Air to Plate Thermoelectric Assembly ATS PART# ATS-FP-100W-12-C ATS’ air to plate thermoelectric assemblies are heat exchangers for removing heat from a plate attached to its cold side. The plate can be used for mounting electronic components, boards or test specimens used for maintaining a constant temperature. FEATURES & BENEFITS » Compact and lightweight » Simple quick installation » Can be mounted in any orientation » Air to plate heat exchanger » No compressor » Quiet operation » Virtually maintenance free » Uses thermoelectrics SPECIFICATION Max Cooling power TEC Voltage TEC Current Fan Voltage Fan Current 60W @ ∆T = 0° 12 VDC 12 A 12 VDC 0.9A For Illustration Purposes ONLY. APPLICATIONS » Electronics cooling » Medical, Surgical and biological process cooling » Thermal management » Medical equipment » Cold plates » Isothermal plates » Industrial storage and food transportation Product Detail Max Cooling Power TEC Voltage TEC Current Hot Side Fan Cold Side Fan Operating Temperature Dimensions (mm) Weight 60W 12V 14A 120x120x38 mm 12V, 0.9A NA -10° – 70° 220x130x98 3.7 Kgs NOTES: 1. 2. 3. 4. 5. Please use the 12 VDC power with the ripple less than 10% Please do not drop, or TEC can get damaged. Please keep 10cm distance from walls for proper ventilation when mounting. Please do not use it when the temperature of the assembly or environment is higher than 70°C. ∆T = Tplate - Tambient 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 F: 781.769.9979 | WWW.QATS.COM