DG2706 Vishay Siliconix High Speed, Low Voltage, 3 , Quad SPDT CMOS Analog Switch DESCRIPTION FEATURES The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a 1.65 V to 4.3 V single power supply and achieves 3 switch On-resistance. When turned on, each switch conducts equally in both directions. Its switch on resistance flatness is 0.6 and channel to channel matching is of 0.3 when powered with single 3.15 V supply. All channels guaranteed break before make switching. Control logic input has 0.5 V to 1.65 V logic threshold. It features a 190 MHz - 3 dB bandwidth, - 90 dB crosstalk and - 70 dB off-isolation at 1 MHz. The DG2706 is an ideal fit for low voltage battery powered devices switching audio, video, multi-media data streams, and control signals between different functional circuits or ports. • • • • • • Operation voltage range: 1.65 V to 4.3 V Guaranteed On-resistance: 3.0 at 3.15 V Low voltage logic threshold Low crosstalk: - 70 dB High off-isolation: - 90 dB Ultra small package: miniQFN16 of 1.8 mm x 2.6 mm APPLICATIONS • • • • • Dual SIM card switch A/V and analog signal routing Battery operated devices Data acquisition systems Communications systems • Medical and ATE equipments The DG2707 comes in a small miniQFN-16 lead package (1.8 mm x 2.6 mm x 0.75 mm). As a committed partner to community and the environment, Vishay Siliconix manufactures this product with the lead(Pb)-free device terminations and is 100 % RoHS compliant. FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION COM4 13 NC4 14 NO1 COM1 GND IN1 NC3 12 11 10 9 8 COM3 7 NO3 15 6 NC2 16 5 COM2 1 2 3 4 V+ IN2 NO2 VXX NC1 Pin 1: LONG LEAD NO4 miniQFN-16L Top View Device Marking: VXX Traceability Code: V is DG2706DN XX = Date/Lot ORDERING INFORMATION Temp. Range Package Part Number - 40 °C to 85 °C miniQFN-16 DG2706DN-T1-E4 Document Number: 68392 S11-0176-Rev. B, 07-Feb-11 www.vishay.com 1 DG2706 Vishay Siliconix TRUTH TABLE DG2706 QUAD SPDT, miniQFN-16L Select Input On Switches IN1 (Pin 10) IN2 (Pin 3) Description (Pin) 0 X NC1 (Pin 1) 1 X NO1 (Pin 15) 0 X NC4 (Pin 14) 1 X NO4 (Pin 12) 0 NC2 (Pin 6) 1 NO2 (Pin 4) 0 NC3 (Pin 9) 1 NO3 (Pin 7) X X Common (Pin) COM1 (Pin 16) COM4 (Pin 13) COM2 (Pin 5) COM3 (Pin 3) ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) Parameter Reference to GND Limit V+ IN, COM, NC, NOa Current (Any terminal except NO, NC or COM) - 0.3 to 5.0 - 0.3 to (V+ + 0.3) Unit V 30 Continuous Current (NO, NC, or COM) ± 250 Peak Current (Pulsed at 1 ms, 10 % Duty Cycle) ± 500 Storage Temperature (D Suffix) mA - 65 to 150 °C Thermal Resistance (Package)b miniQFN-16 152 °C/W Power Dissipation (Package)b miniQFN-16c, d 525 mW Notes: a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 6.6 mW/°C above 70 °C d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. www.vishay.com 2 Document Number: 68392 S11-0176-Rev. B, 07-Feb-11 DG2706 Vishay Siliconix SPECIFICATIONS (V+ = 3.15 V) Parameter Symbol Test Conditions Otherwise Unless Specified VANALOG RDS(on) Limits - 40 °C to 85 °C Temp.b Min.d Full 0 Typ.c Max.d Unit V+ V 3 5.5 Analog Switch Analog Signal Rangee Room On-Resistance RDS(on) V+ = 3.15 V, INO/NC = 10 mA, VCOM = 1.0 V RON Match R(ON) V+ = 3.15 V, INO/NC = 10 mA, VCOM = 1.0 V Room RON V+ = 3.15 V, INO/NC = 10 mA, Room RON Resistance Flatness Channel Off Leakage Current INO/NC(off) ICOM(off) Channel-On Leakage Current ICOM(on) V+ = 3.6 V, VNO/NC = 0.5 V/3 V, VCOM = 3 V/0.5 V V+ = 3.6 V, VNO/NC, VCOM = 3 V/0.5 V Full 6 0.3 0.6 Room -5 5 Full - 10 10 Room -5 5 Full - 10 10 Room - 10 10 Full - 20 20 1.65 nA Digital Control Input High Voltage VINH Full Input Low Voltage VINL Full Input Current IINL or IINH VIN = 0 or V+ Full V 0.4 -1 1 µA Dynamic Characteristics Break-Before-Make Time Enable Turn-On Time tON(EN) Enable Turn-Off Time tOFF(EN) Charge Injectiond Off-Isolation d Crosstalkd, f Room tBBM QINJ OIRR XTALK Full VNO, VNC = 1.5 V, RL = 50 , CL = 35 pF 1 5 Room 20 Full 15 Full V+ = 3.15 V, f = 1 MHz, RL = 50 , CL = 5 pF ns 55 Room CL = 1 nF, RGEN = 0 , VNC/NO = 2 V 45 35 45 Room 3 Room - 70 Room - 90 pC dB Bandwidthd BW V+ = 3.15 V, RL = 50 , CL = 5 pF, - 3 dB Room 190 MHz Total Harmonic Distortiond THD V+ = 3.15 V, RLOAD = 600 Room 0.02 % NO, NC Off Capacitanced Channel-On Capacitanced CSNC(off) CSNO(on) 16 V+ = 3.15 V, f = 1 MHz Room 15 CCOM(on) pF 31 Power Supply Power Supply Range V+ Power Supply Current I+ 1.65 VIN = 0 or V+ Full 4.3 V 1 µA Notes: a. Room = 25 °C, Full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, not subjected to production test. e. VIN = input voltage to perform proper function. f. Crosstalk measured between channels. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Document Number: 68392 S11-0176-Rev. B, 07-Feb-11 www.vishay.com 3 DG2706 Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 40 26 T = 25 °C ION = 10 mA COM 24 35 V+ = 1.65 V, ION = 10 mA 20 R ON - On-Resistance (Ω) R ON - On-Resistance (Ω) 22 18 16 V+ = 1.65 V 14 12 10 8 6 V+ = 3.15 V 30 + 85 °C 25 + 25 °C 20 - 40 °C 15 10 5 V+ = 3.6 V 4 0 2 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 4.0 0.5 1.0 1.5 V D - Analog Voltage (V) RON vs. VD and Single Supply Voltage RON vs. Analog Voltage and Temperature 5 10 DG2706 RL = 600 Ω VSignal = 1 VRMS V+ = 3.15 V, ION = 10 mA 1 4 + 85 °C V+ = 1.65 V THD (%) R ON - On-Resistance (Ω) 2.0 VD - Analog Voltage (V) + 25 °C 3 0.1 V+ = 3.15 V - 40 °C 0.01 2 V+ = 3.6 V 0 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 10 100 1000 VD - Analog Voltage (V) RON vs. Analog Voltage and Temperature 100000 Switching Threshold vs. Supply Voltage 10 mA 5 V+ = 3.6 V, ION = 10 mA 1 mA 4 + 85 °C 3 + 25 °C - 40 °C 2 I+ - Supply Current (A) R ON - On-Resistance (Ω) 10000 Frequency (Hz) 100 µA 10 µA 1 µA V+ = 3.6 V 100 nA V+ = 3.15 V V+ = 1.65 V 10 nA 1 nA 100 pA 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VD - Analog Voltage (V) RON vs. Analog Voltage and Temperature www.vishay.com 4 4.0 10 100 1K 10K 100K 1M 10M Input Switching Frequency (Hz) Supply Current vs. Input Switching Frequency Document Number: 68392 S11-0176-Rev. B, 07-Feb-11 DG2706 Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 1000 10 Loss V+ = 3.15 V 0 Loss, OIRR, X TALK (dB) Leakage Currrent (pA) - 10 INO/NC(off) 100 ICOM(on) 10 ICOM(off) - 20 V+ = 3.15 V RL = 50 Ω - 30 - 40 OIRR - 50 XTALK - 60 - 70 - 80 - 90 1 - 60 - 40 - 20 0 20 40 60 80 - 100 100K 100 120 140 1M Temperature (°C) 10M Frequency (Hz) 100M 1G Insertion Loss, Off-Isolation Crosstalk vs. Frequency Leakage Current vs. Temperature 1.5 VT - Switching Threshold (V) 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 V+ - Supply Voltage (V) Switching Threshold vs. Supply Voltage Document Number: 68392 S11-0176-Rev. B, 07-Feb-11 www.vishay.com 5 DG2706 Vishay Siliconix TEST CIRCUITS V+ VINH Logic Input V+ NO or NC Switch Input VINL Switch Output COM tr < 5 ns tf < 5 ns 50 % VOUT 0.9 x V OUT Logic Input IN RL 50 Ω GND Switch Output CL 35 pF 0V tOFF tON 0V Logic "1" = Switch on Logic input waveforms inverted for switches that have the opposite logic sense. CL (includes fixture and stray capacitance) VOUT = VCOM (R L RL + R ON ) Figure 1. Switching Time V+ Logic Input V+ COM NO VNO VINH tr < 5 ns tf < 5 ns VINL VO NC VNC RL 50 Ω IN CL 35 pF GND VNC = V NO VO 90 % Switch 0V Output tD tD CL (includes fixture and stray capacitance) Figure 2. Break-Before-Make Interval V+ Rgen Δ VOUT V+ COM NC or NO VOUT VOUT + IN IN Vgen CL = 1 nF VIN = 0 - V+ On Off On GND Q = ΔVOUT x CL IN depends on switch configuration: input polarity determined by sense of switch. Figure 3. Charge Injection www.vishay.com 6 Document Number: 68392 S11-0176-Rev. B, 07-Feb-11 DG2706 Vishay Siliconix TEST CIRCUITS V+ V+ 10 nF 10 nF V+ V+ NC or NO IN COM COM 0 V, 2.4 V Meter COM IN 0 V, 2.4 V RL NC or NO GND HP4192A Impedance Analyzer or Equivalent GND Analyzer f = 1 MHz VCOM Off Isolation = 20 log V NO / NC Figure 4. Off-Isolation Figure 5. Channel Off/On Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?68392. Document Number: 68392 S11-0176-Rev. B, 07-Feb-11 www.vishay.com 7 Package Information www.vishay.com Vishay Siliconix miniQFN-16L (1) (2) (4) (3) L1 (12) (11) (10) (9) (5) (16) L D (8) (14) (7) (15) (6) (16) (5) (15) (6) (14) (7) (13) (8) E (13) (12) (11) (10) (9) (1) (2) (3) (4) b DIM e A C A1 BACK SIDE VIEW MILLIMETERS INCHES MIN. NAM MAX. MIN. NAM MAX. A 0.70 0.75 0.80 0.0275 0.0295 0.0315 A1 0 - 0.05 0 - 0.002 b 0.15 0.20 0.25 0.0059 0.0078 0.0098 C 0.15 0.20 0.25 0.0059 0.0078 0.0098 D 2.50 2.60 2.70 0.0984 0.1023 0.1063 E 1.70 1.80 1.90 0.0669 0.0708 0.0748 e 0.40 BSC 0.0157 BSC L 0.35 0.40 0.45 0.0137 0.0157 0.0177 L1 0.45 0.50 0.55 0.0177 0.0196 0.0216 ECN T16-0234-Rev. B, 09-May-16 DWG: 5954 Revision: 09-May-16 1 Document Number: 74323 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAD Pattern Vishay Siliconix RECOMMENDED MINIMUM PADS FOR MINI QFN 16L 0.562 (0.0221) 0.400 (0.0157) 0.225 (0.0089) 1 2.900 (0.1142) 0.463 (0.0182) 1.200 (0.0472) 2.100 (0.0827) Mounting Footprint Dimensions in mm (inch) Document Number: 66557 Revision: 05-Mar-10 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000