Download

FLAT-PAC™ 4
5mm Height Inductors
(Surface Mount)
Description
RoHS
2002/95/EC
• 155°C maximum total temperature operation
• Surface mount inductors designed for high speed,
high current switch mode applications requiring
lower inductance
• Gapped ferrite cores for maximum efficiency
• Inductance values from 0.100 uH to 0.200 uH
• Current range up to 64 Amps
• Meets UL 94V-0 flammability standard
• Ferrite core material
Applications
• Voltage regulator modules (VRMs) for servers,
microprocessors
• High frequency, high current switching power supplies
Environmental Data
• Storage temperature range: -40°C to +155°C
• Operating ambient temperature range: -40°C to +155°C
(range is application specific).
• Solder reflow temperature: +260°C max. for 10 seconds
max.
Part
Number
FP4-100-R
FP4-120-R
FP4-150-R
FP4-200-R
Rated
Inductance
µH
0.100
0.120
0.150
0.200
OCL (2)
± 15%
µH
0.100
0.120
0.150
0.200
Isat (5)
Amperes
Peak
64
54
42
30
Irms (4)
Amperes
Rated
Inductance
µH
0.090
FP4-090SK-R
OCL (2)
± 15%
µH
0.090
DCR
Ω @ 20°C
(Nom.)
0.00048
0.00048
0.00048
0.00048
40
40
40
40
DCR
Ω @ 20°C
(Max.)
0.00065
0.00065
0.00065
0.00065
Volts-µSec (3)
(VuSec)
(ref.)
1.33
1.33
1.33
1.33
4) DC current for an approximate ∆T of 40°C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, airflow, and
proximity of other heat generating components will affect the temperature rise. It
is recommended that the temperature of the part not exceed 155°C under worst
case operating conditions verified in the end application.
5) Peak Current for approximately 30% rolloff @ 20°C
1) Units supplied in Tape & Reel packaging; 900 parts on 13" diameter reel.
2) OCL (Open Circuit Inductance) Test parameters: 1MHz, .100Vrms,
0.0Adc & ISAT @20°C
3) Applied Volt-Time product (V-µS) across the inductor. This value represents the
applied V-µS at 500kHz necessary to generate a core loss equal to 10% of the
total losses for 40°C temperature rise.
Part
Number
Packaging
• Supplied in tape and reel packaging,
900 parts per reel
Isat (5)
Amperes
Peak
72
Irms (4)
Amperes
DCR
@ 25°C
33
0.423-0.517
Volts-µSec (3)
(Vus)
(ref.)
1.33
4) DC current for an approximate ∆T of 40°C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, airflow, and
proximity of other heat generating components will affect the temperature rise. It
is recommended that the temperature of the part not exceed 155°C under worst
case operating conditions verified in the end application.
5) Peak Current for approximately 20% rolloff @ 25°C
1) Units supplied in Tape & Reel packaging; 900 parts on 13" diameter reel.
2) OCL (Open Circuit Inductance) Test parameters: 100kHz, 1.0Vrms,
0.0Adc & ISAT @25°C
3) Applied Volt-Time product (V-µS) across the inductor. This value represents the
applied V-µS at 500kHz necessary to generate a core loss equal to 10% of the
total losses for 40°C temperature rise.
Mechanical Diagrams
TOP VIEW
SIDE VIEW
PCB PAD LAYOUT
1
Part Number
yyww R
FP4-XXX
FRONT VIEW
10.20
Max
1.0 min.
(2x)
5.00 Max
10.50
1.30 ref.
(2x)
2.50 (2x)
A
2
6.80
Max
4.50 (2x)
FP4-100-R
FP4-120-R
FP4-150-R
FP4-200-R
FP4-090SK-R
Dimension
“A” (mm) ref.
3.0
3.0
3.0
3.0
2.8
SCHEMATIC
1
2
FLAT-PAC™ 4
5mm Height Inductors
(Surface Mount)
Packaging Information
12.0
Ø1.50 Min.
2.00 ±0.1
0.35 ±0.05
Ø1.50 +0.1/-0.0
A
1.75±0.10
4.00
R0.30 Max.
Ao=7.20mm
Bo=10.60mm
Ko=5.40mm
FP4-XXX
yyww R
11.50±0.1
Bo
A
Ko
Ao
24.00
±0.3
R0.50 Typ.
User direction of feed
SECTION A-A
xxx = Inductance value
yww = Date code R = Revision level
Dimensions in Millimeters
Inductance Characteristics
OCL vs. Isat
100.0
75.0
% of OCL
FP4-100
FP4-150
FP4-200
50.0
FP4-120
25.0
0.0
0
10
20
30
40
50
Isat (Adc)
Inductance Rolloff vs Isat
100
% of OCL
75
FP4-090SK
50
25
0
0
5
10
15
20
25
30
35
40
Isat (Adc)
45
50
55
60
65
70
75
FLAT-PAC™ 4
5mm Height Inductors
(Surface Mount)
Core Loss
Irms Derating with Core Loss
0
20
40
50
70
10
0k
Hz
kH
z
3 00
z
500
kH
z
1.5
MH
z
80
1M
H
% of Losses from Irms (maximum)
60
90
92
94
95
96
97
98
99
10
20
30
40
50
60
80
100
200
300
400
500 600
800
1000
% of Applied Volt-µ-Second
PM-4119 3/07
© Cooper Electronic
Technologies 2007
Visit us on the Web at www.cooperbussmann.com
1225 Broken Sound Pkwy. Suite F Boca Raton, FL 33487
Tel: +1-561-998-4100 Toll Free: +1-888-414-2645 Fax: +1-561-241-6640
This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic
Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper
Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been
selected, it should be tested by the user in all possible applications.
Life Support Policy: Cooper Electronic Technologies does not authorize the use of any of its products for use in life support devices or systems without the
express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when
properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.