Common mode Noise Filter Array Common mode Noise Filter Array Type: EXC28CG ■ Features ● ● ● ● ● 2 Common mode noise filters in one package Small size and low-profile(L 2.0 mmW 1.0 mmH 0.5 mm) The 3 GHz or wider signal pass band prevents rounding of transmitted signal waveforms. The TDR value is controlled to 100 (typ.), preventing transmission signal reflection The filter passed the HDMI eye pattern test, and was improved against jitters, phase shifting, and other waveform deformations. ● Reduce the common mode noise and reform the signal wave by high-coupled inductors ● Magnetic shield type ■ Recommended Applications ● HDMI data lines such as TV, STB, DVD, DVC. ● S-ATA data lines such as PCs , HDD. ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 E X C 2 8 C G 9 0 0 U Size Number of Terminals Product Code Noise Filter Code Dimensions(mm) 2 8 Terminals C Type Characteristics Coupled type 2.0 1.0 0.5 (L) (W) (H) ■ Construction Nominal Impedance 12 Form Suffix The first two digits are High speed Code Packing G Differential transmission significant figure of U Embossed Carrier Taping impedance value, and the (for Gbps) third one denotes the number of zeros following ■ Dimensions in mm (not to scale) F D Ferrite C E A B Inner Conductor Dimensions (mm) Type (inches) Electrode A B C D E F EXC28CG 1.00±0.15 2.0±0.2 0.5±0.1 0.20±0.15 0.5±0.1 0.25±0.10 (0804) Mass (Weight) [mg/pc.] 5 ■ Circuit Configuration 8 7 6 5 8 7 6 5 1 2 3 4 1 2 3 4 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Mar. 2010 Common mode Noise Filter Array ■ Ratings Impedance () at 100 MHz Common Mode Differential Mode Part Number Rated Voltage (V DC) Rated Current (mA DC) DC Resistance ()max. EXC28CG240U 24 ±25 % 15 max. 5 160 1.5 EXC28CG900U 90 ±25 % 17 max. 5 130 3.0 ■ Impedance Characteristics (Typical) ● EXC28CG240U ● EXC28CG900U 1000 1000 Impedance () 10000 Impedance () 10000 Common Mode 100 10 Common Mode 100 10 Differential Mode Differential Mode 1 1 1 10 100 1000 10000 1 10 Frequency (MHz) 100 1000 10000 Frequency (MHz) ● Measurement Circuit (A) Common Mode (B) Differential Mode Z ■ Packaging Methods(Taping) and Recommended Land Pattern Design ■ Recommended Soldering Conditions and Safety Precations Z Refer 126 page. Refer 127 page. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2009