Single Window Single Mode Wideband Fiber Coupler (1x3) SWFC1x3 Series Product Description Oplink’s single window, single mode wideband fiber couplers are highly stable for multi-port optical signal splitting. They have very good uniformity, low excess loss and very low polarization sensitivity. All devices are tested according to industry standard test procedures and are supplied with all pertinent measurement data. Oplink can provide customized designs to meet specialized feature applications. Also, Oplink offers modular assemblies that integrate other components to form a full function module or subsystem. L Port 1 Comm Port 2 Ø Port 3 Performance Specificationns SWFC53/33 Series (1x3) Features Premium Configuration Grade A Unit Ultra Low Polarization Sensitivity 1x3 Operating Wavelength Range 1310nm 1290~1330 C Band 1528~1565 L Band 1570~1610 Insertion Loss [1] [2] < 5.5 Wavelength Independent nm < 5.8 dB Uniformity < 0.9 < 1.3 dB Polarization Dependent Loss < 0.20 < 0.25 dB Temperature Dependent Loss < 0.15 < 0.20 dB Directivity > 55 dB Maximum Power Handling 500 mW Operating Temperature Range - 5 to + 70 °C Storage Temperature Range - 40 to + 85 °C Fiber Type Package Dimensions Single Fusion Compact Package Highly Stable & Reliable Applications CATV Local Area Networks Subscriber Loops Telecommunications Corning SMF-28e+ or equivalent P1: 250µm bare fiber P2: 900µm loose tube P3: 3mm cable (Ø) 3.0 x (L) 47.0 (Ø) 3.6 x (L) 65.0 (L) 96.0 x (W) 17.0 x (H) 6.4 mm Note: [1] Values are referenced without connector loss. [2] Insertion loss over operating wavelength range at ~23°C (excluding PDL and TDL). S0169 - R13. (web) 20150331 Single Window Single Mode Wideband Fiber Coupler (1x3) SWFC1x3 Series Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. SWFC Wavelength 1310nm = 3 C band = 5 L band = 6 3 Type 1x3 = 3 3 3 Split Ratio 33/33/33 = 33 0 Grade 0 Premium Grade = P A Grade = A Fiber Length* 0.5 meter = H 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com Package & Fiber Type Jacket P1 + 250µm bare fiber = 11 P2 + 900µm loose tube = 22 P3 + 3 mm cable = 33 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC/PC = 9 MU = A LC/APC = B Notes : * The tolerance of fiber length is +/-0.1m. (For connector option only, for without connector, just keep the length as minimum) * 1 meter is standard. The lead time for special fiber length will be longer. S0169 - R13. (web) 20150331 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Interconnect Transmission HFC/RoF Subsystem