SS22 THRU SS210 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 100 Volts FEATURES CURRENT 2.0 Ampere DO-214AA（SMB） Low profile surface mount package Built in strain relief High switching speed Low voltage drop, high efficiency For use in low voltage high frequency inverters Free willing, and polarity protection applications Guardring for over voltage protection MECHANICAL DATA Case: Transfer molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Solder plated, solderable per MIL-STD-750 method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounce, 0.093 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified , Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% PARAMETER SYMBOL SS22 SS23 SS24 SS25 SS26 SS28 SS29 SS210 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 20 30 40 50 60 80 90 100 Volts Maximum RMS Voltage VRMS 14 21 28 35 42 56 63 70 Volts Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 90 100 Volts Maximum Average Forward Rectified Current at TL see figure 1 TL =105℃ I(AV) 2.0 Amps Peak Forward Surge Current 8.3mS single half sine-wave superimposed on rated load IFSM 50 Amps Maximum Instantaneous Forward Voltage @ 2.0A(Note1) Maximum DC Reverse TA = 25℃ Current at rated DC Blocking Voltage per TA = 100℃ element Typical Thermal Resistance (Note 2) Operating Junction Temperature Storage Temperature Range VF 0.55 0.70 0.5 IR 20.0 55 RθJL 12 -55 to +125 TSTG Volts mA 10.0 RθJA TJ 0.85 ℃/W -55 to +125 ℃ ℃ -55 to +150 1. Pulse test: 300μs pulse width, 1% duty cycle. 2. PCB mounted with 0.2”×0.2” (5.0mm×5.0mm) copper pads. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 SS22 THRU SS210 RATINGS AND CHARACTERISTIC Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2