26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T FCC ID# A8RABBTM2-4G Compliant to MSL level 3 Pb RoHS Compliant FEATURES: APPLICATIONS: • Bluetooth Spec v2.0+EDR Compliant • Class 2, up to 10-meter range • Complete 2.4GHz Bluetooth® System • Power management: low power 1.8V operation for Bluetooth® core • Compact size: 26.9mm (L) x 13 (W) mm x 2.5mm (H) • Bluetooth® Profile Supported: SPP • Internal antenna • On-board flash memory (8Mbits) • Surface mount module for embedded applications • Several firmware options • Rewritable flash memory for easy upgrade route • Custom firmware production available • Hand-held devices • Printers • Personal Navigation Devices • PDAs and other portable terminals 26.9 x 13.0 x 2.5 mm SMT | | | | | | | | | | | | | | | GENERAL DESCRIPTION Abracon's ABBTM is a complete Bluetooth® solution. It is built on CSR BC04-External Core and 8Mbit Flash memory. It’s a short range, compact and cost effective module. Designed to be embedded into electronic devices needing Bluetooth® connectivity. The ABBTM module is a power class2 Bluetooth® device, and is in compliance with version 2.0+EDR of the Bluetooth® specification. It includes CSR BC04-External Core and 8Mbit Flash memory, internal antenna, supporting circuitry, together with higher-level software protocols and applications such as L2CAP, SDP and GAP are resident in the flash memory. Operating Frequency Band Bluetooth Specification Output Power Class Operating Voltage Host Interface Audio Interface Flash Memory Size 2.4GHz ~ 2.48GHz Unlicensed ISM Band V2.0 + EDR Class 2 +3.3V UART PCM Interface 8 MB ELECTRICAL SPECIFICATIONS: Storage temperature Supply voltage: VBAT Other terminal voltages Absolute Maximum Ratings Minimum -40ºC -0.4V VSS-0.4V Recommended Operating Conditions Minimum Operating temperature range -40ºC Guaranteed RF performance range -40ºC Supply voltage: VBAT 2.2V ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED LLC Maximum +150ºC 5.6V VDD+0.4V Maximum +85ºC +85ºC 4.2V 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale 26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T Pb RoHS Compliant FCC ID# A8RABBTM2-4G 26.9 x 13.0 x 2.5 mm SMT | | | | | | | | | | | | | | | POWER CONSUMPTION Operation Mode Page scan Connection Type UART Rate (kbps) Average - 115.2 0.42 mA Unit ACL No traffic Master 115.2 4.60 mA ACL With file transfer Master 115.2 10.3 mA ACL 1.28s sniff Master 38.4 0.37 mA ACL 1.28s sniff SCO HV3 30ms sniff Slave Master 38.4 38.4 0.42 19.8 mA mA Slave 38.4 19.0 mA - 38.4 40 µA SCO HV3 30ms sniff Standby Host connection Note: Low power mode on the linear regulator is entered and exited automatically when the chip enters/leaves Deep Sleep mode. REFERENCE CIRCUIT BT_TX BT_RX 3V3 LED ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED LLC BlueTooth UART Tx BlueTooth UART RX Module Power State indication 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale 26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T Pb RoHS Compliant FCC ID# A8RABBTM2-4G 26.9 x 13.0 x 2.5 mm SMT | | | | | | | | | | | | | | | Firmware Configuration a) UART Baud: b) BlueTooth Name: c) Pin Code: 115200 , N, 8, 1 ABBTM 0000 Software Description 1. 2. 3. 4. 5. After Power on 3V3, the module is connectable and Pairing ABBTM-2.4GHz-T can be found with the name “ABBTM” via any Bluetooth device Input the Pincode “0000”, you can pair with the module named “ABBTM” Then the ABBTM can be connected Data can be transferred between the ABBTM and any other Bluetooth device State Indicator a) Connectable and discoverable LED: b) Connected LED: 100mS High Level per 2S always on MECHANICAL DIMENSIONS Recommended Land Pattern Pin # 34 Pin # 1 No. Pin Name No. Pin Name No. 1 UART-TX 13 GND 25 PIO (2) 2 UART-RX 14 GND 26 PIO (3) 3 UART-CTS 15 NC 27 PIO (4) 4 UART-RTS 16 SPI-CSB 28 PIO (5) 5 PCM-CLK 17 SPI-MOSI 29 PIO (6) 6 PCM-OUT 18 SPI-MISO 30 PIO (7) 7 PCM-IN 19 SPI-CLK 31 PIO (8) 8 PCM-SYNC 20 NC D+ USB 32 PIO (9) 9 AI0 (0) 21 GND 33 PIO (10) 10 AIO (1) 22 GND 34 PIO (11) 11 RESET 23 PIO (0) 12 +3.3V 24 PIO (1) Note: Specified dimensions without tolerance are listed for reference purposes only. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED LLC Pin Name Dimensions: mm. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale 26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T Pb RoHS Compliant FCC ID# A8RABBTM2-4G 26.9 x 13.0 x 2.5 mm SMT | | | | | | | | | | | | | | | PIN DESCRIPTION Pin # ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Name Type 1 2 3 4 5 6 7 8 9 10 UART-TX UART-RX UART-CTS UART-RTS PCM-CLK PCM-OUT PCM-IN PCM-SYNC AIO(0) AIO(1) CMOS Output CMOS Input CMOS Input CMOS Output Bi-directional CMOS Output CMOS Input Bi-directional Bi-directional Bi-directional 11 RESETB CMOS Input 12 13 14 15 3.3V GND GND USB NC D- POWER GND GND Bi-directional NC 16 17 18 19 SPI-CSB SPI-MOSI SPI-MISO SPI-CLK CMOS Input CMOS Input CMOS Output CMOS Input 20 21 22 USB NC D+ GND GND 23 PIO(0) 24 PIO(1) 25 26 PIO(2) PIO(3) 27 PIO(4) 28 PIO(5) 29 PIO(6) 30 31 32 33 34 PIO(7) PIO(8) PIO(9) PIO(10) PIO(11) Bi-directional NC GND GND Bi-directional with programmable strength Bi-directional with programmable strength Bi-directional Bi-directional Bi-directional with programmable strength Bi-directional with programmable strength Bi-directional with programmable strength Bi-directional Bi-directional Bi-directional Bi-directional Bi-directional Function UART Data Output UART Data Input UART Clear To Send Active Low UART Request To Send Active Low Synchronous Data Clock Synchronous Data Output Synchronous Data Input Synchronous Data Sync Programmable Input/Output Line Programmable Input/Output Line Reset if low.Input debounced so must be low for>5ms to cause a reset +3.3V Supply Ground Ground USB Data Minus Chip Select For Synchronous Serial Interface Serial Peripheral Interface Data Input Serial Peripheral Interface Data Output Serial Peripheral Interface Clock USB Data Plus with selectable internal 1.5KΩ Ground Ground Control output for external LNA (if fitted) Control output for external PA (if fitted) Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line or optional BT_Priority/CH_Clk output for coProgrammable Input/Output Line or optional BT_Active output for co-existence Programmable Input/Output Line or optional WLAN_Active/Ch_Data input for coProgrammable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line Programmable Input/Output Line LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale 26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T Pb RoHS Compliant FCC ID# A8RABBTM2-4G 26.9 x 13.0 x 2.5 mm SMT | | | | | | | | | | | | | | | PART IDENTIFICATION: ABBTM-2.4GHz - Blank T T2 Packaging Options Bulk 500 units per reel 250 units per reel MARKING Line #1: Abracon Logo Line #2: Abracon Part # Line #3: Date Code (wk / year) Line #4: RoHS Line #4: CE Certification Symbols Line # 3: FCC ID REFLOW PROFILE TS max to TL (Ramp-up Rate) 3°C/second max. Preheat Temperature Min. (TS Min.) Temperature Typical (TS Typ.) Temperature Max. (TS Max.) Time (tS) 150°C 175°C 200°C 60 ~ 180 seconds Ramp-up rate (TL to Tp ) Time Maintained Above: --Temperature (TL)/Time (TL) Peak Temperature (Tp) Target Peak Temperature (Tp Target) Time within 5°C of actual peak (tp) Ramp-down Rate Tune 25°C to Peak Temperature (t) ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED LLC 3°C/second max. 217°C/60 ~ 150 seconds 250°C max. for 10 seconds 250°C +0/-5°C 20 ~ 40 seconds 6°C/second max. 8 minutes max. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale 26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T Pb RoHS Compliant FCC ID# A8RABBTM2-4G 26.9 x 13.0 x 2.5 mm SMT | | | | | | | | | | | | | | | PACKAGING: (500) units per reel standard, (250) units per reel available (option # T2) a) Unless otherwise specified, the tolerance is ±0.1mm b) The carrier tape material thickness is 0.4mm c) Unless otherwise specified, the round corner is R0.3; the peeling angle is no greater than 5° d) The finished products has no rough edges and no damage; cover tape should is sealed e) Material is ROHS compliant Packaging: ABBTM-2.4GHz-T and ABBTM-2.4GHz-T2 devices will be packaged per MSL level-3 requirements; Labeled as MSL 3, Tape-Packed + Vacuum-Packed with Antistatic bag, Desiccant, Humidity Indicator Card (HIC). Ref: IPC/JEDEC J-STD-033B.1 ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale