Plug Type Terminator PTFT Series Product Description Oplink designs single mode plug type terminators. It’s high performance and use to terminate open dark fiber ports. This component can prevent reflection of noise into system. Oplink terminators are available with PC or APC polish for FC and SC type. The operate wavelength range s 1310nm and/or 1550nm. The precise mechanical design supports installation easily and reliable performance. Oplink can also provide customized products to help our customer for better opportunities. Our attenuator complies with industry green initiative such as ROHS. Features Performance Specifications Parameters PC/APC Polish Min. Operating Wavelength Range Return Loss Typical Max 1310 ± 40 nm 1550 ± 40 PC Type APC Type Unit 50 dB 65 Operating Temperature -40 85 °C Storage Temperature -40 85 °C Low return loss Plug type available with FC or SC connection Easy install and maintenance Termination possible without use of index matching gels Applications Termination of dark fiber ports Bi-direction transmission system Analog and CATV transmission system High bit rate telecommunication system S0164 - R01.20110623 Plug Type Terminator PTFT Series Mechanical Drawing / Package Dimensions (dimension in mm) 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com FC Type SC Type Ordering Information 0 PTFT 0 0 0 0 0 Material Wavelength Return Loss Connector Type Metal = M Plastic = P 1310nm = 13 1550nm = 15 1625nm = 16 1310/1550nm = 35 1550/1625nm = 56 1310/1550/1625nm = 36 50dB = C 55dB = D 60dB = E 65dB = F FC/PC = 2 FC/APC = 4 SC/PC = 5 SC/APC = 7 ST/PC = 8 LC/PC = 9 MU/PC = A LC/APC = B S0164 - R01.20110623 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules