Green C Band/L Band Micro-Optic WDM MWDMGCL Series Product Description Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thin-film filter technology and patented athermal platform for optical device. The MWDM 6470/7064 is used to combine (or separate) conventional band (1530 1560 nm) with (or from) the longer wavelength band (1574 - 1610 nm) signals. is device has very flat and wide passband, low insertion loss, and high isolation making this the ideal device for high-power Optical Amplification Systems and DWDM Network applications. The MWDM is used in high-power applications in DWDM systems. Oplink MWDM devices are Bellcore GR-1221 qualification tested and complied with industry green initiatives such as Rohs and WEEE. All Oplink products are epoxy-free in the optical path. Performance Specificationns MWDMGCL Series Min Pass Channel Wavelength Range λ1 Reflection Channel Wavelength Range λ2 Type 7064 Typical 1570 Max Unit 1610 nm Features Environmental Green Plan Compliance Type 6470 1500 1564 nm Type 7064 1500 1564 nm Wide Operating Wavelength Range Type 6470 1570 1610 nm Low Insertion Loss 0.7 0.5 dB Insertion Loss * Pass Channel @ λ1 Reflect Channel @ λ2 Isolation Reflect Channel @ λ1 Pass Channel @ λ2 12 25 dB Passband Ripple 0.30 dB Directivity 50 dB Return Loss 50 dB High Channel Isolation Ultra Flat Wide Passband Highly Stable & Reliable Epoxy-free Optical Path Polarization Dependent Loss 0.1 dB Applications Polarization Mode Dispersion 0.05 ps Fiberoptic Amplifiers Maximum Power Handling 500 mW Fiber Type Corning SMF-28 Operating Temperature Storage Temperature Package Dimensions ** 250 μm Bare Fiber 900 μm Loose Tube 0 to +70 °C -40 to +85 °C P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 mm System Monitoring Fiberoptic Instruments Laboratory R&D Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. *** The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. S0031 - R03.20100330 Green C Band/L Band Micro-Optic WDM MWDMGCL Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: 250 µm bare fiber 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com P2: 900 µm loose tube Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG 0 Wavelength 1564 nm pass/1570 nm ref = 6470 1570 nm pass/1564 nm ref = 7064 0 Fiber Length* 0.5 meter = H 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 Package & Fiber Jacket P1 + 250 μm bare fiber = 11 P2 + 900 μm loose tube = 22 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. S0031 - R03.20100330 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules