23.3 x 11.93 x 2.0 mm SMT Bluetooth Module ABBTM-2.4GHz-52-T Compliant to MSL level 3 FEATURES: Pb RoHS Compliant 23.3 x 11.93 x 2.0 mm SMT | | | | | | | | | | | | | | | APPLICATIONS: • Stereo Bluetooth® headset/headphone • Automotive car kit applications • Personal Navigation Devices • PDAs and other portable terminals • MP3 headset • High-end noise cancellation mono headset • AV Dongle • Bluetooth Spec v2.1 Compliant • Class 2, up to 10-meter range • Complete 2.4GHz Bluetooth® System • Power management: low power 1.5V operation for Bluetooth® core • Compact size: 23.23mm (L) x 11.93 (W) mm x 2.0mm (H) • Bluetooth® Profile Supported: HSP, HFP, A2DP, AVRCP • Built-in 16-bit stereo codec – 92dB SNR for DAC • On-board flash memory (16 Mbits) • Optional echo cancellation software library • Support 802.11 co-existence • Surface mount module for embedded applications • Several firmware options • Rewritable flash memory for easy upgrade route • Custom firmware production available GENERAL DESCRIPTION Abracon's ABBTM-2.4GHz-52-T module is a complete Bluetooth® solution built on CSR BC05 MultiMedia External Core, supported by 16 Mbits on-board Flash Memory. ABBTM-2.4GHz-52-T is a short range, compact, cost effective solution designed to Bluetooth® connectivity for applications including PND, Car & Home Audio and other Handsfree applications. ABBTM-2.4GHz-52-T module is a Power Class-2 Bluetooth® device, compliant with version 2.1 of specification. The overall architecture comprises of a radio front-end, antenna interface & supporting circuitry for software protocols including L2CAP, SDP, GAP, HSP, HFP, A2DP and AVRCP resident in the on-board Flash Memory ELECTRICAL SPECIFICATIONS: Operating Frequency Band Bluetooth Specification Output Power Class Operating Voltage Host Interface Audio Interface Flash Memory Size 2.4GHz ~ 2.48GHz Unlicensed ISM Band V2.1 Class 2 +3.3V UART Analog 16 Mbits Storage temperature Supply voltage: VBAT Absolute Maximum Ratings Minimum -40ºC -0.30V Recommended Operating Conditions Minimum Operating temperature range -40ºC Supply voltage: Vcc +3.0V Supply voltage: Vdd +1.42V Maximum +105ºC 3.6V Maximum +85ºC +3.6V +1.57V Test Conditions: Vcc=3.3V; F=2.45GHz; T=20°C ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 01.14.15 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 23.3 x 11.93 x 2.0 mm SMT Bluetooth Module ABBTM-2.4GHz-52-T Pb RoHS Compliant 23.3 x 11.93 x 2.0 mm SMT | | | | | | | | | | | | | | | RF CHARACTERISTICS: RF Characteristics @ Core Vdd=1.5V Maximum RF transmit power(a)(b)(c) RF power variation over temperature range with compensation enabled. (e) RF power variation over temperature range with compensation disabled.(e) RF power control range RF power range control resolution(f) 20dB bandwidth for modulated carrier F = Fo ± 2MHz ACP(g) F = Fo ±3 MHz (h) F = Fo ± > 3MHz ∆f1avg Maximum modulation ∆f2max Minimum modulation ∆f1avg /∆f2avg Initial carrier frequency tolerance(i) Drift rate Drift(single slot packet) Drift(five slot packet) 2nd Harmonic content 3rd Harmonic content Min. Typ. Max. Bluetooth Specification Unit ----- 4 ----- -6 to 4(d) dBm ---- ±0.5 ----- ----- dB ----- ±2.5 ----- ----- dB 16 24 ----- ≥16 dB ----- 0.5 ----- ----- dB ----- 940 1000 ≤1000 kHz ------------- -36 -45 <-50 -20 -40 -40 ≤-20 ≤-40 ≤-40 dBm dBm dBm 140 165 175 140<f1avg<175 kHz 115 142 ----- ≥115 kHz 0.80 0.92 ----- ≥0.80 ----- -75 6 75 ±75 kHz -----25 -40 --------- 6 8 10 -32(j) -32(j) 20 25 40 --------- ≤20 ≤25 ≤40 ---------- kHz/50μs kHz kHz dBm dBm (a) Results are referenced to the single ended port of the balun. (b) The Bluecore5-Multimedia External firmware maintains the transmit power within Bluetooth v2.1 + EDR specification limits. (c) Measurement made using appropriate PS Key settings. (d) Class 2 RF transmit power range, Bluetooth v2.1 + EDR specification. (e) Parameters depend on matching circuit used and behaviour over temperature. These parameters may be beyond CSR’s direct control. (f) Resolution guaranteed over the range -5dB to -25dB relative to maximum power for TX level > 8dBm. (g) Measured at F0 = 2441MHz. (h) BlueCore5-Multimedia External guaranteed to meet ACP performance in Bluetooth v2.1 + EDR specification. (i) Ignores any frequency error in the reference. (j) Filter will attenuate the harmonics. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 01.14.15 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 23.3 x 11.93 x 2.0 mm SMT Bluetooth Module ABBTM-2.4GHz-52-T Ratio Characteristics @ Core Vdd=1.5V Ch 0 Ch 39 Ch 78 Sensitivity at 0.01% (a) BER Ch 0 Ch 39 Ch 78 Maximum received signal at 0.1% BER C/1 co-channel at 0.1% BER(b)(c) Adjacent channel selectivity C/I(b)(c) F=F0 + 1 MHz F=F0 - 1 MHz F=F0 + 2 MHz F=F0 - 2 MHz F=F0 - 3 MHz F=F0 + 5 MHz F= Fimage Pb RoHS Compliant Modulation Π/4 DQPSK 8 DPSK Π/4 DQPSK 8 DPSK Π/4 DQPSK 8 DPSK Π/4 DQPSK 8 DPSK Π/4 DQPSK 8 DPSK Π/4 DQPSK 8 DPSK Π/4 DQPSK 8 DPSK Π/4 DQPSK 8 DPSK Π/4 DQPSK 8 DPSK Π/4 DQPSK 8 DPSK Min -------------------------20 -20 ----------------------------------------------------------------- Typ -93 -93 -92 -85 -85 -84 >-10 >-10 10 18 -9 -2 -10 -5 -25 -22 -41 -34 -46 -38 -48 -41 -12 -12 Max -70 -70 -70 -70 -70 -70 ------13 21 0 5 0 5 -20 -13 -30 -25 -40 -33 -40 -33 -7 0 23.3 x 11.93 x 2.0 mm SMT Bluetooth Specification | | | | | | | | | | | | | | | Unit ≤-70 dBm ≤-70 dBm ≥-20 ≥-20 ≤13 ≤21 ≤0 ≤5 ≤0 ≤5 ≤-20 ≤-13 ≤-30 ≤-25 ≤-40 ≤-33 ≤-40 ≤-33 ≤-7 ≤0 dBm dBm dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB (a) Dirty transmitter used. (b) BlueCore5-Multimedia External is guaranteed to meet the C/I performance as specified by the Bluetooth v2.1 + EDR RF Test specification. (c) Measured at F0 = 2441MHz. However, depending on crystal frequency and channel number, then image may switch to the opposite side of the carrier. When this occurs, FImage = F0 – 3MHz and the offsets in the table equations associated with C/I are also reversed. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 01.14.15 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 23.3 x 11.93 x 2.0 mm SMT Bluetooth Module ABBTM-2.4GHz-52-T Pb RoHS Compliant 23.3 x 11.93 x 2.0 mm SMT | | | | | | | | | | | | | | | Firmware Configuration a) UART Baud: b) BlueTooth Name: c) Pin Code: 115200 , N, 8, 1 BlueAudio 0000 Software Description 1. 2. 3. 4. 5. After Power on 3V3, the module is connectable and Pairing ABBTM-2.4GHz-52-T can be found with the name “BlueAudio” via any Bluetooth device Input the Pincode “0000”, you can pair with the module named “BlueAudio” Then the BlueAudio can be connected Data can be transferred between the BlueAudio and any other Bluetooth device ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 01.14.15 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 23.3 x 11.93 x 2.0 mm SMT Bluetooth Module ABBTM-2.4GHz-52-T Pb RoHS Compliant 23.3 x 11.93 x 2.0 mm SMT | | | | | | | | | | | | | | | APPLICATION SCHEMATIC ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 01.14.15 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 23.3 x 11.93 x 2.0 mm SMT Bluetooth Module ABBTM-2.4GHz-52-T Pb RoHS Compliant 23.3 x 11.93 x 2.0 mm SMT | | | | | | | | | | | | | | | MECHANICAL DIMENSIONS Pin 22 Pin 16 Section A - A Pin 1 Pin 37 Recommended Land Pattern Section B - B Note: Specified dimensions without tolerance are listed for reference purposes only. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Dimensions: mm. Revised: 01.14.15 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 23.3 x 11.93 x 2.0 mm SMT Bluetooth Module ABBTM-2.4GHz-52-T Pb RoHS Compliant 23.3 x 11.93 x 2.0 mm SMT | | | | | | | | | | | | | | | PIN DESCRIPTION ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Pin No. 1 2 Name GND RESETB 3 4 SPI_CLK SPI_MISO 5 SPI_MOSI 6 SPI_CSB 7 PIO10 8 PIO11 9 PIO5 10 PIO3 11 PIO2 12 PIO0 13 PIO1 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 AUX_DAC GND MIC_BIAS RF_GND RF_IN RF_GND AIO1 AIO0 GND MIC_LP MIC_LN SPK_LN SPK_LP SPK_RN SPK_RP PIO13 30 31 3V3 N.C. 32 33 34 N.C. GND PIO14 35 PIO9 36 PIO4 37 38 GND UART_TX 39 UART_RX 40 PIO8 41 PIO7 42 PIO6 Type Ground CMOS Input with weak internal pullup Input with weak internal pull-down CMOS Output, tri-state, with weak internal pull-down CMOS Input with weak internal pulldown CMOS Input with weak internal pullup Bi-directional with programmable strength internal pull-up/down Bi-directional with programmable strength internal pull-up/down Bi-directional with programmable strength internal pull-up/down Bi-directional with programmable strength internal pull-up/down Bi-directional with programmable strength internal pull-up/down Bi-directional with programmable strength internal pull-up/down Bi-directional with programmable strength internal pull-up/down Analogue Ground Analogue RF Ground Analogue RF Ground Bi-directional Bi-directional Ground Analogue Analogue Analogue Analogue Analogue Analogue Bi-directional with programmable strength internal pull-up/down 3.3v power input Not Connected Not Connected Ground Bi-directional with programmable strength internal pull-up/down Bi-directional with programmable strength internal pull-up/down Bi-directional with programmable strength internal pull-up/down Ground Bi-directional CMOS Output, tristate, with weak internal pull-up CMOS Input with weak internal pulldown Bi-directional with programmable strength internal pull-up/down Bi-directional with programmable strength internal pull-up/down Bi-directional with programmable strength internal pull-up/down Function Ground Reset if low. Input debounced so must below for >5ms to cause a reset Serial Peripheral Interface clock Serial Peripheral Interface output Serial Peripheral Interface input Chip select for Synchronous Serial Interface active low Programmable input/output line Programmable input/output line Programmable input/output line Programmable input/output line Programmable input/output line Programmable input/output line Programmable input/output line Voltage DAC output Ground Microphone Bias RF Ground Transceiver input/output line RF Ground Analogue Programmable input/output Analogue Programmable input/output Ground Microphone input positive Microphone input negative Speaker output negative(left side) Speaker output positive(left side) Speaker output negative(right side) Speaker output positive(right side) Programmable input/output line 3.3v power input Ground Programmable input/output line Programmable input/output line Programmable input/output line Ground UART data output UART data input Programmable input/output line Programmable input/output line Programmable input/output line Revised: 01.14.15 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 23.3 x 11.93 x 2.0 mm SMT Bluetooth Module ABBTM-2.4GHz-52-T Pb RoHS Compliant 23.3 x 11.93 x 2.0 mm SMT | | | | | | | | | | | | | | | REFLOW PROFILE TS max to TL (Ramp-up Rate) 3°C/second max. Preheat Temperature Min. (TS Min.) Temperature Typical (TS Typ.) Temperature Max. (TS Max.) Time (tS) 150°C 175°C 200°C 60 ~ 180 seconds Ramp-up rate (TL to Tp ) Time Maintained Above: --Temperature (TL)/Time (TL) Peak Temperature (Tp) Target Peak Temperature (Tp Target) Time within 5°C of actual peak (tp) Ramp-down Rate Tune 25°C to Peak Temperature (t) 3°C/second max. 217°C/60 ~ 150 seconds 250°C max. for 10 seconds 250°C +0/-5°C 20 ~ 40 seconds 6°C/second max. 8 minutes max. PACKAGING: 500pcs/reel Section B-B Section A-A a) Unless otherwise specified, the tolerance is ±0.1mm b) The carrier tape material thickness is 0.4mm c) Unless otherwise specified, the round corner is R0.3; the peeling angle is no greater than 5° d) The finished products has no rough edges and no damage; cover tape should is sealed e) Material is ROHS compliant Packaging: ABBTM-2.4GHz-52-T devices will be packaged per MSL level-3 requirements; Labeled as MSL 3, Tape- Packed + Vacuum-Packed with Antistatic bag, Desiccant, Humidity Indicator Card (HIC). Ref: IPC/JEDEC J-STD-033B.1 ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 01.14.15 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com