MPO/MTP Patchcord MPOM Series Product Description Oplink’s MPO/MTP multi-fiber cabling system is ideally suited for a high density environment that demands space saving and innovative cable management solutions. MPO/MTP supports various connections from multi-fiber to single-fiber out. We also offer various other MPO/MTP products such as MPO/MTP cassettes, modules and enclosures. These cassettes provide secure transition between MPO/MTP and LC or SC connections. With our highly integrated design and manufacturing capability, Oplink can also provide customized products to help customer for better opportunities. Our modules and patchcords are 100% tested at our factory to deliver optimal performance and reliability. Oplink’s MTP/MPO patchcords are Telcordia GR-1435 compliant and also complies with industry green initiative. Features Applications Improves and simplifies fiber routing Decreases fiber management space OEM or customized for special applications Low insertion loss and reflectance High Density Optical System Access Network Telecommunications networks Broadband/CATV networks Data communications networks, including high-bandwidth equipment Product Specifications Parameters Operating Wavelength MPO Insertion Loss Return Loss Min. 1310 1620 Multi-mode 850 1310 Single Mode 0.75 Single Mode Low Loss 0.35 Multi-mode 0.60 Multi -Mode Low Loss 0.50 Single Mode Cable Jacket Color nm dB dB + 70 °C ± 50 mm 1m< L ≤ 3m ± 100 mm 3m< L ≤ 10m ± 200 mm ±2 % Single Mode Fiber SM ITU-T G652 and IEC 60793-2-50 B1.3 SM ITU-T G657A2/B2 and IEC 60793-2-50 B1.6A OM3 ISO/IEC 11801 and IEC 60793-2-10 Ala.2 TIA/EIA-598, “Optical Fiber Cable Color Coding.” Flat Cable/ Round Cable LSZH Yellow Singlemode fibers: G652, G657 Orange Multimode fibers: 50/125µm, 62.5/125µm Aqua Flammability Rating 60 - 20 Fiber Color Cable Jacket Type Unit. L ≤ 1m L > 10m Fiber Type Max. Single Mode Operating Temperature Length Tolerance Typical OM3 50/125; OM4 50/125 IEC-60332-1, IEC-61034, IEC-60754-1 and 2 Note: 1. IL and RL must be tested at room temperature. 2. IL and RL must be tested at 1310nm and 1550nm for single mode, 850nm and 1310nm for multi mode. 3. This spec. for jumper length less than 5 meters. Add 0.03dB for every 10 meter within 850nm and 0.01dB for 1310nm. 4. RL must be tested, but no need to show on the test report. S0234 - R02. (web) 20140101 MPO/MTP Patchcord MPOM Series Mechanical Drawing Bare Fiber Color 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com No. 8 Ribbon Fiber No. 12 Ribbon Fiber No. 1 Blue 2 Orange 3 24 Ribbon Fiber 1 Blue 1/13 Blue 2 Orange 2/14 Orange Green 3 Green 3/15 Green 4 Brown 4 Brown 4/16 Brown 5 Gray 5 Gray 5/17 Gray 6 White 6 White 6/18 White 7 Red 7 Red 7/19 Red 8 Black 8 Black 8/20 Black 9 Yellow 9/21 Yellow 10 Violet 10/22 Violet 11 Pink 11/23 Pink 12 Aqua 12/24 Aqua Cable Jacket Color: SMF: Yellow, MMF OM1/OM2: Orange, MMF OM3/OM4: Aqua Ordering Information MPOM 0 Fiber Count Cable Length B Side MPO Connector B 1 = 8 fiber 2 = 12 fiber 3 = 24 fiber 01 = 1m 02 = 2m . 10 = 10m . . . 99 = 99m M = Male F = Female 0 = None 1 = MTP 2 = MTP Elite 3 = MPO Cable Type B = Bare fiber F = Flat cable R = Round cable A Side MPO Connector A M = Male F = Female 1 = MTP 2 = MTP Elite 3 = MPO Fiber Type Polarity 1 = Single mode 2 = MMF 50/125 3 = MMF 62.5/125 4 = OM3 50/125 5 = OM4 50/125 A = Method A B = Method B Note: Cable length is tip to tip S0234 - R02. (web) 20140101 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Interconnect Transmission HFC/RoF Subsystem