2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. OUTER COVER PANDUIT PART NO. WEIGHT DERLCC7009A 9.67 Kg/EA 21.32 LBS/EA REAR COVER B POWER DUCT INNER FRAME POWER DUCT BRACKET NOTES: 1. VISIT OUR ONLINE CATALOG AT WWW.PANDUIT.COM FOR A LIST OF CURRENT PARTS APPLICABLE FOR USE WITH THIS PRODUCT. 2. PRIMARY DIMENSIONS ARE METRIC (mm). DIMENSIONS IN PARENTHESES ARE IN INCHES (IN). 3. HIDDEN LINES REPRESENT SWITCH 4. PARTS SUPPLIED: 1 - INNER FRAME 1 - OUTER COVER 1 - HORIZONTAL STIFFENER 1 - REAR COVER 1 - CORNER BRACKET 1 - POWER DUCT 1 - POWER DUCT BRACKET 1 - HARDWARE KIT 5. INSTALLATION NOTE: FRONT TO BACK EQUIPMENT RAILS NEED TO BE 622.3 mm [24.5"] APART. 6. FOR USE WITH 1070mm DEEP N-STYLE CABINETS. B TITLE PANDUIT N-TYPE EXHAUST DUCT FOR THE CISCO 7009 (DERLCC7009A) A CUSTOMER DRAWING ITEM REVISION NAME 12V295AL/04 DATASET FILE NAME 12V295AL_DC/04A MATERIAL: D10100DA/16 N/A 04A 4-23-14 PBS MSH 02A 10-10-12 PJST LDR ADDED NOTE 6 V09000TS DRAWING NUMBER: MWH RELEASED TO PRODUCTION THIRD ANGLE PROJECTION 12V295AL DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN PJST DATE CHK 10-10-12 12V295AL SIZE SCALE LDR NONE 1 SHT 1 OF 3 A A 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. 95.00 624.84 3.740 24.600 B B 593.90 23.382 272.01 10.709 FRONT OF SWITCH (FACES COLD AISLE) 151.51 5.965 845.24 33.277 TITLE PANDUIT N-TYPE EXHAUST DUCT FOR THE CISCO 7009 (DERLCC7009A) A CUSTOMER DRAWING ITEM REVISION NAME 12V295AL/04 DATASET FILE NAME 12V295AL_DC/04A MATERIAL: D10100DA/16 N/A 04A 4-23-14 PBS MSH 02A 10-10-12 PJST LDR SEE SHEET 1 OF 3 FOR REVISIONS V09000TS DRAWING NUMBER: MWH RELEASED TO PRODUCTION THIRD ANGLE PROJECTION 12V295AL DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN PJST DATE CHK 10-10-12 12V295AL SIZE SCALE LDR NONE 1 SHT 2 OF 3 A A 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. EQUIPMENT RAILS SHOULD BE 622.3mm [24.5"] APART REAR COVER B B OUTER COVER POWER DUCT REAR OF CABINET (FACES HOT AISLE) FRONT OF CABINET (FACES COLD AISLE) A NOTE: FOR CABINETS ON CASTERS, UNIT CAN NOT BE INSTALLED IN RU'S 1 - 3. TITLE PANDUIT N-TYPE EXHAUST DUCT FOR THE CISCO 7009 (DERLCC7009A) CUSTOMER DRAWING ITEM REVISION NAME 12V295AL/04 DATASET FILE NAME 12V295AL_DC/04A MATERIAL: D10100DA/16 N/A 04A 4-23-14 PBS MSH 02A 10-10-12 PJST LDR SEE SHEET 1 OF 3 FOR REVISIONS V09000TS DRAWING NUMBER: MWH RELEASED TO PRODUCTION THIRD ANGLE PROJECTION 12V295AL DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN PJST DATE CHK 10-10-12 12V295AL SIZE SCALE LDR NONE 1 SHT 3 OF 3 A A