NFC Ferrite Antenna (13.56MHz) ANFCA-4030-A02 Pb RoHS/RoHS II compliant Moisture Sensitivity Level (MSL) – MSL 1 FEATURES: • Ultra thin flexible antenna structure (140 - 240 μm) • Peel and Stick antenna designs • Ferrite sheet backing optimizes magnetic fields • Wide operating temperature range -40ºC to +85ºC • Matched to leading NFC controller IC’s • Customized solutions available STANDARD SPECIFICATIONS: 40 x 30 mm APPLICATIONS: • Mobiles • NFC Payment readers • Electronic wallets • Health care ID scanners • NFC data loggers transport • Ticketing systems • Museum information systems • Electronic Parking Payments • Industrial data collection. Maximum Ratings Item Value Operating Temperature Range Storage Temperature Range -40ºC to + 85ºC -40ºC to + 85ºC Electrical Characteristics Item Spec Operating Frequency (MHz) 13.56 Inductance (μH) 1.7±10% Q-Factor min. 40 DC Resistance max. (Ω) 2.0 Test equipment: Agilent E4991A / 5071C Product Customization Products can be customized according to customer requirements. Features such as the dimensions or shape of the coil or its inductance can be customized. Please contact ABRACON or authorized distributor / agent for further details. OUTLINE DIMENSIONS: Dimensions in mm ABRACON IS ISO9001:2008 CE RTIFIED Revised: 02.17.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com NFC Ferrite Antenna (13.56MHz) ANFCA-4030-A02 Pb RoHS/RoHS II compliant 40 x 30 mm MATCHING CIRCUIT AND REFERENCE VALUES Component L0 Value for reference only (1) 560 / 330nH （NXP / Broadcom) C0 180pF C1 39pF C2 (Includes C2a and C2b values) 82pF Rq 0 Ohm Notes EMC filter resonance at 15.4MHz（NXP) and 20.6MHz (Broadcom). EMC filter resonance at 15.4MHz (NXP) and 20.6MHz (Broadcom). Antenna matching component, to achieve series resonance at 13.56MHz. (Note: Antenna matching component value may need optimization depending upon antenna environment) Antenna matching component, to achieve parallel resonance at 15MHz. (Note: Antenna matching component value may need optimization depending upon antenna environment). Damping resistor, the Rq resistor used to lower Q-value if above 35 Ohm, if needed. Note (1) Values can change depending upon drive circuits, design of the antenna and environment. Reflow Profile: Not recommended for reflow soldering Manual Soldering: Recommended Soldering iron temperature setting: 330°C, 3 seconds max, 3 times max. Packaging: 100pcs per polyphene bag / box ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 02.17.14 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com