1000 Base-T LAN Transformer with PoE+ ALAN-511 RoHS/RoHS II Compliant FEATURES: • Designed for long haul Gigabit Ethernet with PoE+ capacity • Compliant with IEEE 802.3at specification • Supports 4 pairs of category 5 UTP cables 18.03 x 15.70 x 6.90 mm APPLICATIONS: • ATM Machine, Laptop Computer • Point of Sales Terminal, Printer, Security System, ATM Machine • Set Top Boxe, VOIP Telephony STANDARD SPECIFICATIONS: Parameters Minimum Operating Temperature Typical Maximum Units 0 +70 °C Storage Temperature -40 +85 °C OCL Turn Ratio (±5%) 350 µH Notes @100kHz, 0.1V, 8mA 1CT: 1CT Insertion Loss -1.0 dB 0.1-100MHz CWW 30 pF @100kHz, 0.1V PoE+ rating 750 mA High Pot 1500Vrms, 0.5mA, 1sec OUTLINE DRAWING: Recommended Land Pattern Package type: Transfer Molding Dimensions: inch/mm (Unless otherwise specified, tolerances are ± 0.010/0.25) SCHEMATICS ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.20.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 1000 Base-T LAN Transformer with PoE+ ALAN-511 RoHS/RoHS II Compliant 18.03 x 15.70 x 6.90 mm | | | | | | | | | | | | | | | REFLOW PROFILE: Average Ramp-Up Rate (Ts max to Tp) 3°C /second max. Preheat -Temperature Min (Ts min) -Temperature Max (Ts max) -Time (ts min to ts max) 150°C 200°C 60-180 seconds Time maintained above: -Temperature (TL) -Time (tL) 217°C 60-150 seconds Peak/Classification Temperature (Tp) Time within 5°C of actual Peak Temperature (tp) Ramp-Down Rate 245±5°C 20-40 seconds Time 25°C to Peak Temperature 6 minutes max. 6°C /seconds max TAPE & REEL: 450pcs/reel A B C D E 330 100 13 36.4 32.4 Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.20.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com