1083

SHD118444
SHD118444PA
SHD118444PB
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1083, REV. A
HERMETIC POWER SCHOTTKY RECTIFIER
200 C Maximum Operation Temperature
DESCRIPTION: A 100 VOLT, 60 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD5/5A/5B PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
100
Volts
IO
60
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(t=8.3ms, Sine Wave) (per leg)
IFSM
570
Amps
MAXIMUM JUNCTION CAPACITANCE (Vr =5V)
CT
1000
pF
7.07
C/W
Top/Tstg
-65 to
+ 175
C
SYMBOL
MAX.
UNITS
Vf
0.84
Volts
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C)
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
R
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 30 Amps) (per leg)
TJ = 25 C
0.68
TJ = 125 C
MAXIMUM REVERSE CURRENT (Ir @ 100 V PIV) (per leg)
TJ = 25 C
TJ = 125 C
Ir
0.75
mA
15
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD118444
SHD118444PA
SHD118444PB
SENSITRON
DATA SHEET 1083, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
.520±.020
(13.2±.508)
.510±.020
(12.9±.508)
.370±.010
(9.40±.254)
.370±.010
(9.40±.254)
.370±.010
(9.40±.254)
2
.125±.010
(3.17±.254)
.030±.010
(.762±.254)
2
.610±.010
(15.5±.254)
.030±.010
(.762±.254)
.030±.010
(.762±.254)
3
.320±.010
(8.13±.254)
.610±.010
(15.5±.254)
.110 (2.80) Max
.090±.010
(2.29±.254)
2
.320±.010
(8.13 ±.254)
.610±.010
(15.5±.254)
3
3
Alumina Ring
.110 (2.79) Max
Terminal 1
.020±.005 R
(.508±.127 )
Moly Lid
Copper Terminals
.130 (3.30) Max
Moly Lid
Alumina Ring
.020±.005 R
(.508±.127 )
Alumina Ring
.020±.002
(.508±.051)
Moly Base
Terminal 1
SHD-5
Moly Base
Terminal 1
.060±.010
(1.52±.254)
SHD-5A
PINOUT TABLE
DEVICE TYPE
DUAL RECTIFIER, COMMON CATHODE (P)
SHD-5B
PIN 1
COMMON CATHODE
Typical Forward Characteristics
.015±.002
(.381±.051)
.060±.010
(1.52±.254)
PIN 2
ANODE
PIN 3
ANODE
Typical Reverse Characteristics
102
200 °C
101
Instantaneous Reverse Current - I R (mA)
175 °C
200 °C
Instantaneous Forward Current - I F (A)
101
175 °C
100
150 °C
0
10
125 °C
10-1
100 °C
75 °C
10-2
50 °C
10-3
25 °C
10-4
125 °C
0
20
40
60
80
Reverse Voltage - RV (V)
100
120
Typical Junction Capacitance
10
10-2
0.1
0.2
0.3
0.4
0.5
0.6
0.7
Forward Voltage Drop -FV(V)
0.8
Junction Capacitance - C T (pF)
25 °C
-1
900
800
700
600
500
400
300
200
100
0
20
40
60
80
Reverse Voltage - RV (V)
100
120
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD118444
SHD118444PA
SHD118444PB
SENSITRON
DATA SHEET 1083, REV. A
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]