2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. 0.46 11.68 B 2.06 [52.3] 0.65 16.4 0.54 0.26 13.8 6.6 DUST CAP REMOVED IN ALL VIEWS NOTES: 1. CONSTRUCTED TO MEET THE CONNECTOR STANDARD IEC 60603-7. 2. THE TRANSMISSION PERFORMANCE IS 1 GIGABIT ETHERNET AND IS ADEQUATE FOR PoE ACCORDING TO IEEE 802.3af AND PoE ACCORDING TO IEEE 802.3at 3. MEETS THE FOLLOWING CATEGORIES: A. EXCEEDS CHANNEL AND PATCH CORD REQUIREMENTS OF ANSI/TIA-568-C.2 CATEGORY 6 AND CATEGORY 5e, AND ISO 11801 CLASS E AND CLASS D STANDARDS AT SWEPT FREQUENCIES UP TO 250 MHz & 100 MHz RESPECTIVELY AND MEETS ODVA ETHERNET/IP ELECTRICAL AND MECHANICAL PERFORMANCE WHEN INSTALLED WITH OTHER PANDUIT COMPONENTS. B. MEETS THE CHANNEL REQUIREMENTS OF ANSI/TIA-568-C.2 CATEGORY 6A & ISO 11801 2ND EDITION CLASS EA IN A 4-CONNECTOR CONFIGURATION UP TO 100 METERS AT SWEPT FREQUENCIES UP TO 500MHz WHEN INSTALLED WITH OTHER PANDUIT CATEGORY 6A COMPONENTS. 4. CABLE CONSTRUCTION ACCEPTANCE: FOR PART NUMBER: ISPS688FAS A. CONDUCTOR DIAMETER: 1. SOLID: 26/1-24/1 AWG, 0.016"-0.020" [0.41MM-0.51MM] 2. STRANDED: 27/7-24/7 AWG, 0.018"-0.024" [0.46MM-0.61MM] 3. STRANDED: 26/19 AWG, 0.020" [0.51MM] B. INSULATION DIAMETER: 0.033"-0.039" [0.85MM-1.0MM] C. CABLE DIAMETER: 0.197"-0.354" [5.0MM-9.0MM] 5. CABLE CONSTRUCTION ACCEPTANCE: FOR PART NUMBER: ISPS688FA A. CONDUCTOR DIAMETERS: 1. SOLID: 24/1-22/1 AWG, 0.020"-0.025" [0.51MM-0.64MM] 2. STRANDED: 27/7-22/7 AWG, 0,018"-0.030" [0.46MM-0.76MM] 3. STRANDED: 24/19-22-19 AWG, 0.024"-0.031" [0.61MM-0.78MM] B. INSULATION DIAMETER: 0.039"-0.063" [1.0MM-1.6MM] C. CABLE DIAMETER: CABLE DIAMETER: 0.197"-0.354" [5.0MM-9.0MM] 6. CONSTRUCTION: A. ALL MATERIALS AND COMPONENTS USED MUST MEET THE MATERIAL RESTRICTIONS OF RoHS, (EUROPEAN DIRECTIVE 2011/65/EU ON THE RESTRICTION OF HAZARDOUS SUBSTANCES) AS PROPOSED BY THE RoHS TECHNICAL ADAPTATION COMMITTEE. B. COMPONENT MATERIALS: 1. CONNECTOR HOUSING: ZINC DIECAST WITH (NI) PLATING 2. WIRE PRESORTING, CONTACT HOUSING: PC UL 94V-0 3. HOOK, STRAIN RELIEF LEVER, PROTECTION CAP: PC UL 94V-0 4. PCB: FR4 UL 94V-0 5. PIERCING CONTACTS: PHOSPHOR BRONZE (MIN 3.6mm (Sn) PLATED) 6. SHIELD CONTACT: BRASS 2.5mm (NI); 2.5mm (NI) PLATED 7. CONTACTS: SPRING STEEL 8. CONTACT FINISH: MINIMUM 0.8mm (AU) ON 1.2mm (NI) 7. ENVIRONMENTAL: A. OPERATING TEMPERATURE: -40 F TO +185 F [-40 C TO +85 C] B. STORAGE TEMPERATURE: -40 F TO +185 F [-40 C TO +85 C] C. INGRESS PROTECTION RATING (IP): IP20 8. c(UL)us MEETS UL1863, CSA 22.2. 9. MEETS OR EXCEEDS ANSI/TIA-568-C.2 CATEGORY 6A/ISO 11801 CLASS EA PATCH CORD REQUIREMENTS WHEN USED WITH PSM7004 PANDUIT CABLE 10. WEIGHT: A. COMPLETE PLUG - 0.42 LBS/10 PCS (189.32g/10PCS) WITHOUT PROTECTIVE CAP. B. WIRE MANAGER ONLY - 0.07LBS/10PCS (35.00g/10PCS). PART NUMBER B PRODUCT SPEC/PKG SPEC SEE TABLE 1, SHEET 2 I.I. NUMBER N/A WORK INSTRUCTION N/A N/A TITLE FIELD TERMINABLE CATEGORY 6A SHIELDED RJ45 PLUG CONNECTORS AND WIRE MANAGERS A CUSTOMER DRAWING ITEM REVISION NAME 13M438AA/02 DATASET FILE NAME 13M438AA_DC02/02A MATERIAL: D10100DA/14 UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] 5 9-23-15 MDJR DCS GAZ A. UPDATED DRAWING FOR WIRE MANAGER DETAILS. 4 7-16-14 BJN DCS GAZ REVISED 13M438AA-02 .X .XX .1 [2.54] .01 [.25] .XXX ANGLES SEE NOTES .005 [.127] 5 DRAWING NUMBER: & REDRAWN PREVIOUS REVISIONS REMVD FOR CLARITY THIRD ANGLE PROJECTION 13M438AA-02 DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN BJN DATE CHK 1-14-14 13M438AA-02 SIZE SCALE DCS NONE 1 SHT 1 OF 2 A A 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. PIN ASSIGNMENT T568A ACCORDING TO TIA-568-C.2 BR GR WH/GR WH/BR 0.55 0.69 13.90 17.40 WH/BU WH/OR B WIRE MANAGER B BU OR MAIN BODY DUST CAP 2.08 1.15 52.95 29.24 PIN ASSIGNMENT T568B ACCORDING TO TIA-568-C.2 BR OR WH/BR WH/OR 0.40 10.14 WH/GR GR DUST CAP SHOWN IN ABOVE VIEWS WH/BU BU PART NUMBER TABLE 1 PART NUMBERS COMPLETE ASSEMBLY WIRE MANAGER (ONLY) ISPS688FA ISPS688FA-WM ISPS688FAS ISPS688FAS-WM A PRODUCT SPEC/PKG SPEC SEE TABLE 1 N/A I.I. NUMBER WORK INSTRUCTION N/A N/A TITLE FIELD TERMINABLE CATEGORY 6A SHIELDED RJ45 PLUG CONNECTORS AND WIRE MANAGERS CUSTOMER DRAWING ITEM REVISION NAME 13M438AA/02 DATASET FILE NAME 13M438AA_DC02/02A MATERIAL: D10100DA/14 UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] 5 9-23-15 MDJR DCS GAZ SEE SHEET 1 FOR REVISION HISTORY 13M438AA-02 4 7-16-14 BJN DCS GAZ SEE SHEET 1 FOR REVISION HISTORY 13M438AA-02 .X .XX .1 [2.54] .01 [.25] .XXX ANGLES .005 [.127] 5 SEE NOTES ON SHEET 1 DRAWING NUMBER: THIRD ANGLE PROJECTION DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN BJN DATE CHK 1-14-14 13M438AA-02 SIZE SCALE DCS NONE 1 SHT 2 OF 2 A A