Single Window Single Mode Wideband Fiber Coupler (980, 1310, S, C, L, and C+L band) SWFC Series Product Description The Oplink fused single window wideband fiber 1x2 (2x2) couplers provide accurate optical signal coupling and splitting over wide bandwidth with high performance and high reliability. These couplers have excellent uniformity, low excess loss and very low polarization sensitivity and are available with various tap ratios, wavelength ranges, fiber types, and connector options. All devices are shown to be able to handle high optical power up to 4W and are tested according to industry standard procedures. Reliability is guaranteed through stringent tests to fully meet Telcordia GR-1221 requirements. Port 4 (terminated for 1x2 configuration) Port 2 Main (High%) L Port 1 In Ø Port 3 Tap (Low%) Performance Specificationns Features SWFC Series 980 nm 1310 nm S Band C Band L Band C+L Band Unit Wavelength Range 970 ~ 990 1270 ~ 1350 1420 ~ 1500 1530 ~ 1565 1570 ~ 1605 1530 ~ 1610 nm Fiber Type Corning HI980 Corning HI1060 OFS BF05635-02 Guranteed Reliability Corning SMF-28 See Insertion Loss Table I, II, III dB 55 dB Directivity (Min) 55 dB Signal Path: <0.1dB, Tap Path: <0.15 dB dB 4 W Operating Temperature Range [3] - 40 to + 75 °C Storage Temperature Range - 40 to + 85 °C TDL [2] (Max) Maximum Power Handling Package Dimensions ** P1: 250 µm bare fiber P2: 900 µm loose tube P3: 3mm cable (Ø) 3.0 x (L) 47.0 (Ø) 3.0 x (L) 60.0 (L) 96.0 x (W) 12.0 x (H) 6.4 Low Insertion Loss and PDL High Power Handling Return Loss (Min) Insertion Loss [1] Wavelength Independent Applications Signal monitoring in EDFA Network Monitoring CATV Local Area Networks Testing Instruments Laboratory R&D mm Note: [1] Values are referenced without connector loss. [2] Temperature Sensitivity Coefficient ~0.002dB/°C at the range of –5 to 75°C. [3] Operating temperature range changes to -5 to 75°C in P2, P3 package and all package with connectors [4] The mechanical tolerance should be +/- 0.2 mm on all package dimensions unless otherwise custom specified. S0070 - R08. 20111017 Single Window Single Mode Wideband Fiber Coupler (980, 1310, S, C, L, and C+L band) SWFC Series Insertion Loss Tables Insertion Loss (IL) I : C or L band coupler P Grade IL1 (dB) Coupling Ratio WDL2 (dB) WDL2 (dB) PDL3 (dB) Signal Tap Tap Signal Tap Signal Tap Signal Tap ≤0.20 19.0-21.0 ≤0.08 ≤0.50 ≤0.04 ≤0.12 ≤0.20 17.7-21.5 ≤0.10 ≤0.55 ≤0.05 ≤0.15 98/2 ≤0.25 16.4-18.4 ≤0.10 ≤0.40 ≤0.04 ≤0.12 ≤0.30 16.0-19.4 ≤0.10 ≤0.45 ≤0.05 ≤0.15 97/3 ≤0.30 14.6-16.2 ≤0.10 ≤0.30 ≤0.04 ≤0.12 ≤0.35 14.0-16.8 ≤0.10 ≤0.40 ≤0.05 ≤0.15 95/5 ≤0.35 12.4-13.8 ≤0.12 ≤0.25 ≤0.04 ≤0.10 ≤0.40 12.0-14.4 ≤0.12 ≤0.30 ≤0.05 ≤0.15 90/10 ≤0.60 9.60-10.8 ≤0.12 ≤0.22 ≤0.05 ≤0.10 ≤0.65 9.20-11.2 ≤0.13 ≤0.26 ≤0.06 ≤0.14 85/15 ≤0.85 7.80-8.80 ≤0.15 ≤0.20 ≤0.05 ≤0.10 ≤0.90 7.5-9.0 ≤0.15 ≤0.25 ≤0.06 ≤0.14 80/20 ≤1.15 6.60-7.60 ≤0.15 ≤0.20 ≤0.05 ≤0.10 ≤1.15 6.4-8.0 ≤0.16 ≤0.23 ≤0.07 ≤0.13 75/25 ≤1.35 5.75-6.50 ≤0.15 ≤0.20 ≤0.06 ≤0.10 ≤1.44 5.6-6.7 ≤0.16 ≤0.22 ≤0.07 ≤0.13 70/30 ≤1.75 5.00-5.50 ≤0.15 ≤0.20 ≤0.06 ≤0.10 ≤1.82 4.9-5.8 ≤0.16 ≤0.20 ≤0.08 ≤0.12 65/35 ≤2.10 4.40-4.90 ≤0.15 ≤0.20 ≤0.07 ≤0.10 ≤2.15 4.3-5.0 ≤0.16 ≤0.20 ≤0.08 ≤0.12 60/40 ≤2.50 3.95-4.30 ≤0.15 ≤0.20 ≤0.07 ≤0.09 ≤2.60 3.7-4.6 ≤0.17 ≤0.20 ≤0.08 ≤0.10 55/45 ≤2.85 3.35-3.80 ≤0.15 ≤0.20 ≤0.07 ≤0.09 ≤2.90 3.1-4.0 ≤0.17 ≤0.20 ≤0.09 ≤0.10 ≤0.20 ≤0.08 2.80-3.30 Signal IL1 (dB) 99/1 50/50 Signal Tap A Grade PDL3 (dB) 2.70-3.30 ≤0.22 ≤0.10 1. Insertion loss over operating wavelength range at ~23°C (excluding PDL and TDL). 2. Insertion loss change over the specified wavelength range. 3. Insertion loss change over the all input polarization states Insertion Loss (IL) II : 1310nm, S2 or C+L band coupler P Grade IL (dB) WDL (dB) 1 Coupling Ratio Signal 2 Tap Signal Tap A Grade PDL (dB) 3 Signal Tap IL (dB) WDL2 (dB) 1 Signal Tap Signal Tap PDL3 (dB) Signal Tap 99/1 ≤0.20 18.2-21.0 ≤0.09 ≤0.90 ≤0.04 ≤0.15 ≤0.23 17.4-21.5 ≤0.10 ≤1.20 ≤0.05 ≤0.20 98/2 ≤0.25 16.0-18.6 ≤0.09 ≤0.80 ≤0.04 ≤0.12 ≤0.30 15.2-19.8 ≤0.11 ≤1.00 ≤0.05 ≤0.15 97/3 ≤0.30 14.4-16.4 ≤0.10 ≤0.70 ≤0.04 ≤0.12 ≤0.34 13.7-17.1 ≤0.12 ≤0.90 ≤0.05 ≤0.15 95/5 ≤0.40 12.2-14.0 ≤0.13 ≤0.60 ≤0.04 ≤0.10 ≤0.40 11.8-14.7 ≤0.15 ≤0.80 ≤0.05 ≤0.15 90/10 ≤0.65 9.40-11.0 ≤0.15 ≤0.50 ≤0.05 ≤0.10 ≤0.65 9.00-11.3 ≤0.16 ≤0.60 ≤0.06 ≤0.15 85/15 ≤0.95 7.70-8.85 ≤0.15 ≤0.45 ≤0.05 ≤0.10 ≤0.85 7.4-9.1 ≤0.18 ≤0.67 ≤0.06 ≤0.15 80/20 ≤1.20 6.30-7.80 ≤0.17 ≤0.40 ≤0.05 ≤0.10 ≤1.15 6.0-8.1 ≤0.20 ≤0.55 ≤0.07 ≤0.14 75/25 ≤1.60 5.45-6.70 ≤0.18 ≤0.40 ≤0.06 ≤0.10 ≤1.44 5.4-6.8 ≤0.20 ≤0.53 ≤0.07 ≤0.14 70/30 ≤1.80 4.60-5.75 ≤0.22 ≤0.40 ≤0.06 ≤0.10 ≤1.82 4.6-5.9 ≤0.25 ≤0.50 ≤0.08 ≤0.13 65/35 ≤2.10 4.10-5.05 ≤0.23 ≤0.38 ≤0.07 ≤0.10 ≤2.15 4.2-5.0 ≤0.30 ≤0.50 ≤0.08 ≤0.13 60/40 ≤2.55 3.85-4.40 ≤0.25 ≤0.35 ≤0.07 ≤0.09 ≤2.60 3.7-4.6 ≤0.35 ≤0.48 ≤0.09 ≤0.11 55/45 ≤2.90 3.15-3.85 ≤0.30 ≤0.35 ≤0.07 ≤0.09 ≤2.81 3.1-4.0 ≤0.40 ≤0.48 ≤0.09 ≤0.11 50/50 2.70-3.40 ≤0.35 ≤0.08 2.60-3.50 ≤0.40 ≤0.10 1. Insertion loss over operating wavelength range at ~23°C (excluding PDL and TDL). For S-band product, add 0.1dB due to water absorption peak of fiber. 2. Insertion loss change over the specified wavelength range. For S-band product, add 0.1dB in WDL due to water absorption peak of fiber. 3. Insertion loss change over the all input polarization states. Oplink Communications, Inc Single Window Single Mode Wideband Fiber Coupler (980, 1310, S, C, L, and C+L band) SWFC Series Insertion Loss (IL) III : 980nm coupler P Grade Coupling Ratio A Grade WDL2 (dB) Tap Signal IL1 (dB) WDL2 (dB) PDL3 (dB) Signal Tap Tap Signal Tap Signal Tap ≤0.20 18.5-21.0 ≤0.10 ≤1.00 ≤0.05 ≤0.12 ≤0.25 15.5-21.5 ≤0.15 ≤1.20 ≤0.07 ≤0.15 98/2 ≤0.27 15.7-18.9 ≤0.15 ≤1.00 ≤0.05 ≤0.12 ≤0.32 14.8-19.8 ≤0.20 ≤1.15 ≤0.07 ≤0.15 97/3 ≤0.33 13.9-16.9 ≤0.17 ≤1.00 ≤0.05 ≤0.12 ≤0.37 13.2-17.7 ≤0.22 ≤1.15 ≤0.07 ≤0.15 95/5 ≤0.38 11.4-14.8 ≤0.20 ≤0.90 ≤0.05 ≤0.12 ≤0.50 11.2-15.2 ≤0.25 ≤1.10 ≤0.07 ≤0.15 90/10 ≤0.60 9.20-11.3 ≤0.25 ≤0.70 ≤0.07 ≤0.12 ≤0.70 8.70-11.7 ≤0.35 ≤0.75 ≤0.10 ≤0.15 85/15 ≤1.00 7.40-9.00 ≤0.25 ≤0.65 ≤0.10 ≤0.12 ≤1.20 7.00-9.60 ≤0.35 ≤0.75 ≤0.10 ≤0.15 80/20 ≤1.30 5.70-7.90 ≤0.25 ≤0.60 ≤0.10 ≤0.12 ≤1.50 5.40-8.50 ≤0.35 ≤0.75 ≤0.10 ≤0.15 75/25 ≤1.65 5.10-6.80 ≤0.30 ≤0.55 ≤0.10 ≤0.10 ≤1.85 4.80-7.30 ≤0.40 ≤0.70 ≤0.10 ≤0.15 70/30 ≤1.90 4.30-6.00 ≤0.35 ≤0.50 ≤0.10 ≤0.10 ≤2.20 4.20-6.40 ≤0.45 ≤0.65 ≤0.10 ≤0.15 65/35 ≤2.10 3.75-5.35 ≤0.35 ≤0.45 ≤0.10 ≤0.10 ≤2.40 3.50-5.60 ≤0.45 ≤0.60 ≤0.10 ≤0.15 60/40 ≤2.60 3.40-4.70 ≤0.35 ≤0.40 ≤0.10 ≤0.10 ≤2.80 3.20-4.70 ≤0.45 ≤0.55 ≤0.10 ≤0.15 55/45 ≤2.90 2.85-4.10 ≤0.35 ≤0.35 ≤0.10 ≤0.10 ≤2.95 3.05-4.25 ≤0.45 ≤0.50 ≤0.10 ≤0.15 ≤0.30 ≤0.10 2.70-3.40 Signal PDL3 (dB) 99/1 50/50 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com IL1 (dB) 2.60-3.60 ≤0.45 Signal Tap ≤0.15 1. Insertion loss over operating wavelength range at ~23°C (excluding PDL and TDL). 2. Insertion loss change over the specified wavelength range. 3. Insertion loss change over the all input polarization states. Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. SWFC 0 Wavelength 980 nm = 9 1310 nm = 3 C band = 5 S band = 4 L band = 6 C+L band = 1 Type Tap Ratio 1x2 = 1 2x2 = 2 50/50 = 50 45/55 = 45 40/60 = 40 35/65 = 35 30/70 = 30 25/75 = 25 20/80 = 20 15/85 = 15 10/90 = 10 5/95 = 05 3/97 = 03 2/98 = 02 1/99 = 01 Grade 0 Premium Grade = P A Grade = A Fiber Length** 0.5 Meter = H 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Package & Fiber Type P1 + Corning SMF-28 = 11 P2 + SMF-28 in 900 µm loose tube = 22 P3 + SMF-28 in 3 mm cable = 33 P1 + Corning HI1060 = 16 P1 + Corning HI980 = 19 P1 + OFS BF05635-02 = 17 P2 + Corning HI1060 = 26 P2 + Corning HI980 = 29 P2 + OFS BF05635-02 = 27 P3 + Corning HI1060 = 36 P3 + Corning HI980 = 39 P3 + OFS BF05635-02 = 37 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC/UPC = 9 MU = A LC/APC = B Notes : * For HI1060, HI980 and OFS BF05635-02 fiber type, the Connector Option is None. ** The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead time for special fiber length will be longer. S0070 - R08. 20111017 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules