pdf

www.osram.com
Product Information
PARATHOM® CLASSIC P40 froste
ed & clear sparkling
Product Overview
Product
Wattage
CCT
lm
Base
PARATHOM® P40 frosted E14
6
2700
470
E14
PARATHOM® P40 frosted E27
6
2700
470
E27
PARATHOM® P40 clear sparkling E14
6
2700
470
E14
PARATHOM® P40 clear sparkling E27
6
2700
470
E27
Benefits
Key
y Features
•
•
•
•
•
• 6W LED lamp as high-quality replacement for a 40W
incandescent lamp
• E14 base and E27 base
• Available in 2700K warm white color temperature
• Energy efficiency class A+
• 20,000 hours lifetime2
• Similar dimensions as incandescent lamp
• UV and NIR radiation free
• Mercury free
• 3 years Osram Guarantee (www.osram.com/guarantee)
For all household luminaires
Low energy consumption and maintenance costs
Longer lifetime1
GLS inspired Design
True 40W incandescent replacement
Product
Wattage CCT
lm
Base Diameter
Lenght
Weight
Viewing
Angle
EAN10
PARATHOM® P40 frosted
E14
6
2700
470
E14
42,8 mm
88 mm
58 g
250°
4052899912014
EAN40
(ship.unit)
4052899912151
Ship.
unit
PARATHOM® P40 frosted
E27
6
2700
470
E27
42,8 mm
86 mm
72 g
250°
4052899912021
4052899912168
10
PARATHOM® P40 clear
sparkling E14
6
2700
470
E14
42,8 mm
88 mm
59g
220°
4052899912045
4052899912182
10
PARATHOM® P40 clear
sparkling E27
6
2700
470
E27
42,8 mm
86 mm
74 g
220°
4052899912038
4052899912175
10
10
1 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the
technical LED parameters are merely statistical values that do not necessarily correspond to the
t actual technical parameters of an individual product; individual products may vary
from the typical values.
2 The average lifetime of LED lamps is defined as the number of hours when the light output o
of 50% of a large group of identical lamps goes below 70% of its initial luminous flux
(L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, ba
ase up burning position and at rated voltage.
PARATHOM® CLASSIC P40 frosted & clear
sparkling
BU LP PPM Led Lamps
For internal use only
1
www.osram.com
Product Information
PARATHOM® CLASSIC P40 frosted & clear sparkling
Common Characteristics3
Average
lifetime4
Switching
cycles
Casing material
Starting time
Warm up time
for 60% light
Power factor
0.5
(30s on, 30s off)
20,000 hrs
100,000
Plastic
< 0,2 s
0.0 s
Nominal current
Max. inrush
current
Tc temperature
max.5
CRI
Mercury max.
48 mA
6,1 A
95°C
80
0.0 mg
TC
5
Good heat exchange supports ideal performance
Disposal information
• Lamps with WEEE sign can be returned at specific collection points.
• LED lamps have to be disposed as special waste.
3
Typical values. All the technical parameters apply to the entire lamp. In view of the comple
ex manufacturing process for light emitting diodes, the typical values given above for the
technical LED parameters are merely statistical values that do not necessarily correspond to
o the actual technical parameters of an individual product; individual products may vary
from the typical values.
4 The
Th average lif
lifetime
i
off LED llamps iis d
defined
fi d as the
h number
b off h
hours when
h the
h lilight
h outpu
ut off 50% off a large
l
group off identical
id i l llamps goes b
below
l
70% off its
i iinitial
i i l lluminous
i
fl
flux
(L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage.
5 The Tc is defined as the highest permissible temperature which may occur on the outer su
urface of the LED lamp (in the indicated position) under normal operating conditions and at
the rated voltage/current/power or the maximum of the rated voltage/current/power range (D
DIN EN 62031: 2009-01)
PARATHOM® CLASSIC P40 frosted & clear
sparkling
BU LP PPM Led Lamps
For internal use only
2
www.osram.com
Product Information
PARATHOM® CLASSIC P40 frosted & clear sparkling
Application information
•
•
•
•
•
Suitable for indoor application.
ecial approved fixture are required.
For outdoor applications and operation in damp locations spe
Input voltage: 220-240V
Storage temperature & humidity conditions (-20°C up to +40°C
C, at max. 95% relative humidity)
Operating temperature & humidity conditions (-20°C up to +40
0°C, at max. 95% relative humidity)
Lamp conformity
•
•
•
•
•
•
•
•
•
•
•
2004/108/EC Electromagnetic compatibility (EMC)
244/2009 Ecodesign requirements for non-directional household lamps
IEC/ PAS 62612 Self ballasted LED-lamps for general lighting
g services – Performance requirements
2009/125/EC Ecodesign requirements for energy related prod
ducts
2011/65/EC Restriction of the use of certain hazardous substa
ances in electrical and electronic equipment (RoHS)
1907/2006 Registration, Evaluation, Authorisation and Restricction of Chemicals (REACH Regulation)
2002/96/EC Waste Electrical and Electronic Equipment Directtive (WEEE)
EN 62471 Photobiological safety of lamps and lamp systems
EN 55015 Limits and methods of measurement of radio disturrance
EN 61000-3-2 Electromagnetic compatibility – Limits for harm
monic current emission
EN 61000-3-3 Electromagnetic compatibility – Limitation of vo
oltage changes, voltage fluactuations, flicker in public low
voltage supply systems
• EN61547 Electromagnetic compatibility immunity requirementts
• 1194/2012 Eco design requirement for directional lamps, lightt emitting diode lamps and related equipment (DIM II)
• IEC 62560 self-ballasted LED-lamps for general lighting servicces by voltage >50V – Safety specifications
• 874/2012/EU Energy labeling of electrical lamps and luminaire
es
PARATHOM® CLASSIC P40 frosted & clear
sparkling
BU LP PPM Led Lamps
For internal use only
3