Flyback Transformer, SMT, 8 pin AFBT-01-T RoHS/RoHS II Compliant per EU Directive 2002/95/EC 12.70 x 15.24 x 11.43mm FEATURES: APPLICATIONS: • Allows 36 – 72 Vdc input to operate at 250kHz • Provides 1500 Vrms isolation between primary and bias - secondary • Supports 7W PoE Applications with 3.3V, 2.1A output • Fits in Texas Instruments TPS23753A – Power Management IC Evaluation Board ELECTRICAL SPECIFICATIONS: AFBT-01-T -20˚C to +100˚C -20˚C to +100˚C Abracon P/N: Operating Temperature Storage Temperature Parameters Minimum Inductance 139.5 Saturation Inductance 139.5 Typical Units 155 170.5 4.0 uH 414 mΩ Pri@250kHz, 0.1Vrms Pri@50kHz, 0.1Vrms, 0.65Adc Pri, short 5-6-7-8-2-1 @250kHz, 0.1Vrms (3-4) 822 mΩ (2-1) 50 mΩ (6-8), (5-7) MΩ Pri+Bias : Sec @500VDC Pri+Bias : Sec @2mA, 50Hz, 3s uH Leakage Inductance DCR (for reference only) Insulation Resistance 100 Hipot uH Notes 1500 Vrms PART IDENTIFICATION: AFBT-01 Packaging T: 200pcs/reel Blank: Bulk OUTLINE DIMENSION: Recommended Land Pattern Dimensions: inch/mm (Unless otherwise specified, all tolerances are ±0.01/0.25) ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.16.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Flyback Transformer, SMT, 8 pin AFBT-01-T RoHS/RoHS II Compliant per EU Directive 2002/95/EC 12.70 x 15.24 x 11.43mm SCHEMATIC PROFILE OF WAVE SOLDERING ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.16.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Flyback Transformer, SMT, 8 pin AFBT-01-T RoHS/RoHS II Compliant per EU Directive 2002/95/EC 12.70 x 15.24 x 11.43mm TAPE & REEL: Packing (200pcs/Reel) W P Po T 32.0+0.30, 12.40±0.10 16.00±0.10 12.00±0.10 20.00±0.10 4.00±0.10 0.50±0.05 -0.00 Ao Bo Ko A 330 B 100 C 13 G 32.40 T 37.20 Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.16.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com