ESD Suppressor Array ESD Suppressor Array Type: EZAEGCA ■ Features ● ● ● ● ● ● ■ Recommended Applications ● High-Speed Data Lines (HDMI, IEEE1394) 4 ESD suppressors in one package ESD protection of high-speed data lines Low capacitance (0.25 pF) Good ESD suppression characteristics Good ESD withstanding RoHS compliant ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 & ; " & ( $ " " 7 Product Code ESD Suppressor Code C Size Size (inch) 2012 (0805) 4 Line use Design Specification Code Design Specification A Rated Voltage 15 V Peak Voltage Code Peak Voltage 50 500 V ■ Dimensions in mm (not to scale) 10 9 8 7 1 1.25±0.10 ■ Construction Packaging Methods Packaging Code Punched Carrier Taping V 4 mm Pitch, 5,000 pcs. Special Feature Code Special Feature A Standard 6 Marking Protective coating Alumina substrate 2 (0.5) 3 4 5 0.50±0.10 2.0±0.1 Electrode (Outer) 0.35±0.15 GND Electrode (Outer) 0.30±0.15 0.25±0.15 0.20±0.15 ( ) Reference Mass (Weight) [1000 pcs.] :4 g ■ Circuit Configuration 10 9 8 7 1 6 2 3 4 5 GND terminal : 1, 6 I/O terminal : 2 to 5, 7 to 10 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2012 60 ESD Suppressor Array ■ Ratings Type (inch size) Capacitance(1) Peak Voltage(2) Clamping Voltage(3) Rated Voltage(4) 500 V max. (350 V typ.) 100 V max. 15 V max. EZAEGCA 0.25+0.05/-0.10pF (0805) Rated Current(5) Category Temperature Range 100 mA max. –55 to +125 °C (1) Capacitance = The capacitance value shall be measured under the conditions specified below. Frequency : 1 MHz±10 %, Voltage : 1 Vrms±0.2 Vrms, Temperature : 25 °C±2 °C (2) Peak Voltage = The peak voltage value shall be measured under the following conditions. ESD test conditions : IEC61000-4-2, 8 kV contact discharge (3) Clamping Voltage = The clamping voltage value shall be measured at 30 ns after initiation of pulse and measured under the conditions specified below. ESD test conditions : IEC61000-4-2, 8 kV contact discharge (4) Rated voltage between I/O terminal and GND. (5) Rated current between input terminal and output terminal. ■ Typical Circuits Requiring Protection ■ ESD Suppression Voltage Waveform ● HDMI circuit 400 350 HDMI Controller Volts (V) 300 )%.* 3Y5Y 250 200 150 100 50 0 -50 -20 0 20 40 60 80 100 120 140 160 180 200 Times (nSecs) ■ Recommended Land Pattern Recommended land pattern design for ESD Suppressor Array is shown below. -BOEQBUUFSO bg P d a e Dimensions (mm) c h Dimensions (mm) a b c d 0.75 0.25 1.70 0.35 e h g P 1.85 2.60 0.25 0.50 ■ Packaging Methods, Soldering Conditions and Safety Precautions Please see Data Files Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2012 61