GPS Active Antenna Module - Adhesive Mount APAMS-104 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 111 x Ø6.78 mm MSL level: Not Applicable FEATURES: • High Reliability/ Sensitivity • Compact Size • Easy to install (adhesive tape base) • SGS • ROHS Compliant TYPICAL APPLICATIONS: • Wireless Communications • GSM • GPRS • CDMA • UMTS • Vehicle Monitoring STANDARD SPECIFICATIONS: Parameters Frequency Range Bandwidth VSWR Polarization Model Impedance Gain Azimuth Operating Temperature Storage Temperature Min. 890 1710 Typ. Max. 960 1880 70 170 Units MHz MHz MHz MHz Note (GSM900) (GSM1800) @900MHz @1800MHz 2:1 Vertical 50 2.5 3.0 Omni-Directional -40 +80 -45 +85 Ω dBi dBi @900MHz @1800MHz ˚C ˚C OUTLINE DRAWING: Parameters L (Cable Length) Antenna Length RF Cable Base Diameter Connector Color Mounting Description 250±10cm 30x109.5mm RG174 30mm SMA-J3 Black Adhesive Tape Unit: mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.23.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS Active Antenna Module - Adhesive Mount APAMS-104 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 111 x Ø6.78 mm PRODUCT IMAGE: PACKAGING: Each 400x32.5x180mm size carton includes 300 pieces of antenna. CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.23.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com