™ Valens Colligo VS2310 Product Brief ™ Overview The Colligo VS2310 is a high-end 5Play chipset that includes native USB 2.0 support and inter-device connectivity. The Colligo VS2310 chip’s proprietary HDI digital interfaces enable true multistreaming and daisy-chaining. The Colligo VS2310 fully complies with the HDBaseT ™ 2.0 Specification and supports the 5Play feature set for relaying audio, video, control, Ethernet, and power over a single up to 100m cable. The Colligo VS2310 is also backwards compatible with the HDBaseT ™ 1.0 Specification and all legacy HDBaseT ™ products. Architecture The Colligo VS2310 is comprised of two integrated chips: • Colligo VS2310TX – The transmitter chip is used for video and signaling in a source device, such as a Blu-ray player or STB. • Colligo VS2310RX – The receiver is used for video and signaling in a sink device, such as an LCD display or projector. The following block diagram illustrates the major Colligo VS2310 components: Colligo VS2310TX Auxiliary channel input Main channel output HDBaseT ™ HDBaseT ™ ADC DAC HDBaseT ™ TX PHY HDBaseT ™ Aux Link Processor CPU Subsystem HDBaseT ™ Main Link Processor UART DBG CPU T-Packets T-Packets GPIO CPU T-Packets WAKE CIR I²C MST1 SG/R/MII HDMI USB2.0 SPDIF GP UART TX H/D in/out MSIO I²S in/out Clk & reset HDII/O T-Adaptors e2prom I²C MST2 I²C SLV (CFG) I²C SLV Colligo VS2310RX Auxiliary channel output Main channel input HDBaseT ™ HDBaseT ™ ADC DAC HDBaseT ™ RX PHY HDBaseT ™ Aux Link Processor CPU Subsystem HDBaseT ™ Main Link Processor UART DBG CPU T-Packets T-Packets GPIO CPU T-Packets WAKE CIR I²C SLV1 SG/R/MII HDMI USB2.0 SPDIF GP UART RX H/D in/out MSIO I²S in/out Clk & reset HDII/O T-Adaptors e2prom I²C SLV2 I²C SLV (CFG) I²C MST Applications The Colligo VS2310 second generation high-end chip can be used in various applications throughout multiple industries. Main applications include HDMI / DVI extenders over CatX / fiber optics cables, NxK AV matrixes, AV receivers, HD projectors, industrial PCs, single wire TVs, two-box TVs, digital signage displays, multi-stream video switching / distribution / aggregation, daisy chaining, and delivering uncompressed video and controls over fiber optics (with the Colligo VS2311). The following diagram illustrates the HDBaseT ™ Gen 2.0 in a multi-stream video system: HDBaseT ™ TRANSFORMER + RJ45 CONNECTOR TRANSFORMER + RJ45 CONNECTOR Colligo VS2310TX Colligo VS2310RX IC Logic IC Logic HDII SG/R/MII T-Adaptors HDIO Monitor B HDMI Source B USBH HDMI HDII USB Device/Hub HDIO USB Host HDMI Monitor A SG/R/MII Source A SG/R/MII USBH T-Adaptors SG/R/MII HDMI T-Adaptors T-Adaptors IC Logic IC Logic The following diagram illustrates the HDBaseT ™ Gen 2.0 in a signage daisy chain system: HDBaseT ™ TRANSFORMER + RJ45 CONNECTOR TRANSFORMER + RJ45 CONNECTOR Colligo VS2310TX Colligo VS2310RX IC Logic HDIO HDMI HDII HDMI SG/R/MII T-Adaptors SG/R/MII T-Adaptors IC Logic Monitor A Source A (source A/B) HDIO HDII T-Adaptors IC Logic SG/R/MII T-Adaptors SG/R/MII HDMI Source B IC Logic Colligo VS2310TX TRANSFORMER + RJ45 CONNECTOR TRANSFORMER + RJ45 CONNECTOR HDBaseT ™ Colligo VS2310RX IC Logic HDII USBH HDMI Monitor B (source A/B) SG/R/MII T-Adaptors Key Technical Highlights Parameter Value Video Interfaces Fully compliant with HDMI 1.4 and HDMI 2.0. EDID adjustment mechanism for HDMI 2.0 at pixel clock higher than 340MHz Glueless interface to TMDS, DDC, CEC, and HPD HDMI signals HDMI Interface 100m Cat5e/Cat6 uncompressed HD video: • 4K / 2K, 30Hz, 24bpp • 4K / 2K, 60Hz, 24bpp with 4:2:0 pixel format 150m in long-reach mode: • 148.5Mhz HDMI pixel frequency • 1080p, 60Hz, 24bpp – uncompressed Audio Interfaces All formats supported by HDMI 1.4 and HDMI 2.0 All major digital audio formats, including: Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Dolby Pro Logic Iiz 7.1 & 9.1, and more Standard SPDIF, I²S Control Interfaces UART, IR, I²C (slave / master), MSIO-6 General Purpose fast serial channels, USB 2.0 HDII/O Interfaces 8Gbps inter-device connectivity HDBaseT ™ packets over inter-chip connection Glueless interface to Colligo VS2311 fiber optics devices Ethernet Interfaces 100BaseT, SGMII / RMII / MII System Interfaces RS232, I²C slave, I²C / SPI boot EEPROM USB 2.0 Configurable as host or device USB port, USB 2.0 standard compliant Power PoE (802.3af), PoE+ (802.3at), PoH Data Rate Auxiliary channel data rate of 250Mbps Full Duplex Max Traffic Rate 100m – 8 Gbps HDBaseT traffic rate 150m Long-Reach mode – 4 Gbps HDBaseT ™ traffic rate HDCP Supported Networking End device functionality for HDBaseT ™ 2.0 networking supported Daisy Chain Support for daisy chain connectivity of source and sink. Power Consumption Sleep – Low Power Mode #1 – 270 mW (RX), 220 mW (TX) Max power consumption – 5.0 w (RX), 3.5 w (TX) Junction Temp -40°C – +125°C Dimensions Colligo VS2310TX – Heat Slug BGA 21mm x 21mm Colligo VS2310 RX – Heat Slug BGA 23mm x 23mm Ball pitch – 1.0mm Contact Information 8 Hanagar St., POB 7152 Hod Hasharon 45240 Israel Tel: +972-9-762-6900 Fax: +972-9-762-6901 [email protected] www.valens.com ™