Teledyne WITHOUT DRIVER X FS Catalog CUSTOMER CUSTOMER P/N 3005R-PCB FSD WITH DRIVER DESCRIPTION MODEL NUMBER ASSIGNMENT SHEET (MNAS) OSCILLATOR TINY IG oscillator (PCB Mount), RoHS Compliant RF SPECIFICATIONS TUNING RANGE (GHz) POWER OUT (dBm) START POWER VARIATION OVER TUNERANGE (dB) HARMONICS (dBc) NON-HARMONICS (dBc) TUNING LINEARITY TEMPERATURE DRIFT (MHz) HYSTERESIS (MHz) FREQUENCY PUSHING (MHz/V) FREQUENCY PULLING - 1.5:1 VSWR (MHz) 10[1] 100 KHz VDC @ VDC @ 70 n/a VDC @ MAX MHz MAX OR +/- MAX MAX TYP TYP MAX MAX TYP TYP X X X X X MAX MAX X mA MAX mA MAX TYP mA MAX TYP TYP @ 25 ° C STEADY STATE COMM TUNING COIL RESISTANCE (Ohms) INDUCTANCE (mH) DRIVER TYP MAX MAX X X CIRCUIT POWER MAX X TYP MIL FM COIL SENSITIVITY (KHz/mA) TYP 3 dB BANDWIDTH (KHZ) TYP RESISTANCE (Ohms) INDUCTANCE (uH) OR MIL(S) X % ANALOG 350 400 1 1 TYP MIN MAX MAX ±15 % X TYP X X TYP TYP DIGITAL TO TUNING VOLTAGE (V) FROM X SCREENING ENVIRONMENTAL SPECIFICATIONS TEMP RANGE +10 DEG C TO +60 DEG C 11.5 X 10.5 30 % MAX TYP TYP mA SURGE AT TURN-ON SENSITIVITY (MHz/mA) STOP MAX MAX [2] @ 20.5 TO MIN @ SSB PHASE NOISE (dBc/Hz) DC SPECIFICATIONS BIAS +5.0 n/a HEATERS n/a +3 13 -12 -70 ±35 ±60 60 2.0 2.0 NO. OF BITS VDC @ VDC @ mA, MAX mA, MAX START WORD STOP WORD VDC @ mA, MAX LATCHING TRANSPARENT OUTLINE IN-051699-000 OTHER SPECS: EDGE TRIG PRODUCT CODE LEVEL TRIG YIGs 1) Zero current frequency to be 15.5GHz +/- 500MHz [2] -123 dBC/Hz to 16GHz,-120 dBc/HZ to 18.4GHz,-118dBc/Hz to 20.5GHz CONTROLLING DOCUMENT ASSIGNED BY MLK CUSTOMER DATE (SCD NO. IS 5/13/2013 ) REV -1 X TELEDYNE MLK 4-30-14