01 REVISED PER ER30096 BY APPD DATE XXX DESCRIPTION DRK 01/10/11 NOTES: UNLESS OTHERWISE SPECIFIED 1. INTERFACE COMPLIANT TO SMPTE 304 SPECIFICATION. REV 2. MATERIAL SPECIFICATIONS: CONTACTS: COPPER ALLOY O-RINGS AND STRAIN RELIEF: SILICONE RUBBER ALL PLASTIC PARTS: 20% GLASS FILLED POLYPROPYLENE ALL OTHER METAL PARTS: 303 STAINLESS STEEL PER ASTM A582 3. FINISH SPECIFICATIONS: STAINLESS STEEL PARTS: PASSIVATE CONTACTS: .000100 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQN-290 (RoHS) 4. ELECTRICAL SPECIFICATIONS: LOW VOLTAGE CONTACTS: 42 - 60 VAC, 1 AMP AUX ELECTRICAL CONTACTS: 600 VAC, 10 AMP 5. ENVIRONMENTAL: OPERATING TEMPERATURE RATING: -40°C TO 75°C NON-OPERATING/STORAGE TEMPERTURE RATING: -40°C TO 85°C HUMIDITY: <95 RH (AT 40°C) 1.575 40.01 1.140 28.96 SQ. 6. OPTICAL: WAVELENGTH: 1250nm - 1625nm INSERTION LOSS: 0.3dB TYPICAL, 0.5dB MAX RETURN LOSS: > -45dB, -50dB TYPICAL .906 23.00 SQ. .682 17.33 7. REPLACEMENT KITS: CONTACT KIT: 7760-000-00702Z 8. CABLE PREPARATION AND STRIPPING PROCEDURE: CAP-TBD. 9. RED LDPE DUST CAP INCLUDED (NOT SHOWN) 10. CRIMP TOOLING: FOR FACTORY APPLICATION USE HAND TOOL KTH-1000 AND DIE KTH-2035 FOR FIELD APPLICATION USE HAND TOOL KTH-5000 AND DIE KTH-5018 .905 22.99 11. ELECTRICAL AND OPTICAL CONTACTS INCLUDED .906 23.00 4X .135 3.43 .708 17.98 MARK: KINGS 7763-400-F1101P 5/8" [15.88] ACROSS FLATS .453 11.51 .906 23.00 CATALOG P/N: 7763-400-F1101P +.004 +.10 .00 .913 - .000 23.19 4X +.004 +.10 .00 .126 - .000 3.20 MOUNTING HOLE PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 3:2 CUSTOMER SALES DRAWING DRAWN DRK APPROVED JCF DMF029 B DATE APPROVED 01/10/11 PSM DATE APPROVED 02/01/11 XXX Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 THIRD ANGLE DATE 02/01/11 DATE XX/XX/XX TRI LOCK SMPTE PANEL MOUNT 4 HOLE, JACK A SD7763-400-F1101P SHT 1 OF REV 1 01