New High rate discharge & high temperature type Old ( HHR330APH) BK330APH PH type LFat/A size ■ Dimensions (with tube) ■ Typical charge characteristics ø 18.2 -+00.7 2.0 (+) 1.8 Voltage (V) Charge : 320 mA(0.1 lt) × 16 hrs. 1.6 1.4 1.2 -10 ℃ 20 ℃ 60 ℃ 1.0 +0 67.5 -1.5 0.8 0 2 4 6 8 10 12 Charge time (hours) 14 16 18 20 120 110 Unit: mm ■ Specifications Diameter Height Approximate Weight 18.2 +0 / -0.7 mm 67.5 +0 / -1.5 mm 60 g Nominal Voltage 1.2 V Average *2 Rated (min.) Charge Rapid *3 Low rate Ambient Temperature Standard Charge Rapid Low rate Discharge Storage 80 70 60 40 30 -20 -10 0 10 20 30 40 50 60 70 Temperature (℃) 3,200 mAh 5.5 mΩ 320 mA X 16 hrs. ■ Typical discharge characteristics 1.8 1650 mA X 2.4 hrs. -10 ℃ to 60 ℃ -10 ℃ to 45 ℃ -10 ℃ to 60 ℃ Charge : 1650 mA -dV = 5 mV, 20 ℃ Discharge : 20 ℃ 1.7 165 mA X 32 hrs. 110 mA X 48 hrs. 1.6 10 A 20 A 1.5 1.4 1.3 1.2 1.1 <1 year -20 ℃ to 35 ℃ 1.0 <6 months -20 ℃ to 45 ℃ 0.9 <1 month -20 ℃ to 55 ℃ 0.8 <1 week Charge : 320 mA (0.1 It) ×16 hrs. Charge temperature : -10 to 60 ℃ Discharge : 640 mA(0.2 It) Cut off voltage : 1.0 V Discharge temperature : 20 ℃ 3,300 mAh Approx. Internal impedance at 1000Hz at charged state. Standard 90 50 Voltage (V) *1 Discharge Capacity Capacity raito (%) 100 (- ) 0 5 -20 ℃ to 65 ℃ 10 15 20 25 30 Discharge time (minutes) *1 After charging at 0.1 It for 16 hours, discharging at 0.2 It. *2 For reference only. *3 Need specially designed control system. Please contact Panasonic for details. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge/discharge specs, warning label contents and unit design. *The data in this document are for descriptive purposes only and are not intended to make or imply any guarantee or warranty. Nickel Metal Hydride Battery 2014/03