-896-500 6127/02-803-500 6127/02-81-500 6127/02-81-500 6127/02-815-500 6127/02-82-500 6127/02-82-500 6127/02-82-500 6127/02-83-500 6127/02-84-500 6127/02-84-500 6127/02-84-500 6127/02-84-500 6127/02-866-500 6127/02-884-500 6127/02-885-500 6127/02-896-500 6128/01-803-500 6128/01-81-500 6128/01-81-500 6128/01-815-500 6128/01-82-500 6128/01-82-500 6128/01-82-500 6128/01-83-500 6128/01-84-500 6128/01-84-500 6116-0-0201 6116-0-0204 6116-0-0205 6116-0-0224 6116-0-0214 6116-0-0206 6116-0-0206 6116-0-0215 6116-0-0207 6116-0-0207 6116-0-0207 6116-0-0208 6116-0-0209 6116-0-0209 6116-0-0209 6116-0-0209 6116-0-0213 6116-0-0216 6116-0-0217 6116-0-0226 6116-0-0219 6117-0-0228 6117-0-0221 6117-0-0221 6117-0-0229 6117-0-0222 6117-0-0222 6117-0-0222 6117-0-0223 6117-0-0200 6117-0-0200 6117-0-0200 6117-0-0200 6117-0-0227 6117-0-0230 6117-0-0231 6117-0-0249 6117-0-0240 6117-0-0232 6117-0-0232 6117-0-0241 6117-0-0233 6117-0-0233 6117-0-0233 6117-0-0234 6117-0-0235 6117-0-0235 6117-0-0235 6117-0-0235 6117-0-0239 6117-0-0242 6117-0-0243 6117-0-0251 6134-0-0291 6134-0-0284 6134-0-0284 6134-0-0292 6134-0-0285 6134-0-0285 6134-0-0285 6134-0-0286 6134-0-0261 6134-0-0261 40 11395 13993 6 40 11395 13996 7 40 11395 13997 4 40 11395 16993 3 40 11395 14007 9 40 11395 13998 1 40 11395 13998 1 40 11395 14008 6 40 11395 13999 8 40 11395 13999 8 40 11395 13999 8 40 11395 14001 7 40 11395 14002 4 40 11395 14002 4 40 11395 14002 4 40 11395 14002 4 40 11395 14006 2 40 11395 14009 3 40 11395 14011 6 40 11395 16995 7 40 11395 15785 5 40 11395 14031 4 40 11395 14024 6 40 11395 14024 6 40 11395 14032 1 40 11395 14025 3 40 11395 14025 3 40 11395 14025 3 40 11395 14026 0 40 11395 13588 4 40 11395 13588 4 40 11395 13588 4 40 11395 13588 4 40 11395 14030 7 40 11395 14033 8 40 11395 14034 5 40 11395 16997 1 40 11395 14044 4 40 11395 14035 2 40 11395 14035 2 40 11395 14045 1 40 11395 14036 9 40 11395 14036 9 40 11395 14036 9 40 11395 14037 6 40 11395 14038 3 40 11395 14038 3 40 11395 14038 3 40 11395 14038 3 40 11395 14043 7 40 11395 14046 8 40 11395 14047 5 40 11395 16999 5 40 11395 14089 5 40 11395 14082 6 40 11395 14082 6 40 11395 14091 8 40 11395 14083 3 40 11395 14083 3 40 11395 14083 3 40 11395 14084 0 40 11395 13602 7 40 11395 13602 7 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 79 79 79 79 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 108 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 79 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82 85 85 85 85 85 85 85 85 85 85 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 193 B Selection Table According to Type B Type Order code EAN PG Page 6128/01-84-500 6128/01-84-500 6128/01-866-500 6128/01-884-500 6128/01-885-500 6128/01-896-500 6129/01-803-500 6129/01-81-500 6129/01-81-500 6129/01-815-500 6129/01-82-500 6129/01-82-500 6129/01-82-500 6129/01-83-500 6129/01-84-500 6129/01-84-500 6129/01-84-500 6129/01-84-500 6129/01-866-500 6129/01-884-500 6129/01-885-500 6129/01-896-500 6129/96-509 6129/98-509 6131/10-183-500 6131/10-24-500 6131/11-183-500 6131/11-24-500 6131/20-183-500 6131/20-24-500 6131/21-183-500 6131/21-24-500 6131/29-183-500 6131/29-24-500 6131/30-183-500 6131/30-24-500 6131/31-183-500 6131/31-24-500 6131/39-183-500 6131/39-24-500 6131/40-24-500 6136/100 C-102-500 6136/100 CB-102 6136/10-500 6136/11-500 6136/15-500 6136/UP 6138/11-83-500 6138/11-84-500 6149/21-500 6151/11 U-500 6152/11 U-500 6164/11 U-500 6173/11 U-500 6179/01-204-500 6179/01-208-500 6179/02-204-500 6179/02-208-500 6179-500 6186/01 UP-500 6197/12-101-500 6197/13-101-500 6197/14-101-500 6134-0-0261 6134-0-0261 6134-0-0290 6134-0-0293 6134-0-0294 6134-0-0306 6135-0-0163 6135-0-0156 6135-0-0156 6135-0-0164 6135-0-0157 6135-0-0157 6135-0-0157 6135-0-0158 6135-0-0146 6135-0-0146 6135-0-0146 6135-0-0146 6135-0-0162 6135-0-0165 6135-0-0166 6135-0-0170 6118-0-0105 6118-0-0108 6132-0-0297 6132-0-0295 6132-0-0301 6132-0-0299 6132-0-0343 6132-0-0342 6132-0-0345 6132-0-0344 6132-0-0352 6132-0-0351 6132-0-0347 6132-0-0346 6132-0-0349 6132-0-0348 6132-0-0354 6132-0-0353 6132-0-0350 6136-0-0185 6136-0-0186 6136-0-0139 6136-0-0141 6136-0-0196 6136-0-0124 6138-0-0005 6138-0-0003 6133-0-0201 6151-0-0245 6152-0-0040 6151-0-0247 6151-0-0249 6132-0-0313 6132-0-0314 6132-0-0317 6132-0-0318 6132-0-0320 6186-0-0023 6197-0-0036 6197-0-0037 6197-0-0038 40 11395 13602 7 40 11395 13602 7 40 11395 14088 8 40 11395 14092 5 40 11395 14093 2 40 11395 17002 1 40 11395 14101 4 40 11395 14094 9 40 11395 14094 9 40 11395 14102 1 40 11395 14095 6 40 11395 14095 6 40 11395 14095 6 40 11395 14096 3 40 11395 13616 4 40 11395 13616 4 40 11395 13616 4 40 11395 13616 4 40 11395 14100 7 40 11395 14103 8 40 11395 14104 5 40 11395 17004 5 40 11395 15788 6 40 11395 15792 3 40 11395 14774 0 40 11395 14772 6 40 11395 14778 8 40 11395 14776 4 40 11395 18589 6 40 11395 18588 9 40 11395 18591 9 40 11395 18590 2 40 11395 18599 5 40 11395 18598 8 40 11395 18593 3 40 11395 18592 6 40 11395 18596 4 40 11395 18594 0 40 11395 18601 5 40 11395 18600 8 40 11395 18597 1 40 11395 10675 4 40 11395 10676 1 40 11395 07927 0 40 11395 07929 4 40 11395 15694 0 40 11395 04437 7 40 11395 11613 5 40 11395 11609 8 40 11395 11896 2 40 11395 16395 5 40 11395 16397 9 40 11395 16399 3 40 11395 16402 0 40 11395 16854 7 40 11395 16856 1 40 11395 16861 5 40 11395 16862 2 40 11395 16865 3 40 11395 15886 9 40 11395 16366 5 40 11395 16367 2 40 11395 16368 9 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 34 33 33 33 85 85 85 85 85 85 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 109 109 45 45 45 45 42 42 42 42 44 44 43 43 43 43 44 44 44 59 59 59 59 59 59 50 50 76 20 20 20 20 46 46 46 46 46 58 41 41 41 194 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Type Type Order code EAN PG Page 6197/15-101-500 6197/52-101-500 6197/53-101-500 6320/10-20-500 6320/10-24G-500 6320/10-260-500 6320/10-79-500 6320/10-83-500 6320/30-20-500 6320/30-24G-500 6320/30-260-500 6320/30-79-500 6320/30-83-500 6320/38-20-500 6320/38-24G-500 6320/38-260-500 6320/38-79-500 6320/38-83-500 6320/50-20-500 6320/50-24G-500 6320/50-260-500 6320/50-79-500 6320/50-83-500 6320/58-20-500 6320/58-24G-500 6320/58-260-500 6320/58-79-500 6320/58-83-500 6340-24G-101-500 6340-811-101-500 6340-825-101-500 6340-866-101-500 6341-24G-101-500 6341-811-101-500 6341-825-101-500 6341-866-101-500 6342-24G-101-500 6342-811-101-500 6342-825-101-500 6342-866-101-500 6344-24G-101-500 6344-811-101-500 6344-825-101-500 6344-866-101-500 6345-24G-101-500 6345-811-101-500 6345-825-101-500 6345-866-101-500 6346/10-101-500 6346/11-101-500 6346/12-101-500 6348-24G-101-500 6348-811-101-500 6348-825-101-500 6348-866-101-500 6349-24G-101-500 6349-811-101-500 6349-825-101-500 6349-860-101-500 6350-825-101-500 6351-825-101-500 6352-24G-101-500 6352-811-101-500 6197-0-0039 6197-0-0040 6197-0-0041 6320-0-0002 6320-0-0004 6320-0-0010 6320-0-0006 6320-0-0008 6320-0-0012 6320-0-0014 6320-0-0020 6320-0-0016 6320-0-0018 6320-0-0022 6320-0-0024 6320-0-0030 6320-0-0026 6320-0-0028 6320-0-0032 6320-0-0034 6320-0-0040 6320-0-0036 6320-0-0038 6320-0-0042 6320-0-0044 6320-0-0050 6320-0-0046 6320-0-0048 6310-0-0109 6310-0-0168 6310-0-0108 6310-0-0106 6310-0-0117 6310-0-0170 6310-0-0116 6310-0-0114 6310-0-0125 6310-0-0172 6310-0-0124 6310-0-0122 6310-0-0133 6310-0-0174 6310-0-0132 6310-0-0130 6310-0-0081 6310-0-0176 6310-0-0080 6310-0-0078 6310-0-0135 6310-0-0137 6310-0-0139 6310-0-0147 6310-0-0178 6310-0-0146 6310-0-0144 6310-0-0155 6310-0-0180 6310-0-0154 6310-0-0152 6310-0-0157 6310-0-0092 6310-0-0165 6310-0-0182 40 11395 16369 6 40 11395 16371 9 40 11395 16372 6 40 11395 13857 1 40 11395 13873 1 40 11395 13879 3 40 11395 13875 5 40 11395 13877 9 40 11395 13882 3 40 11395 13885 4 40 11395 13892 2 40 11395 13887 8 40 11395 13889 2 40 11395 13895 3 40 11395 13897 7 40 11395 13904 2 40 11395 13900 4 40 11395 13902 8 40 11395 13911 0 40 11395 13914 1 40 11395 13921 9 40 11395 13916 5 40 11395 13918 9 40 11395 13923 3 40 11395 13926 4 40 11395 13933 2 40 11395 13928 8 40 11395 13931 8 40 11395 13092 6 40 11395 15674 2 40 11395 13091 9 40 11395 13088 9 40 11395 13100 8 40 11395 15676 6 40 11395 13099 5 40 11395 13097 1 40 11395 13108 4 40 11395 15678 0 40 11395 13107 7 40 11395 13105 3 40 11395 13117 6 40 11395 15681 0 40 11395 13116 9 40 11395 13114 5 40 11395 11873 3 40 11395 15683 4 40 11395 11872 6 40 11395 11868 9 40 11395 13119 0 40 11395 13122 0 40 11395 13124 4 40 11395 13132 9 40 11395 15685 8 40 11395 13131 2 40 11395 13129 9 40 11395 13142 8 40 11395 15687 2 40 11395 13140 4 40 11395 13137 4 40 11395 13144 2 40 11395 11891 7 40 11395 13152 7 40 11395 15689 6 33 33 33 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 41 41 41 92 92 92 92 92 92 92 92 92 92 93 93 93 93 93 93 93 93 93 93 94 94 94 94 94 73 73 73 73 74 74 74 74 74 74 74 74 74 74 74 74 75 75 75 75 73 73 73 75 75 75 75 75 75 75 75 75 76 76 76 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 195 B Selection Table According to Type B Type Order code EAN PG Page 6352-825-101-500 6352-860-101-500 6353/20-860-500 6353/30-860-500 6353/40-860-500 6353/50-860-500 6354 U-500 6355 U-500 6356 U-500 6404 U 6541-20 6541-21 6541-22G 6541-24 6541-24G 6541-260 6541-266 6541-72 6541-74 6541-774 6541-775 6541-777 6541-783 6541-79 6541-803 6541-81 6541-81 6541-815 6541-82 6541-82 6541-82 6541-83 6541-84 6541-84 6541-84 6541-84 6541-866 6541-884 6541-885 6541-896 6595 U 6701-101-500 6702-500 6703-500 6704-500 6705-101-500 6720-64 6720-65 6720-66 6721-64 6721-65 6725-500 6730-20 6730-21 6730-212 6730-214 6730-22G 6730-24 6730-24G 6730-260 6730-266 6730-803 6730-81 6310-0-0164 6310-0-0162 6310-0-0093 6310-0-0094 6310-0-0095 6310-0-0096 6310-0-0097 6310-0-0098 6310-0-0099 6401-0-0055 6599-0-1466 6599-0-1524 6599-0-2795 6599-0-1557 6599-0-2332 6599-0-2853 6599-0-2856 6599-0-2918 6599-0-2076 6599-0-2971 6599-0-2975 6599-0-2933 6599-0-2919 6599-0-2142 6599-0-2940 6599-0-2882 6599-0-2882 6599-0-2936 6599-0-2832 6599-0-2832 6599-0-2832 6599-0-2885 6599-0-2835 6599-0-2835 6599-0-2835 6599-0-2835 6599-0-2924 6599-0-2962 6599-0-2967 6599-0-2998 6590-0-0188 6700-0-0040 6700-0-0023 6700-0-0024 6700-0-0025 6700-0-0042 6720-0-0001 6720-0-0002 6720-0-0003 6720-0-0004 6720-0-0005 6720-0-0008 6730-0-0007 6730-0-0008 6730-0-0001 6730-0-0002 6730-0-0009 6730-0-0010 6730-0-0011 6730-0-0005 6730-0-0006 6730-0-0025 6730-0-0014 40 11395 13151 0 40 11395 13149 7 40 11395 11892 4 40 11395 11893 1 40 11395 11894 8 40 11395 11895 5 40 11395 11897 9 40 11395 11898 6 40 11395 11899 3 40 11395 09383 2 40 11395 38100 7 40 11395 38150 2 40 11395 91730 5 40 11395 38180 9 40 11395 70860 6 40 11395 00548 4 40 11395 00634 4 40 11395 08281 2 40 11395 54180 7 40 11395 12956 2 40 11395 13692 8 40 11395 10754 6 40 11395 08346 8 40 11395 55810 2 40 11395 11115 4 40 11395 05642 4 40 11395 05642 4 40 11395 11111 6 40 11395 99569 3 40 11395 99569 3 40 11395 99569 3 40 11395 07445 9 40 11395 99663 8 40 11395 99663 8 40 11395 99663 8 40 11395 99663 8 40 11395 08815 9 40 11395 12964 7 40 11395 12965 4 40 11395 16703 8 40 11395 09385 6 40 11395 18264 2 40 11395 13434 4 40 11395 13436 8 40 11395 13437 5 40 11395 18266 6 40 11395 09372 6 40 11395 09381 8 40 11395 09382 5 40 11395 11211 3 40 11395 11212 0 40 11395 18271 0 40 11395 09353 5 40 11395 09354 2 40 11395 09336 8 40 11395 09337 5 40 11395 09355 9 40 11395 09356 6 40 11395 09357 3 40 11395 09351 1 40 11395 09352 8 40 11395 11120 8 40 11395 09361 0 34 34 34 34 34 34 34 34 34 14 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 14 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 76 76 76 76 76 76 72 72 72 164 99 99 99 99 99 99 99 99 99 99 99 99 99 99 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 164 160 160 160 161 161 165 165 165 165 165 158 162 162 162 162 162 162 162 162 162 163 163 196 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Type Type Order code EAN PG Page 6730-81 6730-815 6730-82 6730-82 6730-82 6730-83 6730-84 6730-84 6730-84 6730-84 6730-866 6730-884 6730-885 6730-896-500 6731-212-500 6731-214-500 6731-82-500 6731-83-500 6731-84-500 6731-866-500 6732-212-500 6732-214-500 6732-82-500 6732-83-500 6732-84-500 6732-866-500 6733-82-500 6733-83-500 6733-84-500 6733-866-500 6747 AGM-201-500 6747 AGM-204-500 6747 AGM-208-500 6747 AGM-35-500 6770-500 6770-500 6780-500 6824-84 6828 6829-84 6833/01-84-500 6833-84-500 6835/01-84-500 6885-183-500 6885-500 8136/01 UP-500 8136/09-811-500 8136/09-825-500 8136/12-811-500 8136/12-825-500 8186/03-500 8186/04-500 A41 111 - 100 A41 112 - 100 A41 113 - 100 A41 212 - 100 A41 311 - 100 A41 312 - 100 A41 313 - 100 A41 412 - 100 A41 413 - 100 A41 512 - 100 A41 513 - 100 6730-0-0014 6730-0-0024 6730-0-0015 6730-0-0015 6730-0-0015 6730-0-0016 6730-0-0017 6730-0-0017 6730-0-0017 6730-0-0017 6730-0-0023 6730-0-0026 6730-0-0027 6730-0-0066 6730-0-0028 6730-0-0030 6730-0-0032 6730-0-0035 6730-0-0038 6730-0-0041 6730-0-0029 6730-0-0031 6730-0-0033 6730-0-0036 6730-0-0039 6730-0-0042 6730-0-0034 6730-0-0037 6730-0-0040 6730-0-0043 6700-0-0038 6700-0-0035 6700-0-0036 6700-0-0037 6770-0-0002 6770-0-0002 6780-0-0001 6800-0-2516 6800-0-2514 6800-0-2515 6800-0-2721 6800-0-2720 6800-0-2723 6899-0-0297 6899-0-0282 8136-0-0032 8136-0-0024 8136-0-0026 8136-0-0028 8136-0-0030 8100-0-0344 8100-0-0346 2CMA170554R1000 2CMA170500R1000 2CMA100240R1000 2CMA170501R1000 2CMA170502R1000 2CMA170503R1000 2CMA170504R1000 2CMA170505R1000 2CMA170506R1000 2CMA100237R1000 2CMA170508R1000 40 11395 09361 0 16 40 11395 11119 2 16 40 11395 09362 7 16 40 11395 09362 7 16 40 11395 09362 7 16 40 11395 09363 4 16 40 11395 09364 1 16 40 11395 09364 1 16 40 11395 09364 1 16 40 11395 09364 1 16 40 11395 09371 9 16 40 11395 13035 3 16 40 11395 13036 0 16 40 11395 16710 6 16 40 11395 13404 7 16 40 11395 13406 1 16 40 11395 13408 5 16 40 11395 13422 1 16 40 11395 13425 2 16 40 11395 13429 0 16 40 11395 13405 4 16 40 11395 13407 8 16 40 11395 13409 2 16 40 11395 13423 8 16 40 11395 13427 6 16 40 11395 13431 3 16 40 11395 13421 4 16 40 11395 13424 5 16 40 11395 13428 3 16 40 11395 13432 0 16 40 11395 17591 0 29 40 11395 17588 0 29 40 11395 17589 7 29 40 11395 17590 3 29 40 11395 11896 2 26 40 11395 11896 2 26 40 11395 13433 7 16 40 11395 13747 5 14 40 11395 13745 1 14 40 11395 13746 8 14 40 11395 18697 8 14 40 11395 18696 1 14 40 11395 18699 2 14 40 11395 06826 7 40 11395 00468 5 29 40 11395 15891 3 34 40 11395 15877 7 34 40 11395 15879 1 34 40 11395 15882 1 34 40 11395 15884 5 34 40 11395 17146 2 32 40 11395 17148 6 32 73 9269670554 7 73 9269670500 4 73 9269600240 0 73 92696 70501 1 73 92696 70502 8 73 92696 70503 5 73 92696 70504 2 73 92696 70505 9 73 92696 70506 6 73 92696 00237 0 73 92696 70508 0 163 163 163 163 163 163 163 163 163 163 163 163 163 163 156 156 156 156 156 156 156 156 157 157 157 157 157 157 157 157 159 159 159 159 12 161 158 153 153 153 153 153 153 45 45 59 58 58 58 58 11 11 121 121 121 121 121 121 121 121 121 121 121 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 197 B Selection Table According to Type Type B Order code EAN PG Page A42 111 - 100 2CMA170555R1000 73 92696 70555 4 122 A42 112 - 100 2CMA170510R1000 73 92696 70510 3 122 A42 113 - 100 2CMA100242R1000 73 92696 00242 4 122 A42 212 - 100 2CMA170511R1000 73 92696 70511 0 122 A42 312 - 100 2CMA170512R1000 73 92696 70512 7 122 A42 412 - 100 2CMA170513R1000 73 92696 70513 4 122 A42 413 - 100 2CMA170514R1000 73 92696 70514 1 122 A42 552 - 100 2CMA100238R1000 73 92696 00238 7 122 A42 553 - 100 2CMA170516R1000 73 92696 00244 8 122 A43 111 - 100 2CMA170520R1000 73 92696 70520 2 123 A43 112 - 100 2CMA100244R1000 73 92696 00244 8 123 A43 113 - 100 2CMA100245R1000 73 92696 00245 5 123 A43 121 - 100 2CMA170521R1000 73 92696 70521 9 123 A43 211 - 100 2CMA100012R1000 73 92696 00012 3 123 A43 212 - 100 2CMA170522R1000 73 92696 70522 6 123 A43 213 - 100 2CMA170523R1000 73 92696 70523 3 123 A43 311 - 100 2CMA170524R1000 73 92696 70524 0 123 A43 312 - 100 2CMA170525R1000 73 92696 70525 7 123 A43 313 - 100 2CMA170526R1000 73 92696 70526 4 123 A43 412 - 100 2CMA170528R1000 73 92696 70528 8 123 A43 413 - 100 2CMA170529R1000 73 92696 70529 5 123 A43 511 - 100 2CMA100143R1000 73 92696 00143 4 123 A43 512 - 100 2CMA170531R1000 73 92696 70531 8 123 A43 513 - 100 2CMA170532R1000 73 92696 70532 5 123 A44 111 - 100 2CMA170533R1000 73 92696 70533 2 124 A44 112 - 100 2CMA100248R1000 73 92696 00248 6 124 A44 113 - 100 2CMA100249R1000 73 92696 00249 3 124 A44 211 - 100 2CMA100013R1000 73 92696 00013 0 124 A44 212 - 100 2CMA170534R1000 73 92696 70534 9 124 A44 213 - 100 2CMA170535R1000 73 92696 70535 6 124 A44 311 - 100 2CMA170536R1000 73 92696 70536 3 124 A44 352 - 100 2CMA170537R1000 73 92696 70537 0 124 A44 353 - 100 2CMA170538R1000 73 92696 70538 7 124 A44 452 - 100 2CMA170540R1000 73 92696 70540 0 124 A44 453 - 100 2CMA170541R1000 73 92696 70541 7 124 A44 552 - 100 2CMA170545R1000 73 92696 70545 5 124 A44 553 - 100 2CMA170546R1000 73 92696 70546 2 124 AA/S 4.1 2CDG120005R0011 40 16779 65886 7 20 30 AAM/S 4.1 2CDG120006R0011 40 16779 65887 4 20 30 ABL/S 2.1 2CDG110073R0011 40 16779 65264 3 26 53 ABZ/S 2.1 2CDG110072R0011 40 16779 65236 0 26 53 ADB GHV9210018V0020 40 13232 53420 1 50 149 ADB1 GHV9210018V0021 40 13232 58440 4 50 149 AE/A 2.1 2CDG110086R0011 40 16779 66401 1 26 24 AE/S 4.1.1.3 2CDG110190R0011 40 1677992929 5 26 24 AE/S 4.2 2CDG110030R0011 40 16779 58763 1 26 24 AM/S 12.1 GHQ6310062R0111 40 16779 51481 1 26 7 AM50701-GR (6123/20-500) 40 11395 15797 8 103 AM50702-GR (6123/21-500) 40 11395 15798 5 103 AM50703-GR (6123/22-500) 40 11395 15799 2 103 AM50704-GR (6123/23-500) 40 11395 15801 2 103 AM50705-GR (6123/24-500) 40 11395 17645 0 103 AM50706-GR (6123/26-500) 40 11395 17646 7 103 AMD5053104 AMD5153-AG104 AMD5153-MG104 AMD5153-SB104 AMD5153-ST104 AMD5253-AG104 AMD5253-MG104 AMD5253-SB104 AMD5253-ST104 AMD70053-AN (6124/20-981-500) 40 11395 15794 7 103 198 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Type Type Order code AMD70153-AN (6122/20-981-500) AMD72053-AN (6125/20-981-500) AMD74053-AN (6126/20-981-500) AMD76053-AN (6129/20-981-500) AMD76153-AN (6129/21-981-500) AMSE GHV9250010V0003 AMSP GHV9250010V0004 B21 111 - 100 2CMA100149R1000 B21 112 - 100 2CMA100150R1000 B21 113 - 100 2CMA100151R1000 B21 212 - 100 2CMA100152R1000 B21 311 - 100 2CMA100154R1000 B21 312 - 100 2CMA100155R1000 B21 313 - 100 2CMA100156R1000 B23 111 - 100 2CMA100163R1000 B23 112 - 100 2CMA100164R1000 B23 113 - 100 2CMA100165R1000 B23 212 - 100 2CMA100166R1000 B23 311 - 100 2CMA100168R1000 B23 312 - 100 2CMA100169R1000 B23 313 - 100 2CMA100170R1000 B24 111 - 100 2CMA100177R1000 B24 112 - 100 2CMA100178R1000 B24 113 - 100 2CMA100179R1000 B24 212 - 100 2CMA100180R1000 B24 351 - 100 2CMA100182R1000 B24 352 - 100 2CMA100183R1000 B24 353 - 100 2CMA100184R1000 BDB/S 1.1 2CDG110067R0011 BE/M 4.12.1 2CDG110007R0011 BE/M 4.230.1 2CDG110005R0011 BE/M 4.24.1 2CDG110006R0011 BE/S 4.20.2.1 2CDG110090R0011 BE/S 4.230.2.1 2CDG110091R0011 BE/S 8.20.2.1 2CDG110092R0011 BE/S 8.230.2.1 2CDG110093R0011 BT/A 1.1 2CDG280001R0011 BUSKLEMME GHQ6301901R0001 C11 110 - 100 2CMA100014R1000 C11 110 - 300 2CMA170550R1000 C13 110 - 100 2CMA100191R1000 C13 110 - 300 2CMA100192R1000 CP-D 24/2.5 2CDG120037R0011 DG/S 1.1 2CDG110026R0011 DG/S 1.16.1 2CDG110103R0011 DG/S 8.1 2CDG110025R0011 DGN/S 1.16.1 2CDG110142R0011 DGT-0-1K-AB 8110-0-0001 DGT-1-1K-AB 8110-0-0002 DGT-2-1K-AB 8110-0-0003 DGT-3-1K-AB 8110-0-0004 DGT-DIN-AB 8110-0-0020 DGT-LIZ-100-AB 8110-0-0036 DGT-MBU-AB 8110-0-0017 DGT-MNG-100-AB 8110-0-0023 DGT-OBI-AB 8110-0-0022 DGT-OPC-AB 8110-0-0018 DGT-PWR-AB 8110-0-0019 DGT-VIS-1K-AB 8110-0-0030 DLR/A 4.8.1.1 2CDG110172R0011 DLR/S 8.16.1M 2CDG110101R0011 DR/S 4.1 2CDG110029R0011 DSA/S 2.16.1 2CDG110009R0011 EAN PG Page 40 11395 15777 0 40 11395 15781 7 40 11395 15784 8 40 11395 15787 9 40 11395 15791 6 40 16779 49290 4 50 40 16779 49280 5 50 73 9269600150 2 73 9269600151 9 73 9269600154 0 73 92696 00152 6 73 9269600155 7 73 9269600156 4 73 9269600163 2 73 9269600164 9 73 9269600165 6 73 9269600168 7 73 92696 00166 3 73 9269600169 4 73 9269600170 0 73 9269600177 9 73 9269600178 6 73 9269600179 3 73 9269600182 3 73 92696 00180 9 73 9269600183 0 73 9269600184 7 73 9269600237 0 40 16779 65753 2 26 40 16779 58313 8 26 40 16779 58311 4 26 40 16779 58312 1 26 40 16779 71078 7 26 40 16779 71106 7 26 40 16779 71076 3 26 40 16779 71077 0 26 40 16779 92556 3 26 40 12233 80230 2 20 73 92696 00014 7 73 9269670555 4 73 92696 00191 5 73 92696 00192 2 40 16779 69789 7 20 40 16779 58583 5 26 40 16779 66950 4 26 40 16779 58582 8 26 40 16779 84556 4 26 40 11395 19371 6 37 40 11395 19372 3 37 40 11395 19373 0 37 40 11395 19374 7 37 40 11395 19392 1 37 40 11395 19411 9 37 40 11395 19387 7 37 40 11395 19395 2 37 40 11395 19394 5 37 40 11395 19389 1 37 40 11395 19391 4 37 40 11395 19404 1 37 40 16779 88237 8 26 40 16779 67656 4 26 40 16779 58755 6 26 40 16779 58584 2 26 103 102 102 102 102 147 147 128 128 128 128 128 128 128 129 129 129 129 129 129 129 130 130 130 130 130 130 130 137 17 17 17 23 23 23 23 143 13 134 134 134 134 76 38 38 38 38 170 170 170 170 171 171 171 170 171 171 171 170 39 39 8 39 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 199 B Selection Table According to Type B Type Order code EAN PG Page DSM/S 1.1 EG/A 32.2.1 EIM/D EIM/KB EIM/KC EIM/XB EIM/XC EM/S 3.16.1 EP ER/U 1.1 ES/M 2.230.1 ES/M 2.24.1 ES/S 4.1.2.1 ES/S 8.1.2.1 ESPE EUB/S 1.1 EVSB FAD/A 1.1 FAG/A 1.1 FC/S 1.1 FC600/BREL FC650/O FC650/TMAX FCA/S 1.1M FCA/S 1.2.2.1 FCL/S 1.6.1.1 FCL/S 2.6.1.1 FPA03 FW/S 8.2.1 GM/A 8.1 GP2 HS/S 4.2.1 IO/S 4.6.1.1 IO/S 8.6.1.1 IPM/S 1.1 IPR/S 2.1 IPS/S 2.1 IR/KB IR/XB IR/XC ISM/S 5.1 ISS/S 5.1 JA/M 2.230.1 JA/M 2.24.1 JA/S 4.SMI.1M JRA/S 2.230.1.1 JRA/S 2.230.2.1 JRA/S 2.230.5.1 JRA/S 4.230.1.1 JRA/S 4.230.2.1 JRA/S 4.230.5.1 JRA/S 4.24.5.1 JRA/S 8.230.1.1 JRA/S 8.230.2.1 JRA/S 8.230.5.1 JSB/S 1.1 KLEMME KS/K 2.1 KS/K 4.1 L208/V.24 L240/BS L240/ENG L240/IP 2CDG110060R0011 2CDG120047R0011 2CDG230039R0011 2CDG230028R0011 2CDG230029R0011 2CDG230025R0011 2CDG230026R0011 2CDG110148R0011 GHQ7132443R0003 GHQ6310044R0111 2CDG110013R0011 2CDG110014R0011 2CDG110058R0011 2CDG110059R0011 GHV9250010V0001 2CDG110066R0011 GHV9250010V0002 2CDG120040R0011 2CDG120041R0011 2CDG120001R0011 2CDG430051R0011 2CDG430073R0011 2CDG430081R0011 2CDG110084R0011 2CDG110141R0011 2CDG110163R0011 2CDG110164R0011 GHV9020012V0021 2CDG120039R0011 2CDG110150R0011 GHV9220004V0004 2CDG120044R0011 2CDG110168R0011 2CDG110169R0011 2CDG120036R0011 2CDG110061R0011 2CDG110098R0011 2CDG230027R0011 2CDG230023R0011 2CDG230024R0011 2CDG120034R0011 2CDG120035R0011 2CDG110003R0011 2CDG110004R0011 2CDG110028R0011 2CDG110129R0011 2CDG110120R0011 2CDG110124R0011 2CDG110130R0011 2CDG110121R0011 2CDG110125R0011 2CDG110128R0011 2CDG110131R0011 2CDG110122R0011 2CDG110126R0011 GHQ6310084R0111 GHQ6301902R0001 GHQ6301910R0011 GHQ6301910R0001 GHQ3280220R0001 GHQ3050031R0001 2CDG230017R0011 2CDG230013R0011 40 16779 65205 6 40 16779 94257 7 40 16779 87766 4 40 16779 75717 1 40 16779 75718 8 40 16779 67879 7 40 16779 67880 3 40 16779 87706 0 40 13232 04220 1 40 16779 49725 1 40 16779 58361 9 40 16779 58362 6 40 16779 67206 1 40 16779 67207 8 40 13232 70140 5 40 16779 64991 9 40 16779 44170 4 40 16779 90668 5 40 16779 90669 2 40 16779 58383 1 40 16779 70840 1 40 16779 86479 4 40 16779 86477 0 40 16779 66508 7 40 16779 87727 5 40 16779 87788 6 40 16779 87787 9 40 16779 53444 4 40 16779 90666 1 40 16779 90630 2 40 13232 66670 4 40 16779 90672 2 40 16779 88107 4 40 16779 88108 1 40 16779 69790 3 40 16779 65229 2 40 16779 66484 4 40 16779 75716 4 40 16779 67877 3 40 16779 67878 0 40 1677969792 7 40 16779 69791 0 40 16779 58315 2 40 16779 58316 9 40 16779 65423 4 40 16779 69848 1 40 16779 69839 9 40 16779 69843 6 40 16779 69849 8 40 16779 69840 5 40 16779 69844 3 40 16779 69847 4 40 16779 69850 4 40 16779 69841 2 40 16779 69845 0 40 16779 57993 3 40 16779 07930 3 40 16779 52893 1 40 16779 51725 6 40 16779 44510 8 40 16779 58561 3 40 16779 66852 1 40 16779 66856 9 26 26 50 50 50 50 50 26 50 26 26 26 26 26 50 26 50 20 20 20 50 50 50 26 26 26 26 50 20 26 50 20 26 26 20 26 26 50 50 50 20 20 26 26 26 26 26 26 26 26 26 26 26 26 26 26 20 20 20 50 50 50 50 13 12 150 150 150 145 145 114 149 49 18 18 49 49 147 137 147 54 54 51 151 151 151 50 50 50 50 152 54 143 148 41 30 30 11 10 10 149 145 145 10 11 17 17 35 35 34 34 35 34 34 34 35 34 34 35 13 8 8 144 147 144 144 200 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Type Type Order code EAN PG Page L240/MG2 2CDG220003R0011 40 16779 65737 2 50 146 L240/PT 2CDG230014R0011 40 16779 66855 2 50 144 L840/MG4 GHQ3280011R0001 40 13232 73240 9 50 146 LF/U 2.1 2CDG110089R0011 40 16779 66416 5 26 40 LFO/A 1.1 2CDG120045R0011 40 16779 90673 9 20 41 LGS/A 1.1 2CDG120038R0011 40 16779 83712 5 20 51 LK/S 4.2 2CDG110171R0011 40 16779 88167 8 26 10 LKS GHQ4001906R0001 40 13232 39280 1 50 148 LL/S 1.1 GHQ6050053R0001 40 16779 39210 5 20 12 LM/S 1.1 GHQ6310080R0111 40 16779 58121 9 26 53 LR/M 1.6.2 2CDG110108R0011 40 16779 68067 7 26 18 LR/S 2.16.1 2CDG110087R0011 40 16779 66405 9 26 40 LR/S 4.16.1 2CDG110088R0011 40 16779 66489 9 26 40 MG/A 4.4.1 2CDG110186R0011 40 16779 92552 5 26 143 MG/E 4.4.1 2CDG110178R0011 40 16779 92549 5 26 143 MRS/B GHQ3201972R0002 40 16779 50659 5 50 148 MRS/W GHQ3201972R0001 40 16779 50660 1 50 148 MT 701.2, SR GHQ6050059R0006 40 16779 57582 9 20 55 MT 701.2, WS GHQ6050059R0005 40 16779 57581 2 20 55 MT/S 4.12.2M 2CDG110109R0011 40 16779 71187 6 26 139 MT/S 8.12.2M 2CDG110110R0011 40 16779 71186 9 26 139 MT/U 2.12.2 2CDG110111R0011 40 16779 71176 0 26 139 MW GHV9230039V0020 40 13232 66580 6 50 145 MW GHV9230039V0020 40 13232 66580 6 50 150 N2221.2 AN 2CL0N222128 84 27238 10033 3 108 N2221.2 BL 2CL0N222121 84 27238 10032 6 108 N2221.2 PL 2CL0N222123 84 27238 10034 0 108 N2221.4 AN 2CL0N222148 84 27238 10044 9 108 N2221.4 BL 2CL0N222141 84 27238 10043 2 108 N2221.4 PL 2CL0N222143 84 27238 10045 6 108 N2221.6 AN 2CL0N222168 84 27238 10054 8 109 N2221.6 BL 2CL0N222161 84 27238 10053 1 109 N2221.6 PL 2CL0N222163 84 27238 10055 5 109 N2221.7 AN 2CL0N222178 84 27238 10066 1 109 N2221.7 BL 2CL0N222171 84 27238 10065 4 109 N2221.7 PL 2CL0N222173 84 27238 10067 8 109 N2240.4 AN 2CL0N224048 84 27238 10072 2 110 N2240.4 BL 2CL0N224041 84 27238 10071 5 110 N2240.4 PL 2CL0N224043 84 27238 10073 9 110 N2241.4 AN 2CL0N224148 84 27238 10072 2 110 N2241.4 BL 2CL0N224141 84 27238 10081 4 110 N2241.4 PL 2CL0N224143 84 27238 10083 8 110 N2271 XX 111 N2271.1 XX 111 N2271.9111 N2272 XX 111 N2272.1 XX 111 N2273 XX 111 N2273.1 XX 111 N2274 XX 111 N2274.1 XX 111 N2371.9V112 N2372.1 XX 112 ND/W GHQ7132443R0011 40 13232 02540 2 50 149 NDA/W GHQ7132443R0004 40 13232 61690 7 50 149 NDU/W GHQ7132443R0021 40 13232 02550 1 50 149 NT/S 12.1600 GHQ6050056R0002 40 16779 51467 5 20 9 NT/S 24.800 GHQ6050057R0002 40 16779 51468 2 20 9 NTI/Z 28.30.1 2CDG110096R0011 40 16779 66316 8 26 8 NTU/S 12.2000.1 2CDG110070R0011 40 16779 68117 9 26 9 PK/E 2.1 2CDG120043R0011 40 16779 90671 5 20 54 PS 1/4/6-KNX 2CDG924003R0011 40 16779 66758 6 20 13 PS 1/60/6-KNX 2CDG924004R0011 40 16779 66759 3 20 13 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 201 B Selection Table According to Type B Type Order code EAN PG Page PS/E 2.1 PS-END 1-S RC/A 4.2 RC/A 8.2 RL RM/S 1.1 RM/S 2.1 RM/S 3.1 RM/S 4.1 RTK SA/M 2.16.1 SA/M 2.6.1 SA/S 12.10.2.1 SA/S 12.16.2.1 SA/S 12.16.5.1 SA/S 12.16.6.1 SA/S 12.6.1.1 SA/S 12.6.2.1 SA/S 2.10.2.1 SA/S 2.16.2.1 SA/S 2.16.5.1 SA/S 2.16.6.1 SA/S 2.6.2.1 SA/S 4.10.2.1 SA/S 4.16.2.1 SA/S 4.16.5.1 SA/S 4.16.6.1 SA/S 4.6.1.1 SA/S 4.6.2.1 SA/S 8.10.2.1 SA/S 8.16.2.1 SA/S 8.16.5.1 SA/S 8.16.6.1 SA/S 8.6.1.1 SA/S 8.6.2.1 SAD/ED SAD/GAP SAD/GUP SAK12 SAK17 SAK17 SAK7 SAK7 SCM/S 1.1 SCS SD/M 2.6.2 SD/S 2.16.1 SD/S 4.16.1 SD/S 8.16.1 SE/S 3.16.1 SGL SJR/S4.24.2.1 SMB/S 1.1 SPGS/B SPGS/W SSF/G SSF/GB SSM/A SSM/U SSS ST/K 1.1 SU/S 30.640.1 SV/S 30.160.1.1 2CDG120042R0011 2CDL000001R0001 2CDG110104R0011 2CDG110106R0011 GHV9270013V0100 2CDG110094R0011 2CDG110095R0011 2CDG110165R0011 2CDG110170R0011 GHQ3201973R0021 2CDG110100R0011 2CDG110002R0011 2CDG110158R0011 2CDG110162R0011 2CDG110137R0011 2CDG110138R0011 2CDG110154R0011 2CDG110183R0011 2CDG110155R0011 2CDG110159R0011 2CDG110132R0011 2CDG110112R0011 2CDG110180R0011 2CDG110156R0011 2CDG110160R0011 2CDG110133R0011 2CDG110113R0011 2CDG110152R0011 2CDG110181R0011 2CDG110157R0011 2CDG110161R0011 2CDG110134R0011 2CDG110114R0011 2CDG110153R0011 2CDG110182R0011 GHQ3280014R0001 GHQ3280015R0001 GHQ3280013R0001 GHV9240001V0012 GHV9240001V0013 GHV9240001V0013 GHV9240001V0011 GHV9240001V0011 2CDG110024R0011 GHQ3050027R0001 2CDG110107R0011 2CDG110079R0011 2CDG110080R0011 2CDG110081R0011 2CDG110136R0011 GHQ3050008R0001 2CDG110143R0011 GHQ6310085R0111 GHV9220004V0010 GHV9220004V0009 GHQ3050017R0001 GHQ3050018R0001 2CDG240019R0011 2CDG240020R0011 GHV9270001V0001 2CDG120004R0011 GHQ6310049R0111 2CDG110144R0011 40 16779 90670 8 20 40 16779 66698 5 40 16779 67647 2 26 40 16779 68126 1 26 40 16779 86476 3 50 40 16779 66556 8 26 40 16779 66567 4 26 40 16779 88106 7 26 40 16779 88126 5 26 40 16779 50655 7 50 40 16779 68158 2 26 40 16779 58314 5 26 40 16779 87780 0 26 40 16779 87776 3 26 40 16779 71107 4 26 40 16779 76516 9 26 40 16779 87784 8 26 40 16779 92515 0 26 40 16779 87783 1 26 40 16779 87779 4 26 40 16779 70827 2 26 40 16779 70830 2 26 40 16779 92506 8 26 40 16779 87782 4 26 40 16779 87778 7 26 40 16779 70828 9 26 40 16779 70831 9 26 40 16779 87786 2 26 40 16779 92509 9 26 40 16779 87781 7 26 40 16779 87777 0 26 40 16779 70829 6 26 40 16779 70832 6 26 40 16779 87785 5 26 40 16779 92513 6 26 40 13232 73270 6 50 40 13232 73280 5 50 40 13232 73260 7 50 40 13232 74494 5 50 40 13232 74495 2 50 40 13232 74495 2 50 40 13232 74493 8 50 40 13232 74493 8 50 40 16779 58391 6 26 40 16779 58575 0 50 40 16779 68066 0 26 40 16779 65996 3 26 40 16779 65937 6 26 40 16779 65918 5 26 40 16779 70977 4 26 40 16779 53313 3 50 40 16779 86446 6 26 40 16779 58092 2 26 40 13232 61430 9 50 40 13232 61420 0 50 40 16779 53466 6 50 40 16779 53467 3 50 40 16779 83746 0 50 40 16779 83747 7 50 40 13232 02320 0 50 40 16779 63022 1 20 40 16779 51477 4 26 40 16779 86666 8 26 54 13 16 16 152 19 19 19 19 148 17 17 29 29 30 30 29 29 29 29 30 30 29 29 29 30 30 29 29 29 29 30 30 29 29 147 147 147 8 8 145 8 145 139 146 17 40 40 40 114 150 35 137 148 148 152 152 147 147 152 51 7 6 202 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Selection Table According to Type Type Order code EAN PG Page SV/S 30.320.1.1 SV/S 30.320.2.1 SV/S 30.640.3.1 SV/S 30.640.5.1 SWM 4 SWM4/RN TG/S 3.2 TG/Z 1.1 T-RAHM, SR T-RAHM, WS TS/K 1.1 TSA/K 230.1 TSA/K 24.1 UD/M 1.300.1 UD/S 2.300.2 UK/S 32.2 UP-KAST 2 US/E 1 US/U 12.2 US/U 2.2 US/U 2.2 US/U 4.2 US/U 4.2 USB/S 1.1 VA/Z 10.1 VA/Z 50.1 VA/Z 78.1 VA/Z 80.1 VAA/A 6.24.1 VAA/S 12.230.2.1 VAA/S 6.230.2.1 VB/K 100.1 VB/K 200.1 VB/K 270.1 VB/K 360.1 VMRS/B VMRS/W VSUE WA/Z 1.1 WEL/A, ES WELT/A, ES WES/A 2.1 WES/A 3.1 WRK/W WS/S 4.1 WS/S 4.1.1.2 WZ/S 1.1 WZ/S 1.3.1.2 XS/S 1.1 ZS/S 1.1 2CDG110166R0011 2CDG110145R0011 2CDG110167R0011 2CDG110146R0011 GHQ4030001R0004 GHQ4030001R0012 2CDG110135R0011 2CDG110119R0011 GHQ6050059R0012 GHQ6050059R0011 2CDG120002R0011 2CDG120007R0011 2CDG120008R0011 2CDG110012R0011 2CDG110074R0011 2CDG110071R0011 GHQ6050059R0014 GHQ6310009R0001 2CDG110065R0011 GHQ6310074R0111 GHQ6310074R0111 GHQ6310070R0111 GHQ6310070R0111 2CDG110008R0011 2CDG120009R0011 2CDG120010R0011 2CDG120011R0011 2CDG120012R0011 2CDG120032R0011 2CDG110117R0011 2CDG110116R0011 GHQ6301908R0003 GHQ6301908R0001 GHQ6301908R0002 GHQ6301908R0004 GHQ3201972R0012 GHQ3201972R0011 GHV9210018V0022 2CDG110174R0011 GHQ3050023R0001 GHQ3050024R0001 2CDG120033R0011 2CDG120046R0011 2CDG250003R0011 2CDG110032R0011 2CDG110191R0011 2CDG110034R0011 2CDG110184R0011 2CDG110075R0011 2CDG110083R0011 40 16779 90619 7 40 16779 83766 8 40 16779 90621 0 40 16779 86669 9 40 13232 05740 3 40 13232 05750 2 40 16779 70851 7 40 16779 69788 0 40 16779 49586 8 40 16779 49585 1 40 16779 58381 7 40 16779 65299 5 40 16779 65300 8 40 11395 04281 6 40 16779 66306 9 40 16779 65577 4 40 16779 51396 8 40 16779 00570 8 40 16779 65012 0 40 16779 56483 0 40 16779 56483 0 40 16779 56481 6 40 16779 56481 6 40 16779 58921 5 40 16779 65319 0 40 16779 65320 6 40 16779 65321 3 40 16779 65322 0 40 16779 67064 7 40 16779 82987 8 40 16779 82986 1 40 16779 50103 3 40 16779 46980 7 40 16779 46990 6 40 16779 84676 9 40 16779 50657 1 40 16779 50658 8 40 13232 70120 7 40 16779 90637 1 40 16779 58570 5 40 16779 58571 2 40 16779 69736 1 40 1677992893 9 40 16779 66404 2 40 16779 58771 6 40 1677992937 0 40 16779 58612 2 40 1677958612 2 40 16779 66704 3 40 16779 66207 9 26 26 26 26 50 50 26 26 20 20 20 20 20 26 26 26 20 20 26 26 26 26 26 26 20 20 20 20 20 26 26 20 20 20 20 50 50 50 26 50 50 20 20 50 26 26 26 26 26 26 6 7 6 7 150 151 55 55 55 55 51 52 52 18 40 55 55 13 23 23 49 23 49 12 52 52 52 52 49 49 49 13 13 13 13 148 148 149 143 146 146 25 24 148 25 25 25 24 144 114 ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 203 B Notes 204 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Notes ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 205 Notes 206 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Notes ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 | 2CDC500098C0202 207 Notes 208 2CDC500098C0202 | ABB i-bus® KNX Smart Home and Intelligent Building Control Product Range Overview 2014/2015 Further Information and Local Contacts: www.abb.com/knx Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents - in whole or in parts - is forbidden without prior written consent of ABB AG. Copyright© 2014 ABB All rights reserved Order Number 2CDC500098C0202 printed in Germany (11/14-10-MMM) Contact