NFC Ferrite Antenna (13.56MHz) ANFCA-2525-A02 Pb RoHS/RoHS II compliant Moisture Sensitivity Level (MSL) – MSL 1 FEATURES: • Ultra thin flexible antenna structure ( 220+/-46 μm) • Peel and Stick antenna designs • Ferrite sheet backing optimizes magnetic fields • Wide operating temperature range -40ºC to +85ºC • Matched to leading NFC controller IC’s • Customized solutions available 25 x 25 mm APPLICATIONS: • Mobiles • NFC Payment readers • Electronic wallets • Health care ID scanners • NFC data loggers transport • Ticketing systems • Museum information systems • Electronic Parking Payments • Industrial data collection. STANDARD SPECIFICATIONS: Maximum Ratings Item Value Operating Temperature Range Storage Temperature Range -40ºC to + 85ºC -40ºC to + 85ºC Item Spec Operating Frequency (MHz) 13.56 Inductance (μH) 1.8±10% RAC (Ω) 3.0±20% Test Condition 1 MHz/500mV Test equipment: TH2828S. Connection to the PCB While soldering thin wires to the pads on the antenna is possible, great care must be taken, (see manual soldering Section 10.1). However it is recommended to make contact to the antenna pads via Pogo Pins. These are soldered onto the product PCB, and interface mechanically via a pressure contact to the pads on the NFC antenna. Volume applications using the NFC antenna should always use Pogo Pins to make the connections. Product Customization Products can be customized according to customer requirements. Features such as the dimensions or shape of the coil or its inductance can be customized. Please contact ABRACON or authorized distributor / agent for further details. ABRACON IS ISO9001:2008 CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised:10.07.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale NFC Ferrite Antenna (13.56MHz) ANFCA-2525-A02 Pb RoHS/RoHS II compliant Moisture Sensitivity Level (MSL) – MSL 1 25 x 25 mm FEATURES: OUTLINE DIMENSIONS: View from rear ferrite side, pads upward (Dimensions in mm) CONSTRUCTION: No Material Name Thickness ( μm) Thickness (in) 1 PET Tape 10+/-3 0.000393±0.000118 2 Ferrite Sheet 100+/-5 0.00393±0.000196 3 Adhesive Tape 10+/-3 0.000393±0.000118 4 FCP 70+/-30 0.00275±0.000118 5 Adhesive Tape 30+/-5 0.00118±0.000196 6 Release Paper / / 220+/-46 0.00866±0.00181 Total Thickness ABRACON IS ISO9001:2008 CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised:10.07.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale NFC Ferrite Antenna (13.56MHz) ANFCA-2525-A02 Pb RoHS/RoHS II compliant 25 x 25 mm MATCHING CIRCUIT AND REFERENCE VALUES Component L0 Value for reference only (1) 560 / 330nH （NXP / Broadcom) C0 180pF C1 33pF C2 (Includes C2a and C2b values) 82pF Rq 0 Ohm Notes EMC filter resonance at 15.4MHz（NXP) and 20.6MHz (Broadcom). EMC filter resonance at 15.4MHz (NXP) and 20.6MHz (Broadcom). Antenna matching component, to achieve series resonance at 13.56MHz. (Note: Antenna matching component value may need optimization depending upon antenna environment) Antenna matching component, to achieve parallel resonance at 15MHz. (Note: Antenna matching component value may need optimization depending upon antenna environment). Damping resistor, the Rq resistor used to lower Q-value if above 35 Ohm, if needed. Note (1) Values can change depending upon drive circuits, design of the antenna and environment. Reflow Profile: Not recommended for reflow soldering Manual Soldering: Recommended Soldering iron temperature setting: 330°C, 3 seconds max, 3 times max. Packaging: 100pcs per polyphene bag / box ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised:10.07.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale