www.osram.com Product Information PARATHOM® CLASSIC A60 froste ed Product Overview Product PARATHOM® CLASSIC A60 f frosted t d E27 Wattage CCT lm Base 10 2700 806 E27 Benefits Key y Features • • • • • • 10W LED lamp as high-quality replacement for a 60W incandescent candle lamp • E27 base • Available in 2700K warm white color temperature • Energy efficiency class A+ • 15,000 hours lifetime² • UV and NIR radiation free • Mercury free • 4 years Osram Guarantee (www.osram.com/guarantee) For all household luminaires Low energy consumption and maintenance costs Longer lifetime¹ GLS inspired Design Made in Italy Product PARATHOM® CLASSIC A60 frosted Wattage CCT 10 2700 lm Base Diameter Lenght Weight Viewing Angle 806 E27 110 0 mm 150 g 260° 60 mm EAN10 4052899911734 EAN40 (ship.unit) 4052899911765 Ship. unit 10 ¹Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing m process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the t actual technical parameters of an individual product; individual products may vary from the typical values. ² The average lifetime of LED lamps is defined as the number of hours when the light output o of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, ba ase up burning position and at rated voltage. PARATHOM® CLASSIC A60 frosted 1 www.osram.com Product Information PARATHOM® CLASSIC A60 frosted Common Characteristics3 Average lifetime4 Switching cycles Casing material Starting time Warm up time for 60% light Power factor 0.6 (30s on, 30s off) 15,000 hrs 100,000 Plastic < 0,2 s 0.0 s Nominal current Max. inrush current Tc temperature max.5 CRI Mercury max. 0,05A A 95°C 80 0.0 mg 5 Good heat exchange supports ideal performance Disposal information • Lamps with WEEE sign can be returned at specific collection points. • LED lamps have to be disposed as special waste. 3 Typical values. All the technical parameters apply to the entire lamp. In view of the comple ex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to o the actual technical parameters of an individual product; individual products may vary from the typical values. 4 The Th average lif lifetime i off LED llamps iis d defined fi d as the h number b off h hours when h the h lilight h outpu ut off 50% off a llarge group off id identical i l lamps l goes b below l 70% off iits iinitial i i l lluminous i fl flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage. 5 The Tc is defined as the highest permissible temperature which may occur on the outer su urface of the LED lamp (in the indicated position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (D DIN EN 62031: 2009-01) PARATHOM® CLASSIC A60 frosted 2 www.osram.com Product Information PARATHOM® CLASSIC A60 frosted Application information • • • • • Suitable for indoor application. ecial approved fixture are required. For outdoor applications and operation in damp locations spe Input voltage: 220-240V Storage temperature & humidity conditions (-20°C up to +40°C C, at max. 95% relative humidity) Operating temperature & humidity conditions (-20°C up to +40 0°C, at max. 95% relative humidity) Lamp conformity • • • • • • • • • • • 2004/108/EC Electromagnetic compatibility (EMC) 244/2009 Ecodesign requirements for non-directional household lamps IEC/ PAS 62612 Self ballasted LED-lamps for general lighting g services – Performance requirements 2009/125/EC Ecodesign requirements for energy related prod ducts 2011/65/EC Restriction of the use of certain hazardous substa ances in electrical and electronic equipment (RoHS) 1907/2006 Registration, Evaluation, Authorisation and Restricction of Chemicals (REACH Regulation) 2002/96/EC Waste Electrical and Electronic Equipment Directtive (WEEE) EN 62471 Photobiological safety of lamps and lamp systems EN 55015 Limits and methods of measurement of radio disturrance EN 61000-3-2 Electromagnetic compatibility – Limits for harm monic current emission EN 61000-3-3 Electromagnetic compatibility – Limitation of vo oltage changes, voltage fluactuations, flicker in public low voltage supply systems • EN61547 Electromagnetic compatibility immunity requirementts • 1194/2012 Eco design requirement for directional lamps, lightt emitting diode lamps and related equipment (DIM II) • IEC 62560 self-ballasted LED-lamps for general lighting servicces by voltage >50V – Safety specifications • 874/2012/EU Energy labeling of electrical lamps and luminaire es PARATHOM® CLASSIC A60 frosted 3