SC6 Package 6-Lead Plastic SC70 (Reference LTC DWG # 05-08-1638 Rev B) 0.47 MAX 0.65 REF 1.80 – 2.20 (NOTE 4) 1.00 REF INDEX AREA (NOTE 6) 1.80 – 2.40 1.15 – 1.35 (NOTE 4) 2.8 BSC 1.8 REF PIN 1 RECOMMENDED SOLDER PAD LAYOUT PER IPC CALCULATOR 0.10 – 0.40 0.65 BSC 0.15 – 0.30 6 PLCS (NOTE 3) 0.80 – 1.00 0.00 – 0.10 REF 1.00 MAX GAUGE PLANE 0.15 BSC 0.26 – 0.46 0.10 – 0.18 (NOTE 3) NOTE: 1. DIMENSIONS ARE IN MILLIMETERS 2. DRAWING NOT TO SCALE 3. DIMENSIONS ARE INCLUSIVE OF PLATING 4. DIMENSIONS ARE EXCLUSIVE OF MOLD FLASH AND METAL BURR 5. MOLD FLASH SHALL NOT EXCEED 0.254mm 6. DETAILS OF THE PIN 1 INDENTIFIER ARE OPTIONAL, BUT MUST BE LOCATED WITHIN THE INDEX AREA 7. EIAJ PACKAGE REFERENCE IS EIAJ SC-70 8. JEDEC PACKAGE REFERENCE IS MO-203 VARIATION AB SC6 SC70 1205 REV B