SHD118412 SHD118412PA SHD118412PB SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1081, REV. A HERMETIC POWER SCHOTTKY RECTIFIER Very Low Forward Voltage Drop DESCRIPTION: A 45 VOLT, 60 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD5/5A/5B PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 45 Volts IO 60 Amps MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine Wave) (per leg) IFSM 570 Amps MAXIMUM JUNCTION CAPACITANCE (Vr =5V) CT 1600 pF 0.7 C/W Top/Tstg -65 to + 150 C SYMBOL MAX. UNITS Vf 0.56 Volts Ir 3.0 PEAK INVERSE VOLTAGE O MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE R JC ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 30 Amps) (per leg) TJ = 25 C TJ = 125 C 0.51 MAXIMUM REVERSE CURRENT (Ir @ 45V PIV) (per leg) TJ = 25 C TJ = 125 C mA 140 ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD118412 SHD118412PA SHD118412PB SENSITRON DATA SHEET 1081, REV. A MECHANICAL DIMENSIONS: In Inches / mm .370±.010 (9.40±.254) .520±.020 (13.2±.508) .510±.020 (12.9±.508) .370±.010 (9.40±.254) .370±.010 (9.40±.254) 2 .125±.010 (3.17±.254) .030±.010 (.762±.254) 2 2 .610±.010 (15.5±.254) .030±.010 (.762±.254) .030±.010 (.762±.254) 3 .320±.010 (8.13 ±.254) .610±.010 (15.5±.254) .320±.010 (8.13±.254) .610±.010 (15.5±.254) .110 (2.80) Max .090±.010 (2.29±.254) 3 3 Alumina Ring .110 (2.79) Max Terminal 1 Moly Lid .020±.005 R (.508±.127 ) Copper Terminals .130 (3.30) Max Moly Lid Alumina Ring .020±.005 R (.508±.127 ) Alumina Ring .020±.002 (.508±.051) Moly Base Terminal 1 SHD-5 Moly Base Terminal 1 .060±.010 (1.52±.254) SHD-5B SHD-5A PINOUT TABLE DEVICE TYPE DUAL RECTIFIER, COMMON CATHODE (P) .015±.002 (.381±.051) .060±.010 (1.52±.254) PIN 1 COMMON CATHODE Typical Forward Characteristics PIN 2 ANODE PIN 3 ANODE Typical Reverse Characteristics Instantaneous Reverse Current - I R (mA) 102 1 10 125 °C 150 °C 125 °C 101 100 °C 100 75 °C 10-1 50 °C 10-2 25 °C 10-3 0 25 °C 100 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 150 °C 102 10-1 0.0 0.2 0.4 0.6 Forward Voltage Drop -FV(V) 0.8 10 20 30 40 Reverse Voltage - RV (V) 50 Typical Junction Capacitance 1500 1400 1300 1200 1100 1000 900 800 700 600 500 0 10 20 30 40 Reverse Voltage - RV (V) 50 ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD118412 SHD118412PA SHD118412PB SENSITRON DATA SHEET 1081, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]