Teledyne WITHOUT DRIVER X FS Catalog CUSTOMER CUSTOMER P/N 2897R-PCB FSD WITH DRIVER DESCRIPTION MODEL NUMBER ASSIGNMENT SHEET (MNAS) OSCILLATOR TINY IG oscillator (PCB Mount), RoHS Compliant RF SPECIFICATIONS TUNING RANGE (GHz) POWER OUT (dBm) START 7[1] +5 POWER VARIATION OVER TUNERANGE (dB) 7 HARMONICS (dBc) -12 NON-HARMONICS (dBc) -70 TUNING LINEARITY ±20 TEMPERATURE DRIFT (MHz) ±50 HYSTERESIS (MHz) 25 FREQUENCY PUSHING (MHz/V) 2.0 FREQUENCY PULLING - 1.5:1 VSWR (MHz) 2.0 @ -100 SSB PHASE NOISE (dBc/Hz) 10 KHz 100 KHz @ -125 DC SPECIFICATIONS BIAS +5.0 n/a HEATERS n/a VDC @ VDC @ 70 n/a VDC @ MAX MHz MAX OR +/- MAX MAX TYP TYP MAX MAX TYP TYP X X X X X X MAX mA MAX TYP mA MAX TYP TYP TYP TYP @ 25 ° C STEADY STATE RESISTANCE (Ohms) INDUCTANCE (mH) DRIVER COMM TYP MAX X X TYP MIL SENSITIVITY (KHz/mA) TYP 3 dB BANDWIDTH (KHZ) TYP RESISTANCE (Ohms) INDUCTANCE (uH) OR MIL(S) X % ANALOG CIRCUIT POWER MAX X FM COIL MAX 300 400 1 1 TYP MIN MAX MAX ±15 % X TYP X X TYP TYP DIGITAL TO TUNING VOLTAGE (V) FROM X SCREENING TUNING COIL X % MAX MAX MAX mA ENVIRONMENTAL SPECIFICATIONS TEMP RANGE +10 DEG C TO +60 DEG C 8.5 6 9 STOP MAX MAX mA SURGE AT TURN-ON SENSITIVITY (MHz/mA) 11 TO MIN NO. OF BITS VDC @ VDC @ mA, MAX mA, MAX START WORD STOP WORD VDC @ mA, MAX LATCHING TRANSPARENT EDGE TRIG LEVEL TRIG OUTLINE IN-051697-000 PRODUCT CODE OTHER SPECS: (1) Zero current frequency to be 9.5GHz +/- 300MHz CONTROLLING DOCUMENT ASSIGNED BY MLK CUSTOMER DATE (SCD NO. IS 6/6/2011 ) REV 1 MLK X TELEDYNE 6-17-2013