PRODUCT SPECIFICATION DATE:03/03/2005 cosmo Photolink : NO.60F01005 REV. KPLR1320BD ELECTRONICS CORPORATION SHEET 1 OF 5 FIBER OPTIC Receiver Module Features ● TTL interface compatible. ● 13.2Mbps data rate(NRZ Signal). ● Directly connectable to demodulation IC. ● Supply voltage 3.3V/ 5V equipment. Applications ● Audio equipment . ● Sound card. ● DVD,CD,MD player . ● Set top box. ● Automobile. ● PC,Notebook. Outline Dimensions (Unit:mm) 21.00 1.90 4.00 1.80 6.00 8.20 13.50 4.60 2.10 1 4.60 6.00 Tolerance:±0.2mm 12.00 9.20 4.60 2 9.50 3 11.50 4.60 6.00 1.40 Pin Connection 1.Vout 2.GND 3.Vcc 1 PRODUCT SPECIFICATION DATE:03/03/2005 cosmo Photolink : ELECTRONICS CORPORATION NO.60F01005 REV. KPLR1320BD SHEET 2 OF 5 1 1. Maximum Ratings(Ta=25℃,Vcc=3.3V/5V) Parameter Symbol Rating Unit ℃ Storage Temperature Tstg -40~80 ℃ Operating Temperature Topr -20~70 Supply Voltage Vcc -0.5~7 V Input Voltage VIN -0.5~Vcc+0.5 V ℃ 260(Note 1) Soldering Temperature Tsol Note 1:Soldering time ≦ 10 seconds(At a distance of 1 mm from the package). 2. Recommended Operating Conditions(Ta=25℃,Vcc=3.3V/5V) Parameter Supply Voltage Operating transfer rate Input optical power level Symbol Min Typ. Max Unit VCC T PI 2.7 0.1 -24 3.3 - 5.5 13.2 -14.5 V Mbps dBm 3. Electrical and Optical Characteristics :Receiver(Ta=25℃,Vcc=3.3V/5V) Parameter Symbol Condition (Note Min 2) Typ. Max Unit NRZ Signal Operating transfer rate T 0.1 13.2 Mb/s Operating voltage Vcc 2.7 3.3 5.5 V Optical Input Sensitivity(Note 3) -24 - -14.5 dBm PI Peak Emission Wavelength λp 700 nm Refer to Fig.(1) Dissipation Current Icc 8 15 mA Refer to Fig.(2) 2.4 V High Level Output Voltage VOH Refer to Fig.(2) Low Level Output Voltage VOL 0.4 V Refer to Fig.(2) Rise time tr 10 15 ns Refer to Fig.(2) 10 15 ns Fall time tf Low->High Propagation delay Refer to Fig.(2) 180 ns tPLH time High -> Low Propagation delay Refer to Fig.(2) tPHL 180 ns time Refer to Fig.(2) △tw Pulse Width Distortion -20 20 ns Refer to Fig.(3) △ tj Jitter Time 15 ns Note 2:LED is ON when input signal is high, and OFF when it is low. The duty factor must be maintained between 25 to 75%. Note 3:Measure with a standard optical fiber, peak value. PRODUCT SPECIFICATION DATE:03/03/2005 cosmo Photolink : ELECTRONICS CORPORATION NO.60F01005 REV. KPLR1320BD SHEET 3 OF 5 4. Measuring method (1).Measuring Supply Current Supply Voltage Fiber coupling light output Standard transmitter input signal Standard Transmitter Input test Conditions Vcc=5.0V Pc=-14.5dBm 13.2Mbps NRZ Measuring method DC Average current Standard optical fiber cable Receiver to be measured Vin Vcc Vcc GND Current Meter Vout Icc 0.1uF 0.1uF 5V Input GND 6.6MHz Clock,Duty 50% Vcc (2).Measuring method of Output Voltage and Pulse response Standard Transmitter Vin Vcc Receiver Standard optical fiber cable GND Vcc CH1 CH2 0.1uF Less than 7mm GND Vout 0.1uF Oscilloscope 5V Vcc Input Output signal Input signal 6.6MHz Clock,Duty 50% Input signal (CH1) Input signal (CH1) 50% Output signal (CH2) 50% Output signal (CH2) VOH 90% 50% 50% 10% VOL t PLH t PHL △tw= t PHL - t PLH tr tf 1 PRODUCT SPECIFICATION DATE:03/03/2005 cosmo Photolink : NO.60F01005 REV. KPLR1320BD ELECTRONICS CORPORATION SHEET 4 OF 5 (3).Measuring method of Jitter Standard Transmitter Vin Vcc Receiver Standard optical fiber cable GND Vcc GND Vout Less than 7mm CH1 CH2 0.1uF Less than 7mm 0.1uF Oscilloscope Vcc Vcc Input Output signal Input signal (CH1) 50% Output signal (CH2) 50% △ tj △ tj 5.Recommended PCB Layout 2.54 2.54 6.00 3.90 0 2.1 4.60 9.20 Notes: 1.Unit:mm 2.tolerance:±0.3mm 1 PRODUCT SPECIFICATION DATE:03/03/2005 cosmo Photolink : ELECTRONICS CORPORATION KPLR1320BD NO.60F01005 REV. SHEET 5 OF 5 1 6.Package Information Item Tube Inner Box Outer Box Quantity 50 20 Tube/Box 4 Inner Box/Outer Box 50pcs/Tube 4000pcs/Outer Box Total 50 pcs 1000 pcs 4000 pcs Size(Long*Width*High) 640*24.4*26.4 mm 660*156*122 mm 690*342*284 mm 1000pcs/Inner Box