Wireless Charging Coil Assembly AWCCA-107T52 Pb RoHS / RoHS II Compliant 107 x 52mm Moisture Sensitivity Level (MSL) – MSL = 1 FEATURES: • Wireless Charging Transmitter Coil Array • Outline Dimensions: 107.95mm x 52.5mm x 4mm • Linear Array of Primary Coils, 2 lower coils (12.0μH), 1 upper coil (11.5μH). • For Tx applications working with 12V • High permeability shielding to protect sensitive electronics • Durable construction • RoHS / RoHS II Compliant & Pb free APPLICATIONS: • Wireless Charging Stations • Automotive Industry (in car charging) • Batteries Chargers • Consumer Electronics Chargers • Mobile Phone Charging Accessories • Power Tool Charging Systems • Approved part for IDT Part Number IDTP9036A STANDARD SPECIFICATIONS Maximum Ratings Item Value -25ºC to + 85ºC RH≤ 90%. -25ºC to +85ºC, 70% RH (Max.) Operating Temperature Range Storage Temperature Range Part Number AWCCA107T52H40C01-B Test Condition Inductance Upper Coil 11.5μH ±10% Lower Coil 12.0uH ±10% 100KHz / 1V Q-Factor Current Rating (rms) Saturated Current (rms) DC Resistance R25 SRF 80±30% 7.5A Typ. 18A 56mΩ ±20% 10KΩ±3% 7MHz 20±15oC Ta=25 ±0.05oC Pτ ≤ 0.1mw 100KHz/1V Test Environment ΔT = 40 K 100KHz /1V Ambient Temperature: 20±15oC,RH:65%±20% Test Conditions A) - Ambient Temperature: 20±15oC, RH: 65% ±20%. If any doubt on the results, measurements/tests should be made within the following limits: Ambient Temperature: 20±2oC, RH: 65%±5% B) - Isat: DC current at which the inductance drops approximate 5% from its value without current. PART IDENTIFICATION: AWCCA-107T52 H40 ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED - C 01 - B X Height Feature Design Code Packaging H40 = 4.0mm C = Coil 01 B: Box Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.08.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Wireless Charging Coil Assembly AWCCA-107T52 Pb RoHS / RoHS II Compliant 107 x 52mm OUTLINE DIMENSIONS: Out Line Dimensions (unit mm) Winding Specifications Number of Coils Upper 1 Lower 2 Wire φ 0.08×100 φ 0.08×100 Number of Turns 12 12 Inductance 11.5μH ±10% 12.0μH ±10% Product Customization Products can be customized according to the Wireless Charging Coil Standards or to customer requirements. Please refer to the following table for the feature ranges, and contact ABRACON or authorized distributor / agent for further details. Inductance Range [μH] 1 ~ 100 DC Resistance Range [mΩ] 10 ~ 1000 Dimension Range [mm] 10 ~ 200 Thickness range [mm] 0.4 ~ 10 Manual Soldering: 350oC Max, 3secs Storage condition - Recommended storage conditions: -25oC~85oC, 70%RH (Max.) - Service life: Within the limits of six month from being produced. - The appearance and solder ability should be check, if product is not in expiry date. Operation Conditions - Use condition limit: T=-25oC ~ 85oC, RH≤ 90%. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.08.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com