FRD12000 series cynergycomponents RF Relay, screened, 8kV, 6A An open frame RF reed relay with 8kV isolation and 6A (at 30MHz) carry current, the FRD12000 series has been used many HF radio system specifcations over the years, with applications in commercial maritime (GMDSS) equipment and military HF radio units worldwide. The use of vacuum reed switches with rhodium contacts offers high isolation voltages, low contact resistance and long operating lifetime. Up to 8kVDC Isolation between Contacts 6A Carry Current (up to 30MHz) Excellent RF Performance Ideal for Antenna Tuning Units Form A/B Contact Confguration Customising Facility Available as Form A (SPNO) or Form B (SPNC) contact confgurations. Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] Contact Units Conditions FRD12014 A Action (form A, B or Latching) A 6 Carry Current A RMS max 1 Switching Current A DC max 20 Switching Power W DC max 20 Switching Voltage V DC max 8 Isolation kV DC max 0.4 Capacitance pF coil/screen gnd 109 Lifetime operations dry switching 50 (15) Contact Resistance mOhms maximum (typical) Insulation Resistance Ohms minimum (typical) 1010 (1013) 100 ESR at 4.5A, 30MHz mOhms typical COIL at 20°C 12 Nominal Working Voltage VDC 8 Must Operate VDC max 2 Must Release VDC min 340 Nominal Resistance ohms +/10% Part RF Screening 2&5 RF Screening Connection pin position 1&6 Coil Connections pin position RELAY Operate time 3 ms (including bounce) 1 Release time ms Isolation contact to all 10 kV DC max other terminals 0.5 Isolation coil to screen kV DC max Capacitance contact to 2.0 pF contacts open all other terms ENVIRONMENTAL Storage temperature range °C Operating temperature range °C Limited current* Shock g 11ms 1/2 sine pk Bump g 6ms 1/2 sine pk Vibration g 10- 500Hz Weight gm 24 * see graphical data. FRD12015 A 6 1 20 20 8 0.4 109 50 (15) 1010 (1013) 100 FRD12021 B 6 1 20 20 8 0.6 109 50 (15) 1010 (1013) 150 FRD12049 B 6 1 20 20 8 0.6 109 50 (15) 1010 (1013) 150 24 15 2 1000 Part 2&5 1&6 12 8 2 380 - 24 14 4 1500 - 1&6 1&6 2 3 3 1 2 2 10 10 10 0.5 N/A N/A 2.0 2.5 2.5 -55 to +125 -40 to +85 100 40 10 24 33 33 Please refer to this document for circuit design notes:http://www.cynergy3.com/blog/application-notes-reed-relays-0 ISO 9001 C E R T I F IED www.cynergy3.com © 2016 Cynergy3 components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. FRD12000 2016 FRD12000 series cynergycomponents screened 8kV, 6A FRD12000 Series (no screen) 8 Max Current vs Frequency 8 7 7 6 6 5 5 Current (A) Current (A) FRD12000 Series (part screen) Max Current vs Frequency 4 3 2 20°C 3 2 65°C 1 4 20°C 65°C 1 85°C 0 85°C 0 0 5 10 15 20 25 0 30 5 10 15 20 25 30 Frequency (MHz) Frequency (MHz) Please refer to this document for circuit design notes:http://www.cynergy3.com/blog/application-notes-reed-relays-0 Mechanical Dimensions All dimensions are in millimeters (inches) 63.50 max (2.50") 29.00 max (1.14") 20.00 max (0.76") 5.0 (0.195") 4 Pins 0.60 dia. 20.00 max (0.79") +ve on Form B types 38.10 (1.50") (0.024")Nom FORM B FORM A 5 6 1 2 + 15.24 51.10 max (0.60") (2.01") Underside view 1 2 cynergy 3 3 5 4 6 Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO 9001 C E R T I F IED © 2016 Cynergy3 components, All Rights Reserved. www.cynergy3.com Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.