MPOF S0229

MPO/MTP Fan-out Patchcord
MPOF Series
Product Description
Oplink’s MPO/MTP multi-fiber cabling system is ideally suited for a high density
environment that demands space saving and innovative cable management solutions.
MPO/MTP fan-out supports various connections from multi-fiber to single-fiber
out. We also offer various other MPO/MTP products such as MPO/MTP cassettes,
modules and enclosures. These cassettes provide secure transition between MPO/
MTP and LC or SC connections.
With our highly integrated design and manufacturing capability, Oplink can also provide customized products to help customer for better opportunities. Our modules
and patchcords are 100% tested at our factory to deliver optimal performance and
reliability. Oplink’s jumper cable complies with industry green initiative.
Features
Applications
 Improves and simplifies fiber routing
 Optical System Access Network
 Decreases fiber management space
 Telecommunications networks
 OEM or customized for special applications
 Broadband/CATV networks
 Low insertion loss and reflectance
 Data communications networks, including
high-bandwidth equipment
 High Density
 Snap-In cassette panel for easy installation,
removal and expansion
Product Specifications
Parameters
Operating Wavelength
Insertion Loss (MPO/MTP side)
Insertion Loss (Fan-out side)
Min.
Typical
Single Mode
1310 / 1550
Multi-mode
850
Return Loss (Fan-out side)
Operating Temperature
Unit.
nm
Single Mode
0.75
Single Mode Low Loss
0.35
Multi-mode
0.60
Multi-Mode Low Loss
0.50
Single Mode PC
0.20
Single Mode APC
0.30
Multi-mode
Return Loss (MPO/MTP side)
Max.
dB
dB
0.30
Single Mode
60
Single Mode PC
50
Single Mode APC
60
dB
- 20
+ 70
Fiber Type
Follow PN Description
Connector Type
Follow PN Description
°C
S0229 - R03. (web) 20140523
MPO/MTP Fan-out Patchcord
MPOF Series
Length
Length Tolerance
Cable
Follow PN Description
Meter
Fan-out
Follow PN Description
Inch
L ≤ 1m
± 50
mm
1m< L ≤ 3m
± 100
mm
3m< L ≤ 10m
± 200
mm
±2
%
L > 10m
Fan-out Tolerance
Main Cable Jacket Type
Fan-out Jacket Type
± 25
Flat Cable/ Round Cable
mm
LSZH
900 µm
Hytrel 94V0
2.0mm
PVC ( 900 µm:Hytrel 94V0)
Fiber Specification
Parameters
Type
Fiber Type
SM ITU-T G652 and IEC 60793-2-50 B1.3
SM ITU-T G657A2/B2 and IEC 60793-2-50 B1.6A
OM3 ISO/IEC 11801 and IEC 60793-2-10 Ala.2
Fiber Color
TIA/EIA-598, “Optical Fiber Cable Color Coding.”
Main Cable Jacket Color
Yellow
SMF G652 and G657 fiber
Orange
MMF 50/125µm, 62.5/125µm
Aqua
OM3 50/125; OM4 50/125
Follow ribbon fiber colors
Fan-out Jacket Color
Orange
Aqua
Flammability Rating
SMF
MMF 50/125µm, 62.5/125µm
OM3 50/125; OM4 50/125
IEC-60332-1, IEC-61034, IEC-60754-1 and 2
Note:
1)
IL and RL must be tested at room temperature.
2)
IL and RL must be tested at 1310nm and 1550nm for single mode, 850nm for multi mode.
3)
Total IL is MPO IL+ Single Fiber IL.
4)
RL must be tested, but no need to show on the test report.
Oplink Communications, Inc
MPO/MTP Fan-out Patchcord
MPOF Series
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
Mechanical Drawing
Ordering Information
MPOF
Fiber Count
Cable Length
Fan-out Length
1 = 8 fiber
2 = 12 fiber
3 = 24 fiber
01 = 1 m
02 = 2 m
.
10 = 10 m
20 = 20 m
.
.
.
99 = 99 m
01 = 1 inch
02 = 2 inch
.
10 = 10 inch
.
.
.
99 = 99 inch
Cable Type
B = Bare fiber
F = Flat cable
R = Round cable
Fiber Type
1 = Single mode
2 = MMF 50/125
3 = MMF 62.5/125
4 = OM3 50/125
5 = OM4 50/125
Note:
Fiber length is tip to tip
Fan-out
Cable
MPO/MTP
Connector
1 = 900µm
2 = 2.0mm
3 = 250µm
1 = MTP
2 = MTP Elite
3 = MPO
MPO Gender
M = Male
F = Female
Fan-out
Connector
2 = FC/PC
4 = FC/APC
5 = SC/PC
7 = SC/APC
8 = ST
9 = LC/PC
A = MU/PC
B = LC/APC
S0229 - R03. (web) 20140523
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Interconnect  Transmission  HFC/RoF Subsystem